I just downloaded the Complete version of IntelliJ,
I imported my settings from the community version.
I checked in the editor tab settings, nothing craz going on.
I tried changing the position but still it had issues...
But my editor tabs are not showing correctly, cany anyone help?
Ahh, this was fixed with an update to the Materials Plugin. Make sure to keep updated!
When editing a CSV file in PhpStorm, I enabled "Edit as Table" and can not find how to close this mode. I do not know how to close the "Data" tab.
Help me please!
Linux Mint, Phpstorm v.2018.1.6
The "Edit as Table" creates a split pane. Assuming you dont have any other panes open, you can close them all by:
ctrl+shift+a
Search for Unsplit all
Ta-da
While still destructive (if you use multiple panes), it doesnt go full scorched earth policy like #jocull recommends.
I had a similar issue in WebStorm and reached this thread. After painful searching I found these buttons to toggle between views in the bottom left:
I looked all over but couldn't find a way to do this. In the end it was bugging me so much that I just dropped the Jetbrains/IntelliJ project files and recreated them. This is a very heavy hammer for this problem.
If you have a Git repository this is usually as simple as...
Close your project if it is open
git clean -idx and select the project files to remove (carefully, if you have stuff you don't want to clean out! this deletes things!)
Reopen the project and let it regenerate the project files from scratch
Tada! No more table editor mode. You may lose debugging profiles or other project specific settings, and YYMV :)
I'm using IntelliJ IDEA on my Mac to work on a project, and I keep on coming across an issue where I can't type. Occasionally when I switch to another application and then switch back to IntelliJ I can't type anything, and the cursor doesn't appear on text when I click on things. Does anyone know what causes this? After 1-2 minutes it goes back to normal, but it's started happening more frequently and it's pretty frustrating to not be able to type and have no way to fix it.
This is the version of IntelliJ I'm using:
IntelliJ IDEA 2016.1.3
Build #IC-145.1617, built on June 3, 2016
JRE: 1.8.0_76-release-b198 x86_64
JVM: OpenJDK 64-Bit Server VM by JetBrains s.r.o
Turn off Vim Emulator from Tools in the IntelliJ, like this picture:
I am encountering this issue aswell, ...
MAC os Mojave 10.14.2, Inteliij Community 2018.3.5
Aside from restarting / clearing caches, I found that cmd + leftShift + F still opens the search window, and all my keystrokes appeared in the searchbox!
After the searchshortcut, I was able to close the searchbox and work again!
The answer here helped me https://intellij-support.jetbrains.com/hc/en-us/community/posts/206152119-Can-t-type-in-editor-window
Quoting the author of the answer:
I had the same problem. It goes away after I click the icon at top of
the scroll bar. it happens frequently on windows 7/10, and
occasionally on mac. my colleagues said they have experienced it too
Have the same issue occasionally, can't type in any Intellij windows. My temporary/quick fix, is to:
Close any terminal windows in intellij
Use cmd+shift+f to pull up the search window.
Seems to fix it, for a while.
Closed IDEA, all IDEA projects! Even though in other IDEA windows I could type.
Removed .idea folder in the project I could not edit.
Restarted IDEA.
Then I was able to type!
Maybe you entered Vim emulator as said. Maybe only by mistake :).
Control-V is a frequently used shortcut. And Control-Alt_V is the shortcut to enable Vim mode so you can see the problem...
How to know in five seconds: type a ":" (colon) and if the cursor jump to end of the screen, that is vim. If so enter q to quit and then Control-Alt-V (on windows) to go back to IDEA standard mode.
vi is a powerful text editor since ever. But only if you pretend and know how to use it... There is even a warning on the IDEA install saying like "do not install unless you are familiar with Vim" in yellow bold text, iirc.
[Follows historic data, that you may find boring off-topic or interesting]
Today's editors opens the code in edit mode right away so you can start typing over existing code. Vim by the other hand opens the code in, let us say, browsing mode: there is a set of navigation keys to browse the code. Everything you type is supposed to be a command. When you want to edit you enter INSERT mode and then you can type new text. Only then.
Just for more historic data: vi navigation mode is great for studying code you do not know, using IDEA, since it does not change the text unless you tell it to, and some vi commands are clever.
One example:
"/" (forward slash) is one search command, and "z" is a smart scroll command so that:
/setCellFactory will search for the next match of "setCellFactory" and put the cursor there
Then if you type "z" the code will be positioned so that line is the first on screen. And if you type "." the line will be at the middle. And if you type "-" that line will be at the last position at the screen. And you can use these commands again and again. And new slash will go for the next match, like F3
This "z" thing is a feature I miss in Visual Studio, IDEA, Eclipse, Word, WordPad: these commands to scroll text AROUND a pattern... /pattern, z, z., z-. The alternative is the mouse wheel...
I am used to vi since the 80's and is the editor I still use today on Linux terminals so when this happened to me on IDEA I was lucky to remember and suspect of that on the first time.
Sorry if these details are boring
Ensure you haven't unintentionally enabled vim emulation. Go to IntelliJ Idea -> Preferences and select Plugins. Scroll down and look for the vim emulation plugin and if it's checked, then either uncheck it or uninstall it completely.
Ran into same issue with intelliJ 2017.1.2, but no VIM Plugin. However, I had just created an empty project with some .groovy files. I could edit the files in the groovy project, but not java projects.
Only way I could fix java projects, was blow-away workspace.xml files in each, then I could edit again. However, had to re-create tomcat configs, breakpoints, other IDE settings. etc.
I had a problem with entering characters when working with .story files. When I tried to type in any character, it appeared for a short while and immediately disappeared. The cause of the problem was jbehave plugin I was using. After uninstalling it and restarting IntelliJ everything was fine.
It seems to be because another window has the cursor and is not giving it back.
Check any open floated windows, click on them & then click back to your intellij instance
alternatively, if you have multiple intellij instances open the cursor could be there...
Go to the most recently opened IntelliJ instance
Check if the cursor has become stuck in that project's terminal window, or another window
no? check all other open IntelliJ instances
For me it happened because of vim
Om Mac, I solved it by navigating to File → Reload All from Disk.
Keyboard shortcut: ⌥ ⌘ Y
IntelliJ IDEA 2020.1.4
Try disabling plugins one at a time. It was the "BashSupport Pro" plugin that caused it for me. Disabled it and I could type again right away.
I read other comments saying some other plugins caused the issue as well.
Coming from a Visual Studio environment and Xcode environment, if you highlight a file on the project window (LHS), the file opens. IntelliJ doesn't open a file until you double click it.
It's kind of a different feel since it opens it up in a new tab each time vs just using the last active window or a preview window to flip between files. Is there a way to make it more like VS or Xcode that where highlighting the file actually opens the file in the current window?
There is Autoscroll to Source option in the project view settings. Unfortunately it doesn't open the focused files in the current tab, but in new tabs.
I haven't found an option to change this behavior anywhere, but there is already a feature request on IntelliJ's YouTrack asking for this, so feel free to vote for it :)
My first day using this IDE...
is there a way to configure the IDE to open files in the project by double click? It is rather painful having to drag files from the project overview into the editor window.
You can change the KeyMap.
Go to File->Settings and find the keymap section.
You will have to create a new KeyMap by clicking copy, and then look in the View section for "Jump to Source" and change/add the keymap you want.
However, as Bozhidar Batsov noted, double clicking may not always work so well. Whether it works may vary by OS and/or windowing system. I have no trouble with it in Mac OS X, but it doesn't seem to work well in openSUSE.
There are also other predefined keymaps that you can select from this settings screen. They're set up to resemble other IDEs, so you might find them helpful if you're transitioning from something else.
It is easy way to do in windows.
I found a great solution to this problem by Jelmer Kuperus over at Orange11.
Create an .Xresources file in your home directory. Add the following line:
*multiClickTime: 400
Jelmer explains that this setting changes the default double-click speed from 200ms to 400ms, effectively slowing it down. Save the file and then run:
xrdb ~/.Xresources
The effect is immediate, no need to logout or reboot. Double-click in Intellij works as expected. I did try changing the mouse double-click speed in System Settings first before trying this out to see if that made a difference but it did not.
I am using Ubuntu 11.04, Intellij 10.5.2, and Sun JDK 1.6.0_26. YMMV
Use F4 to open quickly the selected files. Btw double clicking on files should work as well(at least in theory). Swing's buggy handling of such events, however, causes the double click to not always work in IDEA, so I eventually stopped double clicking and switched to using F4. You can also use "Autoscroll to source" from the projects menu - this will open the source files as soon as you select them in the project browser.