I am trying to copy a dynamic range (B12:Lxx)from one worksheet to another. I need the range being copied to stop at the first empty row (there is additional data further down the sheet which I don't want copied).
I am a very basic VBA user so if you could explicitly set out your instructions that would be handy.
Source: Worksheet "MyKPIs" with the dynamic range B12:Lxx (column L is set, row numbers are variable BUT must end at the first empty row)
Target: Worksheet "Month Template", cell B5
Trigger would be a command button
I have trawled through other articles but have failed to find anything that I could use.
Thanks,
Hayley
this will work. insert a command button on your worksheet. double click the button. paste in this code between sub and end sub.
Worksheets("MyKPIs").Range("b12").CurrentRegion.Copy Worksheets("Month Template").Range("b5")
it should look like this when you are through. then go to your worksheet on developer tab toggle off design mode then click the button.
Private Sub CommandButton1_Click()
Worksheets("MyKPIs").Range("b12").CurrentRegion.Copy Worksheets("Month Template").Range("b5")
End Sub
for those inexperienced with currentregion please look at the 2 samples below that have blank cells but the region is selected and you can easily see the beginning and ending points in the range and how an entire blank row or column forms the range.
Place a command button from the Forms toolbar on your "MyKPIs" sheet.
Then add this code:
Sub Button1_Click()
Dim myrange
Set myrange = Sheets("MyKPIs").Range("B12:L12")
myrange.Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy Worksheets("Month Template").Range("B5")
End Sub
Considering all cells in column B have data, this will copy all the cells in the range. It will stop at the first empty cell in column B. This should help you to start.
Related
im looking for some basic help with VBA. I have created a userform for fellow members to fill out information when we go on a call. When ok is pressed, the data is sent to sheet2 and laid in the next open row. In sheet 3 i have the printable form of the userform that i made out. I am trying to write the vba code in the printable form, so when the call # changes in cell b2, it will automatically change all other cells in that form, with the corresponding data in the same row from sheet 2.
Im new to the forum so im not sure how to upload etc. but i will try and give an example below.
Sheet2 looks something like this, for the example each cell seperated by "."
18-170001.01/02/17.Accident."current address"."call info"
18-170002.01/02/17.Training."current address"."call info"
in sheet4 this is the code i am using and it is not working
Private Sub Worksheet_Change(ByVal Target As Range)
Dim i As Long
For i = 5 To Row.Count
If sheet4 .cells(b2).value=sheet2.Cells(i,1).value then
sheet4.cells(e2).value=sheet2.cells(i,1).value
End If
Next i
End Sub
I would add additional if then statments for each cell in sheet 4 to match each cell in sheet 2.
Please any help is appreciated
You can't use Cells(b2), it needs to be Range("B2") or Cells(2, "B") or Cells(2, 2).
So your code could be:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim i As Long
For i = 5 To Row.Count
If sheet4.cells(2, "B").value=sheet2.Cells(i,1).value then
sheet4.cells(2, "E").value=sheet2.cells(i,1).value
End If
Next i
End Sub
But you would be better off just using a formula for this purpose instead. For example, the above code could be replaced by having the following formula in cell E2 of sheet4:
=VLOOKUP(B2,Sheet2!A:A,1,FALSE)
(That assumes that sheet2 has a sheet name of "Sheet2".)
I have created a macro that adds a prefix to the current selection. It's pretty simple as you can see - it loops through visible cells in the selection. I added the .SpecialCells(xlCellTypeVisible) because it was affecting unintended cells when using filters.
Sub Prefix()
Dim rng As Range
Dim Prefix As String
Prefix = "P"
For Each rng In Selection.SpecialCells(xlCellTypeVisible)
rng = Prefix & rng
Next rng
End Sub
As an example, assume that my data is Cells A1:A4 filled out like this:
Title
1
2
1
My problem occurs when I do the following:
Put an Autofilter on the range, and hide the '2' that is in A3
Select A2 (the first '1')
Run my macro
The problem is that instead of affecting only Cell A2 (the selected cell), it starts applying the prefix to the first row (A1:Z1 , etc.) until I cancel the macro. It will keep doing this to thousands of cells if I let it keep running.
This problem doesn't happen when my selection is multiple cells, or if I use Selection rather than Selection.SpecialCells(xlCellTypeVisible), or if I apply the macro to one cell when nothing is being filtered out (hidden).
Does anyone have any ideas why the selection defaults to the whole spreadsheet when I only have one cell selected?
Alternatively, can anyone suggest a way to add prefixes like this using VBA?
I am aware that using an excel formula would alleviate the problem but that is not practical for me and regardless is not as fast as clicking a macro.
You can use 'Application.intersect' to make sure you get your desired result:
For each rng in Application.Intersect(Selection,ActiveSheet.Cells.SpecialCells(xlCellTypeVisible))
If you want this to work dynamically when you select a range of cells manually AND your intent is to just prepend the country code from the input box to the current value of the cell, then add the change event posted below to the code section of your worksheet and add the routine to a code module in the workbook.
Not sure why you are doing the replace of the minus sign, but you can add it to this code if needed.
Worksheet code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Call AddPrefix(Target)
End Sub
Add a module and put this code in it.
Sub AddPrefix(rangeToPrefix)
Dim cCell As Range
Dim prefix As String
prefix = InputBox("Enter your country code", "Set Country Code", +33)
For Each cCell In rangeToPrefix.SpecialCells(xlCellTypeVisible)
If Not IsEmpty(cCell) Then cCell.Value = prefix & cCell.Value
Next cCell
End Sub
The Problem
Assume that the active cell contains a formula based on the INDEX function:
=INDEX(myrange, x,y)
I would like to build a macro that locates the value found value by INDEX and moves the focus there, that is a macro changing the active cell to:
Range("myrange").Cells(x,y)
Doing the job without macros (slow but it works)
Apart from trivially moving the selection to myrange and manually counting x rows y and columns, one can:
Copy and paste the formula in another cell as follows:
=CELL("address", INDEX(myrange, x,y))
(that shows the address of the cell matched by INDEX).
Copy the result of the formula above.
Hit F5, Ctrl-V, Enter (paste the copied address in the GoTo dialog).
You are now located on the very cell found by the INDEX function.
Now the challenge is to automate these steps (or similar ones) with a macro.
Tentative macros (not working)
Tentative 1
WorksheetFunction.CELL("address", ActiveCell.Formula)
It doesn't work since CELL for some reason is not part of the members of WorksheetFunction.
Tentative 2
This method involves parsing the INDEX-formula.
Sub GoToIndex()
Dim form As String, rng As String, row As String, col As String
form = ActiveCell.Formula
form = Split(form, "(")(1)
rng = Split(form, ",")(0)
row = Split(form, ",")(1)
col = Split(Split(form, ",")(2), ")")(0)
Range(rng).Cells(row, CInt(col)).Select
End Sub
This method actually works, but only for a simple case, where the main INDEX-formula has no nested subformulas.
Note
Obviously in a real case myrange, x and ycan be both simple values, such as =INDEX(A1:D10, 1,1), or values returned from complex expressions. Typically x, y are the results of a MATCH function.
EDIT
It was discovered that some solutions do not work when myrange is located on a sheet different from that hosting =INDEX(myrange ...).
They are common practice in financial reporting, where some sheets have the main statements whose entries are recalled from others via an INDEX+MATCH formula.
Unfortunately it is just when the found value is located on a "far" report out of sight that you need more the jump-to-the-cell function.
The task could be done in one line much simpler than any other method:
Sub GoToIndex()
Application.Evaluate(ActiveCell.Formula).Select
End Sub
Application.Evaluate(ActiveCell.Formula) returns a range object from which the CELL function gets properties when called from sheets.
EDIT
For navigating from another sheet you should first activate the target sheet:
Option Explicit
Sub GoToIndex()
Dim r As Range
Set r = Application.Evaluate(ActiveCell.Formula)
r.Worksheet.Activate
r.Select
End Sub
Add error handling for a general case:
Option Explicit
Sub GoToIndex()
Dim r As Range
On Error Resume Next ' errors off
Set r = Application.Evaluate(ActiveCell.Formula) ' will work only if the result is a range
On Error GoTo 0 ' errors on
If Not (r Is Nothing) Then
r.Worksheet.Activate
r.Select
End If
End Sub
There are several approaches to select the cell that a formula refers to...
Assume the active cell contains: =INDEX(myrange,x,y).
From the Worksheet, you could try any of these:
Copy the formula from the formula bar and paste into the name box (to the left of the formula bar)
Define the formula as a name, say A. Then type A into the Goto box or (name box)
Insert hyperlink > Existing File or Web page > Address: #INDEX(myrange,x,y)
Adapt the formula to make it a hyperlink: =HYPERLINK("#INDEX(myrange,x,y)")
Or from the VBA editor, either of these should do the trick:
Application.Goto Activecell.FormulaR1C1
Range(Activecell.Formula).Select
Additional Note:
If the cell contains a formula that refers to relative references such as =INDEX(A:A,ROW(),1) the last of these would need some tweaking. (Also see: Excel Evaluate formula error). To allow for this you could try:
Range(Evaluate("cell(""address""," & Mid(ActiveCell.Formula, 2) & ")")).Select
This problem doesn't seem to occur with R1C1 references used in Application.Goto or:
ThisWorkbook.FollowHyperlink "#" & mid(ActiveCell.FormulaR1C1,2)
You could use the MATCH() worksheet function or the VBA FIND() method.
EDIT#1
As you correctly pointed out, INDEX will return a value that may appear many times within the range, but INDEX will always return a value from some fixed spot, say
=INDEX(A1:K100,3,7)
will always give the value in cell G3 so the address is "builtin" to the formula
If, however, we have something like:
=INDEX(A1:K100,Z100,Z101)
Then we would require a macro to parse the formula and evaluate the arguments.
Both #lori_m and #V.B. gave brilliant solutions in their own way almost in parallel.
Very difficult for me to choose the closing answer, but V.B. even created Dropbox test file, so...
Here I just steal the best from parts from them.
'Move to cell found by Index()
Sub GoToIndex()
On Error GoTo ErrorHandler
Application.Goto ActiveCell.FormulaR1C1 ' will work only if the result is a range
Exit Sub
ErrorHandler:
MsgBox ("Active cell does not evaluate to a range")
End Sub
I associated this "jump" macro with CTRL-j and it works like a charm.
If you use balance sheet like worksheets (where INDEX-formulas, selecting entries from other sheets, are very common), I really suggest you to try it.
I have a two (very long) TO-DO lists- one going across and the other going down.
What i want to achieve is for a blank cell to appear at the start of the list instead of having to scroll to the end of the lists to enter a new item.
So then when i have entered an item in a cell and hit enter, i want the cell just populated to move down the list (or across if i hit tab) and a new empty cell to appear at the start of the list.
It would be useful for the new blank cell to be pre-populated with the current date but that is not essential.
Thanks for your help.
NOT FOR POINTS.
Piggy-backing on Gary's answer, the mistake is that you set A to Range("C4:C6"). What happens is, when you enter data into any of C4, C5, and C6, they are all moved to the right because of A.Insert, which refers to all the cells assigned to A.
The trick here is to fully qualify your requirements for Target. Let's say you have a table from B1:E3, like below:
Now, let's say you want to move row 1 if you enter something into A1, row 2 if A2, etc. The following macro should do it (notice the difference with Gary's macro):
Private Sub Worksheet_Change(ByVal Target As Range)
Dim QualifyingRange As Range
'Dim OrigRng As String
Set QualifyingRange = Range("A1:A3")
If Intersect(Target, QualifyingRange) Is Nothing Then Exit Sub
Application.EnableEvents = False
'OrigRng = Target.Address
Target.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
'Range(OrigRng).Value = Date
Application.EnableEvents = True
End Sub
What is the difference in the above? Very simple but very important. When a Worksheet_Change is in a sheet's code, every time you do a valid change to the sheet, the macro fires. The range you just edited will be known to the macro as Target. Now, usually, if you don't declare what the qualifications for Target are, the Worksheet_Change macro just fires indiscriminately. How do we qualify Target properly then?
We use Intersect. First, we declare a range of cells that we want to track. These cells, when changed, should fire the macro. Otherwise, macro is kaput. This line: If Intersect(Target, QualifyingRange) Is Nothing Then Exit Sub basically reads: If Target is not inside my desired range, then nothing happens.
This is the reason why I declared A1:A3 as my QualifyingRange. This way, if my change is to any of the cells above, the macro will fire. HOWEVER, .Insert should not be applied to the whole range but to Target alone. This is because if we do QualifyingRange.Insert, every time a change is detected in any cells in A1:A3, all three rows will move. This is what happened when you set A to three cells and kept A.Insert.
Hopefully, this clears up the confusion. Let us know if this helps.
Here is a partial solution. The following event macro monitors entry to cell A1 . Once you have entered a value in A1, the macro "pushed" the values in column A down by one. This means that value you just entered has been pushed down to A2 and A1 is empty:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim A As Range
Set A = Range("A1")
If Intersect(A, Target) Is Nothing Then Exit Sub
Application.EnableEvents = False
A.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Application.EnableEvents = True
End Sub
Because it is worksheet code, it is very easy to install and automatic to use:
right-click the tab name near the bottom of the Excel window
select View Code - this brings up a VBE window
paste the stuff in and close the VBE window
If you have any concerns, first try it on a trial worksheet.
If you save the workbook, the macro will be saved with it.
If you are using a version of Excel later then 2003, you must save
the file as .xlsm rather than .xlsx
To remove the macro:
bring up the VBE windows as above
clear the code out
close the VBE window
To learn more about macros in general, see:
http://www.mvps.org/dmcritchie/excel/getstarted.htm
and
http://msdn.microsoft.com/en-us/library/ee814735(v=office.14).aspx
To learn more about Event Macros (worksheet code), see:
http://www.mvps.org/dmcritchie/excel/event.htm
Macros must be enabled for this to work!
EDIT#1
To push across rather than down:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim A As Range
Set A = Range("A1")
If Intersect(A, Target) Is Nothing Then Exit Sub
Application.EnableEvents = False
A.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Application.EnableEvents = True
End Sub
To handle multiple cells, you must specify which cells get pushed across and which cells get pushed down.
I'm currently building a small project planner in Excel that uses the current date to plot coloured blocks under a date column to depict which stage of the project we are currently at for a particular customer (see image below).
Behind each of the coloured blocks is a drop-down menu populated by a list on another sheet. My aim is to search for the current date in cell A1 ( populated using today() ) within all columns that follow the freezed panes (depicted by the black right hand border). When the current date is found, the value of in each of the coloured blocks should be copied into the corresponding cells so that as the project progresses, a line of coloured blocks are entered for each day (with the relevant text from the drop-down depicting the current stage of that block).
Currently I am using the following formula copied into all cells that follow the freeze:
=IF(F$1 = $A$1,$C2,"")
However, when the current date is changed this merely moves the copied blocks across to the relevant column without maintaining the old values from previous days.
I've also attempted this with a VLOOKUP so that I can enter it into a macro and run if from a button but the layout does not allow for a successful VLOOKUP.
The simplest solution I believe would be to have a button that allows the user to save the current state of the column with a header that matches the current date however it has been some time since I have coded in VBA and do not remember how to do this.
Any ideas? Thanks in advance.
Not sure if this is exactly what you're looking for, but here goes...
Sub ColorCode()
Dim ws As Worksheet
Dim rng As Range
Dim cel As Range
Set ws = ThisWorkbook.Sheets("SheetNameHere")
Set rng = ws.Range("F1:I1")***
For Each cel In rng
If cel.Value = ws.Range("A1").Value Then
ws.Range("C2:C8").Copy
ws.Range(Cells(2, cel.Column), Cells(8, cel.Column)).PasteSpecial Paste:=xlPasteValues
ws.Range(Cells(2, cel.Column), Cells(8, cel.Column)).PasteSpecial Paste:=xlPasteFormats
End If
Next
End Sub
If you add that to a new module, you can assign it to a command button. I haven't had a chance to test it, but it cycles through the dates in the first row to see if they match the date in A1. If they do, it copies over the values and formats from C2:C8(change if you need to) into the rows underneath that date. You may need to change some of the ranges to suit your specific worksheet.
So your requirements seem fairly straightforward to me:
you need the tracker to identify the column with today's date
you need to establish a permanent value for each day as it occurs
you need the color of today's values to be added to the cell, and stay that way even after today's date has passed.
The formula you cite in your question, if copied across all cells, will clearly just provide a value on the column for today's date, and unless you use a circular reference to let it self assess and update its value on today's date, it will not retain information when tomorrow comes.
Your idea for a button would work if you want the user to control the time of update, or you could have code that runs either when the workbook opens or when the worksheet itself is activated (placing it in the appropriate object code under either Private Sub Worksheet_Activate() or Private Sub Workbook_Activate().
I think PermaNoob has a right idea of copying the value of the column and pasting the value (rather than the formlula) into that column, but what is missing is appropriate identification of the column containing today's date and the coloring of those cells (if you don't have some method of coloring them that you did not mention). Something like this might work either attached to a button as you suggest, or to the _Activate event as I suggest. This is untested but should give you an idea of how to approach it:
Sub UpdatePlanner()
'~~>dim variables and set initial values
Dim wb As Workbook
Set wb = Workbooks("NAME or INDEX of YOUR workbook")
Dim ws As Worksheet
Set ws = wb.Worksheets("NAME or INDEX of YOUR sheet")
Dim rngHeader As Range
Set rngHeader = ws.Range("F1", ws.Range("F1").End(xlToRight))
Dim rngDate As Range
Dim rngColumn As Range
Dim rngCell As Range
'~~>loop to find the column with today's date
For Each rngDate In rngHeader
If rngDate.value = ws.Range("A1").value Then
Set rngColumn = ws.Range(rngDate.Address, _
ws.Range(rngDate.Address).Offset(65536, 0).End(xlUp)) 'this assumes
'your column may not have a value in every row
Exit For
End If
Next rngDate
'~~>copy and paste the column values and formats
With rngColumn
.Copy
.PasteSpecial Paste:=xlPasteValues
.PasteSpecial Paste:=xlPasteFormats
End With
'~~>loop to add the color formatting (since I don't see this in your formula)
For Each rngCell In rngColumn
If rngCell.value = ws.Range(Cells(rngCell.Row, 3)).value Then
rngCell.Interior.Color = _
ws.Range(Cells(rngCell.Row, 3)).Interior.Color
End If
Next rngCell
End Sub