This is a very tricky question, because when we check the rules it's not explicit that a repository couldn't call an UseCase. However, it doesn't seem logical.
Is there any definition/good practices and why it shouldn't do this?
Thanks!
The short answer is "No" - it shouldn't, regardless of the context (in most of all cases). As to why - the definitions, principles and good practices - it may be helpful to think in terms of clear separation of concerns across your whole Clean Architecture implementation.
Consider this illustration, as background at thinking about how one could organize the interactions (and dependencies) between main parts of a Clean Architecture.
The main principles illustrated are, that -
Through its execution, the Use Case has different "data needs" (A and B). It doesn't implement the logic to fulfill them itself (since they require some specific technology). So the Use Case declares these as two Gateway-interfaces ("ports"), in this example. And then calls them amidst its logic.
Both of these interfaces declare some distinct set of operations that should be provided (implemented) from "outside". The Use Case, in its logic, needs and invokes all of those A and B operations. They are separated into A and B, because they are different kinds of responsibilities - and might be implemented by different parts of the system (but not necessarily). Let's say that the Use Case needs loading of persisted domain objects (as part of A operations), but it also needs to retrieve configuration (as some key-value pairs), which are B operations. These interfaces are segregated since both sets of operations serve distinct purposes for the Use Case. Anyhow, it's important design-wise, that they both explicitly "serve" the Use Case needs - meaning, they are not generic entity-centric DAO / Repository interfaces; they ONLY have operations that the Use Case actually needs and invokes, in exactly the shape and form (parameters, return values) that the Use Case specifically needs them. They are "ports" to be "plugged into", as part of the whole Use Case.
The "outside" providers of these responsibilities are the Adapters (the implementers) of those needs. To fulfill them, they typically use some specific technology or framework - a database, a network call to some server, a message producer, a file operation, Spring's configuration properties, etc.
The Use Case is invoked (called) only by Drivers side of the architecture (that is, the initiating side). The Use Case itself, in fact, is one of the "initiators" for its further collaborating parts (eg, the Adapters).
On the other hand, the Use Case is "technically supported" (the declared parts of its needs "implemented") by Adapters side of the architecture.
Effectively, there is a clear separation of who calls what - meaning, at runtime the call stack progresses in a clear directional flow of control across this architecture.
The flow of control is always from Drivers towards Adapters (via the Use Case), never the other way around.
These are principles I have learned, researched, implemented and corrected purely across my career in different projects. In other words, they've been shaped by the real world in terms of what has been practical and useful - in terms of separation of concerns and clear division of responsibilities - in my experience. Yours naturally may differ, and there is no universal fit - CA is not a recipe, it is a mindset of software design, implementable in (better and worse) several ways.
Thinking simply though, I would imagine in your situation Repository is your "data storage gateway" implementation of the Use Case's (Data) Gateway. The UC needs that data from "somewhere" - without caring where it comes from or how its is stored. This is very important - the whole core domain, along with the Use Case needs to be framework and I/O agnostic.
Your Repository fulfills that need - provides persisted domain objects. But the Use Case must not call it directly, instead it declares a Gateway (in Hexagonal eg Ports & Adapters architecture, named a Port) - with needed operation(s) that your Repository needs to implement. By using some specific (DB / persistence) technology, your Repository fulfills it -it implements one of the Use Case's "ports", as an Adapter.
With the above being said - on rare occasions, some Gateway implementations may demand exceptions. They might need several back-and-forth-going interactions, even across your architecture. They are rare and indeed complex situations - likely not necessary for a Repository implementation.
But, if that is really an inevitable case - then it's best if the Use Case, when calling the Gateway, provides a callback
interface as a parameter of the call. So during its processing the Gateway's implementer can call back using the operations in that interface - effectively implementing the back-and-forth necessity. In most of all cases though, this implies excessive logic and complexity at the adapters' level, which should be avoided - and serves as a strong cue that the current solution should be re-designed.
I've had a certain feeling these last couple of days that dependency-injection should really be called "I can't make up my mind"-pattern. I know this might sound silly, but really it's about the reasoning behind why I should use Dependency Injection (DI). Often it is said that I should use DI, to achieve a higher level of loose-coupling, and I get that part. But really... how often do I change my database, once my choice has fallen on MS SQL or MySQL .. Very rarely right?
Does anyone have some very compelling reasons why DI is the way to go?
Two words, unit testing.
One of the most compelling reasons for DI is to allow easier unit testing without having to hit a database and worry about setting up 'test' data.
DI is very useful for decoupling your system. If all you're using it for is to decouple the database implementation from the rest of your application, then either your application is pretty simple or you need to do a lot more analysis on the problem domain and discover what components within your problem domain are the most likely to change and the components within your system that have a large amount of coupling.
DI is most useful when you're aiming for code reuse, versatility and robustness to changes in your problem domain.
How relevant it is to your project depends upon the expected lifespan of your code. Depending on the type of work you're doing zero reuse from one project to the next for the majority of code you're writing might actually be quite acceptable.
An example for use the use of DI is in creating an application that can be deployed for several clients using DI to inject customisations for the client, which could also be described as the GOF Strategy pattern. Many of the GOF patterns can be facilitated with the use of a DI framework.
DI is more relevant to Enterprise application development in which you have a large amount of code, complicated business requirements and an expectation (or hope) that the system will be maintained for many years or decades.
Even if you don't change the structure of your program during development phases you will find out you need to access several subsystems from different parts of your program. With DI each of your classes just needs to ask for services and you're free of having to provide all the wiring manually.
This really helps me on concentrating on the interaction of things in the software design and not on "who needs to carry what around because someone else needs it later".
Additionally it also just saves a LOT of work writing boilerplate code. Do I need a singleton? I just configure a class to be one. Can I test with such a "singleton"? Yes, I still can (since I just CONFIGURED it to exist only once, but the test can instantiate an alternative implementation).
But, by the way before I was using DI I didn't really understand its worth, but trying it was a real eye-opener to me: My designs are a lot more object-oriented as they have been before.
By the way, with the current application I DON'T unit-test (bad, bad me) but I STILL couldn't live with DI anymore. It is so much easier moving things around and keeping classes small and simple.
While I semi-agree with you with the DB example, one of the large things that I found helpful to use DI is to help me test the layer I build on top of the database.
Here's an example...
You have your database.
You have your code that accesses the database and returns objects
You have business domain objects that take the previous item's objects and do some logic with them.
If you merge the data access with your business domain logic, your domain objects can become difficult to test. DI allows you to inject your own data access objects into your domain so that you don't depend on the database for testing or possibly demonstrations (ran a demo where some data was pulled in from xml instead of a database).
Abstracting 3rd party components and frameworks like this would also help you.
Aside from the testing example, there's a few places where DI can be used through a Design by Contract approach. You may find it appropriate to create a processing engine of sorts that calls methods of the objects you're injecting into it. While it may not truly "process it" it runs the methods that have different implementation in each object you provide.
I saw an example of this where the every business domain object had a "Save" function that the was called after it was injected into the processor. The processor modified the component with configuration information and Save handled the object's primary state. In essence, DI supplemented the polymorphic method implementation of the objects that conformed to the Interface.
Dependency Injection gives you the ability to test specific units of code in isolation.
Say I have a class Foo for example that takes an instance of a class Bar in its constructor. One of the methods on Foo might check that a Property value of Bar is one which allows some other processing of Bar to take place.
public class Foo
{
private Bar _bar;
public Foo(Bar bar)
{
_bar = bar;
}
public bool IsPropertyOfBarValid()
{
return _bar.SomeProperty == PropertyEnum.ValidProperty;
}
}
Now let's say that Bar is instantiated and it's Properties are set to data from some datasource in it's constructor. How might I go about testing the IsPropertyOfBarValid() method of Foo (ignoring the fact that this is an incredibly simple example)? Well, Foo is dependent on the instance of Bar passed in to the constructor, which in turn is dependent on the data from the datasource that it's properties are set to. What we would like to do is have some way of isolating Foo from the resources it depends upon so that we can test it in isolation
This is where Dependency Injection comes in. What we want is to have some way of faking an instance of Bar passed to Foo such that we can control the properties set on this fake Bar and achieve what we set out to do, test that the implementation of IsPropertyOfBarValid() does what we expect it to do, i.e. return true when Bar.SomeProperty == PropertyEnum.ValidProperty and false for any other value.
There are two types of fake object, Mocks and Stubs. Stubs provide input for the application under test so that the test can be performed on something else. Mocks on the other hand provide input to the test to decide on pass\fail.
Martin Fowler has a great article on the difference between Mocks and Stubs
I think that DI is worth using when you have many services/components whose implementations must be selected at runtime based on external configuration. (Note that such configuration can take the form of an XML file or a combination of code annotations and separate classes; choose what is more convenient.)
Otherwise, I would simply use a ServiceLocator, which is much "lighter" and easier to understand than a whole DI framework.
For unit testing, I prefer to use a mocking API that can mock objects on demand, instead of requiring them to be "injected" into the tested unit from a test. For Java, one such library is my own, JMockit.
Aside from loose coupling, testing of any type is achieved with much greater ease thanks to DI. You can put replace an existing dependency of a class under test with a mock, a dummy or even another version. If a class is created with its dependencies directly instantiated it can often be difficult or even impossible to "stub" them out if required.
I just understood tonight.
For me, dependancy injection is a method for instantiate objects which require a lot of parameters to work in a specific context.
When should you use dependancy injection?
You can use dependancy injection if you instanciate in a static way an object. For example, if you use a class which can convert objects into XML file or JSON file and if you need only the XML file. You will have to instanciate the object and configure a lot of thing if you don't use dependancy injection.
When should you not use depandancy injection?
If an object is instanciated with request parameters (after a submission form), you should not use depandancy injection because the object is not instanciated in a static way.
When do you encourage programming against an interface and not directly to a concrete class?
A guideline that I follow is to create abstractions whenever code requires to cross a logical/physical boundary, most especially when infrastructure-related concerns are involved.
Another checkpoint would be if a dependency will likely change in the future, due to possible additional concerns code (such as caching, transactional awareness, invoking a webservice instead of in-process execution) or if such dependencies have direct references to infrastructure integration points.
If code depends on something that does not require control to cross a logical/physical boundary, I more or less don't create abstractions to interact with those.
Am I missing anything?
Also, use interfaces when
Multiple objects will need to be acted upon in a particular fashion, but are not fundamentally related. Perhaps many of your business objects access a particular utility object, and when they do they need to give a reference of themselves to that utility object so the utility object can call a particular method. Have that method in an interface and pass that interface to that utility object.
Passing around interfaces as parameters can be very helpful in unit testing. Even if you have just one type of object that sports a particular interface, and hence don't really need a defined interface, you might define/implement an interface solely to "fake" that object in unit tests.
related to the first 2 bullets, check out the Observer pattern and the Dependency Injection. I'm not saying to implement these patterns, but they illustrate types of places where interfaces are really helpful.
Another twist on this is for implementing a couple of the SOLID Principals, Open Closed principal and the Interface Segregation principle. Like the previous bullet, don't get stressed about strictly implementing these principals everywhere (right away at least), but use these concepts to help move your thinking away from just what objects go where to thinking more about contracts and dependency
In the end, let's not make it too complicated: we're in a strongly typed world in .NET. If you need to call a method or set a property but the object you're passing/using could be fundamentally different, use an interface.
I would add that if your code is not going to be referenced by another library (for a while at least), then the decision of whether to use an interface in a particular situation is one that you can responsibly put off. The "extract interface" refactoring is easy to do these days. In my current project, I've got an object being passed around that I'm thinking maybe I should switch to an interface; I'm not stressing about it.
Interfaces abstraction are convenient when doing unit test. It helps for mocking test objects. It very useful in TDD for developing without actually using data from your database.
If you don't need any features of the class that aren't found in the Interface...then why not always prefer the Interface implementation?
It will make your code easier to modify in the future and easier to test (mocking).
you have the right idea, already. i would only add a couple of notes to this...
first, abstraction does not mean 'interface'. for example, a "connection string" is an abstraction, even though it's just a string... it's not about the 'type' of the thing in question, it's about the intention of use for that thing.
and secondly, if you are doing test automation of any kind, look for the pain and friction that are exposed by writing the tests. if you find yourself having to set up too many external conditions for a test, it's a sign that you need a better abstraction between the thing your testing and the things it interacts with.
I think you've said it pretty well. Much of this will be a stylistic thing. There are open source projects I've looked at where everything has an interface and an implementation, and it's kind of frustrating, but it might make iterative development a little easier, since any objects implementation can break but dummies will still work. But honestly, I can dummy any class that doesn't overuse the final keyword by inheritance.
I would add to your list this: anything which can be thought of as a black box should be abstracted. This includes some of the things you've mentioned, but it also includes hairy algorithms, which are likely to have multiple useful implementations with different advantages for different situation.
Additionally, interfaces come in handy very often with composite objects. That's the only way something like java's swing library gets anything done, but it can also be useful for more mundane objects. (I personally like having an interface like ValidityChecker with ways to and-compose or or-compose subordinate ValidityCheckers.)
Most of the useful things that come with the Interface passing have been already said. However I would add:
implementing an interface to an object, or later multiple objects, FORCES all the implementers to follow an IDENTICAL pattern to implement contract with the object. This can be useful in case you have not so OOP-experienced-programmers actually writing the implementation code.
in some languages you can add attributes on the interface itself, which can be different from the actual object implementation attribute as sense and intent
Inversion of Control (IoC) can be quite confusing when it is first encountered.
What is it?
Which problem does it solve?
When is it appropriate to use and when not?
The Inversion-of-Control (IoC) pattern, is about providing any kind of callback, which "implements" and/or controls reaction, instead of acting ourselves directly (in other words, inversion and/or redirecting control to the external handler/controller).
The Dependency-Injection (DI) pattern is a more specific version of IoC pattern, and is all about removing dependencies from your code.
Every DI implementation can be considered IoC, but one should not call it IoC, because implementing Dependency-Injection is harder than callback (Don't lower your product's worth by using the general term "IoC" instead).
For DI example, say your application has a text-editor component, and you want to provide spell checking. Your standard code would look something like this:
public class TextEditor {
private SpellChecker checker;
public TextEditor() {
this.checker = new SpellChecker();
}
}
What we've done here creates a dependency between the TextEditor and the SpellChecker.
In an IoC scenario we would instead do something like this:
public class TextEditor {
private IocSpellChecker checker;
public TextEditor(IocSpellChecker checker) {
this.checker = checker;
}
}
In the first code example we are instantiating SpellChecker (this.checker = new SpellChecker();), which means the TextEditor class directly depends on the SpellChecker class.
In the second code example we are creating an abstraction by having the SpellChecker dependency class in TextEditor's constructor signature (not initializing dependency in class). This allows us to call the dependency then pass it to the TextEditor class like so:
SpellChecker sc = new SpellChecker(); // dependency
TextEditor textEditor = new TextEditor(sc);
Now the client creating the TextEditor class has control over which SpellChecker implementation to use because we're injecting the dependency into the TextEditor signature.
Note that just like IoC being the base of many other patterns, above sample is only one of many Dependency-Injection kinds, for example:
Constructor Injection.
Where an instance of IocSpellChecker would be passed to constructor, either automatically or similar to above manually.
Setter Injection.
Where an instance of IocSpellChecker would be passed through setter-method or public property.
Service-lookup and/or Service-locator
Where TextEditor would ask a known provider for a globally-used-instance (service) of IocSpellChecker type (and that maybe without storing said instance, and instead, asking the provider again and again).
Inversion of Control is what you get when your program callbacks, e.g. like a gui program.
For example, in an old school menu, you might have:
print "enter your name"
read name
print "enter your address"
read address
etc...
store in database
thereby controlling the flow of user interaction.
In a GUI program or somesuch, instead we say:
when the user types in field a, store it in NAME
when the user types in field b, store it in ADDRESS
when the user clicks the save button, call StoreInDatabase
So now control is inverted... instead of the computer accepting user input in a fixed order, the user controls the order in which the data is entered, and when the data is saved in the database.
Basically, anything with an event loop, callbacks, or execute triggers falls into this category.
What is Inversion of Control?
If you follow these simple two steps, you have done inversion of control:
Separate what-to-do part from when-to-do part.
Ensure that when part knows as little as possible about what part; and vice versa.
There are several techniques possible for each of these steps based on the technology/language you are using for your implementation.
--
The inversion part of the Inversion of Control (IoC) is the confusing thing; because inversion is the relative term. The best way to understand IoC is to forget about that word!
--
Examples
Event Handling. Event Handlers (what-to-do part) -- Raising Events (when-to-do part)
Dependency Injection. Code that constructs a dependency (what-to-do part) -- instantiating and injecting that dependency for the clients when needed, which is usually taken care of by the DI tools such as Dagger (when-to-do-part).
Interfaces. Component client (when-to-do part) -- Component Interface implementation (what-to-do part)
xUnit fixture. Setup and TearDown (what-to-do part) -- xUnit frameworks calls to Setup at the beginning and TearDown at the end (when-to-do part)
Template method design pattern. template method when-to-do part -- primitive subclass implementation what-to-do part
DLL container methods in COM. DllMain, DllCanUnload, etc (what-to-do part) -- COM/OS (when-to-do part)
Inversion of Controls is about separating concerns.
Without IoC: You have a laptop computer and you accidentally break the screen. And darn, you find the same model laptop screen is nowhere in the market. So you're stuck.
With IoC: You have a desktop computer and you accidentally break the screen. You find you can just grab almost any desktop monitor from the market, and it works well with your desktop.
Your desktop successfully implements IoC in this case. It accepts a variety type of monitors, while the laptop does not, it needs a specific screen to get fixed.
Inversion of Control, (or IoC), is about getting freedom (You get married, you lost freedom and you are being controlled. You divorced, you have just implemented Inversion of Control. That's what we called, "decoupled". Good computer system discourages some very close relationship.) more flexibility (The kitchen in your office only serves clean tap water, that is your only choice when you want to drink. Your boss implemented Inversion of Control by setting up a new coffee machine. Now you get the flexibility of choosing either tap water or coffee.) and less dependency (Your partner has a job, you don't have a job, you financially depend on your partner, so you are controlled. You find a job, you have implemented Inversion of Control. Good computer system encourages in-dependency.)
When you use a desktop computer, you have slaved (or say, controlled). You have to sit before a screen and look at it. Using the keyboard to type and using the mouse to navigate. And a badly written software can slave you even more. If you replace your desktop with a laptop, then you somewhat inverted control. You can easily take it and move around. So now you can control where you are with your computer, instead of your computer controlling it.
By implementing Inversion of Control, a software/object consumer gets more controls/options over the software/objects, instead of being controlled or having fewer options.
With the above ideas in mind. We still miss a key part of IoC. In the scenario of IoC, the software/object consumer is a sophisticated framework. That means the code you created is not called by yourself. Now let's explain why this way works better for a web application.
Suppose your code is a group of workers. They need to build a car. These workers need a place and tools (a software framework) to build the car. A traditional software framework will be like a garage with many tools. So the workers need to make a plan themselves and use the tools to build the car. Building a car is not an easy business, it will be really hard for the workers to plan and cooperate properly. A modern software framework will be like a modern car factory with all the facilities and managers in place. The workers do not have to make any plan, the managers (part of the framework, they are the smartest people and made the most sophisticated plan) will help coordinate so that the workers know when to do their job (framework calls your code). The workers just need to be flexible enough to use any tools the managers give to them (by using Dependency Injection).
Although the workers give the control of managing the project on the top level to the managers (the framework). But it is good to have some professionals help out. This is the concept of IoC truly come from.
Modern Web applications with an MVC architecture depends on the framework to do URL Routing and put Controllers in place for the framework to call.
Dependency Injection and Inversion of Control are related. Dependency Injection is at the micro level and Inversion of Control is at the macro level. You have to eat every bite (implement DI) in order to finish a meal (implement IoC).
Before using Inversion of Control you should be well aware of the fact that it has its pros and cons and you should know why you use it if you do so.
Pros:
Your code gets decoupled so you can easily exchange implementations of an interface with alternative implementations
It is a strong motivator for coding against interfaces instead of implementations
It's very easy to write unit tests for your code because it depends on nothing else than the objects it accepts in its constructor/setters and you can easily initialize them with the right objects in isolation.
Cons:
IoC not only inverts the control flow in your program, it also clouds it considerably. This means you can no longer just read your code and jump from one place to another because the connections that would normally be in your code are not in the code anymore. Instead it is in XML configuration files or annotations and in the code of your IoC container that interprets these metadata.
There arises a new class of bugs where you get your XML config or your annotations wrong and you can spend a lot of time finding out why your IoC container injects a null reference into one of your objects under certain conditions.
Personally I see the strong points of IoC and I really like them but I tend to avoid IoC whenever possible because it turns your software into a collection of classes that no longer constitute a "real" program but just something that needs to be put together by XML configuration or annotation metadata and would fall (and falls) apart without it.
Wikipedia Article. To me, inversion of control is turning your sequentially written code and turning it into an delegation structure. Instead of your program explicitly controlling everything, your program sets up a class or library with certain functions to be called when certain things happen.
It solves code duplication. For example, in the old days you would manually write your own event loop, polling the system libraries for new events. Nowadays, most modern APIs you simply tell the system libraries what events you're interested in, and it will let you know when they happen.
Inversion of control is a practical way to reduce code duplication, and if you find yourself copying an entire method and only changing a small piece of the code, you can consider tackling it with inversion of control. Inversion of control is made easy in many languages through the concept of delegates, interfaces, or even raw function pointers.
It is not appropriate to use in all cases, because the flow of a program can be harder to follow when written this way. It's a useful way to design methods when writing a library that will be reused, but it should be used sparingly in the core of your own program unless it really solves a code duplication problem.
Suppose you are an object. And you go to a restaurant:
Without IoC: you ask for "apple", and you are always served apple when you ask more.
With IoC: You can ask for "fruit". You can get different fruits each time you get served. for example, apple, orange, or water melon.
So, obviously, IoC is preferred when you like the varieties.
Answering only the first part.
What is it?
Inversion of Control (IoC) means to create instances of dependencies first and latter instance of a class (optionally injecting them through constructor), instead of creating an instance of the class first and then the class instance creating instances of dependencies.
Thus, inversion of control inverts the flow of control of the program. Instead of the callee controlling the flow of control (while creating dependencies), the caller controls the flow of control of the program.
But I think you have to be very careful with it. If you will overuse this pattern, you will make very complicated design and even more complicated code.
Like in this example with TextEditor: if you have only one SpellChecker maybe it is not really necessary to use IoC ? Unless you need to write unit tests or something ...
Anyway: be reasonable. Design pattern are good practices but not Bible to be preached. Do not stick it everywhere.
IoC / DI to me is pushing out dependencies to the calling objects. Super simple.
The non-techy answer is being able to swap out an engine in a car right before you turn it on. If everything hooks up right (the interface), you are good.
Inversion of control is a pattern used for decoupling components and layers in the system. The pattern is implemented through injecting dependencies into a component when it is constructed. These dependences are usually provided as interfaces for further decoupling and to support testability. IoC / DI containers such as Castle Windsor, Unity are tools (libraries) which can be used for providing IoC. These tools provide extended features above and beyond simple dependency management, including lifetime, AOP / Interception, policy, etc.
a. Alleviates a component from being responsible for managing it's dependencies.
b. Provides the ability to swap dependency implementations in different environments.
c. Allows a component be tested through mocking of dependencies.
d. Provides a mechanism for sharing resources throughout an application.
a. Critical when doing test-driven development. Without IoC it can be difficult to test, because the components under test are highly coupled to the rest of the system.
b. Critical when developing modular systems. A modular system is a system whose components can be replaced without requiring recompilation.
c. Critical if there are many cross-cutting concerns which need to addressed, partilarly in an enterprise application.
Let's say that we have a meeting in a hotel.
We have invited many people, so we have left out many jugs of water and many plastic cups.
When somebody wants to drink, he/she fills a cup, drinks the water and throws the cup on the floor.
After an hour or so we have a floor covered with plastic cups and water.
Let's try that after inverting the control:
Imagine the same meeting in the same place, but instead of plastic cups we now have a waiter with just one glass cup (Singleton)
When somebody wants to drink, the waiter gets one for them. They drink it and return it to the waiter.
Leaving aside the question of the hygiene, the use of a waiter (process control) is much more effective and economic.
And this is exactly what Spring (another IoC container, for example: Guice) does. Instead of letting the application create what it needs using the new keyword (i.e. taking a plastic cup), Spring IoC offers the application the same cup/ instance (singleton) of the needed object (glass of water).
Think of yourself as an organizer of such a meeting:
Example:-
public class MeetingMember {
private GlassOfWater glassOfWater;
...
public void setGlassOfWater(GlassOfWater glassOfWater){
this.glassOfWater = glassOfWater;
}
//your glassOfWater object initialized and ready to use...
//spring IoC called setGlassOfWater method itself in order to
//offer to meetingMember glassOfWater instance
}
Useful links:-
http://adfjsf.blogspot.in/2008/05/inversion-of-control.html
http://martinfowler.com/articles/injection.html
http://www.shawn-barrett.com/blog/post/Tip-of-the-day-e28093-Inversion-Of-Control.aspx
I shall write down my simple understanding of this two terms:
For quick understanding just read examples*
Dependency Injection(DI):
Dependency injection generally means passing an object on which method depends, as a parameter to a method, rather than having the method create the dependent object. What it means in practice is that the method does not depends directly on a particular implementation; any implementation that meets the requirements can be passed as a parameter.
With this objects tell thier dependencies.
And spring makes it available. This leads to loosely coupled application development.
Quick Example:EMPLOYEE OBJECT WHEN CREATED,
IT WILL AUTOMATICALLY CREATE ADDRESS OBJECT
(if address is defines as dependency by Employee object)
Inversion of Control(IoC) Container:
This is common characteristic of frameworks,
IOC manages java objects – from instantiation to destruction through its BeanFactory. -Java components that are instantiated by the IoC container are called beans, and the IoC container manages a bean's scope, lifecycle events, and any AOP features for which it has been configured and coded.
QUICK EXAMPLE:Inversion of Control is about getting freedom, more flexibility, and less dependency. When you are using a desktop computer, you are slaved (or say, controlled). You have to sit before a screen and look at it. Using keyboard to type and using mouse to navigate. And a bad written software can slave you even more. If you replaced your desktop with a laptop, then you somewhat inverted control. You can easily take it and move around. So now you can control where you are with your computer, instead of computer controlling it.
By implementing Inversion of Control, a software/object consumer get more controls/options over the software/objects, instead of being controlled or having less options.
Inversion of control as a design guideline serves the following purposes:
There is a decoupling of the execution of a certain task from implementation.
Every module can focus on what it is designed for.
Modules make no assumptions about what other systems do but rely on their contracts.
Replacing modules has no side effect on other modules I will keep things abstract here, You can visit following links for detail understanding of the topic.
A good read with example
Detailed explanation
I found a very clear example here which explains how the 'control is inverted'.
Classic code (without Dependency injection)
Here is how a code not using DI will roughly work:
Application needs Foo (e.g. a controller), so:
Application creates Foo
Application calls Foo
Foo needs Bar (e.g. a service), so:
Foo creates Bar
Foo calls Bar
Bar needs Bim (a service, a repository, …), so:
Bar creates Bim
Bar does something
Using dependency injection
Here is how a code using DI will roughly work:
Application needs Foo, which needs Bar, which needs Bim, so:
Application creates Bim
Application creates Bar and gives it Bim
Application creates Foo and gives it Bar
Application calls Foo
Foo calls Bar
Bar does something
The control of the dependencies is inverted from one being called to the one calling.
What problems does it solve?
Dependency injection makes it easy to swap with the different implementation of the injected classes. While unit testing you can inject a dummy implementation, which makes the testing a lot easier.
Ex: Suppose your application stores the user uploaded file in the Google Drive, with DI your controller code may look like this:
class SomeController
{
private $storage;
function __construct(StorageServiceInterface $storage)
{
$this->storage = $storage;
}
public function myFunction ()
{
return $this->storage->getFile($fileName);
}
}
class GoogleDriveService implements StorageServiceInterface
{
public function authenticate($user) {}
public function putFile($file) {}
public function getFile($file) {}
}
When your requirements change say, instead of GoogleDrive you are asked to use the Dropbox. You only need to write a dropbox implementation for the StorageServiceInterface. You don't have make any changes in the controller as long as Dropbox implementation adheres to the StorageServiceInterface.
While testing you can create the mock for the StorageServiceInterface with the dummy implementation where all the methods return null(or any predefined value as per your testing requirement).
Instead if you had the controller class to construct the storage object with the new keyword like this:
class SomeController
{
private $storage;
function __construct()
{
$this->storage = new GoogleDriveService();
}
public function myFunction ()
{
return $this->storage->getFile($fileName);
}
}
When you want to change with the Dropbox implementation you have to replace all the lines where new GoogleDriveService object is constructed and use the DropboxService. Besides when testing the SomeController class the constructor always expects the GoogleDriveService class and the actual methods of this class are triggered.
When is it appropriate and when not?
In my opinion you use DI when you think there are (or there can be) alternative implementations of a class.
I agree with NilObject, but I'd like to add to this:
if you find yourself copying an entire method and only changing a small piece of the code, you can consider tackling it with inversion of control
If you find yourself copying and pasting code around, you're almost always doing something wrong. Codified as the design principle Once and Only Once.
For example, task#1 is to create object.
Without IOC concept, task#1 is supposed to be done by Programmer.But With IOC concept, task#1 would be done by container.
In short Control gets inverted from Programmer to container. So, it is called as inversion of control.
I found one good example here.
It seems that the most confusing thing about "IoC" the acronym and the name for which it stands is that it's too glamorous of a name - almost a noise name.
Do we really need a name by which to describe the difference between procedural and event driven programming? OK, if we need to, but do we need to pick a brand new "bigger than life" name that confuses more than it solves?
Inversion of control is when you go to the grocery store and your wife gives you the list of products to buy.
In programming terms, she passed a callback function getProductList() to the function you are executing - doShopping().
It allows user of the function to define some parts of it, making it more flexible.
I understand that the answer has already been given here. But I still think, some basics about the inversion of control have to be discussed here in length for future readers.
Inversion of Control (IoC) has been built on a very simple principle called Hollywood Principle. And it says that,
Don't call us, we'll call you
What it means is that don't go to the Hollywood to fulfill your dream rather if you are worthy then Hollywood will find you and make your dream comes true. Pretty much inverted, huh?
Now when we discuss about the principle of IoC, we use to forget about the Hollywood. For IoC, there has to be three element, a Hollywood, you and a task like to fulfill your dream.
In our programming world, Hollywood represent a generic framework (may be written by you or someone else), you represent the user code you wrote and the task represent the thing you want to accomplish with your code. Now you don't ever go to trigger your task by yourself, not in IoC! Rather you have designed everything in such that your framework will trigger your task for you. Thus you have built a reusable framework which can make someone a hero or another one a villain. But that framework is always in charge, it knows when to pick someone and that someone only knows what it wants to be.
A real life example would be given here. Suppose, you want to develop a web application. So, you create a framework which will handle all the common things a web application should handle like handling http request, creating application menu, serving pages, managing cookies, triggering events etc.
And then you leave some hooks in your framework where you can put further codes to generate custom menu, pages, cookies or logging some user events etc. On every browser request, your framework will run and executes your custom codes if hooked then serve it back to the browser.
So, the idea is pretty much simple. Rather than creating a user application which will control everything, first you create a reusable framework which will control everything then write your custom codes and hook it to the framework to execute those in time.
Laravel and EJB are examples of such a frameworks.
Reference:
https://martinfowler.com/bliki/InversionOfControl.html
https://en.wikipedia.org/wiki/Inversion_of_control
Inversion of Control is a generic principle, while Dependency Injection realises this principle as a design pattern for object graph construction (i.e. configuration controls how the objects are referencing each other, rather than the object itself controlling how to get the reference to another object).
Looking at Inversion of Control as a design pattern, we need to look at what we are inverting. Dependency Injection inverts control of constructing a graph of objects. If told in layman's term, inversion of control implies change in flow of control in the program. Eg. In traditional standalone app, we have main method, from where the control gets passed to other third party libraries(in case, we have used third party library's function), but through inversion of control control gets transferred from third party library code to our code, as we are taking the service of third party library. But there are other aspects that need to be inverted within a program - e.g. invocation of methods and threads to execute the code.
For those interested in more depth on Inversion of Control a paper has been published outlining a more complete picture of Inversion of Control as a design pattern (OfficeFloor: using office patterns to improve software design http://doi.acm.org/10.1145/2739011.2739013 with a free copy available to download from http://www.officefloor.net/about.html).
What is identified is the following relationship:
Inversion of Control (for methods) = Dependency (state) Injection + Continuation Injection + Thread Injection
Summary of above relationship for Inversion of Control available - http://dzone.com/articles/inversion-of-coupling-control
IoC is about inverting the relationship between your code and third-party code (library/framework):
In normal s/w development, you write the main() method and call "library" methods. You are in control :)
In IoC the "framework" controls main() and calls your methods. The Framework is in control :(
DI (Dependency Injection) is about how the control flows in the application. Traditional desktop application had control flow from your application(main() method) to other library method calls, but with DI control flow is inverted that's framework takes care of starting your app, initializing it and invoking your methods whenever required.
In the end you always win :)
I like this explanation: http://joelabrahamsson.com/inversion-of-control-an-introduction-with-examples-in-net/
It start simple and shows code examples as well.
The consumer, X, needs the consumed class, Y, to accomplish something. That’s all good and natural, but does X really need to know that it uses Y?
Isn’t it enough that X knows that it uses something that has the behavior, the methods, properties etc, of Y without knowing who actually implements the behavior?
By extracting an abstract definition of the behavior used by X in Y, illustrated as I below, and letting the consumer X use an instance of that instead of Y it can continue to do what it does without having to know the specifics about Y.
In the illustration above Y implements I and X uses an instance of I. While it’s quite possible that X still uses Y what’s interesting is that X doesn’t know that. It just knows that it uses something that implements I.
Read article for further info and description of benefits such as:
X is not dependent on Y anymore
More flexible, implementation can be decided in runtime
Isolation of code unit, easier testing
...
A very simple written explanation can be found here
http://binstock.blogspot.in/2008/01/excellent-explanation-of-dependency.html
It says -
"Any nontrivial application is made up of two or more classes that
collaborate with each other to perform some business logic.
Traditionally, each object is responsible for obtaining its own
references to the objects it collaborates with (its dependencies).
When applying DI, the objects are given their dependencies at creation
time by some external entity that coordinates each object in the
system. In other words, dependencies are injected into objects."
Programming speaking
IoC in easy terms: It's the use of Interface as a way of specific something (such a field or a parameter) as a wildcard that can be used by some classes. It allows the re-usability of the code.
For example, let's say that we have two classes : Dog and Cat. Both shares the same qualities/states: age, size, weight. So instead of creating a class of service called DogService and CatService, I can create a single one called AnimalService that allows to use Dog and Cat only if they use the interface IAnimal.
However, pragmatically speaking, it has some backwards.
a) Most of the developers don't know how to use it. For example, I can create a class called Customer and I can create automatically (using the tools of the IDE) an interface called ICustomer. So, it's not rare to find a folder filled with classes and interfaces, no matter if the interfaces will be reused or not. It's called BLOATED. Some people could argue that "may be in the future we could use it". :-|
b) It has some limitings. For example, let's talk about the case of Dog and Cat and I want to add a new service (functionality) only for dogs. Let's say that I want to calculate the number of days that I need to train a dog (trainDays()), for cat it's useless, cats can't be trained (I'm joking).
b.1) If I add trainDays() to the Service AnimalService then it also works with cats and it's not valid at all.
b.2) I can add a condition in trainDays() where it evaluates which class is used. But it will break completely the IoC.
b.3) I can create a new class of service called DogService just for the new functionality. But, it will increase the maintainability of the code because we will have two classes of service (with similar functionality) for Dog and it's bad.
Inversion of control is about transferring control from library to the client. It makes more sense when we talk about a client that injects (passes) a function value (lambda expression) into a higher order function (library function) that controls (changes) the behavior of the library function.
So, a simple implementation (with huge implications) of this pattern is a higher order library function (which accepts another function as an argument). The library function transfers control over its behavior by giving the client the ability to supply the "control" function as an argument.
For example, library functions like "map", "flatMap" are IoC implementations.
Of course, a limited IoC version is, for example, a boolean function parameter. A client may control the library function by switching the boolean argument.
A client or framework that injects library dependencies (which carry behavior) into libraries may also be considered IoC
I've read a lot of answers for this but if someone is still confused and needs a plus ultra "laymans term" to explain IoC here is my take:
Imagine a parent and child talking to each other.
Without IoC:
*Parent: You can only speak when I ask you questions and you can only act when I give you permission.
Parent: This means, you can't ask me if you can eat, play, go to the bathroom or even sleep if I don't ask you.
Parent: Do you want to eat?
Child: No.
Parent: Okay, I'll be back. Wait for me.
Child: (Wants to play but since there's no question from the parent, the child can't do anything).
After 1 hour...
Parent: I'm back. Do you want to play?
Child: Yes.
Parent: Permission granted.
Child: (finally is able to play).
This simple scenario explains the control is centered to the parent. The child's freedom is restricted and highly depends on the parent's question. The child can ONLY speak when asked to speak, and can ONLY act when granted permission.
With IoC:
The child has now the ability to ask questions and the parent can respond with answers and permissions. Simply means the control is inverted!
The child is now free to ask questions anytime and though there is still dependency with the parent regarding permissions, he is not dependent in the means of speaking/asking questions.
In a technological way of explaining, this is very similar to console/shell/cmd vs GUI interaction. (Which is answer of Mark Harrison above no.2 top answer).
In console, you are dependent on the what is being asked/displayed to you and you can't jump to other menus and features without answering it's question first; following a strict sequential flow. (programmatically this is like a method/function loop).
However with GUI, the menus and features are laid out and the user can select whatever it needs thus having more control and being less restricted. (programmatically, menus have callback when selected and an action takes place).
Since already there are many answers for the question but none of them shows the breakdown of Inversion Control term I see an opportunity to give a more concise and useful answer.
Inversion of Control is a pattern that implements the Dependency Inversion Principle (DIP). DIP states the following: 1. High-level modules should not depend on low-level modules. Both should depend on abstractions (e.g. interfaces). 2. Abstractions should not depend on details. Details (concrete implementations) should depend on abstractions.
There are three types of Inversion of Control:
Interface Inversion
Providers shouldn’t define an interface. Instead, the consumer should define the interface and providers must implement it. Interface Inversion allows eliminating the necessity to modify the consumer each time when a new provider added.
Flow Inversion
Changes control of the flow. For example, you have a console application where you asked to enter many parameters and after each entered parameter you are forced to press Enter. You can apply Flow Inversion here and implement a desktop application where the user can choose the sequence of parameters’ entering, the user can edit parameters, and at the final step, the user needs to press Enter only once.
Creation Inversion
It can be implemented by the following patterns: Factory Pattern, Service Locator, and Dependency Injection. Creation Inversion helps to eliminate dependencies between types moving the process of dependency objects creation outside of the type that uses these dependency objects. Why dependencies are bad? Here are a couple of examples: direct creation of a new object in your code makes testing harder; it is impossible to change references in assemblies without recompilation (OCP principle violation); you can’t easily replace a desktop-UI by a web-UI.
Creating an object within class is called tight coupling, Spring removes this dependency by following a design pattern(DI/IOC). In which object of class in passed in constructor rather than creating in class. More over we give super class reference variable in constructor to define more general structure.
Using IoC you are not new'ing up your objects. Your IoC container will do that and manage the lifetime of them.
It solves the problem of having to manually change every instantiation of one type of object to another.
It is appropriate when you have functionality that may change in the future or that may be different depending on the environment or configuration used in.