I've been using the Intellij Golang plugin recently (it's great) but I've been running into an issue with the File Watchers I set up. My working directory is set to my $GOPATH directory and I would like to be able to run golint and goimports after I save a file I'm working on. The issue I have is if I use git to clone a repo the next time I open Intellij it runs both golint and goimports on all the newly imported files which can take a long time for large projects. Is there a way to set up File Watcher so it only watches a file that is currently open? I added a screenshot of my current settings below:
Open Watcher setting -> Scope , change it to Open Files
If you wanna more control over the plugin, you can have a look at the official doc
Instead of file watcher you can get External tools configured to achieve almost the same functionality. The only difference is that this won't run on save but rather you'll have to trigger this manually. Or you could configure a macro to run them on save (but I don't have experience with macros + external tools so I'm not if this will work).
Related
Recently my client switched from Eclipse to Intellij. In both IDEs I was editing SCSS files externally and running "compass watch" in terminal. This worked great in Eclipse. immediately after compiling SCSS file I was able to simply refresh browser and see the changes.
In Intellij it takes up to 30 seconds to see the changes, or if I enable "synchronize files on frame activation" I have to switch to browser first, then back to Intellij, and then back again to browser in order to force refresh. Third option is to manually sync "css" folder, which is not convenient. I had a same issue when I was editing and compiling SCSS files in Intellij.
How can I force Intellij to detect CSS file change faster?
I've found the solution.
Open "Settings / File Watchers" and go to SCSS. Make sure that field "Output paths to refresh" has the same value for the output as "Arguments" field.
For example, this is my setup:
Arguments:
--no-cache --update $FileName$:$FileParentDir$\css\$FileNameWithoutExtension$.css
Output paths to refresh:
$FileParentDir$\css\$FileNameWithoutExtension$.css
Ahoi
I have an project with grunt, and whenever I save a file it runs the csscomb script in the grunt:watch task. My old "IDE" Sublime reloaded the changes automatically, phpStorm doesn't do that. I always have to manually synch the file.
The whole problem is that I write code, save in between and continue programming, and then the popup about the file system changes appears.
LG
Do you run grunt:watch outside of webStorm, or using Grunt console? In the latter case, the file system should be synchronized when task is completed. But if the task is run externally, outside of webstorm, you have to synchronize files manually
I know this is old stuff, but I had the same problem with WebStorm - i.e grunt running externally on a network server.
I just unchecked "use safe-write ..." in Settings > Appearance & Behaviour > System Settings and now my WS writes saves directly to the file triggering watch grunt tasks.
Try Preferences -> Appearance & Behavior -> System Settings -> Synchronize files on frame activation. PHPStorm will automatically reload file system changes once you switch to its window.
I have many different versions of my app. Each one is a separate IntelliJ project. Every time I open a new one, the list of configurations starts blank:
The annoying thing about this is I deploy to 1 VM and I have to copy and paste the debug configurations each time I want to test a different version. IntelliJ makes this dialog modal per IntelliJ Instance, so I can't copy and paste the fields between Project Instances.
I end up taking a screenshot of one configuration and copying the fields by hand into the other project. It's a pretty primitive solution. Is there a more convenient way to get a run configuration from one project to another?
I'm using IntelliJ 13 on Windows 7.
Can I share settings for IntelliJ Idea across different projects? may have the answer to this, but the question is different. It's about window layout. Therefore I don't consider it a duplicate.
The best way to do this is to click the "share" checkmark next to Name field when you edit/create the configuration. You can get to this Dialog with Run > Edit Configurations.
The share check-mark pulls the setting out of your workspace.xml and instead puts it in the directory .idea\runConfigurations. This is designed so you can share the setting with others.
You could copy this file and put it in the same location in all your idea projects.
However, in the future, you might want to consider using source control branches for app versions rather than separate projects. IntelliJ handles these very well.
UPDATE (June 2021):
IntelliJ now puts this in the .run folder as its own file, no longer in .idea/runConfigurations.
Run configurations are stored in .idea/workspace.xml by default. First alternative is to share this file but it is not feasible because you also share a lot of unnecessary configurations.
As already said, the first step is to check "share" option to separate run configurations from workspace.xml.
After that, I recommend adding runConfigurations to source control. But the main problem is, probably you have already marked .idea folder as ignored.
You can unignore the folder by configuring your source control system. For example, if you are using git, you can change .gitignore file as follows:
.idea/*
!/.idea/runConfigurations
don't forget adding * after .idea/
As the last step, add your run configurations to source control and enjoy your shared configurations!
goto
Run > Edit Configuration > create or select existing configuration you want to use > click save and persist it on file system > click on share check mark
now copy this file from
PROJECT_ROOT_DIRECTORY/.idea/runConfigurations/ConfigurationName.xml
to your NEW_PROJECT_ROOT_DIRECTORY/.idea/runConfigurations at the same place and it is available now to your run configuration
You should copy the folder
~/your-old-project/.idea/runConfigurations
to
~/your-new-project/.idea/
That's the folder that contains the run configurations.
An update for this question with the new IntelliJ updates:
Now you can "Store as project file" which will create a folder named ".run" and export your setting to that folder. In the example below, I did it for all my test settings. This removes the requirement of editing .gitignore since files are now not outside of ./idea
This is not exactly an answer to your question but it answers a question similar to your question and one that I had, and I'm assuming others might as well.
That is, How to save unit and instrumentation test run configurations? I usually right-click on the test directory which brings up a menu with the option to Run whatever is in that directory. AndroidStudio then creates a run configuration on the fly and in the Run Configuration drop-down menu a new option will appear, "Save new configuration?" or something similar.
Clicking that option brings up the Run Configuration menu and at that point I check the Share box as many others have already mentioned. This then will prompt the version control system to ask me if I want to add this new run configuration file. If you haven't registered your version control system you can find the new files under .idea/runConfigurations.
I use automatic deploy through FTP. Everything worked well until I started to use coffeescript and its filewatcher feature which recompiles my .coffee file into .js file on every change.
Problem is that IDEA don't want to upload these compiled files like others. So I have manually press hotkey to upload compiled file after every change, which I want to see on the server.
How can I do it more convenient to use?
There is an option to upload external changes automatically.
Right now IDEA will not perform synchronization after file watcher is invoked, so you will need to do File | Synchronize, IDE will detect the changes and upload them.
Next update will have an option for the file watcher to perform synchronization after execution as the result of addressing this feature request.
this feature request concerns to a possibility to synchronize all files in output directory on every change (required by some transpilers). But, AFAIK, this is not the case for CoffeeScript compiler - synchronization should work there. Do the generated js files appear in the Project View as soon as the compilation completes, or do you have to synchronize the view manually to see changes? In the latter case something must be wrong with file watcher configuration (output path set incorrectly, for example). If files are synchronized correctly, setting 'upload external changes' option should do the thing
Well my question is pretty simple, how do I start two instances of IntelliJ (community edition).
When I have one instance started and I try to start another one, all that happens is that my started instance gets focus.
I'm developing Android applications using IntelliJ.
Any thoughts?
Press Ctrl+Alt+SChoose Appearance & Behavior, then System Settings, check radio button: Open project in new window.
You need to configure each instance to use its own folders for config/plugins/system locations by editing idea.properties file on Windows/Linux and Info.plist on Mac. You can find the details in FAQ.
Note that normally it's not necessary since you can open multiple projects in different IDEA frames within the same instance using File | Open or Open Recent.
CrazyCoder has roughly the right idea. However, setting the config file alone was not sufficient for me to run multiple instances. Here are my steps to get this going (in GNU/Linux, I am sure you can figure out equivalent in other systems):
Create a folder/directory per instance you want to run.
mkdir -p ~/idea/instance-0
Go to the installation directory (e.g. /opt/intellij) and copy the idea.properties (in bin) file over to your instance directory.
cp /opt/intellij/bin/idea.properties ~/idea/instance-0/
Copy 3 more directories: system, plugins, and config. I highly recommend doing this without the running instance
cp -r /opt/intellij/system ~/idea/instance-0/
cp -r /opt/intellij/plugins ~/idea/instance-0/
cp -r /opt/intellij/config ~/idea/instance-0/
mkdir ~/idea/instance-0/log
Open your idea.properties file and update the configurations for your directories:
#---------------------------------------------------------------------
# Uncomment this option if you want to customize path to IDE config folder. Make sure you're using forward slashes.
#---------------------------------------------------------------------
idea.config.path=${user.home}/config
#---------------------------------------------------------------------
# Uncomment this option if you want to customize path to IDE system folder. Make sure you're using forward slashes.
#---------------------------------------------------------------------
idea.system.path=${user.home}/system
#---------------------------------------------------------------------
# Uncomment this option if you want to customize path to user installed plugins folder. Make sure you're using forward slashes.
#---------------------------------------------------------------------
idea.plugins.path=${user.home}/plugins
#---------------------------------------------------------------------
# Uncomment this option if you want to customize path to IDE logs folder. Make sure you're using forward slashes.
#---------------------------------------------------------------------
idea.log.path=${user.home}/log
Now, you can start IntelliJ with the new setup:
IDEA_PROPERTIES=~/idea/instance-0/idea.properties /opt/intellij/bin/idea
Obviously, you probably want to put the command in a script file for invocation. This seems to work for me.
File->Settings->General and in section "Startup/Shutdown" check "Confirm window to open project in"
With Ultimate 2020.2, go to Appearance & Behavior > System Settings in the settings dialog and select the "Ask" option for "Open project in"
As per the directions from jetbrains you'll need go to the 'General' page of the 'Settings' dialog and chose 'Open project in a new window'. Then proceed to open a project as you normally do. IntelliJ should then startup a completely new instance.
There is an other very quick way of doing it. There is always an EAP version of the IDE and it can run at same time with the current one. For example I am using AppCode 2017.2 and 2017.3 EAP in parallel.
Go go to IntelliJ | Tools | Create Command-line Launcher...
Keep the defaults (which creates a binary named "idea"):
Now, go to your command line.
Cd to your project directory and type: idea .
This will create a .idea directory for IntelliJ configurations for that project, which it will re-use each time to start IntelliJ from that directory.
You can now go to a different project directory and type: idea .
Assuming you left the previous IntellJ IDE open, you will now have two IntellJ IDEs open, one for each project.
Notes:
1) If your project uses environment variables, then I'd recommending opening a separate terminal tab/window for each project and set that project's environment variables before running: idea .
2) Depending on what you're trying to accomplish, you may need to modify your classpath (or settings like Project GOPATH) for each IntelliJ instance.
My answer is not directly related to the question but its a solution for some cases where we think we need 2 Intellij instances.
For my issue I was thinking to launch 2 Intellij instances. But after careful thinking and searching for other options, I found an easy and quick solution and I wanna share with the community
If you are looking to compare files between different branches, and you wanna compare the difference, that can be done with git comparison. You don't need 2 different Intellij instances.
My Case:
In my case, I wanted to copy very specific code from 1 branch to another and I wanted to compare the difference between the code. The restriction was, I can't do git merge or cherry-pick because we didn't want full commit to be part of new branch. Just few necessary lines were required in the new branch.
My Solution:
Select the branch
Open the file where you wanna insert code
Right Click -> Git -> Compare with... (refer to pic)
Select the branch and you will get the difference
Append or Copy the difference
If you have new files or directories, you can create it manually and copy-paste the content
I know this answer doesn't directly relates to what has been asked, but sometimes we miss alternative solutions.
Hope this can be helpful as an alternative solution.
In addition to the above comments from #crazycoder and #magice, Make sure that you are not trying to load Pycharm with the same project two times which happened to me!!!.
For example, in windows10 already loaded with ONLY one project in PyCharm and tried to load another Pycharm instance by clicking on the PyCharm desktop shortcut or from task-bar if added. In this case, Pycharm will not load the second instance.
I have wasted some time here. So, wanted to share with the community as it will help someone out there!!
Cheers,