I need to implement sequential message processing on multiple consumers, but only one message per time on the queue. I have a lot of queues, but all of them are sequential and I need multiple consumers support for load balancing and redundancy. Anybody can tell whether it is real or not to limit number of unacknowledged message to 1 per queue?
Anybody can tell whether it is real or not to limit number of unacknowledged message to 1 per queue?
this isn't possible with multiple consumers. you can limit the number of unacknowledged messages using prefetch limit for a single channel, but not across multiple channels / consumers. it is tied to the channel of the consumer, not the queue.
the only way you can achieve this is with a single consumer and a single queue, using prefetch.
even then, you have no guarantee that the messages will arrive in the queue in the correct order.
(this is a fundamental difficulty with distributed systems of any kind, not a rabbitmq limitation)
look at the Message Sequencer and Resequencer patterns to try and put the messages back in order.
but even then, you're going to run into difficulty.
you'll also want to read up on idempotency so you don't re-process a message that has already been processed.
You should be able to configure your consumer to consume only X message(s) at time and same for your channel. Take a look at QOS or Consumer Prefetch
https://www.rabbitmq.com/consumer-prefetch.html
Here is an example, where multi-consumers will acknoledge only one message and channel allow only one message to be acknoledged (whatever how much consumers a plugged on it)
Channel channel = ...;
Consumer consumer1 = ...;
Consumer consumer2 = ...;
channel.basicQos(1, false); // Per consumer limit
channel.basicQos(1, true); // Per channel limit
channel.basicConsume("my-queue1", false, consumer1);
channel.basicConsume("my-queue2", false, consumer2);
Here, a consumer can acknoledge only one message each time, and the channel can only have one unacknoledged message. You didn't mention which language you use so you'll problably have to adapt this example.
Related
Let's suppose we have one producer, one queue and some consumers which are subscribed on queue.
Producer -> Queue -> Consumers
Queues contains messages about life events. These messages should receive all consumers.
When queue will be erased?
When all consumers get message?
Or when one of consumers confirm message with flag ack (true)?
And how to manage priority, who from consumers must to get message first/last (don't confuse with message priority).
As instance I have 10 consumers and I want that the fifth consumer get message first, remaining consumers later after specified time.
Be careful: when there are many consumers on one queue, only one of them will receive a given message, provided that it is consumed and acked properly. You need to bind as many queues as consumers to an exchange to have all consumers receive the message.
For your priority question, there is no built-in mecanism to have consumers receive the same message with a notion of priority: consumer priority exists (see https://www.rabbitmq.com/consumer-priority.html), but it is made to have consumer receive a given message before the others on a given queue, so the other consumers won't receive this message. It you need to orchestrate the delivery of your messages, you have to think of a more complex system (maybe a saga or a resequencer?).
Note that you can delay messages using this pattern. Again, this requires having multiple queues.
Finally, there are many scenarios when a queue is deleted. Take a look at the documentation, these are well explained.
We're seeing an issue where consumers of our message queues are picking up messages from queues at the top of the alphabetical range. We have two applications: a producer, and a subscriber. We're using RabbitMQ 3.6.1.
Let's say that the message queues are setup like so:
Our first application, the producer, puts say 100 messages/second onto each queue:
Our second application, the subscriber, has five unique consumer methods that can deal with messages on each respective queue. Each method binds to it's respective queue. A subscriber has a prefetch of 1 meaning it can only hold one message at a time, regardless of queue. We may run numerous instances of the subscriber like so:
So the situation is thus: each queue is receiving 100 msg/sec, and we have four instances of subscriber consuming these messages, so each queue has four consumers. Let's say that the consumer methods can deal with 25 msg/sec each.
What happens is that instead of all the queues being consumed equally, the alphabetically higher queues instead get priority. It's seems as though when the subscriber becomes ready, RabbitMQ looks down the list of queues that this particular ready channel is bound to, and picks the first queue with pending messages.
In our situation, A_QUEUE will have every message consumed. B_QUEUE may have some consumed in certain race conditions, but C_QUEUE/D_QUEUE and especially E_QUEUE will rarely get touched.
If we turn off the publisher, the queues will eventually drain, top to bottom.
Is it possible to configure either RabbitMQ itself or possibly even the channel to use some sort of round robin distribution policy or maybe even random policy so that when a channel has numerous bound queues, all with messages pending, the distribution is even?
to clarify: you have a single subscriber application with multiple consumers in it, right?
I'm guessing you're using a single RabbitMQ Connection within the subscriber app.
Are you also re-using a single RabbitMQ Channel for all of your consumers? If so, that would be a problem. Be sure to use a new Channel for each consumer you start.
Maybe the picture is wrong, but if it's not then your setup is wrong. You don't need 4 queues if you are going to have subscribers that listen to each and every queue. You'd just need one queue, that has multiple instances of the same subscriber consuming from it.
Now to answer, yes (but no need to configure, as long as prefetch is 1), actually rabbitmq does distribute messages evenly. You can find about about that here, and on the same place actually how your setup should look like. Here is a quote from the link.
RabbitMQ just dispatches a message when the message enters the queue.
It doesn't look at the number of unacknowledged messages for a
consumer. It just blindly dispatches every n-th message to the n-th
consumer.
I have one direct exchange. There is also one queue, bound to this exchange.
I have two consumers for that queue. The consumers are manually ack'ing the messages once they've done the corresponding processing.
The messages are logically ordered/sorted, and should be processed in that order. Is it possible to enforce that all messages are received and processed sequentially accross consumer A and consumer B? In other words, prevent A and B from processing messages at the same time.
Note: the consumers are not sharing the same connection and/or channel. This means I cannot use <channel>.basicQoS(1);.
Rationale of this question: both consumers are identicall. If one goes down, the other queue starts processing messages and everything keeps working without any required intervention.
One approach to handling failover in a case where you want redundant consumers but need to process messages in a specific order is to use the exclusive consumer option when setting up the bind to the queue, and to have two consumers who keep trying to bind even when they can't get the exclusive lock.
The process is something like this:
Consumer A starts first and binds to the queue as an exclusive consumer. Consumer A begins processing messages from the queue.
Consumer B starts next and attempts to bind to the queue as an exclusive consumer, but is rejected because the queue already has an exclusive consumer.
On a recurring basis, consumer B attempts to get an exclusive bind on the queue but is rejected.
Process hosting consumer A crashes.
Consumer B attempts to bind to the queue as an exclusive consumer, and succeeds this time. Consumer B starts processing messages from the queue.
Consumer A is brought back online, and attempts an exclusive bind, but is rejected now.
Consumer B continues to process messages in FIFO order.
While this approach doesn't provide load sharing, it does provide redundancy.
Even though this is already answered. May be this can help others.
RabbitMQ has a feature known as Single Active Consumer, which matches your case.
We can have N consumers attached to a Queue but only 1 (one) of them will be actively consuming messages from the Queue. Fail-over happens only when active consumer fails.
Kindly take a look at the link https://www.rabbitmq.com/consumers.html#single-active-consumer
Thank you
Usually the point of a MQ system is to distribute workload. Of course, there are some situations where processing of message N depends on result of processing the message N-1, or even the N-1 message itself.
If A and B can't process messages at the same time, then why not just have A or just B? As I see it, you are not saving anything with having 2 consumers in a way that one can work only when the other one is not...
In your case, it would be best to have one consumer but to actually do the parallelisation (not a word really) on the processing part.
Just to add that RMQ is distributing messages evenly to all consumers (in round-robin fashion) regardless on any criteria. Of course this is when prefetch is set to 1, which by default it is. More info on that here, look for "fair dispatch".
I need to choose a new Queue broker for my new project.
This time I need a scalable queue that supports pub/sub, and keeping message ordering is a must.
I read Alexis comment: He writes:
"Indeed, we think RabbitMQ provides stronger ordering than Kafka"
I read the message ordering section in rabbitmq docs:
"Messages can be returned to the queue using AMQP methods that feature
a requeue
parameter (basic.recover, basic.reject and basic.nack), or due to a channel
closing while holding unacknowledged messages...With release 2.7.0 and later
it is still possible for individual consumers to observe messages out of
order if the queue has multiple subscribers. This is due to the actions of
other subscribers who may requeue messages. From the perspective of the queue
the messages are always held in the publication order."
If I need to handle messages by their order, I can only use rabbitMQ with an exclusive queue to each consumer?
Is RabbitMQ still considered a good solution for ordered message queuing?
Well, let's take a closer look at the scenario you are describing above. I think it's important to paste the documentation immediately prior to the snippet in your question to provide context:
Section 4.7 of the AMQP 0-9-1 core specification explains the
conditions under which ordering is guaranteed: messages published in
one channel, passing through one exchange and one queue and one
outgoing channel will be received in the same order that they were
sent. RabbitMQ offers stronger guarantees since release 2.7.0.
Messages can be returned to the queue using AMQP methods that feature
a requeue parameter (basic.recover, basic.reject and basic.nack), or
due to a channel closing while holding unacknowledged messages. Any of
these scenarios caused messages to be requeued at the back of the
queue for RabbitMQ releases earlier than 2.7.0. From RabbitMQ release
2.7.0, messages are always held in the queue in publication order, even in the presence of requeueing or channel closure. (emphasis added)
So, it is clear that RabbitMQ, from 2.7.0 onward, is making a rather drastic improvement over the original AMQP specification with regard to message ordering.
With multiple (parallel) consumers, order of processing cannot be guaranteed.
The third paragraph (pasted in the question) goes on to give a disclaimer, which I will paraphrase: "if you have multiple processors in the queue, there is no longer a guarantee that messages will be processed in order." All they are saying here is that RabbitMQ cannot defy the laws of mathematics.
Consider a line of customers at a bank. This particular bank prides itself on helping customers in the order they came into the bank. Customers line up in a queue, and are served by the next of 3 available tellers.
This morning, it so happened that all three tellers became available at the same time, and the next 3 customers approached. Suddenly, the first of the three tellers became violently ill, and could not finish serving the first customer in the line. By the time this happened, teller 2 had finished with customer 2 and teller 3 had already begun to serve customer 3.
Now, one of two things can happen. (1) The first customer in line can go back to the head of the line or (2) the first customer can pre-empt the third customer, causing that teller to stop working on the third customer and start working on the first. This type of pre-emption logic is not supported by RabbitMQ, nor any other message broker that I'm aware of. In either case, the first customer actually does not end up getting helped first - the second customer does, being lucky enough to get a good, fast teller off the bat. The only way to guarantee customers are helped in order is to have one teller helping customers one at a time, which will cause major customer service issues for the bank.
It is not possible to ensure that messages get handled in order in every possible case, given that you have multiple consumers. It doesn't matter if you have multiple queues, multiple exclusive consumers, different brokers, etc. - there is no way to guarantee a priori that messages are answered in order with multiple consumers. But RabbitMQ will make a best-effort.
Message ordering is preserved in Kafka, but only within partitions rather than globally. If your data need both global ordering and partitions, this does make things difficult. However, if you just need to make sure that all of the same events for the same user, etc... end up in the same partition so that they are properly ordered, you may do so. The producer is in charge of the partition that they write to, so if you are able to logically partition your data this may be preferable.
I think there are two things in this question which are not similar, consumption order and processing order.
Message Queues can -to a degree- give you a guarantee that messages will get consumed in order, they can't, however, give you any guarantees on the order of their processing.
The main difference here is that there are some aspects of message processing which cannot be determined at consumption time, for example:
As mentioned a consumer can fail while processing, here the message's consumption order was correct, however, the consumer failed to process it correctly, which will make it go back to the queue. At this point the consumption order is intact, but the processing order is not.
If by "processing" we mean that the message is now discarded and finished processing completely, then consider the case when your processing time is not linear, in other words processing one message takes longer than the other. For example, if message 3 takes longer to process than usual, then messages 4 and 5 might get consumed and finish processing before message 3 does.
So even if you managed to get the message back to the front of the queue (which by the way violates the consumption order) you still cannot guarantee they will also be processed in order.
If you want to process the messages in order:
Have only 1 consumer instance at all times, or a main consumer and several stand-by consumers.
Or don't use a messaging queue and do the processing in a synchronous blocking method, which might sound bad but in many cases and business requirements it is completely valid and sometimes even mission critical.
There are proper ways to guarantuee the order of messages within RabbitMQ subscriptions.
If you use multiple consumers, they will process the message using a shared ExecutorService. See also ConnectionFactory.setSharedExecutor(...). You could set a Executors.newSingleThreadExecutor().
If you use one Consumer with a single queue, you can bind this queue using multiple bindingKeys (they may have wildcards). The messages will be placed into the queue in the same order that they were received by the message broker.
For example you have a single publisher that publishes messages where the order is important:
try (Connection connection2 = factory.newConnection();
Channel channel2 = connection.createChannel()) {
// publish messages alternating to two different topics
for (int i = 0; i < messageCount; i++) {
final String routingKey = i % 2 == 0 ? routingEven : routingOdd;
channel2.basicPublish(exchange, routingKey, null, ("Hello" + i).getBytes(UTF_8));
}
}
You now might want to receive messages from both topics in a queue in the same order that they were published:
// declare a queue for the consumer
final String queueName = channel.queueDeclare().getQueue();
// we bind to queue with the two different routingKeys
final String routingEven = "even";
final String routingOdd = "odd";
channel.queueBind(queueName, exchange, routingEven);
channel.queueBind(queueName, exchange, routingOdd);
channel.basicConsume(queueName, true, new DefaultConsumer(channel) { ... });
The Consumer will now receive the messages in the order that they were published, regardless of the fact that you used different topics.
There are some good 5-Minute Tutorials in the RabbitMQ documentation that might be helpful:
https://www.rabbitmq.com/tutorials/tutorial-five-java.html
I have a RabbitMQ setup where a (java) producer sends messages to a fanout exchange, which are handled by a consumer. It's no problem if messages get lost when the consumer dies, so for performance I set autoAck=true at the consumer side.
Now I'm investigating a situation in which the rate the consumer can handle messages, is lower than the rate at which they are sent.
After a while, a (huge) backlog of messages must queue up somewhere. Is there a way to get visibility on this backlog?
Using the rabbitmqmanagement interface does not work: the queue appears empty
Ready: 0
Unacknowledged: 0
Total: 0
I assume the queue is empty because the messages are (unlimitedly) prefetched by the rabbitmqclient used by the consumer. But limiting the prefetch by e.g.
channel.basicQos(10)
does not help either, probably because this only limits unacknowledged messages, and with autoAck=true, messages are ack'ed from the moment they are prefetched by the client.
Setting autoAck=false (and explicit ack'ing on delivery) is a solution (the Unacknowledged counter keeps on rising), but I was wondering whether this is the only way?
Preferably I'd like to limit the amount of cached messages at the client side irrespective of acknowledgements, such that the backlog eventually becomes visible through the rabbitmqmanagement interface.
Alternatively, is there a way to query the number of messages sitting somewhere in the client's prefetch queue waiting to be delivered?
I suggest using a combination of basicQos and autoAck=false. This will make everything show up in the queues both through the admin website and the REST APIs. Having an unlimited number of messages sent to each consumer seems to defeat the point of a queue.
If your queues are time sensitive you can also add a TTL on the queues so that messages are automatically Nacked after (as an example) 60 minutes.