redis key after redis server shutdown and restart not available - redis

To add keys to redis I did the following via the redis CLI:
127.0.0.1:6379> KEYS *
1) "key1"
2) "key2"
3) "key3"
127.0.0.1:6379> SET name "rahul"
OK
127.0.0.1:6379> KEYS *
1) "key1"
2) "name"
3) "key2"
4) "key3"
127.0.0.1:6379>
To validate the persistence of the data in my redis data store, I re-started the server, upon checking the keys, I found few keys to be missing :
127.0.0.1:6379> KEYS *
1) "key3"
2) "key2"
3) "key1"
127.0.0.1:6379>
Are there any specific naming conventions for redis keys. I was using a Windows system. Any idea of what has gone wrong. TIA.

If you do a graceful shutdown values will be written to disk before the service is shutdown. If it's a abrupt shutdown or power failure values will be lost. For that you can enable persistance (RDB or AOF). By default redis follows RDB snapshotting, by default it takes snapshot based on three conditions
1) atleast one keys changed for 15 mins.
2) atleast ten keys changed for 5 mins.
3) atleast 10,000 keys changed for 1 min.
You can change these values in redis.conf file under SNAPSHOTTING.
Try reading the redis.conf file fully, it will give you more detailed explanations.

Related

Watch updates in redis graph

I've recently discovered that redis has a property graph model implementation called redis graph and it's amazing.
One thing that I really miss for my use-case though, is the ability to "watch" the data. In typical redis data structures I can enable Keyspace notifications or client tracking and be notified on the data mutations I'm interested in, pull data from the server or mark my local cache as "dirty".
I don't know how that would work for a property graph since relations are much more complex (and the key feature for that matter), but is there a way to watch or synchronize with data stored in redis graph?
Keyspace notifications can be enabled for modules like this:
redis.cloud> CONFIG SET notify-keyspace-events AKE
The 'A' part includes modules—if the module publishes anything. Unfortunately, I tried this with RedisGraph, and it doesn't.
You can reproduce my test below. In one terminal I launched redis-cli and did this:
127.0.0.1:6379> PSUBSCRIBE *
Reading messages... (press Ctrl-C to quit)
1) "psubscribe"
2) "*"
3) (integer) 1
In another I did this:
127.0.0.1:6379> GRAPH.QUERY test 'CREATE (n:foo { alfa: 12, bravo: "test" })'
1) 1) "Labels added: 1"
2) "Nodes created: 1"
3) "Properties set: 2"
4) "Cached execution: 0"
5) "Query internal execution time: 0.204701 milliseconds"
127.0.0.1:6379> GRAPH.QUERY test 'MATCH (n) RETURN n'
1) 1) "n"
2) 1) 1) 1) 1) "id"
2) (integer) 0
2) 1) "labels"
2) 1) "foo"
3) 1) "properties"
2) 1) 1) "alfa"
2) (integer) 12
2) 1) "bravo"
2) "test"
3) 1) "Cached execution: 0"
2) "Query internal execution time: 1.106191 milliseconds"
127.0.0.1:6379> GRAPH..DELETE test
"Graph removed, internal execution time: 0.064498 milliseconds"
The first terminal returned nothing in response to this.
No. Unfortunately, currently, there is no way to trigger a keyspace notification whenever nodes or relationships are created, removed, or updated.
We plan to add such functionality in the future, but there is no specific date we can share right now.

How to know connected slaves to a master in redis?

In redis-cli in master system, what command is used to know the list of slaves connected to the master.
I only got command to know the status of a server.
To know the status of current server, open redis-cli:
> role
1) "master"
2) (integer) 196364
3) 1)
1) "192.168.1.90"
2) "6379"
3) "196364"
2)
1) "192.168.1.7"
2) "6379"
3) "196364"
The easiest way to list all replicas connected to a Redis master is by with the CLIENT LIST command, i.e.:
CLIENT LIST TYPE replica
Note: the TYPE subscommand was added in v5.

Why do I see SET in slave's slowlog?

My setting is Redis master-slave replication. I am sure the slaves are read only because when I connect to slave and try to write data, "(error) READONLY You can't write against a read only slave." is returned.
However, when I check the slowlog there are SET commands, eg:
127.0.0.1:6379> slowlog get 1
1) 1) (integer) 1360
2) (integer) 1544276677
3) (integer) 10653
4) 1) "SET"
2) "some value"
Anyone can explain this? Thanks in advance.
The Redis replica is replaying commands sent from the master, so the SET command must have originated from it.
It is unclear why that command ended in the slowlog, but it could be because of any number of reasons (IO or CPU blockage). If this happened once I wouldn't worry about it, but if it is pathological you may want to review your replica's infrastructure and configuration.

Number of expiring keys listed by info command on redis slave not consistent with what I see

When I run the info command in redis-cli against a redis 3.2.4 server, it shows me this for expires:
expires=223518
However, when I then run a keys * command and ask for the ttl for each key, and only print out keys with a ttl > 0, I only see a couple hundred.
I thought that the expires is a count of the number of expiring keys but I am not even within an order of magnitude of this number.
Can someone clarify exactly what expires is meant to convey? Does this include both to-be-expired and previously expired but not yet evicted keys?
Update:
Here is how I counted the number of keys expiring:
task count_tmp_keys: :environment do
redis = Redis.new(timeout: 100)
keys = redis.keys '*'
ct_expiring = 0
keys.each do |k|
ttl = redis.ttl(k)
if ttl > 0
ct_expiring += 1
puts "Expiring: #{k}; ttl is #{ttl}; total: #{ct_expiring}"
STDOUT.flush
end
end
puts "Total expiring: #{ct_expiring}"
puts "Done at #{Time.now}"
end
When I ran this script it shows I have a total expiring of 78
When I run info, it says db0:keys=10237963,expires=224098,avg_ttl=0
Because 224098 is so much larger than 78, I am very confused. Is there perhaps a better way for me to obtain a list of all 225k expiring keys?
Also, how is it that my average ttl is 0? Wouldn't you expect it to be nonzero?
UPDATE
I have new information and a simple, 100% repro of this situation locally!
To repro: setup two redis processes locally on your laptop. Make one a slave of the other. On the slave process, set the following:
config set slave-serve-stale-data yes
config set slave-read-only no
Now, connect to the slave (not the master) and run:
set foo 1
expire foo 10
After 10 seconds, you will no longer be able to access foo, but info command will still show that you have 1 key expiring with an average ttl of 0.
Can someone explain this behavior?
expires contains existing keys with TTL which will expire, not including already expired keys.
Example ( with omission of extra information from info command for brevity ):
127.0.0.1:6379> flushall
OK
127.0.0.1:6379> SETEX mykey1 1000 "1"
OK
127.0.0.1:6379> SETEX mykey2 1000 "2"
OK
127.0.0.1:6379> SETEX mykey3 1000 "3"
OK
127.0.0.1:6379> info
# Keyspace
db0:keys=3,expires=3,avg_ttl=992766
127.0.0.1:6379> SETEX mykey4 1 "4"
OK
127.0.0.1:6379> SETEX mykey5 1 "5"
OK
127.0.0.1:6379> info
# Keyspace
db0:keys=3,expires=3,avg_ttl=969898
127.0.0.1:6379> keys *
1) "mykey2"
2) "mykey3"
3) "mykey1"
127.0.0.1:6379>
Given that in your situation you are asking about key expiry on slaves, per https://github.com/antirez/redis/issues/2861:
keys on a slave are not actively expired, and thus the avg_ttl is
never calculated
And per https://groups.google.com/forum/#!topic/redis-db/NFTpdmpOPnc:
avg_ttl is never initialized on a slave and thus it can be what ever
arbitrary value resides in memory at that place.
Thus, it is to be expected that the info command behaves differently on slaves.
The expires just returns the size of keys that will expire not the time.
The source code of 3.2.4
long long keys, vkeys;
keys = dictSize(server.db[j].dict);
vkeys = dictSize(server.db[j].expires);
if (keys || vkeys) {
info = sdscatprintf(info,
"db%d:keys=%lld,expires=%lld,avg_ttl=%lld\r\n",
j, keys, vkeys, server.db[j].avg_ttl);
}
It just calculate the size of server.db[j].expires. (note j is the database index).

Spring Session Token

Explored spring session and redis it looks really good.
Trying to solve one question for a long time , how to retrieve list of session token from redis db based on the spring session token value in the hash .
I know its not a relational database and there is no straightforward way to achieve but is that a way to figure this out which is really important for us to solve problems
I read in blogs we need to keep a set to track , are there any ways to acheive this when using spring session. i am not even sure how to do this
Any help is highly appreciated .
Thank you
Useful Commands:
redis-cli : To enter into redis console
Example:
root#root>redis-cli
127.0.0.1:6379> _
keys * :Shows all keys stored in redis DB
Example:
127.0.0.1:6379>keys *
“spring:session:expirations:1440354840000“
“spring:session:sessions:3b606f6d-3d30-4afb-bea6-ef3a4adcf56b“
monitor : To monitor the redis DB
127.0.0.1:6379> monitor
OK
1441273902.701071 [0 127.0.0.1:49137] "PING"
1441273920.000888 [0 127.0.0.1:49137] "SMEMBERS"
hgetall SESSION_ID :To check all the keys stored inside a session
example: :
127.0.0.1:6379>hgetall spring:session:sessions:3b606f6d-3d30-4afb-bea6-ef3a4adcf56b
flushall Remove all keys from the DB.
Example :
127.0.0.1:6379> flushall
ok
Open redis-cli then run
127.0.0.1:6379> keys *
1) "spring:session:expirations:1435594380000"
2) "spring:session:sessions:05adb1d7-c7db-4ffb-99f7-47d7bd1867ee"
127.0.0.1:6379> type spring:session:sessions:05adb1d7-c7db-4ffb-99f7-47d7bd1867ee
hash
127.0.0.1:6379> hgetall spring:session:sessions:05adb1d7-c7db-4ffb-99f7-47d7bd1867ee
1) "sessionAttr:SPRING_SECURITY_CONTEXT"
2) ""
3) "sessionAttr:javax.servlet.jsp.jstl.fmt.request.charset"
4) "\xac\xed\x00\x05t\x00\x05UTF-8"
5) "creationTime"
6) "\xac\xed\x00\x05sr\x00\x0ejava.lang.Long;\x8b\xe4\x90\xcc\x8f#\xdf\x02\x00\x01J\x00\x05valuexr\x00\x10java.lang.Number\x86\xac\x95\x1d\x0b\x94\xe0\x8b\x02\x00\x00xp\x00\x00\x01N?\xfb\xb6\x83"
7) "maxInactiveInterval"
8) "\xac\xed\x00\x05sr\x00\x11java.lang.Integer\x12\xe2\xa0\xa4\xf7\x81\x878\x02\x00\x01I\x00\x05valuexr\x00\x10java.lang.Number\x86\xac\x95\x1d\x0b\x94\xe0\x8b\x02\x00\x00xp\x00\x00\a\b"
9) "lastAccessedTime"
10) "\xac\xed\x00\x05sr\x00\x0ejava.lang.Long;\x8b\xe4\x90\xcc\x8f#\xdf\x02\x00\x01J\x00\x05valuexr\x00\x10java.lang.Number\x86\xac\x95\x1d\x0b\x94\xe0\x8b\x02\x00\x00xp\x00\x00\x01N?\xfb\xb6\xa6"
127.0.0.1:6379>