I'd like to create a VERY simple access to a Baikal CalDav/CardDav server to read address book and calenders entries. No update required, read-only!
The whole thing must run with Python 2.6 (Win32) - not 2.7 or 3.x.
I found these packages:
CalDav: https://pypi.python.org/pypi/caldav/0.4.0
CardDav: https://github.com/ljanyst/carddav-util
Well they have some dependencies which I installed and they both use lxml. So I installed this:
https://pypi.python.org/pypi/lxml/3.6.0
But now running a simple program using both libs (carddav, caldav) I encounter the following error:
File "C:\Python26\lib\site-packages\carddav.py", line 46, in <module>
import lxml.etree as ET
ImportError: DLL load failed: Die angegebene Prozedur wurde nicht gefunden.
So it seems that although the lib lxml is the latest release it does not work with carddav.py!
I tried older versions of lxml - e.g. 2.2.4 - and then it seems to work?!
What has changed and how do I work around this issue? I would really like to use lxml 3.60!
Note that Python26 and all libs are Win32.
Thank you!
Related
After installing Anaconda on a Virtual Machine I run a script which is working on my local machine but not on my Virtual Machine.
I'm getting the error Message:
C:\Users\...\python>"C:\ProgramData\Anaconda3\python.exe" "C:\Users\...\reporting.py"
C:\ProgramData\Anaconda3\lib\site-packages\numpy\__init__.py:140: UserWarning: mkl-service package failed to import, therefore Intel(R) MKL initialization ensuring its correct out-of-the box operation under condition when Gnu OpenMP had already been loaded by Python process is not assured. Please install mkl-service package, see http://github.com/IntelPython/mkl-service
from . import _distributor_init
Traceback (most recent call last):
File "C:\Users\...\reporting.py", line 1, in <module>
import pandas as pd
File "C:\ProgramData\Anaconda3\lib\site-packages\pandas\__init__.py", line 16, in <module>
raise ImportError(
ImportError: Unable to import required dependencies:
numpy:
IMPORTANT: PLEASE READ THIS FOR ADVICE ON HOW TO SOLVE THIS ISSUE!
Importing the numpy C-extensions failed. This error can happen for
many reasons, often due to issues with your setup or how NumPy was
installed.
We have compiled some common reasons and troubleshooting tips at:
https://numpy.org/devdocs/user/troubleshooting-importerror.html
Please note and check the following:
* The Python version is: Python3.8 from "C:\ProgramData\Anaconda3\python.exe"
* The NumPy version is: "1.18.5"
and make sure that they are the versions you expect.
Please carefully study the documentation linked above for further help.
Original error was: DLL load failed while importing _multiarray_umath: The specified module could not be found.
The VM has no Internet. Is there any way to install all the required libs and frameworks?
You can package your script and used libraries using something like Pyinstaller. When you use an virtualenv keep in mind that all the packages that you use during pyinstaller execution are stored and may lead to an huge .exe
Below are the mentioned error while importing pandas library in Power BI in python script.
Details: "ADO.NET: Python script error.
C:\USERS\YADAVP\ANACONDA3\lib\site-packages\numpy\__init__.py:140: UserWarning: mkl-service package failed to import, therefore Intel(R) MKL initialization ensuring its correct out-of-the box operation under condition when Gnu OpenMP had already been loaded by Python process is not assured. Please install mkl-service package, see http://github.com/IntelPython/mkl-service
from . import _distributor_init
Traceback (most recent call last):
File "PythonScriptWrapper.PY", line 2, in <module>
import os, pandas, matplotlib
File "C:\USERS\YADAVP\ANACONDA3\lib\site-packages\pandas\__init__.py", line 17, in <module>
"Unable to import required dependencies:\n" + "\n".join(missing_dependencies)
ImportError: Unable to import required dependencies:
numpy:
IMPORTANT: PLEASE READ THIS FOR ADVICE ON HOW TO SOLVE THIS ISSUE!
Importing the numpy c-extensions failed.
- Try uninstalling and reinstalling numpy.
- If you have already done that, then:
1. Check that you expected to use Python3.7 from "C:\USERS\YADAVP\ANACONDA3\python.exe",
and that you have no directories in your PATH or PYTHONPATH that can
interfere with the Python and numpy version "1.18.1" you're trying to use.
2. If (1) looks fine, you can open a new issue at
https://github.com/numpy/numpy/issues. Please include details on:
- how you installed Python
- how you installed numpy
- your operating system
- whether or not you have multiple versions of Python installed
- if you built from source, your compiler versions and ideally a build log
- If you're working with a numpy git repository, try `git clean -xdf`
(removes all files not under version control) and rebuild numpy.
Note: this error has many possible causes, so please don't comment on
an existing issue about this - open a new one instead.
Original error was: DLL load failed: The specified module could not be found.
What is the resolution to sort this kind of error in Power BI?
Forget Anaconda and use WinPython.
I tried Anaconda for days with all the workarounds available in StackOverflow and other forums, and they took me nowhere.
Then I tried WinPython, and it worked immediately. Of course, you will need to change the PowerBI options accordingly.
To install WinPython: https://github.com/winpython/winpython
To change the detected Python home directory: https://learn.microsoft.com/en-us/power-bi/connect-data/desktop-python-scripts#enable-python-scripting
If you consider my answer, you won't need to downgrade Python, PBI, or anything else.
I had the same error. Unfortunately, PowerBI wont work with Jupyter Notebook Python.
So you have to install a "normal" Python: https://www.python.org/downloads/
And configure the Python you want to use in PowerBI and install your needed Python libraries via pip
Edit: Please use Python 3.8 because 3.9 doesnt support NumPy for now
I am trying to get boost 1.69 working with visual studio 2107. My goal is to use Numpy in C++
When I include #include boost/python/numpy.hpp
The error I am getting is:
Searching C:\boost_1_69_0\stage\lib\boost_python37-vc141-mt-gd-x32-1_69.lib:
1>LINK : fatal error LNK1104: cannot open file 'boost_numpy37-vc141-mt-gd-x32-1_69.lib'
I am pretty sure that I have this file in this directory.
My architucture in the project is x86, 32-bit addrressing
I built boost as follows:
.\bbotstarp.bat
.\b2 -j8 --toolset=msvc-14.1 --build-type=complete link=static runtime-link=static architecture=x86 address-model=32 stage --with-python
I added the include and link folders to the project.
I do not use precompiled headers
Is there anything that I am missing?
Thanks
I had the same problem. It seems like Boost python is not supported by python 3.7 vert well.
Using python 3.6 will solve this problem.
I have been looking at this issue for months and finally figure out the root cause and solutions. The root cause that boost numpy is not built is because numpy is unable to be imported when ./b2 checks for numpy. As a clue from this post Using boost numpy with visual studio 2019 and python 3.8, you can append --debug-configuration to see the debugging information of boost python building process like this in my PC
notice: [python-cfg] Checking for NumPy...
notice: [python-cfg] running command 'C:/Anaconda3_Install_Root/envs/my_envs/python -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_include())"'
And, the error comes from ImportError for some reason:
ImportError: DLL load failed while importing _multiarray_umath: The specified module could not be found.
After looking at this post numpy is already installed with Anaconda but I get an ImportError (DLL load failed: The specified module could not be found), I found this import process has to be under python environment such as under conda environment or PyCharm terminal (They both work in my PC) with all the required PATH to be imported. Now I can generate numpy static library with Python 3.8, VS 2019, boost v1.74, Windows 10. The command I use to build boost python is .\b2 --with-python python-debugging=off threading=multi variant=release li
nk=static address-model=64 stage --debug-configuration. Hopefully, that will work in yours.
I'm trying to run session_test.py from https://github.com/tensorflow/tensorflow/blob/master/tensorflow/python/client/session_test.py, So in my anaconda, tensorflow virtual env, I went to the corresponding directory in tensorflow like ../master/tensorflow/python/client/.. and run
python session_test.py
I got exception info like this:
Traceback (most recent call last):
File "session_test.py", line 32, in
from tensorflow.core.protobuf import cluster_pb2
ImportError: cannot import name 'cluster_pb2'
What package I should install or related documents that I could read about it. Is there anyone trying to do the same thing, run those unit test coming along with each module in tensorflow repo?
Please help me, thanks!
That line was added just a couple of weeks ago (see commit), and relates to a new feature being implemented in TensorFlow. Unless you have compiled and installed a very bleeding-edge version of TensorFlow you won't be able to run it. Instead, try to run the script corresponding to the version of TensorFlow that you have installed (for example, this is for version 1.1.0, the latest stable release at the time of writing).
I'm getting the below error when I'm trying to run a test case in RobotFramework. I installed Selenium2Library but it looks like RF can't find it. Everything works fine with SeleniumLibrary.
Selenium2Library is installed in C:\Python27\lib\site-packages. I uninstalled and installed it a few times to make sure the installation is correct. There were no errors during the installations.
Any ideas where to look for the problem?
Here is the error:
c:\testing>pybot testone.txt
[ ERROR ] Error in file 'c:\testing\testone.txt' in table 'Settings': Importing test library 'Selenium2Library' failed: ImportError: No module named selenium
Traceback (most recent call last):
File "C:\Python27\lib\site-packages\Selenium2Library\__init__.py", line 2, in <module>
from keywords import *
File "C:\Python27\lib\site-packages\Selenium2Library\keywords\__init__.py", line 3, in <module>
from _browsermanagement import _BrowserManagementKeywords
File "C:\Python27\lib\site-packages\Selenium2Library\keywords\_browsermanagement.py", line 4, in <module>
from selenium import webdriver
PYTHONPATH:
C:\Python27\lib\site-packages\robot\libraries
C:\Python27\lib\site-packages
C:\Windows\system32\python27.zip
C:\Python27\DLLs
C:\Python27\lib
C:\Python27\lib\plat-win
C:\Python27\lib\lib-tk
C:\Python27
C:\Python27\lib\site-packages\wx-2.8-msw-unicode
Resolved the problem by removing Selenium2Library folder and reinstalling it with pip command (which installs all necessary packages).
pip install robotframework-selenium2library
I also had a similar problem. I'm running both Python 3.7 and 3.8 because RIDE does not work with 3.8.
I had installed robot framework for Python 3.8 before, and after that I installed everything on 3.7. The problem was fixed when I uninstalled robot framework (and every package related to it) from 3.8 and installed every package on Python 3.7 only.