I have a project that makes use of three different additional reference libraries. The project compiles and runs correctly with all actions behaving as expected for the libraries (PulseButton, Log4Net & WpfAnimatedGif). However as soon as I try to build the project through TFS 2015 I get an error:
If I take out all references to the PulseButton from the project, I get the same error for the next Reference Library I have introduced to the project.
I have checked the actual file locations for the References and all seems to be in order there as well.
I am referencing in the XAML:
<Window x:Name="frmMain" x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="clr-namespace:ePortfolio_Client"
xmlns:gif="http://wpfanimatedgif.codeplex.com"
xmlns:pb="clr-namespace:NMT.Wpf.Controls;assembly=PulseButton"
Title="t2 - ePortfolio" Height="740" Width="1370" ResizeMode="CanMinimize" Icon="Content/Portfolio.ico" WindowStartupLocation="CenterScreen" >
I appreciate this is quite a vague question but am a bit stuck. Any help on what might be causing my problems is greatly appreciated.
EDIT
After a little bit of snuffling around I have a feeling it is to do with the DLLs not being installed on the TFS server. I am guessing I need to install these through Visual Studio? Any other help here would be great!
Silly really - should have tried this before testing... My Edit above was hinting down the right path. My Build Definition is working at Project Level (instead of Solution) so the DLLs installed through NuGet were not being picked up. NuGet installs in a Packages folder on the root of the solution... This was not being carried over.
I created a new folder in the Project and moved the DLLd there. I then went to the Project properties and updated the Reference Paths and all seemed to be fine.
Now im getting an error regarding the Signing Certificate due to it being password protected... Nearly there!
Related
I must put this program into production today, and I can't get it to run independently.
In the program, I have included NuGet package "Imports ClosedXML.Excel" and use it to create spreadsheets. When I build my executable, and try to run it from another computer, it cannot find the ClosedXML and Documentformat.OpenXml assemblies.
I checked in References that "Copy Local" was = True for ClosedXML and Documentformat.OpenXml, but it's not working. I found another website that mentioned Global Assembly Cache, and that if the dependency is in there, it will not be included in the Build .exe.
I am running Visual Studio Professional 2017. I am in over my head on this one, so if you have answer (and I hope you do), please try to provide it in elementary terms I can understand.
Sometimes issue is solved by individually adding application files inside the following menu
Go to Publish-->Application Files
Select Show all files
Under Publish Status
Set the files you need to Include [not include(auto)]
I wonder if this is some sort of reference issue in Visual Studio Express 2013. I am building from source so none of these files should have to be registered after the fact. Upon running the type library from the bin folder in an external program as a custom command, it returns the interop.scripting.dll not found error. What could be causing this? Does it matter that some reference paths for COM files point to the obj folder and not bin (I think this is normal)?
Example references (I can't post images yet) --
C:\FNNTQuarterlyReports\SourceCode\obj\Debug\Interop.esriSystemUtility.dll
C:\Program Files\ArcGIS\DotNet\ESRI.ArcGIS.Catalog.dll
C:\FNNTQuarterlyReports\SourceCode\obj\Debug\Interop.Scripting.dll
c:\Program Files\Microsoft Visual Basic 2005 Power Packs\3.0\Microsoft.VisualBasic.PowerPacks.dll
This has been solved. Not entirely sure of the details, but I started fresh with a backup copy of the source and left the original .NET and COM references as-is. The key difference is the use of powerpacks.VS as opposed to the new 3.0, and older ESRI dlls (dating to 9.1 period). All had copy-local set to true. For some reason this build works fine... trying to modernize the references somehow messed things up, possibly due to a compatibility issue, or some other oversight. Thanks for the help.
When opening an MVC4 C# web project in Visual Studio 2013, the IDE reports the error "The type or namespace name '_' could not be found (are you missing a using directive or an assembly reference)", but the project builds and runs without any errors. Furthermore, intellisense does not include the project namespace.
The "missing" reference is to files within the same project.
for example; the web project namespace is "webproject.com", and references in a controller files to "webproject.com.models" is underlined in red with the error above.
I have checked the following:
All Solution projects are configured to use the same Target Framework(.Net 4)
web.config in the Views folder contains the namespace in the system.web.webPages.razor section
cleaned and rebuilt solution
deleted all bin and obj content
deleted .suo and .csproj.user files that were created by VS2010
The only way that I can get rid of these errors being reported in VS2013 is to unload then reload the project.
When opened in Visual Studio 2010 I do not get these problems.
I have the same issue.
ALthough the project compiles correctly, the code editor shows an error The type or namespace name '_' could not be found (are you missing a using directive or an assembly reference).
THere is one workaround. Just delete the *.SUO files and re-open the solution. THen for this only Session it works. Unfortunately after closing and reopening the solution the issue is back again. VS 2012 works fine.
Seems to be a bug in VS 2013....
My solution, when I encountered the problem with VS 2013 Express edition was to simply unload the offending project and reload. Opening the SUO or Project file and making changes had not affect.
Try to unload the project in VS2013, then right click the node and select edit "projectname.csproj". Check the individual references they might point to somewhere strange.
EDIT: the csproj file is an xml file and the references are located under Project -> ItemGroup -> Reference
I had the same issue.
It's a VS 2012 solution with different projects.
Search for all *.suo files and deleted them.
Rebuild and reopen Visual Studio.
There's a known issue with Web Application projects when bound to a TFS server that sounds like this issue. This occurs when the following TFS setting option is checked:
Options -> Source Control -> Environment -> Get everything when a solution or project is opened.
Disabling this option resolves the problem.
thanks,
Miguel Lacouture
[MSFT]
Same issue, on project reference.
I opened the referenced project file (*.csproj) with a text editor and did some cleanup:
1) reset these properties' values:
<PublishUrl>publish\</PublishUrl>
<InstallFrom>Disk</InstallFrom>
<UpdateEnabled>false</UpdateEnabled>
<IsWebBootstrapper>false</IsWebBootstrapper>
<TargetFrameworkProfile />
2) removed dirty platform/configurations:
<PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'x86|AnyCPU'">
...
<PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'x86|x86'">
...
Now I can compile without any issue.
Glad to share it with you! :))
Same issue. Opening the project's properties and making a change to the name (or any value) and then rebuilding seems to have resolved it.
I have just had this problem and none of the solutions here helped. I fixed mine by doing a repair of Visual Studio (An option when you select to uninstall the program). Hope this helps someone
I had same issue when I added a new class file ( e.g. MyClass.cs) and called it in some other C# code places. For some reason VS did not add that new class file to my working project folder (not seen in VS, but seen in Windows File Explorer). And, hence, the compile path for new class file is not included in the compile section of my project file (e.g. MyProject.csproj). So to solve this problem, First, right click on your working project > Add > Existing Item ... > Select your new class > OK.
Then, check the project file (*.csproj) and make sure a new element is inserted in the compile section such as:
Finally, rebuild your project and the problem should be solved.
Another reason for this issue is the project, I had long ago with VS, is my other project was set up with Client Profile as its target framework. So, to solve the issue: Right click your project in VS > Properties > Application tab > make sure Target Framework option is not Client Profile. You should change all projects in your solution to the same framework version AND all of them must not have Client Profile option.
Microsoft just released a new security update to be automatically applied to machines configured to use Microsoft Update.
Unfortunately, some ASP.NET MVC 3 and 4 VS projects can no longer build after the update is applied. These projects will fail with the following error:
"Could not locate the assembly "System.Web.Mvc,Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,processorArchitecture=MSIL"
My project also had the error "The type or namespace name 'System.Web.Mvc' could not be found (are you missing a using directive or an assembly reference)". Installing the latest version of Microsoft.AspNet.Mvc solved my problem. See the following article from Microsoft for more info:
http://blogs.msdn.com/b/webdev/archive/2014/10/16/microsoft-asp-net-mvc-security-update-broke-my-build.aspx
Unloading and then reloading the project worked for me.
We have a ASP.NET MVC with 4-5 different build configurations. Whenever we change the build configuration, we need to delete the obj folder for the web project, since we get the 'allowDefinition='MachineToApplication' error. A pain, but we managed by deleting the folder in pre/post build events.
Now I need to configure our CI to build deployment packages. This means that I cannot delete the obj folder. Every time I compile e.g. with the following msbuild parameters
/p:CreatePackageOnPublish=true /p:DeployOnBuild=true
I recieve the error:
web.config(123): error ASPCONFIG: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
As far as I understand, the problem is that there's multiple .config files in the project - In our case, there's not. I could really use some help to find an explanation and find a permanent (no- hack) fix.
Edit:
This question is marked as a duplicate, but the corresponding answers and cause(s) in the 2 threads, are clearly different from each other. Not sure what is intended with this tag - I've read that particular post before posting this question, as it didn't answer my question. There's multiple causes for this error message. It is 'similar', but definitely not a duplicate!
There is a similar question here on SO with some good solutions for this issue.
The problem is that building a deployment package creates a copy of the web.config in a subfolder of /obj. That will normally be be cleared out if you do a rebuild or a clean. However, if you build a deployment package in one configuration (e.g. Debug) and then switch to another confguration (e.g. Release) the obj/Debug folder is not cleared out and the web.config file there causes problems.
The quick solution is to clean all configurations and then do a (re)build. Alternatively you could delete the /obj folder in your project.
To permanently resolve the issue you can either move the intermediate output (/obj) out of your project folder or modify the project to force a clean of all configurations on rebuild.
I too was deleting the obj folder until I had a conflict with a build script which required it. Catch-22, I used the accepted answer on the following SO link to move the location of the Obj folder to C:\Temp\BUILD. You have to do it per csproj file, but it is a great solution.
Here is the link: VisualStudio: How to save the obj folder somewhere else
Note that I am using a variable for the project name.
R:\Temp\Build\Debug\$(MSBuildProjectName)
I have the above line in both debug and release sections for all my projects, including class projects. My build path is a ram drive for speed. See this SO for more info: How to access macro variables within csproj file?
I just answered a similar question here. To recap, I ran into this problem in one of our MVC projects, and it was due to having the MvcBuildViews property in the project file set to true. Setting the property to false fixed the problem.
<MvcBuildViews>false</MvcBuildViews>
I also found this answer which outlines an alternative that does not require turning off view building.
I don't know that there is an "official" fix as it just seemed to start on multiple projects of mine for no reason that I can find in Visual Studio Premium 2012 (never happened in previous versions of VS).
As a work around to automate the deletion of the obj directory as others have said, similar to an answer by user Casual in this post VisualStudio: How to save the obj folder somewhere else, where unfortunately just moving the location of the obj folder didn't always seem to work.
Instead I added a few commands under Build Events in the Pre-build event command line:
rd "$(ProjectDir)obj" /S /Q
md "$(ProjectDir)obj"
md "$(ProjectDir)obj\Debug"
md "$(ProjectDir)obj\Release"
You can change/add/remove subfolders to match your custom build configurations using the line where buildConfigName matches the name of the build configuration you are using:
md "$(ProjectDir)obj\buildConfigName"
Hope this helps!
That error indicates that you are trying to something specific to an application at an IIS tree level that isn't defined as an application. For example if you try to do app-level functions in a web.config in a virtual directory, you will get that error. You need to find the path you are deploying to and make sure that it is defined in IIS as an application vs a folder or vdir.
Cleaning the solution (Right click Solution in VS, clean), worked for me.
I had the same error but with a deployed page.. Then realized my webserver's clock was set back to 2010 for some reason. set it to the correct date fix my problem
Clean your project
Remove the /obj folder (probably using publish and deploy? - there is a bug in it)
Althoug the problem is explained and solved in one way in the accepted answer, I wanted to show a solution which can be better for other cases. This solution has been included in some version of VS, but I can only say that I had the problem in VS 2013 Update 5. (See the "Beware" below, it could be fixed in this version, but not working only in my particular case).
I borrowed the soltuion from Error: allowDefinition='MachineToApplication' beyond application level on Visual Studio Connect.
The solution consist in including these lines to the web application project (.csproj file) which handle the deletion of the offedning intermediate files (which wans't a solution for the accepted answer, as he needed those intermediate files):
<!--Deal with http://connect.microsoft.com/VisualStudio/feedback/details/779737/error-allowdefinition-machinetoapplication-beyond-application-level,
we will need to clean up our temp folder before MVC project starts the pre-compile-->
<PropertyGroup>
<_EnableCleanOnBuildForMvcViews Condition=" '$(_EnableCleanOnBuildForMvcViews)'=='' ">true</_EnableCleanOnBuildForMvcViews>
</PropertyGroup>
<Target Name="CleanupForBuildMvcViews" Condition=" '$(_EnableCleanOnBuildForMvcViews)'=='true' and '$(MVCBuildViews)'=='true' " BeforeTargets="MvcBuildViews">
<ItemGroup>
<_PublishTempFolderNamesToCleanup Include="Database;TransformWebConfig;CSAutoParameterize;InsertAdditionalCS;ProfileTransformWebConfig;Package;AspnetCompileMerge" />
</ItemGroup>
<!--Force msbuild to expand all the wildcard characters so to get real file paths-->
<CreateItem Include="#(_PublishTempFolderNamesToCleanup->'$(BaseIntermediateOutputPath)**\%(identity)\**\*')">
<Output TaskParameter="Include" ItemName="_EvaluatedPublishTempFolderNamesToCleanup" />
</CreateItem>
<Delete Files="#(_EvaluatedPublishTempFolderNamesToCleanup)" />
</Target>
Beware: for some reason, probably because I included it myself in the project, my build target for building the views was named "BuildViews", instead of "MvcBuildViews", so I had to modify the BeforeTargets attribute accordingly.
This is not necessarily the exact same issue, and to be honest, probably down to pure lack of knowledge on my part, however I had this same error when:
I set up a standard asp.net new project actually just used for HTML5 stuff so nothing other than the usual project structure
I then (not thinking perhaps!) added a new WCF REST project (which actually was just another base asp.net project using very good examples from http://www.codeproject.com/Articles/128478/Consuming-WCF-REST-Services-Using-jQuery-AJAX-Call?fid=1597004&df=90&mpp=25&noise=3&prof=False&sort=Position&view=Quick&fr=26#xx0xx and http://geekswithblogs.net/michelotti/archive/2010/08/21/restful-wcf-services-with-no-svc-file-and-no-config.aspx
The problem was I added the WCF REST project (#2) as a SUB-DIRECTORY of the main project (#1) and then tried to build! even if I cleaned the project of course.. I also made both projects use IISexpress because I thought there was an issue using the same port or something.
Of course the build process saw the web.config from #1 and then a sub-dir with another web.config #2..
I realise this probably should be a very basic understood gotcha and it has caught me out a while ago, however sometimes it's the simplest of mistakes that are a real pain!
Might help others... who perhaps haven't had their morning coffee..
tip 1: clean & then rebuild.
tip 2: just close VS and open again.
tip 3: the downloaded project may be inside another sub folder... open the folder which has you .net files.
c:/demo1/demo/ (all files)
You should have to open demo from vs... not demo1.
I have a somewhat a similar problem, i had the main config as Copy Always so it copied the config to the bin directory. When i republished the main project, i got the MachineToApplication error. So my solution was to just change the config to Do Not Copy and remove the extra configuration in the bin folder.
I'm fighting with the InstallerDefinition.dslsetup file in a DSL setup project. I'm getting the following error:
Running transformation: The setup project could not retrieve the output path for project 'PsiTraffic.Modeling.PomModel.Dsl' from the environment. Ensure that this project exists in the solution. Only Visual C# and Visual Basic project types are supported.
The Project 'PsiTraffic.Modeling.PomModel.Dsl' is in the solution, its also a project reference of the setup solution. The project is C# so the only two pointer's it gave me are useless.
This is the section that it is reffering to in the dslsetup file:
<dslSchemas>
<dslSchema project="PsiTraffic.Modeling.PomModel.Dsl" filePath="GeneratedCode\PomModelSchema.xsd"/>
</dslSchemas>
If I provide a full path to the file the error goes away but this goes against the whole point of the project attribute, and I get errors later from the supportingAssembly attributes.
There aren't very many good examples on this and its Visual Studio doesn't provide you with much in the way of support to diagnose the problem.
Any insights or good examples would be appreciated.
It turns out that the problem was down to using solution folders and not having all the projects on the same directory level. This is a truly hideous "feature" as far as I'm concerned, and its really bad that as far as I can see its not documented.
So if you encounter similar problems make sure you're not using subfolders or solution folders.