I am struggling to work out how to set-up a WCF-WebHttp send port in BizTalk 2013 with a dynamic REST URI. Does anyone know the correct combination of Address URI and Http Method/URL Mapping in the endpoint settings?
The correct destination URI (that works when calling it with Postman etc) needs to be of the form:
http://servername/NYCC.Portal/resources/serviceinstance/case/{caseIDhere}/status/ServiceFulfilled
This is the form I am trying in the send port (that uses the new message variables), but I am getting a 404 on this:
Send Port Config
Please refer below link it might be helpful.
http://soa-thoughts.blogspot.com/2013/03/biztalk-server-2013-new-adapters-series.html
You will need to use below in URI http://servername/NYCC.Portal/resources/serviceinstance
and below in Http mthod and URL mapping
case/{caseIDhere}/status/ServiceFulfilled
Then do the value mappin for CaseIDhere
Related
I'm trying to use nginx to serve a custom error page using the Error Page middleware so that 404 requests to a lambda service (which I don't control) can be handled with a custom error page. I want to be able to get the context of this original request on that error page, either in Nginx for further forwarding, or else as a header for further handling e.g. in PHP or whatnot so I can provide contextual links on the 404 page.
However, right now after the redirection to Nginx in Traefik's ErrorPage middleware it seems the request has lost all the headers and data from the original service query.
The relevant part of my dockerfile:
traefik.port=8080
traefik.protocol=http
traefik.docker.network=proxy
traefik.frontend.rule=PathPrefix:/myservice;ReplacePathRegex:^/myservice/(.*) /newprefix/$$1
traefik.frontend.errors.myservice.status=404
traefik.frontend.errors.myservice.service=nginx
traefik.frontend.errors.myservice.query=/myservice-{status}
Nginx receives the forwarded 404 request, but the request URI comes through as nothing more than the path /myservice-404 specified in query (or /, if I omit traefik.frontend.errors.myservice.query). After the ReplacePathRegex I have the path of the original request available in the HTTP_X_REPLACED_PATH header, but any query arguments are no longer accessible in any header, and nginx can't see anything else about the original URI. For example, if I requested mysite.com/myservice/some/subpath?with=parameters, the HTTP_X_REPLACED_PATH header will show /myservice/some/subpath but not include the parameters.
Is it possible in Traefik to pass another service the complete context about the original request?
What I'm really looking for is something like try_files, where I could say "if this traefik request fails, try this other path instead", but I'd settle for being able to access the original, full request arguments within the handling backend server. If there was a way to send Nginx a request with the full path and query received by Traefik, that would be ideal.
tl;dr:
I am routing a request to a specific service in Traefik
If that request 404s, I want to be able to pass that request to Nginx for further processing / a contextual error page
I want Nginx and/or the page which receives the ErrorPage redirect to be able to know about the request that 404'd in the service
Unfortunately this is not possible with Traefik. I tried to achieve something similar but I realized that the only information that we are able to pass to the error page is the HTTP code, that's it.
The only options available are mentioned in their docs: https://doc.traefik.io/traefik/middlewares/errorpages/
I make api testing for website by using jmeter and there is error message so i want solution for this problem where i put the base url, path, and write the parameters then choose linster >>view tree result
so this image included my error message
It looks like you put the whole URL into "Server Name or IP" field like:
which is wrong as you cannot have anything but IP address or DNS hostname in the "Server Name or IP" field, so you need to split your URL like:
or put everything into "Path" field like:
Also don't forget to add HTTP Header Manager and configure it to send at least relevant Content-Type header.
More information: Testing SOAP/REST Web Services Using JMeter
i knew my mistake you should put every part of url in it's place so there is port field and i put the number of port in the field of url so when i divided it , it works successfully
so this image show that
you should separate port number on server id to work successfully
where there are specific places for each part of url
https://medium.com/#chamikakasun/rest-api-load-testing-with-apache-jmeter-a4d25ea2b7b6
I need to download a file from an http location to my local system using apache camel. When I gave the below code
from("http://url/filename.xml")
.to("file://C:location")
it has worked for ftp but not working when the url is "http". That is, it is not downloading the file from the http location to the local address provided in the "to()".
This should work.
from("direct:abc")
.setHeader("Accept", simple("application/xml"))//Change it according to the file content
.setHeader(Exchange.HTTP_METHOD, constant("GET"))
.to("http://url/filename.xml")
.to("file:///tmp/?fileName=yourFileName.xml");
You cannot use from("Some url"). Above route is triggered whenever there is a message on direct:abc endpoint. You can change the yourFileName.xml to whatever filename you want it to be stored as.
Instead of a trigger from route, you can as well use a timer or any other means of self triggering.
The reason you cannot consume from a rest enpoint like this
from("http://url/filename.xml")
is you cannot consume from http endpoint. So there needs to be a trigger. Infact the exception message is pretty clear when you do like this. It says
org.apache.camel.spring.boot.CamelSpringBootInitializationException: org.apache.camel.FailedToCreateRouteException: Failed to create route route1: Route(route1)[[From[http://url/filename.xml]] -> [To[... because of Cannot consume from http endpoint
the http component cannot be used as a consumer ie. you cannot have a route as from("http://...")
you need to use a consumer component that will start the route.
You could try something like this
from("timer:foo?fixedRate=true&period=5000")
.to("http://url/filename.xml")
.to("file://C:location")
I'm working with an API which provides a HTTP header called token with value 12abc3 and my url is https://example.com/view/quote. Is there a way by which I can add the header as a parameter in the url so that I can type it directly on my browser's address bar instead of using cURL orHurl.it??
The only way I can imagine being able to do this would be to write a small HTTP proxy that takes a specially formatted URL and extracts header values out of the URL and re-issues the request for you. I'm not aware of any service to do this automatically for you.
I think it's too late to reply but for those who still finding the solution
you can send your token through url like this
https://yoururl?Authorization=Bearer yourtokenhere
Is it possible to send a jsonp-Request from domain http://www.a.com (not under my control) to domain www.b.com (under my control) through https? If so, are the parameter values in the GET-Request encrypted or do they be logged in access-logs in plain text?
I'm searching a secure way to do cross domain request. Unfortunately POST-Statements through CORS requests / SSL doesn't work with Internet Explorer. It doesn't support setting cookies by Access-Control-Allow-Credentials. Is there another way to achieve this goal?
For the second part of the question , HTTPS will only encrypt the channel the request uses to transfer the data. Once it arrives at the web server all the request params will be logged in your access log in plain text.
You would need to use a POST request to prevent the data being written to the access log. However you cant use JSONP over a POST request (not possible to send a POST request using a tag).