In the Keymap configuration section, there's a checkbox labeled: German layout support. What does it actually do?
The documentation simply states:
This check box appears when a non-English keyboard layout has been detected. When you type any character in the editor, the keyboard layout is recognized and a notification appears.
But that doesn't explain what the effect of the feature is. I experimented with both states of the checkbox, but I couldn't figure out any differences whatsoever.
This option enables support for certain hotkeys with "de", "fr", "it" and "uk" layouts. Without it some combinations will not work (like AltGr+7 to type "[" with German keyboard).
Related issue: https://youtrack.jetbrains.com/issue/IDEA-142462.
I just foolishly activated this checkbox without knowing what it does, and it seems to reinterpret my keyboard as English layout (y becomes z, shift+8 is a '*' instead of '(' etc). Sounds banal so far, but what this egregiously also does is remove the checkbox because clearly your keyboard is English now - i.e. I cannot deactivate this feature from inside the program.
https://www.jetbrains.com/help/idea/2017.1/configuring-keyboard-shortcuts.html?search=caret here they have the path to the address for the relevant config file (keyboard.xml) that I had to manually reset, just in case anyone else ever runs into this problem.
Related
I'm editting a .tsx-file and are reaching upon this bonkers file-formatting:
... If I enlarge the window a bit, then it makes more sense:
But I would still like to change it, so value and onClick aren't aligned all that way to the right. Ideally, it would try to align them with the opening bracket (as they do), unless the opening bracket is more than 35 characters, from the line start. Or something like that.
Now, I assume that it's the TypeScript-formatting that dictates the Code Style for a .tsx-file. But when I open the settings: Editor >> Code Style >> TypeScript then there are BAZILLIONS of settings.
Which leads me to three questions:
Does anyone know what I need to change, so object-attributes doesn't follow the opening-brackets width?
Could I find the name of what I'm looking for, in some smart way? I tried hovering over the massive space, hoping that the little yellow light-bulb could shine some light on, what I was after.
Are there any presets, to be found somewhere? So I don't need to engineer a new Code Style, if I dislike the default.
Make sure that the following option is disabled:
Settings (Preferences on macOS)
Editor | Code Style | TypeScript | Wrapping and Braces
Function call arguments: Align when multiline
NOTE: It is possible that the default value has been changed somewhere since the previous version as I have seen a few questions for the same option but different language (PHP and JavaScript).
HINT 1: Did you know that you can paste your own code in the preview area and start changing options to see how they will affect it? It helps locating the right option a lot.
HINT 2: There is a special popup that shows formatting rules applied to the code. It does not show all possible options but can give you a hint what to look for. To invoke it:
Use Help | Find Action... (or Action tab on Search Everywhere -- they use to be different popups but are using the same popup nowadays)
Type adjust to filer actions
Select and invoke "Adjust code style settings" action
It will give you a popup with applicable rules (it's a limited set: may not list all).
An example for PHP code:
When I start IntelliJ IDEA, that message comes up, but I couldn't find any information about that feature and how it could help me.
Enable smart keyboard internalization for IDEA.: We have found out that you are using a non-english keyboard layout.
You can enable smart layout support for German language.You can change this option in the settings of IDEA more...
This dialog has been introduced on Github as fix for IDEA-63779.
It fixes certain keyboard shortcut clashes with non-english keyboard layouts. Cited from IntelliJ support:
This option enables support for certain hotkeys with "de", "fr", "it" and "uk" layouts. Without it some combinations will not work (like AltGr+7 to type "[" with German keyboard).
There are corresponding Linux and Windows issues as well.
I'm having a weird problem in pycharm that I can't seem to work out.
Using the Darcula theme, I'm seeing some odd highlighting as seen in the below image
Any idea what it is? I'm thinking I must have accidentally turned on some obscure tool, but I can't spot any rhyme or reason.
For whatever reason / somehow you have injected custom language (HTML?) into DIV (?) tags (the green background).
Settings (Preferences on Mac) | Editor | Language Injections -- find and delete offending rule. It should have "Project" or "Global" in most right column (Scope) -- do not touch "Bundled" ones.
Alternatively -- Alt + Enter while having caret inside problematic place and choose "Uninject xxx" from popup menu. This will only disable that rule (which is still enough to make it work as before) .. but you better delete such wrong rule at some point later.
PHPStorm has a vertical line on what they call the "right margin" which is set by default to 120 characters or columns...
Given that PSR standards state There MUST NOT be a hard limit on line length; the soft limit MUST be 120 characters; lines SHOULD be 80 characters or less., it'd be nice if I could get another visual indicator at the 80 character mark...
I'm well aware that it says what line/column you're on in the status bar, but I typically hide most panels (status bar included) while coding.
Therefore, is there a way (feature or plugin) that would allow me to add a 2nd vertical line to indicate the 80th column?
It is not currently possible .. and no plugin comes into my mind.
https://youtrack.jetbrains.com/issue/IDEA-99875 -- star/vote/comment to get notified on progress.
P.S. Considering that this is rather PHP/Python specific (other languages do not care about this) .. I would not expect JB to have it implemented in nearest future...
I suggest the following workaround, it works for me on PhpStorm 9.0:
Open Settings page (usually Ctrl+Alt+S), go to Plugins -> Browse Repositories
Find and install BackgroundImage plugin
Restart IDE, it may output an error, something like "unknown protocol d" - don't worry, go forth
Make an image with height=1px, and width=(desired width of additional margin). Give it, say, white background and paint one rightmost pixel to say, black. I took a screenshot of an editor and cropped it in PS, to avoid annoying search and adjustment of the image width. Every change of background image requires to restart PhpStorm.
Open Settings again, goto Other settings -> BackgroundImage
Set Enabled checkbox, browse your created image, and check the FileSystem radio button
Restart IDE again and change the margin and you will get two margins
The image is left-aligned, so when you resize an editor on x-axis (move the splitter between Editor and Project View or File System View, etc.), the margin will remain truthy.
Some side-effects - it appears also on console window, event log, perhaps somewhere else.
If the plugin doesn't work, check out this page (there said that most JetBrains plugins should work on all products on IntelliJ Platform, and some workaround if they does not): http://www.jetbrains.org/intellij/sdk/docs/basics/getting_started/plugin_compatibility.html
ADDED: Doesn't work with scaling an editor (Ctrl + MouseWheel) - the scale of the image (fake margin), remains the same and the margin becomes not truthy.
In the latest PHPStorm, this is now possible. This would be PHPStorm 2017.3. The instructions on the ticket mentioned in the accepted answer explains it quite well:
Will be available in the next EAP build. You can set it up at
Settings|Editor|Code Style|Visual guides for all languages or on
"Wrapping and Braces" tab for a specific language ("Other" tab for
XML/HTML). You can change the visual indent guide color at
Settings|Editor|Color Scheme|General|Guides|Visual guides. Please
submit separate reports if you find any problems.
I personally found the setting in Settings|Editor|Code Style|PHP|Wrapping and Braces|Visual guides. It should be there for every language.
In IntelliJ 12, how do I make the popup stop...popping up when I hold Ctrl while hovering over a field/method with the mouse? (see picture)
That is the "Brief Info" action (or at least that is what it is called in the Keymap reference.) To the best of my knowledge (i.e. 10+ years of daily IDEA use including all beta/EAP builds), there is no way to turn it off. Searching the settings for either "Brief Info" or "Info" does not show any pertinent setting. Likewise, searching key mappings for the same does not reveal a mapping. In fact in the keymap settings, you can only map mouse clicks, not mouse pointing (i.e. hovering). You can submit a feature request asking for a setting to disable this feature.
Just put of curiosity, why do you want to disable it? I guess I would never see a case where one would Ctrl+MousePoint unless they wanted to see this. The only case I can think of would be if you disliked it popping up when you go to Ctrl+Click on a symbol. If it is the latter, note that you can use Ctrl+B in place of Ctrl+MousePoint
Try turning off the "autopop" options under /Settings/IDE Settings/Editor/Code Completion.