Why does nvm is added before /home/user/.rvm/gems/ruby-2.2.3/bin
in PATH ?
echo $PATH
/home/user/.rvm/bin:/home/user/.nvm/versions/node/v5.1.0/bin:/home/user/.rvm/gems/ruby-2.2.3/bin:/home/user/.rvm/gems/ruby-2.2.3#global/bin:/home/user/.rvm/rubies/ruby-2.2.3/bin:/home/user/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/user/.rvm/bin
My .zshrc file end looks like this
export NVM_DIR="/home/user/.nvm"
[[ -s "$NVM_DIR/nvm.sh" ]] && . "$NVM_DIR/nvm.sh" # This loads nvm
export PATH="$HOME/.rvm/bin:$PATH" # Add RVM to PATH for scripting
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # Load RVM into a shell session *as a function*
I get the following error because of that.
rvm -v
Warning! PATH is not properly set up, '/home/user/.rvm/gems/ruby-2.2.3/bin' is not at first place,
usually this is caused by shell initialization files - check them for 'PATH=...' entries,
it might also help to re-add RVM to your dotfiles: 'rvm get stable --auto-dotfiles',
to fix temporarily in this shell session run: 'rvm use ruby-2.2.3'.
rvm 1.26.11 (master) by Wayne E. Seguin <wayneeseguin#gmail.com>, Michal Papis <mpapis#gmail.com> [https://rvm.io/]
rvm is expecting to be the first in your PATH. You can disable this warning so that you do not have this issue by adding the following line to your .rvmrc file:
rvm_silence_path_mismatch_check_flag=1
This should disable that warning.
Your .rvmrc file should be located at: ~/.rvmrc. Create it if it does not exist.
Now, make nvm the first in your PATH and place rvm after that.
Related
In the system there is a nodejs, installed through nvm. The command is not running npm.
Console is Oh my zsh
You can use zsh-nvm or enable it yourself by adding following lines to your ~/.zshrc
export NVM_DIR=~/.nvm
[ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh"
Extra:
For faster shell initialization, I use lazynvm which only loads node when needed
lazynvm() {
unset -f nvm node npm
export NVM_DIR=~/.nvm
[ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh" # This loads nvm
}
nvm() {
lazynvm
nvm $#
}
node() {
lazynvm
node $#
}
npm() {
lazynvm
npm $#
}
Reference: Lazy load nvm for faster shell start
Switching from Bash to Oh-My-Zsh
If you already have nvm installed and you're switching from bash to oh-my-zsh you can simply open up your .zshrc file and add the nvm plugin that is included with oh-my-zsh:
Open your zsh config file.zshrc in nano with this command: nano ~/.zshrc
Scroll down to where it shows plugins=(git) and add nvm inside the parentheses to make it show as plugins=(git nvm) (separate plugins with spaces)
Press control + O (on macOS), then enter, to save, then press control + X to exit
Then open a new terminal window/tab and enter nvm ls to confirm it works. Note that you must open a new window/tab for your shell to use the newly updated .zshrc config (or enter source ~/.zshrc, etc.)
Source: https://github.com/robbyrussell/oh-my-zsh/tree/master/plugins/nvm
This worked for me on Ubuntu 20.04.
Install or update nvm
wget -qO- https://raw.githubusercontent.com/nvm-sh/nvm/v0.37.2/install.sh | bash
Add in your ~/.zshrc
echo 'export NVM_DIR=~/.nvm' >> ~/.zshrc
echo '[ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh"' >> ~/.zshrc
Load in the current shell environment
source ~/.zshrc
Check the nvm version
nvm -v
use homebrew to install nvm
brew install nvm
edit your system configuration
vim ~/.zshrc # or vim ~/.bashrc
export NVM_DIR=~/.nvm
esc > :wq
save file
reload the configuration
source $(brew --prefix nvm)/nvm.sh
view nvm version
$ nvm --version
# 0.36.0
enjoy it.
A much easier solution is to use the nvm plugin that is shipped by default:
It also automatically sources nvm, so you don't need to do it manually
in your .zshrc
git clone https://github.com/nvm-sh/nvm.git ~/.nvm
cd ~/.nvm && git checkout v0.35.1 (current latest release)
Add nvm to your ~/.zshrc. Ex: plugins=(... nvm)
I discovered that there is a nvm plug-in shipping with oh-my-zsh (that's different from lukechilds plugin). After short inspection, I think it adds the necessary modifications to .zshrc when loading, so simply adding nvm to the plugins list in .zshrc should work as well (and it does for me).
I did not find any more details on that default nvm plugin via google so I don't know whether this is the "go-to" solution.
Add this code to .zshrc on your user directory
export NVM_DIR="$HOME/.nvm"
[ -s "/usr/local/opt/nvm/nvm.sh" ] && . "/usr/local/opt/nvm/nvm.sh" # This loads nvm
[ -s "/usr/local/opt/nvm/etc/bash_completion.d/nvm" ] && . "/usr/local/opt/nvm/etc/bash_completion.d/nvm" # This loads nvm bash_completion
Then run this code on your terminal:
source ~/.zshrc
With Linux (Ubuntu 20.04, 22.04 and 22.10)
With your favorite editor, you edit ~/.zshrc
nano or vi ~/.zshrc
At the end of the file, you add :
# NVM
export NVM_DIR=~/.nvm
[ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh"
And then you run :
source ~/.zshrc
I strongly suggest using christophemarois' approach to lazy loading nvm (node, npm and global packages) in order to avoid slow shell starting times:
# Add every binary that requires nvm, npm or node to run to an array of node globals
NODE_GLOBALS=(`find ~/.nvm/versions/node -maxdepth 3 -type l -wholename '*/bin/*' | xargs -n1 basename | sort | uniq`)
NODE_GLOBALS+=("node")
NODE_GLOBALS+=("nvm")
# Lazy-loading nvm + npm on node globals call
load_nvm () {
export NVM_DIR=~/.nvm
[ -s "$(brew --prefix nvm)/nvm.sh" ] && . "$(brew --prefix nvm)/nvm.sh"
}
# Making node global trigger the lazy loading
for cmd in "${NODE_GLOBALS[#]}"; do
eval "${cmd}(){ unset -f ${NODE_GLOBALS}; load_nvm; ${cmd} \$# }"
done
My rvm is not working, probably due to an error. When I open new console, it says:
-bash: /Users/amorfis/.rvm/scripts/cd: line 14: syntax error near unexpected token `('
-bash: /Users/amorfis/.rvm/scripts/cd: line 14: ` cd() { __zsh_like_cd cd "$#" ; }'
It's hard to say where the script .rvm/scripts/cd is called. When I remove this line from ~/.bash_profile:
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # Load RVM into a shell session *as a function*
there is no error. But when I issue source $HOME/.rvm/scripts/rvm... still there is no error.
My system is Mac OS X 10.9.4
rvm --version:
rvm 1.25.29 (stable) by Wayne E. Seguin <wayneeseguin#gmail.com>, Michal Papis <mpapis#gmail.com> [https://rvm.io/]
UPDATE
Other scripts in ~/.rvm/scripts:
alias
aliases
autolibs
base
cd
cleanup
cli
completion
cron
db
disk-usage
docs
env
extras
fetch
fix-permissions
functions
gemsets
group
hash
help
hook
info
initialize
install
irbrc
irbrc.rb
list
maglev
manage
migrate
monitor
mount
notes
osx-ssl-certs
override_gem
patches
pkg
prepare
repair
requirements
rtfm
rubygems
rvm
set
snapshot
tools
upgrade
version
wrapper
zsh
My ~/.bash_profile looks like this:
#...not important stuff
source ~/.bashrc
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # Load RVM into a shell session *as a function*
And in my ~/.bashrc I have this line (and few others):
[ -s "/Users/amorfis/.scm_breeze/scm_breeze.sh" ] && source "/Users/amorfis/.scm_breeze/scm_breeze.sh"
When I remove this line, the error is also gone. And again, it still doesn't show when I run source ~/.scm_breeze/scm_breeze.sh
Scm breeze is installed from here: https://github.com/ndbroadbent/scm_breeze
In source ~/.scm_breeze/scm_breeze.sh there is such piece of code:
if ! type ruby > /dev/null 2>&1; then
echo "Now in if"
# If Ruby is not installed, fall back to the
# slower bash/zsh implementation of 'git_status_shortcuts'
source "$scmbDir/lib/git/fallback/status_shortcuts_shell.sh"
fi
I expected the "if" statement is the problem. So I did this. Added such code before the if:
echo "Now lets try"
if ! type ruby > /dev/null 2>&1; then
echo "trying"
fi
echo "tried"
and inside if, as the first line in the block:
echo "Now in if"
This was the output:
Now lets try
tried
-bash: /Users/amorfis/.rvm/scripts/cd: line 14: syntax error near unexpected token `('
-bash: /Users/amorfis/.rvm/scripts/cd: line 14: ` cd() { __zsh_like_cd cd "$#" ; }'
So it looks like scm_breeze.sh is ok. The problem must be in .rvm, but only when scm_breeze.sh is run.
UPDATE 2:
The beginning of the .rvm/scripts/cd script looks like this:
#!/usr/bin/env bash
# Source a .rvmrc file in a directory after changing to it, if it exists. To
# disable this feature, set rvm_project_rvmrc=0 in /etc/rvmrc or $HOME/.rvmrc
case "${rvm_project_rvmrc:-1}" in
1|cd)
# clonned from git#github.com:mpapis/bash_zsh_support.git
source "$rvm_scripts_path/extras/bash_zsh_support/chpwd/function.sh"
# not using default loadign to support older Zsh
[[ -n "${ZSH_VERSION:-}" ]] &&
__rvm_version_compare "$ZSH_VERSION" -gt 4.3.4 ||
{
cd() { __zsh_like_cd cd "$#" ; }
popd() { __zsh_like_cd popd "$#" ; }
pushd() { __zsh_like_cd pushd "$#" ; }
}
I'd add this in as a comment, but I don't have the reputation to do so. I tried the answer from blob, but it didn't work.
I don't see the "scm_breeze-line", that Riaan Burger was talking about. Has anyone figured out an answer to this?
My error is pretty much the same:
/Users/myusername/.rvm/scripts/cd:14: defining function based on alias `cd' [ruby-2.3.3]
/Users/myusername/.rvm/scripts/cd:14: parse error near `()'
and line #14 says the same:
11 [[ -n "${ZSH_VERSION:-}" ]] &&
12 __rvm_version_compare "$ZSH_VERSION" -gt 4.3.4 ||
13 {
14 cd() { __zsh_like_cd cd "$#" ; }
15 popd() { __zsh_like_cd popd "$#" ; }
16 pushd() { __zsh_like_cd pushd "$#" ; }
17 }
I just ran into the same problem. The solution was to ensure the scm_breeze line executes after all the rvm ones.
Hit the same problem today, but the problem had nothing to do with scm_breeze in my case. If anyone stumbled onto this answer from google or some other place, maybe it'll help you.
Shortly after switching to OSX from Win7 I've been happily modifying anything and everything without necessarily understanding what I'm doing. Amongst other things, I've edited .bashrc as root (not the one from profile, rather the one located in /etc/.bashrc) and aliased cd like that:
alias cd='cd -P'
Never had problems with it before installing RVM, so if you were as root-happy as I once was, it might be worth checking whether you left yourself such a gift in the past.
I've moved said line into ~/.bash_profile and since then RVM happily runs without errors.
So basically what I did,
Step 1) Get a clone from SCM_BREEZE :-
git clone https://github.com/scmbreeze/scm_breeze.git
Step 2) Get a reference from Author's Doc (Link for Docs) and wrote few commands inside my local git repository's terminal,
. "$HOME/.scm_breeze/scm_breeze.sh"
update_scm_breeze
gs
It will update you scm breeze from github and patch your files if any
Your Git Status Command
N you are good to go...
Hope so it would help you now :)
I'm using zsh in OSX with rvm, but it doesn't load the default ruby at login:
in my .zshrc I have
source $ZSH/oh-my-zsh.sh
[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm"
I've tried to swap those two lines, but still it doesn't work..
(of course in bash it works..)
The issue is that OMZ generated ~/.zshrc with hardcoded PATH, this makes the shell overwrite it every time this file is read.
There is also a bug in ZSH or some mysterious power that makes ZSH read ~/.zshrc after ~/.zprofile - this leads to resetting PATH.
Just comment out the PATH=... line in ~/.zshrc and it should work.
As for the mentioned error - it is supposed to be fixed already, update RVM - rvm get head - and open a new terminal ... if it still appears - open a new issue for RVM.
I'm having a hard time getting rvm to install on Mint. I tried the instructions at:
https://rvm.beginrescueend.com/rvm/install/
The first step proceeds without incident. However, when I try to run source ~/.bash_profile, I get an error message stating that no such directory exists. I can restart the terminal, but it still says that "The program 'rvm' is currently not installed...."
A .rvm directory in now present in my home directory and the binary is there. I'm suspecting that this means that I need to add something in my .bashrc (or somewhere else) to tell the OS where to look for executables. But I'm still a little new at Linux and am uncertain where exactly it needs to go or what it should be.
The Answer in the same site:
echo '[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm" # Load RVM function' >> ~/.bash_profile
it works for me.
[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm" # Load RVM function
Looks like this needs to be tacked onto the end of the .bashrc file if it isn't present.
I am having trouble with using rvm use in zsh. Whenever I do rvm use 1.9.2 or other ruby version, it gives confirmation as Using /home/kxhitiz/.rvm/gems/ruby-1.9.2-p290
But when I do rvm list ruby 1.9.2 is not selected. This works fine in bash. That means I can go to bash and select ruby version I need, and I can come back to zsh to use it.
So that means if I have to change ruby from list of rubies I have installed, I have to go to bash to select it and once selected in bash, I can see it selected in zsh as well.
Any solution would be highly appreciated.
Ok, I did fixed it by adding following line at the end of my ~/.zshrc file
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # Load RVM into a shell session *as a function*
Cheers!