I am coding a custom module that is executed inside a pillar (to set a pillar variable) but I need it to retrieve an external parameter.
The idea is to retrieve a parameter from the master server. For example, if I execute
salt 'myminion' state.highstate
the custom module will be called and it should retrieve a parameter to generate the pillar.
I was looking into options like:
Using environment variables: It doesn't work as it seems that the execution modules does nothave access to the shell environment of the salt command.
Using command line paramenters: I dont know if it is even possible as I couldn't find any documentation.
Using an additional pillar in the command line: It doesn't work as the execution module is executed during pillar evaluation so it does not have access to __pillar__ or __salt__['pillar.get'] (both empty).
Reading from stdin: Does not workfrom a custom module.
Using a file to read info: I didn't even tryied this because it is not an option for me for security reasons. I dont want the information stored.
Any ideas if or how is this possible to do?
Thanks a lot!
By:
a custom module that is executed inside a pillar (to set a pillar variable)
do you mean an external pillar?
If so, passing it parameters is covered in that document:
You can pass a single argument, a list of arguments or a dictionary of arguments to your pillar:
ext_pillar:
- example_a: some argument
- example_b:
- argumentA
- argumentB
- example_c:
keyA: valueA
keyB: valueB
External pillars merge their data into the pillar dictionary, and are "custom modules", so I think that would fit your case.
If that's not what you're trying to do, can you update the question? Where is this parameter coming from? Is it different depending on the minion (minion_id is always passed to an external pillar)?
(edit) Adding a couple links about safely storing secrets:
using vault
dotgpg
blackbox
Related
In UVM, there are pre-defined verbosity levels:
UVM_DEBUG
UVM_FULL
UVM_HIGH
UVM_MEDIUM
UVM_LOW
UVM_NONE
Actual reporting can be controlled using command line argument, e.g. +UVM_VERBOSITY=UVM_LOW
(1) Is there a way to have user-defined verbosity levels (or at least
aliases)?
Like e.g. "UVM_INFO" with same priority as UVM_NONE
(2) Is it possible to create completely user-defined verbosity level, with different priority ?
Say something between UVM_NONE and UVM_LOW
And, how to control such thing from CLI ??
Reason for this is that even with UVM_LOW some commercial VIP is still rather verbose. If possible, I would like to have a "level of my own" for some testbench elements...
I have an idea for uvm-1.2 version so I can tell in that context. Yes, you can set the custom verbosity. You can create an object of uvm_report_object and call the set_report_verbosity_level to set the verbosity of your choice.
For example a small testcase would look like -
module top;
import uvm_pkg::*;
uvm_report_object rep_obj;
initial begin;
rep_obj = new("");
rep_obj.set_report_verbosity_level(350);
rep_obj.uvm_report_info("", "", 350);
end
endmodule
"set_report_verbosity_level" will set the verbosity_level of uvm_report_handler class to 350 for that particular uvm_report_object. "set_report_info" is now being called with verbosity of 350 which otherwise takes UVM_MEDIUM as the default verbosity. In this example you don't have to add any additional command with the run commandline.
If you want to use the custom verbosity to use to prinout out new error messages, in that case you will have to create a class derived from uvm_report_object and create your own function definition for that custom message (For ex:- uvm_custom_report_info).
If you see the definitions of uvm_report_info/uvm_report_warning in your uvm_report_object class, it will give you the idea.
I hope this answers your question to some extent.
I need to set variables in root scope in one job to be used in a different job. The first job has a Javascript job entry, with the statements:
parent_job.setVariable("customers_full_path", "C:\\customers22.csv", "r");
true;
But the compilation fails with:
Couldn't compile javascript:
org.mozilla.javascript.EvaluatorException: Can't find method
org.pentaho.di.job.Job.setVariable(string,string,string). (#2)
How to set a variable at root level in a Javascript job entry?
Sorry for the passive agressive but:
I don't know if you are new to Pentaho but, the most common mistake for new users, with previous knowledge of programming, is to be sort of 'addicted' to know methods, as such you are using JavaScript for a functionality that is built in the tool. Both Transformations(KTR) and JOBs(KJB) have a similar step, you can better manipulate this in a KTR.
JavaScript steps slow down the flow considerably, so try to stay away from those as much as possible.
EDIT:
Reading This article, seems the only thing you're doing wrong is the actual syntax of the command..
Correct usage :
parent_job.setVariable("Desired Value", [name_of_variable]);
The command you described has 3 parameters, when it should be 2. If you have more than 1 variable you need to set, use 3 times the command. Try it out see if it works.
I added some custom properties in the 'updateAttribute' processor using the '+' button. For example: I declared a property 'DBConnectionURL' and gave the value as 'jdbc:mysql://localhost:3306/test'. Then, in the 'DBCPConnectionPool' service controller, I simple used the value'${DBConnectionURL}' for 'Database Connection URL' property. But, I manually gave the value for 'DBConnectionURL' property.I want a way where I can feed the value dynamically from a file, so that i just need to change the value in the file and the value for 'DBConnectionURL' changes dynamically based on the value present in the file. Is there a way to do it?
Rishab,
You have to use nifi variable registry.
In conf/nifi.properties, you could configure the below configuration in it for dynamically update a value in your data flow.
nifi.variable.registry.properties=./dynamic.properties
You can give your variables in that file dynamic.properties it should present in conf directory.
For an example, If dynamic.properties files contains below values
DBCPURL= jdbc://<host>:<port>
you can use that in your data flow by using ${DBCPURL}
Note: You should restart nifi services if you change any configuration in conf/nifi.properties.Otherwise your changes not worked in dataflow.
Feel free to accept it be answer if it worked for you.
I have alot of Bamboo variables defined due the fact that i have a system with alot of legacy and config at places where it does not belong. Getting rid of all this will take a bit longer on the roadmap so i need to find a way to auto replace all these values.
The number im talking about is that there are 8 customer config files with each about 100 variables. Indeed, there was a maniac who added all of those in Bamboo because as you might thought most of them are variable for each environment.
At this moment i want to automate the deployment process and all is going fine exact the fact that i need to replace 100 variables and i dont want to maintain it in my script itself all the time.
I am looking for a way to retrieve all the variables in an array so i can just iterate through all the keys and try to replace them at the config files.
echo "${bamboo.application.myvalue}" will replace the value as expected. The only problem is, how can i get all the keys under bamboo.*
I tried it with the following functions but all without success:
printenv
env
declare
All above without success. How can i retrieve a list of all those variables as inline script in Bamboo.
Thanks alot
I think it is not possible to change the value of the variables on the fly. Instead, you can use the "Inject Bamboo variables" task in order to be able to change the variable value.
This task reads a file to create the variables. So, all you have to do is to create this file with the values you need, and then use this variables.
E.g.: Creating a file from a powershell script:
$path = 'bambooVariaveis.properties'
$connectionstringX = 'connectionstring="Data Source=XXXX;"'
$Utf8NoBomEncoding = New-Object System.Text.UTF8Encoding($False)
[System.IO.File]::WriteAllLines($path, $connectionstringX, $Utf8NoBomEncoding)
E.g: Inject Bamboo Variables config
Using it (in a subsequent script task):
echo ${bamboo.inject.connectionstring}
I'm very new at JMeter issues.
In a test script i have a BeanShell PreProcessor element that updates some variables previously defined at a "User Defined Variables" element.
Latter those variables are used in "Http Requests". However, the value that is used in the http request is the default one.
The scripts seems to be working due to some debug print();
My question is if it's necessary to delay the script to be sure that the BeanShell finishes?
Thanks a lot for your attention
There is no need to put any delay to Beanshell Pre-Processor as it's being executed before request. I'd recommend to check your jmeter.log file to see if there are any scripting issues as Beanshell Pre-Processor does not report errors anywhere including View Results Tree listener.
There are at least 2 ways to assure that everything is fine with your Beanshell script:
Put your debug print code after variables replace logic to see if it fires
Use JMeter __Beahshell function right in your HTTP request. If it's ok - View Results Tree will demonstrate beanshell-generated value. If not - the field will be blank and relevant error will be displayed in the log.
Example test case:
Given following Test Plan structure:
Thread Group with 1 user and 1 loop
HTTP GET Request to google.com with path of / and parameter q
If you provide as parameter "q" following beanshell function:
${__BeanShell(System.currentTimeMillis())}
and look into View Results Tree "Request" tab you should see something like:
GET http://www.google.com/?q=1385206045832
and if you change function to something incorrect like:
${__BeanShell(Something.incorrect())}
you'll see a blank request.
The correct way of changing existing variable (or creating new if variable doesn't exist) looks like
vars.put("variablename", "variablevalue");
*Important: * JMeter Variables are Java Strings, if you're trying to set something else (date, integer, whatever) to JMeter Variable you need to cast it to String somehow.
Example:
int i = 5;
vars.put("int_i", String.valueOf(i));
Hope this helps.
You can update the vale of a "user defined variable".
You have to create a bean shell sampler
vars.put("user_defined_variable", "newvalue");
#theINtoy got it right.
http://www.blazemeter.com/blog/queen-jmeters-built-componentshow-use-beanshell
I'm new to jmeter too but as I know variables defined in "User defined variables" are constants, so you can't change them. I recommend to use "User Parameters" in preprocessors or CSV Data Set Config.