I have been trying to install openfire server(4.0.1 version) on mac OSX El Capitan (version 10.11.3) for development and testing purpose.
I also installed latest jre
I tried to run open fire from preference but always give error attached in screenshot
What is the solution to this error?
Thank you in advance.
Error Message Screenshot
I had the same issue after install OpenFire 4.0.3
1- Make sure you have JAVA 7 or higher
java -version
2- Make sure OpenFire can see your JAVA and has permissions to execute by going to console and type:
sudo su
<admin_pass>
export JAVA_HOME=$(/usr/libexec/java_home)
export PATH=$JAVA_HOME/jre/bin:$PATH
chmod -R 777 /usr/local/openfire/bin
cd /usr/local/openfire/bin
./openfire.sh
TIP: restart your machine
TIP2: the lauching logs are at: /usr/local/openfire/launchd.stderr & launchd.stdout
TIP3: check your config, like said here: https://community.igniterealtime.org/message/179404#179404
Related
I have followed these steps while installing the gnome extension of chromium in Ubuntu 20.04.
Installed the GNOME Shell integration extension on chromium.
As per their documentation ran a command to install chrome-gnome-shell
sudo apt-get install chrome-gnome-shell
Still while loading the gnome-extensions page, it is showing error that "Although GNOME Shell integration extension is running, native host connector is not detected. Refer documentation for instructions about installing connector."
Can anyone tell me how to resolve this issue in steps?
FYI: starting from Ubuntu 21.10 Firefox comes as a default browser and as a snap, as well as Chromium. And has the same problem: GNOME Shell integration shows the same error.
Other ways to install the extensions are:
gnome-extensions install --force your_downloaded_extension.zip
unzip your_downloaded_extension.zip ~/.local/share/gnome-shell/extensions/
Probably this is because you are running Chromium as a Snap. There is an open bug in Launchpad about this, that appears to still be happening in Ubuntu 20.04 (still happening in Ubuntu 22.04):
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1741074
The easiest solution would probably be to use another web browser, not in a Snap.
I experienced this issue when upgrading from Ubuntu 21.04 to Ubuntu 22.04 (Jammy Jellyfish), where Firefox was installed via snap - supposedly the sandboxing made it unable to detect.
My resolution (which brought back gnome extensions connector being seen) was to install firefox manually by debian package via the directions in https://balintreczey.hu/blog/firefox-on-ubuntu-22-04-from-deb-not-from-snap/ . You may also be able to install the direct tarball following directions in https://fostips.com/install-latest-firefox-non-esr-debian/
Another option is to use a native extension manager as suggested in https://haydenjames.io/ubuntu-22-04-install-gnome-extensions-manager-workaround/
I solved using Chrome and not more Firefox for extensions.gnome.
(I use Chrome just for manage this extension)
If you still got problems, you could simply do this:
sudo apt-get reinstall chrome-gnome-shell
For me it did work after all, but just by using another browser - Firefox
I'm using Ubuntu 20.10 and I also had this issue. I was using Chromium but I found that Chromium dropped support for this, therefore I installed Firefox from the software. This did not work either.
The fix was to uninstall Firefox from software and install Firefox from ubuntu software with the source: ubuntu-groovy-updates-main
I installed the browser extension on there and it worked perfectly.
Aevin J He gave the answer if you're on ubuntu 21.10. it really matters whom you install it from. don't use the default one, use the one with most reviews
I stuck in install weblogic on my vm solaris. i try that
java -d64 -jar fmw_12.2.1.3.0_wls.jar
and i got an error
Checking monitor: must be configured to display at least 256 colors. DISPLAY environment variable not set. Failed <<<<
Any solution for these error?
This happens if you want to do an graphical install of the system without having a X11 running. The error message is quite normal for such an situation.
You could:
Not running the installer in the graphical mode by doing a silent install (please refer to https://docs.oracle.com/cd/E24329_01/doc.1211/e24492/silent.htm#WLSIG131 for information)
Install the nescessary package to have an X11 and stuff running in your VM with pkg install solaris-desktop. Then execute the java command again from the GUI . This obviously only works if you can get a the graphical output of the VM for example via VNC or other tools.
You could set the DISPLAY variable to an installed X11 implementation. For example i use Xquartz on my Apple notebook. Then configure DISPLAY and XAUTHORITY correctly. Or you could simply log into the Solaris system with ssh -X . I prefer the second one, as it does everything automatically.
I'm new to webOS SDK. Downloaded the installer and after i finished installation couldn't launch IDE.
I also tried to install from offline package. But still same.
Keep freezing at this screen.
MacOS 10.12.6
java version "1.8.0_131"
You must run with sudo. Try run with command like this
sudo /Users/USER/webOS_TV_SDK/IDE/WebOSIDE.app/Contents/MacOS/WebOSIDE ; exit;
Do the following :
Delete the following old config files:
C:\Users[User Name]\AppData\Roaming.webos
C:\Users[User Name]\AppData\Roaming.ares
Re-start webOS TV IDE.
I have install Elastix 2.4.0 and i want to update openfire version to 3.8.2. First i just download the rmp and make the update
rpm -Uvf
it works but nothing appear in elastix administration.
Somebody can help me?
To update Openfire you must download rpm package and run following command:
rpm -Uvf openfire-3.9.3-1.i386.rpm
After update up to 3.9.3 sometimes(on 64bit systems) you need install mo libraries to start java.
Try it with the following command:
yum install glibc.i686
After that start openfire service from elastix web panel.
You are dear Alexey,
a simple way is to login webshell as root, then type:
# wget http://www.igniterealtime.org/downloadServlet?filename=openfire/openfire-3.9.3-1.i386.rpm
# rpm -Uvf openfire-3.9.3-1.i386.rpm
if you use a 64bits system, please Java will need some additional libreries, install them by typing
# yum install glibc.i686
# reboot
After reboot your Elastix Flavour, start openfire service from elastix web panel, this may redirect your web link to http://yourip.address:9090
replace this IP by yours.
in that case, logout from Elastix GUI and login again..
Then Find your Openfire Server web GUI into Elastix Web configurator.
Happy hacking
CokoTracy
I am a web developer and new to Phonegap..
I was trying to install phone gap on my windows 7 machine as per described here
http://docs.phonegap.com/en/3.1.0/guide_cli_index.md.html#The%20Command-line%20Interface
but when i run the following command
cordova platform add android
i am getting the following error
[Error: An error occured during creation of android sub-project.
ERROR : executing command 'ant', make sure you have ant installed and added to y
our path.
]
does this mean that i should install apache ant on my machine ? if so can someone redirect me to right link.
I am also running wampserver on my machine for my other developments..
will installing 'ant' affect on my wamp ?
As described in PhoneGap Getting Started
Finally, you may need to include %ANT_HOME%\bin to your PATH as well. To check to see if this is required, run a command prompt and type ant. If the program can not be found add %ANT_HOME%\bin to the PATH. You may need to specify the full path instead of using the %ANT_HOME% environment variable.
If you need ant for Windows, you may want to download and install it from here
You need ant to add the android platform.
Ant is a java-based build tool.
You can get further informations and download it at http://ant.apache.org.
ant has nothing to do with the apache webserver and doesn't effect your wamp installation. It's another software product provided by the apache foundation.
lg
fastrde