eBay Developer Sandbox Auth Token - ebay-api

I have an issue with generating a sandbox auth token, I get redirected the following link:
https://signin.ebay.com/ws/eBayISAPI.dll?ThirdPartyAuthSucessFailure&ebaytkn=&tknexp=1970-01-01+00%3A00%3A00&username=testuser_jdawg)
once the request grant the application permission.
Which states the following message:
Thank YouHelp
Authorization cancelled
It's now safe to close the browser window/tab.
Has anyone else had this issue?

The ebay URL redirect after authentication is somewhat broken.
The default URL redirects are:
On Success: https://signin.ebay.com/ws/eBayISAPI.dll?ThirdPartyAuthSucessFailure&isAuthSuccessful=true
On Failure: https://signin.ebay.com/ws/eBayISAPI.dll?ThirdPartyAuthSucessFailure&isAuthSuccessful=false
You can also define your own URLs on the Auth tokens for eBay page of the developer site.
The problem is that ebay truncates any url you enter at the first ampersand (&) encountered. This breaks their own accept URL which ends with &isAuthSuccessful=true
To fix this all you have to do is encode the ampersand as %26. So you need to change their URLs to:
On Success: https://signin.ebay.com/ws/eBayISAPI.dll?ThirdPartyAuthSucessFailure%26isAuthSuccessful=true
On Failure: https://signin.ebay.com/ws/eBayISAPI.dll?ThirdPartyAuthSucessFailure%26isAuthSuccessful=false
Edit: As you noted, this does not affect whether or not the authorization is actually successful or not, just the message that the user sees. You can also apply this solution to your own URLs too if you don't want to use theirs.

Related

Getting error "email already in use" while requesting for authorization code in sageone API

I am trying to get access token for granting my sageone api request but before that I need to get the authorization code. But when I am trying to get one I got an error on my callback url that "email is already in use"
here is the request url
`https://www.sageone.com/oauth2/auth/central?filter=apiv3.1&client_id={{MY_CLIENT_ID}}&response_type=code&redirect_uri=http://localhost:85/test.php&scope=full_access&state=1234`
After visit above link I prompted to login to my sage account when I logged in then I redirected to the callback url which I provided in the above request and got below errors in parameters
http://localhost:85/test.php?error=Invalid+request&reason=Email+already+in+use&state=1234
any can body can suggest anything here
Email already in use usually happens in a situation, where you have logged into the Sage One/Accounting application in the browser for a different country in the past. There is a valid cookie for the user, but the application looks for the user in the wrong country.
Use this URL to reset the cookie: https://www.sageone.com/?clear. Call it before you go to https://www.sageone.com/oauth2/auth/central and this should be fixed.
Note: for more documentation about this behaviour, check out the FAQs: https://developer.sage.com/api/accounting/guides/faq/.

Spotify API authentication doesn't redirect with access token

I'm using the Spotipy library, which uses the Spotify API. When I attempt to get my access token using the 'Authorization Code Flow', I get sent to a spotify web page that asks for me authenticate the access of the app to my user's data. When I click the Okay button, that's supposed to redirect me to my redirect_uri with the access token, it simply does nothing. I get no error message or anything. When I click the Cancel button, I do get redirected to my redirect_uri page, but I don't receive the access token. Is this a bug with the API? Am I doing anything wrong?
I added the redirect_uri to the whitelist of redirect pages in my app's page by the way.
The answer for this for future readers: Make sure your redirect_uri is EXACTLY the same as the one you have saved in the developer dashboard, right down to the http and the trailing slash.

Adobe Sign access token invalid_request

I'm having trouble with Adobe Sign's OAuth authentication -- every time I try to get my access token with my Client ID and redirect URI, I get this message:
Unable to authorize access because the client configuration is invalid: invalid_request
This is the request that I have been making (with the proper substitution for REDIRECT and CLIENTID):
https://secure.echosign.com/public/oauth? redirect_uri=REDIRECT& response_type=code& client_id=CLIENTID& scope=user_login:self+agreement_send:account
I am fairly new to OAuth and don't understand what I'm doing wrong. Could someone please explain the issues that could result in this error message?
I was having the same problem. I solved it by including the correct shard in the URL after "secure." and before ".echosign". You identify your shard by looking at the URL where you created your application.
I found this information here.
Hope this helps.
Is OK to have spaces in that https request?
If you still have a problems with this.
I think your URL is not correct.
I using this one
https://secure.na2.echosign.com/public/embeddedWidget
for adobe widget.
Adobe require same url for OAuth
https://secure.na2.echosign.com/public/oauth
Check your domain, and try. You can create widget just to see your domain
This comment might get helpful for others who are facing issue in Adobe Sign access token invalid_request.
Developer Guide on Sign API: https://opensource.adobe.com/acrobat-sign/developer_guide/index.html
For the Outh process and the link to be used in user's browser:
https://secure.na1.adobesign.com/public/oauth/v2?redirect_uri=https://www.google.co.in&response_type=code&client_id=paste_your_client_id_here&scope=user_read:account
If any one using sandbox,
https://secure.na1.adobesignsandbox.com//public/oauth/v2?redirect_uri=https://www.google.co.in&response_type=code&client_id=paste_your_client_id_here&scope=user_read:account
Please ensure the correct environment identifier and shard. https://helpx.adobe.com/sign/using/identify-account-shard.html
https://helpx.adobe.com/sign/kb/unable-to-authorize-access-because-the-client-configuration-is-invalid-invalid-request-while-running-oauth-process.html
After pasting URL in browser and allowing the access to your API and getting code. Please use endpoint URL to get access token as below:
for developer account: https://api.na1.adobesign.com/oauth/v2/token
for sandbox account: https://api.na1.adobesignsandbox.com/oauth/v2/token

How to get Google TokenAuth working?

I'm developing a youtube upload application and have some troubles with a specific part of authentication. ClientLogin so far, works and uploads are received by Youtube. However I have to redirect my users logged in to the Youtube-Frontpage. I've noticed that there's a possibility to login to gmail via a url: accounts.google.com/TokenAuth?auth=....
This should be possible in the exact same way for youtube. A login at "gmail" will include the cookies I'd need for youtube login.
However, I'm not getting it to work. Which auth token do I have to use? I tried many, the one provided in the clientlogin response. I queried www.google.com/accounts/IssueAuthToken url (which gives me a token back, but I cannot login with it).
For example what I've tried:
https://accounts.google.com/TokenAuth?auth=token-received-by-issueAuthToken&service=youtube&continue=http://youtube.com&source=googletalk
And:
https://accounts.google.com/TokenAuth?auth=token-received-by-issueAuthToken&service=mail&continue=http://mail.google.com/mail&source=googletalk
None of these seem to work. The Clientlogin authentication was done with "service=youtube" - is that the mistake?
I'd appreciate any information that can clarifiy my problem.
Regards,
Dennis Fischer
So - well - I got this working finally. It took me some time because there is no real documentation.
I'll explain how the requests work, you'll need to do 3 requests:
1st: Do a default clientLogin at google.com/accounts/ClientLogin
Provide Email=emailadress&Passwd=Password&service=gaia as data, as well as any other parameter you want to add to clientLogin.
You'll receive 3 Tokens, SID, LSID and Auth - you'll need SID and LSID only!
2nd: Do a request to google.com/accounts/IssueAuthToken
Add paramters SID="Extracted SID"&LSID="Extracted LSID"&service=gaia to the URL.
You'll receive an AuthToken which should start with these characters: "APh-...."
If this is not the case your this request failed due to wrong parameters (most likely missing "service=gaia").
This token will be needed in your 3rd request.
3rd: Do a request to google.com/accounts/TokenAuth?auth="token received in step 2"&service="service where you want to authenticate, e.g. mail"&source="for example googletalk"&continue="the url where you're redirected to, this is http://mail.google.com/mail for service mail"
This 3rd request is most likely done in a browser.
Congratulations, you logged in a user into his google account with 2-Step Auth. You don't need the "real password", the application specific password is enough to generate these tokens.
Regards,
Dennis Fischer

Google OAuth 2 authorization - Error: redirect_uri_mismatch

On the website https://code.google.com/apis/console I have registered my application, set up generated Client ID: and Client Secret to my app and tried to log in with Google.
Unfortunately, I got the error message:
Error: redirect_uri_mismatch
The redirect URI in the request: http://127.0.0.1:3000/auth/google_oauth2/callback did not match a registered redirect URI
scope=https://www.googleapis.com/auth/userinfo.profile https://www.googleapis.com/auth/userinfo.email
response_type=code
redirect_uri=http://127.0.0.1:3000/auth/google_oauth2/callback
access_type=offline
approval_prompt=force
client_id=generated_id
What does mean this message, and how can I fix it?
I use the gem omniauth-google-oauth2.
The redirect URI (where the response is returned to) has to be registered in the APIs console, and the error is indicating that you haven't done that, or haven't done it correctly.
Go to the console for your project and look under API Access. You should see your client ID & client secret there, along with a list of redirect URIs. If the URI you want isn't listed, click edit settings and add the URI to the list.
EDIT: (From a highly rated comment below) Note that updating the google api console and that change being present can take some time. Generally only a few minutes but sometimes it seems longer.
In my case it was www and non-www URL. Actual site had www URL and the Authorized Redirect URIs in Google Developer Console had non-www URL. Hence, there was mismatch in redirect URI. I solved it by updating Authorized Redirect URIs in Google Developer Console to www URL.
Other common URI mismatch are:
Using http:// in Authorized Redirect URIs and https:// as actual URL, or vice-versa
Using trailing slash (http://example.com/) in Authorized Redirect URIs and not using trailing slash (http://example.com) as actual URL, or vice-versa
Here are the step-by-step screenshots of Google Developer Console so that it would be helpful for those who are getting it difficult to locate the developer console page to update redirect URIs.
Go to https://console.developers.google.com
Select your Project
Click on the menu icon
Click on API Manager menu
Click on Credentials menu. And under OAuth 2.0 Client IDs, you will find your client name. In my case, it is Web Client 1. Click on it and a popup will appear where you can edit Authorized Javascript Origin and Authorized redirect URIs.
Note: The Authorized URI includes all localhost links by default, and any live version needs to include the full path, not just the domain, e.g. https://example.com/path/to/oauth/url
Here is a Google article on creating project and client ID.
If you're using Google+ javascript button, then you have to use postmessage instead of the actual URI. It took me almost the whole day to figure this out since Google's docs do not clearly state it for some reason.
In any flow where you retrieved an authorization code on the client side, such as the GoogleAuth.grantOfflineAccess() API, and now you want to pass the code to your server, redeem it, and store the access and refresh tokens, then you have to use the literal string postmessage instead of the redirect_uri.
For example, building on the snippet in the Ruby doc:
client_secrets = Google::APIClient::ClientSecrets.load('client_secrets.json')
auth_client = client_secrets.to_authorization
auth_client.update!(
:scope => 'profile https://www.googleapis.com/auth/drive.metadata.readonly',
:redirect_uri => 'postmessage' # <---- HERE
)
# Inject user's auth_code here:
auth_client.code = "4/lRCuOXzLMIzqrG4XU9RmWw8k1n3jvUgsI790Hk1s3FI"
tokens = auth_client.fetch_access_token!
# { "access_token"=>..., "expires_in"=>3587, "id_token"=>..., "refresh_token"=>..., "token_type"=>"Bearer"}
The only Google documentation to even mention postmessage is this old Google+ sign-in doc. Here's a screenshot and archive link since G+ is closing and this link will likely go away:
It is absolutely unforgivable that the doc page for Offline Access doesn't mention this. #FacePalm
For my web application i corrected my mistake by writing
instead of : http://localhost:11472/authorize/
type : http://localhost/authorize/
Make sure to check the protocol "http://" or "https://" as google checks protocol as well.
Better to add both URL in the list.
1.you would see an error like this
2.then you should click on request details
after this , you have to copy that url and add this on https://console.cloud.google.com/
go to https://console.cloud.google.com/
click on Menu -> API & Services -> Credentials
you would see a dashboard like this ,click on edit OAuth Client
now in Authorized Javascript Origins and Authorized redirect URLS
add the url that has shown error called redirect_uri_mismatch i.e here it is
http://algorithammer.herokuapp.com , so i have added that in both the places in
Authorized Javascript Origins and Authorized redirect URLS
click on save and wait for 5 min and then try to login again
This seems quite strange and annoying that no "one" solution is there.
for me http://localhost:8000 did not worked out but http://localhost:8000/ worked out.
This answer is same as this Mike's answer, and Jeff's answer, both sets redirect_uri to postmessage on client side. I want to add more about the server side, and also the special circumstance applying to this configuration.
Tech Stack
Backend
Python 3.6
Django 1.11
Django REST Framework 3.9: server as API, not rendering template, not doing much elsewhere.
Django REST Framework JWT 1.11
Django REST Social Auth < 2.1
Frontend
React: 16.8.3, create-react-app version 2.1.5
react-google-login: 5.0.2
The "Code" Flow (Specifically for Google OAuth2)
Summary: React --> request social auth "code" --> request jwt token to acquire "login" status in terms of your own backend server/database.
Frontend (React) uses a "Google sign in button" with responseType="code" to get an authorization code. (it's not token, not access token!)
The google sign in button is from react-google-login mentioned above.
Click on the button will bring up a popup window for user to select account. After user select one and the window closes, you'll get the code from the button's callback function.
Frontend send this to backend server's JWT endpoint.
POST request, with { "provider": "google-oauth2", "code": "your retrieved code here", "redirect_uri": "postmessage" }
For my Django server I use Django REST Framework JWT + Django REST Social Auth. Django receives the code from frontend, verify it with Google's service (done for you). Once verified, it'll send the JWT (the token) back to frontend. Frontend can now harvest the token and store it somewhere.
All of REST_SOCIAL_OAUTH_ABSOLUTE_REDIRECT_URI, REST_SOCIAL_DOMAIN_FROM_ORIGIN and REST_SOCIAL_OAUTH_REDIRECT_URI in Django's settings.py are unnecessary. (They are constants used by Django REST Social Auth) In short, you don't have to setup anything related to redirect url in Django. The "redirect_uri": "postmessage" in React frontend suffice. This makes sense because the social auth work you have to do on your side is all Ajax-style POST request in frontend, not submitting any form whatsoever, so actually no redirection occur by default. That's why the redirect url becomes useless if you're using the code + JWT flow, and the server-side redirect url setting is not taking any effect.
The Django REST Social Auth handles account creation. This means it'll check the google account email/last first name, and see if it match any account in database. If not, it'll create one for you, using the exact email & first last name. But, the username will be something like youremailprefix717e248c5b924d60 if your email is youremailprefix#example.com. It appends some random string to make a unique username. This is the default behavior, I believe you can customize it and feel free to dig into their documentation.
The frontend stores that token and when it has to perform CRUD to the backend server, especially create/delete/update, if you attach the token in your Authorization header and send request to backend, Django backend will now recognize that as a login, i.e. authenticated user. Of course, if your token expire, you have to refresh it by making another request.
Oh my goodness, I've spent more than 6 hours and finally got this right! I believe this is the 1st time I saw this postmessage thing. Anyone working on a Django + DRF + JWT + Social Auth + React combination will definitely crash into this. I can't believe none of the article out there mentions this except answers here. But I really hope this post can save you tons of time if you're using the Django + React stack.
In my case, my credential Application type is "Other". So I can't find Authorized redirect URIs in the credentials page. It seems appears in Application type:"Web application". But you can click the Download JSON button to get the client_secret.json file.
Open the json file, and you can find the parameter like this: "redirect_uris":["urn:ietf:wg:oauth:2.0:oob","http://localhost"]. I choose to use http://localhost and it works fine for me.
When you register your app at https://code.google.com/apis/console and
make a Client ID, you get a chance to specify one or more redirect
URIs. The value of the redirect_uri parameter on your auth URI has to
match one of them exactly.
Checklist:
http or https?
& or &?
trailing slash(/) or open ?
(CMD/CTRL)+F, search for the exact match in the credential page. If
not found then search for the missing one.
Wait until google refreshes it. May happen in each half an hour if you
are changing frequently or it may stay in the pool. For my case it was almost half an hour to take effect.
for me it was because in the 'Authorized redirect URIs' list I've incorrectly put https://developers.google.com/oauthplayground/ instead of https://developers.google.com/oauthplayground (without / at the end).
The redirect url is case sensitive.
In my case I added both:
http://localhost:5023/AuthCallback/IndexAsync
http://localhost:5023/authcallback/indexasync
If you use this tutorial: https://developers.google.com/identity/sign-in/web/server-side-flow then you should use "postmessage".
In GO this fixed the problem:
confg = &oauth2.Config{
RedirectURL: "postmessage",
ClientID: ...,
ClientSecret: ...,
Scopes: ...,
Endpoint: google.Endpoint,
}
beware of the extra / at the end of the url
http://localhost:8000 is different from http://localhost:8000/
It has been answered thoroughly but recently (like, a month ago) Google stopped accepting my URI and it would not worked. I know for a fact it did before because there is a user registered with it.
Anyways, the problem was the regular 400: redirect_uri_mismatch but the only difference was that it was changing from https:// to http://, and Google will not allow you to register http:// redirect URI as they are production publishing status (as opposed to localhost).
The problem was in my callback (I use Passport for auth) and I only did
callbackURL: "/register/google/redirect"
Read docs and they used a full URL, so I changed it to
callbackURL: "https://" + process.env.MY_URL+ "/register/google/redirect"
Added https localhost to my accepted URI so I could test locally, and it started working again.
TL;DR use the full URL so you know where you're redirecting
2015 July 15 - the signin that was working last week with this script on login
<script src="https://apis.google.com/js/platform.js" async defer></script>
stopped working and started causing Error 400 with Error: redirect_uri_mismatch
and in the DETAILS section: redirect_uri=storagerelay://...
i solved it by changing to:
<script src="https://apis.google.com/js/client:platform.js?onload=startApp"></script>
Rails users (from the omniauth-google-oauth2 docs):
Fixing Protocol Mismatch for redirect_uri in Rails
Just set the full_host in OmniAuth based on the Rails.env.
# config/initializers/omniauth.rb
OmniAuth.config.full_host = Rails.env.production? ? 'https://domain.com' : 'http://localhost:3000'
REMEMBER: Do not include the trailing "/"
None of the above solutions worked for me. below did
change authorised Redirect urls to - https://localhost:44377/signin-google
Hope this helps someone.
My problem was that I had http://localhost:3000/ in the address bar and had http://127.0.0.1:3000/ in the console.developers.google.com
Just make sure that you are entering URL and not just a domain.
So instead of:
domain.com
it should be
domain.com/somePathWhereYouHadleYourRedirect
Anyone struggling to find where to set redirect urls in the new console: APIs & Auth -> Credentials -> OAuth 2.0 client IDs -> Click the link to find all your redirect urls
My two cents:
If using the Google_Client library do not forget to update the JSON file on your server after updating the redirect URI's.
I also get This error Error-400: redirect_uri_mismatch
This is not a server or Client side error but you have to only change by checking that you haven't to added / (forward slash) at the end like this
redirecting URL list ❌:
https://developers.google.com/oauthplayground/
Do this only ✅:
https://developers.google.com/oauthplayground
Let me complete #Bazyl's answer: in the message I received, they mentioned the URI
"http://localhost:8080/"
(which of course, seems an internal google configuration). I changed the authorized URI for that one,
"http://localhost:8080/" , and the message didn't appear anymore... And the video got uploaded... The APIS documentation is VERY lame... Every time I have something working with google apis, I simply feel "lucky", but there's a lack of good documentation about it.... :( Yes, I got it working, but I don't yet understand neither why it failed, nor why it worked... There was only ONE place to confirm the URI in the web, and it got copied in the client_secrets.json... I don't get if there's a THIRD place where one should write the same URI... I find nor only the documentation but also the GUI design of Google's api quite lame...
I needed to create a new client ID under APIs & Services -> Credentials -> Create credentials -> OAuth -> Other
Then I downloaded and used the client_secret.json with my command line program that is uploading to my youtube account. I was trying to use a Web App OAuth client ID which was giving me the redirect URI error in browser.
I have frontend app and backend api.
From my backend server I was testing by hitting google api and was facing this error. During my whole time I was wondering of why should I need to give redirect_uri as this is just the backend, for frontend it makes sense.
What I was doing was giving different redirect_uri (though valid) from server (assuming this is just placeholder, it just has only to be registered to google) but my frontend url that created token code was different. So when I was passing this code in my server side testing(for which redirect-uri was different), I was facing this error.
So don't do this mistake. Make sure your frontend redirect_uri is same as your server's as google use it to validate the authenticity.
The main reason for this issue will only come from chrome and chrome handles WWW and non www differently depending on how you entered your URL in the browsers and it searches from google and directly shows the results, so the redirection URL sent is different in a different case
Add all the possible combinations you can find the exact url sent from fiddler , the 400 error pop up will not give you the exact http and www infromation
Try to do these checks:
Bundle ID in console and in your application. I prefer set Bundle ID of application like this "org.peredovik.${PRODUCT_NAME:rfc1034identifier}"
Check if you added URL types at tab Info just type your Bundle ID in Identifier and URL Schemes, role set to Editor
In console at cloud.google.com "APIs & auth" -> "Consent screen" fill form about your application. "Product name" is required field.
Enjoy :)