I am trying to switch to ionic2. Installing on top of my previous installation of ionic 1 appears to succeed (based on the output) but ionic1 remains as shown by ionic info. Here were the steps. Any help would be appreciated.
Successfully Installed ionic2#beta using sudo npm install -g ionic#beta
ionic -v shows version 1.7.14
Uninstalled using npm uninstall -g ionic
Successfully (based on printout) uninstalled ionic 2
ionic -v shows version 1.7.14 (WTF)
Tried 'npm uninstall -g ionic' again
Received command prompt immediately, no other outputs (no affect)
ionic -v shows version 1.7.14
With some investigation I found out what was going wrong. At some point earlier I had installed ionic version 1 which got loaded by npm in /usr/local/lib as part of the sub-directory node_modules. Later on when I installed version 2 globally with sudo it installed it in my home directory ~/.npm-global/lib/node_modules/ionic/bin. The installed program was a node script called ionic. The bash alias was still pointing to the version 1 code. I don't know why npm changed the directory. To fix the problem, I did the following:
Deleted the folder /usr/local/bin/node_modules/ionic
Removed the symbolic link to the alias named ionic
Re-installed the ionic#beta globally using sudo. This created the node script ionic in ~/.npm-global/lib/node_modules/ionic/bin.
Tested it using the full path to the node script ionic
In the process of creating a symbolic link named ionic so I can access the command from anywhere in my home directory.
Have to load cordova 4.3 and
I should have found this earlier but I am getting rusty in my command line skills. It turns out that ionic-cli is works for both v1 and v2.
You are using wrong command ionic2#beta to install ionic 2. Use
$ npm install -g ionic#beta
use this
sudo npm uninstall -g ionic
This works for me on ubuntu 16,
to remove cordova, ionic:
sudo npm uninstall -g cordova
sudo npm uninstall -g ionic
and for npm:
sudo npm uninstall npm -g
hope it will work
For mac user delete this folders.
/usr/local/lib/node_modules/ionic
/usr/local/share/npm/lib/node_modules/ionic
As you could install it with
npm install -g ionic
you should uninstall it with
npm uninstall -g ionic
Related
For some reasons I can't update or remove my version of Expo-cli.
I'm stuck on the 3.11.7 version. When I launch the update, it ends correctly but without being taken into account.
I've tested all the methods I've found but I haven't been able to uninstall it yet.
When I launch my project, it continues to launch normally with the v.3.11.7.
here are the commands line i already try :
yarn global remove expo-cli
npm -g uninstall expo-cli --save
sudo apt-get --purge remove expo-cli
yarn uninstall expo-cli
the expo --version commands is not working anymore ...
I need help please.
screenShot of the update request:
Please confirm OS. Mine is Windows 10.
Look in appdata for yarn or npm install directories. You can find the globally installed package files and delete expo.
Essentially an npm or yarn version other than the one you're using has installed the expo-cli and now your current version can't find it.
I solved this by deleting the expo files in that dir
Had the same problem. Here's how I decided it ( Win 10 )
Open cmd as administrator and type npm cache verify
After that type npm -g uninstall expo-cli --save, if it freezing terminate it.
Remove from your user folder ".expo" folder.
Than try npm -g uninstall expo-cli --save in cmd, if it freezing terminate it and open some expo project.
type yarn remove global expo-cli and then yarn add global expo-cli in the project
Hope it helps somebody else too.
I am trying to uninstall the "react-native-cli" which I use for react-native projects! but I am not able to do so!
My environment is mac.
Here is what i have done so far!
Whether I type npm uninstall -g react-native-cli or sudo npm uninstall -g react-native-cli.
The terminal shows: up to date in 0.041s
When I type react-native init projectName, it still creates the project.
I think the command react-native init should not to work.
Anyone knows how to uninstall react-native-cli ?
Thanks in advance.
SOLUTION ONE !
not fully sure this will work! but try updating your npm first by doing
npm install npm
and after that try uninstalling the cli if that does not work then
SOLUTION TWO !
Here is another go around to solve the issue its a bit manual way
1: First run this
npm list -g
this will show the list of installed packages in your user folder
then check . using command+f if there is react-native-cil there
then do this
open /usr/local/lib/node_modules
This will open the root installed packages and you can manually find and delete the react-native-cli like this
If you are using yarn. You can do yarn global list then check that if any package contains react-native. Then run yarn global remove <package> to remove that package.
ex:
yarn global remove #react-native-community/cli
You can uninstall react native CLI using:
npm uninstall -g react-native-cli
I am a newbie in all this stuff. Hope for your understanding.
Let me clarify the issue:
I am trying to start react native app through expo cli. So tried to start npm install expo-cli --global to install npm globally. I got these errors:
Screen_1
Screen_2
It also says that I lack permissions to access it. How can I allow permissions?
Even when I try to start it locally I got the same issue. Your help is appreciated.
although this solution is not the best and the safest solution exists, this worked for me and that make sense because all the problem we had with the errors is the permission problems. so you can use this command and ignore those permission problems :
sudo npm install expo-cli -g --unsafe-perm
I was having the same problem with npm install -g expo-cli, having "MODULE_NOT_FOUND",
I installed yarm with brew, just in case you do not already have it:
brew install yarn
and then use:
yarn global add expo-cli
to create a project you can:
expo init nameOfTheNewProject
and choose a template in the console.
Finally run the project with
yarn start
Let me know if it works for you!
You did not mention which os. This answer working for any operating system (ubuntu in my case)
I'm also getting permission errors when running
sudo npm install --global expo-cli
Which I don't really how this can happen - as this also happens for the superuser!
For me it works when I install the client locally into the project
cd <new-project-dir>
npm init # init npm project
npm install expo-cli
Now you can use the client in this project like this:
npx expo-cli # e.g. npx expo-cli init <project-name>
npm cache clean --force
This will solve the issue
Try using npm install -g expo-cli#3.5.0 this worked for me, it may work for you.
You can try this command:
npm install -g expo-cli
or,
yarn global add expo-cli
You have to run the command as administrator from a command prompt on windows and not bash. Had me stumpt for bloody ages!
You need administrator privilege. So when you open command line interface, just right click and run as administrator
This will solve the problem
I guess, this issue comes from permission or node version , if you get this error when the node module is being refreshed ---> This is definitely a permission issue. Disable your Antiviruses or change permission manually check this as well.
First run npm cache verify, then run sudo npm install --global expo-cli.
Did work for me indeed after trying so much.
Follow the steps
First, run npm cache verify.
Open Windows PowerShell as administrator and run npm install expo-cli
--global --no-optional command.
npm cache clean --force then npm install --unsafe-perm -g expo-cli
It is likely you do not have the permissions to access this file as the current user.
The best way to solve this problem is to reinstall npm with a node version manager.And you don't need to remove your current version.
About node version manager
use nvm or n with OSX or Linux
use nodist or nvm-windows with windows
Upgrade Node version to +10
Then do
sudo npm install expo-cli -g
This worked for me. I hope this would solve your problem!
sudo npm install expo-cli -g --unsafe-perm=true --allow-root
If any of the solutions above result in success, please follow the steps below:
Uninstall Node.js
Restart your pc/mac
Download latest version of the Node.js (https://nodejs.org/en/)
Open cmd as admin mode or use "sudo" before the command line on Mac.
npm install expo-cli --global
I hope it can help
In my case, I deleted two files then everything worked. The two files are in this path: C:\Users\{Username}\AppData\Roaming\npm under the names 'expo.ps1' and 'expo-cli.ps1'
Then run:
npm i -g expo-cli
re-install node.js, it works for me
First update Node.js to the latest stable version and then again try to install expo ad clean before expo folders that are being created in below location
C:\Users\{{computer_username}}\AppData\Roaming\npm
If it's throwing error in visual studio code, try from cmd, was facing same error but solved through this way
npm install -g expo-cli
try going into windows resource monitor and terminating adb.exe (android resource bridge). This worked for me after searching for solutions for days. I tried this after verifying cache, clearing cache, you name it.
As a Debian 10 buster user I got the same permission error while using this command: sudo npm install expo-cli --global.
The problem was solved by installing expo-cli with yarn package manager and the command below: sudo yarn global add expo-cli.
For Windows User :-
Open your Powershell and type:
npm install expo-cli --global
This worked for me after trying and reasearching for hours.
Note:Don't Use cmd or any other terminal and also don't type npm install expo-cli -g as it is written in the react native docs. It would always show up an npm error.
For windows
Follow these steps carefully
open the command prompt and run it as administrator.
recommended npm uninstall --global expo-cli.
run the command npm cache clean --force.
run the command npm cache verify .
now run the command npm install --global expo-cli
dont run command like npm i -g expo-cli or npm install -g expo-cli.
7.Make sure you run the command mentioned in the 4th step ONLY.
thankyou.
I had this problem in Windows 10, to be able to install the latest version (I had no choice since it broke the current one). I had to install the latest version of Python (3.8.0) and then run npm install --global --production windows-build-tools as an administrator, then I was able to run again: npm install expo-cli --global to install the version 3.8.0 of the expo-cli
Here is the solution and 100% working. I am working with Windows and not sure abut Linux.
Open cmd and
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser
then press yes
Now run the command to start your project
npm install -g expo-cli
I had previously removed Expo from my Windows machine and encountered this error whilst trying to reinstall. Reading the error message solved the problem.
npm i expo-cli -g --legacy-peer-deps
Using this command in 'PowerShell' installed expo successfully.
If anyone else has this problem here is my fix, go to Finder, in the input field (search box) type in /usr/local/lib then press CMD + SHIFT + G press the OK button or whatever pops up, then CMD + SHIFT + . and delete the NVM file i deleted the expo folder too. Then go to this link https://changelog.com/posts/install-node-js-with-homebrew-on-os-x
follow the instructions and install brew, node, etc. Last step go to your terminal and type sudo npm install expo-cli --global
First: I upgraded my mac version 10.13 to 10.15
Then I downloaded homebrew, Watchman, Git and Node.js
Finally I ran this command sudo npm install --global expo-cli --legacy-peer-deps
If you have any further questions check the docs out: https://docs.expo.dev/get-started/installation/
Sometime, I use npm not work.
I try a lots times run with npm but fail for expo cli.
Please try yarn global add expo-cli
It wills save your time ^^.
I was trying to install expo-cli with my company npm registry configured.
I've created 2 differents profiles using npmrc and using the profile with https://registry.npmjs.org/ solved the issue.
While installing the dependencies of vue-cli, vue is not identified. Why?
rm -rf node_modules and npm install again
have a look here
Add sudo before yarn when installing
yarn global remove #vue/cli
sudo yarn global add #vue/cli
vue
I had the same issue for a while.
TL;DR
npm install #vue/cli-service --save-dev
As the documentation specify it is a development dependency https://cli.vuejs.org/guide/#cli-service
The CLI Service (#vue/cli-service) is a development dependency. It's an npm package installed locally into every project created by #vue/cli.
Origin
I had a fresh install of nodejs
And just did
>> sudo npm install -g #vue/cli#latest
>> vue --version
#vue/cli 4.5.8
The issue
The issue presented like this
>> npm run serve
yarn run v1.22.10
$ vue-cli-service build --mode development --watch
/bin/sh: 1: vue-cli-service: not found
error Command failed with exit code 127.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
The fixes:
npm install #vue/cli-service --save-dev
Which led me straight to another error message
>> npm run serve
yarn run v1.22.10
$ vue-cli-service build --mode development --watch
ERROR Error: Cannot find module 'vue-template-compiler/package.json'
Which I fixed the same way
npm i vue-template-compiler --save-dev
And now it is working fine.
Installing current version without permanently installing vue-cli.
npx #vue/cli create appname
It shows the vue executable is located at /home/alisha/.local/bin. So probably this location is not there in your $PATH.
You should be able to run the vue commands if you provide the full path, like:
~/.local/bin/vue create hello-world
You can also see if that directory is in your PATH by running some command like:
echo $PATH | grep '.local/bin/'
If it's there, you would see it, otherwise you can add it to your path by placing it in your ~/.profile.
Edit ~/.profile and add the following at the bottom of it.
PATH="$HOME/.local/bin:$PATH"
Hope it helps!!
I had the same issue while making a build for production.
You will require vue-cli to be installed. Use below command to install the latest version.
npm install -g #vue/cli#latest
Then
npm install
Might have to do with you having an old version on your computer:
Warning regarding Previous Versions
The package name changed from vue-cli to #vue/cli. If you have the previous vue-cli (1.x or 2.x) package installed globally, you need to uninstall it first with
npm uninstall vue-cli -g or yarn global remove vue-cli.
You can find it here: https://cli.vuejs.org/guide/installation.html
THIS FIXED THE ISSUE FOR ME:
After running
sudo npm install -g #vue/cli
I ran
sudo nano $HOME/.profile
and pasted the following line
export PATH=$PATH:/home/chike/.npm-global/bin
after writing the code, next thing I did was Ctrl + O, ENTER and Ctrl + X then wrote
vue init webpack myapp
When you install vue using cli that time you got the path of vue.Now you can copy the bin folder path.
In my example /home/sublime/.npm-packages/bin
Now you export the path below command
export PATH=$PATH:/home/sublime/.npm-packages/bin
I solved mine by running (add sudo if needed)
npm i -g vue-cli#2.9.6
npm i -g #vue/cli
Got similar issue when deploy vue project in jenkins.
Here is what I did:
Add node's bin/ dir, to jenkins user's .bashrc file.
e.g
# node
NODE_HOME=/home/dev/.nvm/versions/node/default
PATH=$NODE_HOME/bin:$PATH
Tips - about nvm & yarn
When you manage node version via nvm, make sure you already choose the node version in terminal. e.g:
nvm use stable
node -v
If you use nvm, and installed yarn via npm, then better install vue-cli via npm not yarn, otherwise the vue executable is not placed into node's bin/ dir, at least that's the case in my tests, and as a result will cause you fail to find the vue command.
Using Yarn on Ubuntu it is installed to ~/.npm-packages/bin/. You must add this directory to your PATH. For example run the following command, close your terminal and open a new one.
user#machine:~$ echo 'export PATH="$PATH:~/.npm-packages/bin/"' >> ~/.bashrc
Note: if the file ~/.bashrc does not exist then simply create it.
Following worked for me:
First remove all the existing ones:
yarn global remove #vue/cli
yarn global remove #vue/cli-service
sudo yarn global remove #vue/cli
sudo yarn global remove #vue/cli-service
Then add #vue/cli using sudo:
Note: use sudo if required
yarn global add #vue/cli
yarn global add #vue/cli-service
Then, the final thing to do is to RESTART the terminal.
vue --version
#vue/cli 4.5.9
If you already got a project, the only two things you need to do is:
Delete the directory node_modules (it is safe, since it is not under git and will regenerate in the next step)
In the command-line write yarn install (it will install everything you need)
If you start installing vue-cli manually in a existing project, it the package.json and package-lock.json will be updated. If you already did. Do a checkout from git, and follow my steps above
This may be a problem caused by version conflicts. "export PATH=$PATH:" This is really useful in some cases. But if you are also like me, after trying the direct “export path” method in the comment above, restarting the terminal still can not execute the situation, you can try this way.
Uninstall Vue
npm uninstall -g #vue/cli
Check the local-global npm package installation path, vue is installed in this directory, check if it has been removed.
npm root -g
Install vue (you can check with https://cli.vuejs.org/#getting-started to find the latest command)
npm install -g #vue/cli
Create a connection to the /usr/local/bin directory(You need to find the vue.js path after the local installation first, then replace this path with your latest local install path:/Users/xxxxx/.npm-global/lib/node_modules/#vue/cli/bin/vue.js)
ln -s /Users/xxxxx/.npm-global/lib/node_modules/#vue/cli/bin/vue.js /usr/local/bin/vue
View version number
vue -v
I was getting the same error because Node.js was not installed. My issue got resolved by installing Node.js using the following command:
sudo apt install nodejs-legacy
To see if you already have Node.js and npm installed and check the installed version, run the following commands:
node -v
npm -v
If both are installed then follow the steps here:
https://docs.npmjs.com/resolving-eacces-permissions-errors-when-installing-packages-globally
I installed the package using yarn global add #vue/cli on my Ubuntu box and found the binary in /home/vonkad/.yarn/bin.
I had to modify my /home/vonkad/.bashrc and add the directory to the path export PATH=$PATH:/home/vonkad/.yarn/bin.
To fix this situation, I had to add the following line to my .zshrc (maybe in your case is .bashrc)
export PATH="$(yarn global bin):$PATH"
Effectively, the yarn global bin is a folder where vue (vue-cli 3) was placed.
What helped me
mac os catalina with zsh terminal
Uninstalled node and npm using https://www.positronx.io/how-to-uninstall-node-js-and-npm-from-macos/
Downloaded node/npm from https://nodejs.org/en/download/current/
sudo npm install -g #vue/cli
vue --version (#vue/cli 4.5.4)
I faced the same issue and now resolved. In my case I installed Node.js and NPM using the default Ubuntu repository by using this command sudo apt-get install nodejs npm
The problems seemed like those 2 packages are not well maintained so it caused some bugs.
So I purge those packages and reinstall it from nodesource which is officially recommended way to install (reference: Installation instruction from nodesource) using these commands.
curl -sL https://deb.nodesource.com/setup_14.x | sudo -E bash -
sudo apt-get install -y nodejs
Then reinstall #vue/cli again
sudo npm install -g #vue/cli
Now these issues have gone. Hope it helps some programmers.
You need to install vue via sudo like explained in the doc:
https://cli.vuejs.org/guide/installation.html
If you have WSL2 running and you use zsh like me, just add
yarn global add #vue/cli
# add this line to ~/.zshrc
export PATH="$HOME/.yarn/bin:$PATH"
$ vue --version
#vue/cli 4.x.xx
You can try the following code install see
npm install --global vue-cli
vue init webpack <YOUR-PROJECT-NAME-HERE>
cd <YOUR-PROJECT-NAME-HERE>
npm install
npm run dev
Please check the below image and give a solution for this, I am stuck, please help.
Finally was able to fix the issue and install ionic, so I was hoping I should share it, if anyone having the same issue please check if my steps also works for you.
Turn off Windows Firewall
Turn off any/every Antivirus or windows defender you are running.
Clear npm cache, run - $ npm cache clean
Remove Nodejs
Restart PC
Install latest version of Nodejs
Clear npm cache again, run - $ npm cache clean
[important] First only install cordova, run - $ npm install -g cordova
Then install Ionic, run - $ npm install -g ionic
Hopefully it will work, this how I was able to fix my issue.
You have to install Node JS 0.12.6 Version,
and after that, use:
$npm install -g cordova ionic
in DOS (cmd). It will install ionic and Cordova.