I am working on a project in visual studio 2012. Recently, I added a database project to the solution. The database already existed before I added it to the solution and everything worked fine.
Now, however, when I try to run the application I get errors. The errors are being caused by a computer-generated file called [database name].sql. At the top of the tile, it reads:
/*
Deployment script for [the database name here]
This code was generated by a tool.
Changes to this file may cause incorrect behavior and will be lost if
the code is regenerated.
*/
This file gets re-created every time the application runs. The errors that occur appear to be syntax errors. I cannot fix them because any changes I make to the file are irrelevant because a new file gets generated with each run and the errors re-appear.
I tried looking into this more online but had trouble. This is all rather new to me.
Here are some of the errors being created:
GO
:setvar DatabaseName "(the database name is here)"
which gives me three errors that read:
Error 88 SQL80001: Incorrect syntax near ':'.
Error 89 SQL80001: 'DatabaseName' is not a recognized option.
Error 90 SQL80001: Incorrect syntax near '"(the database name is here in the code)"'.
Also, there is a line of code that reads:
CREATE USER [(the domain)\(the username)] FOR LOGIN [(the domain)\(the username)];
GO
which gives the following error:
Error 119 SQL72014: .Net SqlClient Data Provider: Msg 15401, Level 16, State 1, Line 1 Windows NT user or group '(the domain)\(the username)' not found. Check the name again.
From the errors you have posted it looks like there are two issues:
Windows NT user or group '(the domain)\(the username)' not found. - The user being used to access the database doesn't exist. As it's a Windows user I'm guessing that it uses the current user's credentials.
Make sure that your instance of SQL can accept Windows logins and that you (and anyone else building the software) has the necessary access rights.
'DatabaseName' is not a recognized option. - This is more than likely also caused by the first issue, but double check that the database exists.
The error message caught me out recently as it did not relate to the cause of my problem at all. It turns out my SQL script was incorrectly written (for my case - I forgot to add IDENTITY (1,1) to my PK column) to begin with.
Moral of the story for me was to test out the SQL data file in SSMS first.
Related
More info from stms :
Short Text
SQL error "SQL code: -10108" occurred while accessing table "CDHDR".
What happened?
Database error text: "SQL message: Session has been reconnected."
Return value of the database layer: "SQL dbsl rc: 99"
The problem is that client is running this code through the job in which I am not available to debug it. All I know is that it is working for other countries selected but for some specific it is not so the question is :
Was it a temporary connection error between two servers or is it data overload issue due to SELECT statement?
At the moment I am not really sure which thing I have to look on the system, the same program once produced the error for exceeding the limit in the db query ( > 10 minutes) so this might be related to system configuration or what?
Thanks in advance
got error when calling package
error is
Error starting at line : 1 in command -
PKG_Generate_GRNo.GenerateGR(TO_NUMBER(:P164_APP_ID,
'9999999'),:APP_USER,:P164_FIRST_NAME,:P164_LAST_NAME,:P164_EMAIL,:P164_SKYPE_ID,:P164_COUNTRY,:P164_DATE_OF_BIRTH)
Error report - Unknown Command
PKG_Generate_GRNo.GenerateGR(TO_NUMBER(:P164_APP_ID,
'9999999'),:APP_USER,:P164_FIRST_NAME,:P164_LAST_NAME,:P164_EMAIL,
:P164_SKYPE_ID,:P164_COUNTRY,:P164_DATE_OF_BIRTH);
Session state protection violation is definitely an Apex error, relating to your page settings. It seems your package is trying to change the state of a read-only page. See this other question.
The item identifier in the error message P164_COURSECOUNT has the same prefix as the parameters you pass to the package (:P164_APP_ID) so presumably they relate to the same page. We know nothing about your application or its architecture, so it's hard to offer concrete advice. Maybe you need to change the page or item settings, maybe you need to change what the package does. Only you can tell the right course of action.
As you didn't post the whole command, a note: you have to enclose it into begin-end block, e.g.
BEGIN
PKG_Generate_GRNo.GenerateGR (TO_NUMBER ( :P164_APP_ID, '9999999'),
:APP_USER,
:P164_FIRST_NAME,
:P164_LAST_NAME,
:P164_EMAIL,
:P164_SKYPE_ID,
:P164_COUNTRY,
:P164_DATE_OF_BIRTH);
END;
/
In Powerbuilder I am trying to update a table (Oracle) with blob but get sqlerror, "Database statement must refer to blob variable". My declaration and updateblob statements are as follows:
blob lblob_newxml
long llong_subid
UPDATEBLOB RP_XML_FORMS SET XML_DOC = :lblob_newxml
WHERE SUBMISSION_ID = :llong_subid
USING SQLCA;
Does anybody know why it is happening and or how to solve this problem? Thanks.
To get more information on this problem and the possible causes, I'd run with one of the database traces turned on. (You can check out database trace options in the Connecting to Your Database manual; link may not be appropriate for your PB version, which you haven't mentioned yet.) This may or may not tell you more, but it tracks everything between the app and when the PB drivers pass the commands "over the wall" to the database's driver.
Good luck,
Terry.
"The PowerBuilder VM can get the SQL syntax for the following types of errors, and passes it to the Transaction object’s DBError event for the following types of errors: ..." (see this page).
If your lblob_newxml is null then use this update statement instead:
UPDATE RP_XML_FORMS SET XML_DOC = NULL
WHERE SUBMISSION_ID = :llong_subid
USING SQLCA;
Good day!
I get this error:
SQL STATE 37000 [Microsoft][ODBC Microsoft Access Driver] Syntax Error
or Access Violation, when trying to run an embedded SQL statement on
Powerscript.
I am using MsSQL Server 2008 and PowerBuilder 10.5, the OS is Windows 7. I was able to determine one of the queries that is causing the problem:
SELECT top 1 CONVERT(DATETIME,:ls_datetime)
into :ldtme_datetime
from employee_information
USING SQLCA;
if SQLCA.SQLCODE = -1 then
Messagebox('SQL ERROR',SQLCA.SQLERRTEXT)
return -1
end if
I was able to come up with a solution to this by just using the datetime() function of PowerBuilder. But there are other parts of the program that is causing this and I am having a hard time in identifying which part of the program causes this. I find this very weird because I am running the same scripts here in my dev-pc with no problems at all, but when trying to run the program on my client's workstation I am getting this error. I haven't found any differences in the workstation and my dev-pc. I also tried following the instructions here, but the problem still occurs.
UPDATE: I was able to identify the other script that is causing the problem:
/////////////////////////////////////////////////////////////////////////////
// f_datediff
// Computes the time difference (in number of minutes) between adtme_datefrom and adtme_dateto
////////////////////////////
decimal ld_time_diff
SELECT top 1 DATEDIFF(MINUTE,:adtme_datefrom,:adtme_dateto)
into :ld_time_diff
FROM EMPLOYEE_INFORMATION
USING SQLCA;
if SQLCA.SQLCODE = -1 then
Messagebox('SQL ERROR',SQLCA.SQLERRTEXT)
return -1
end if
return ld_time_diff
Seems like passing datetime variables causes the error above. Other scripts are working fine.
Create a transaction user object inherited trom transaction.
Put logic in the sqlpreview of your object to capture and log the sql statement being sent to the db.
Instantiate it, connect to the db, and use it in your embedded sql.
Assuming the user gets the error you can then check what was being sent to the db and go from there.
The error in your first statement should be the second parameter to CONVERT function.
It's type is not a string, it's type is an valid expression
https://learn.microsoft.com/en-us/sql/t-sql/functions/cast-and-convert-transact-sql
So I would expect that your
CONVERT(DATETIME,:ls_datetime)
would evaluate to
CONVERT(DATETIME, 'ls_datetime')
but it should be
CONVERT(DATETIME, DateTimeColumn)
The error in your second statement could be that you're providing an wrong datetime format.
So please check if your error still occurs when you use this function
https://learn.microsoft.com/en-us/sql/t-sql/statements/set-dateformat-transact-sql
with the correct datetime format you're using
Did any one see this error ??
I'm using Firebird 2.1 and database create statement is getting failed on v.first stored procedure execution.
Error Message:
[869] : There was a problem creating a DBProvider with the following parameters: StoredProcedureName:sel_NextObjectID
2. operating system directive CreateFile failed
3. operating system directive CreateFile failed
Stack Trace
2.at FirebirdSql.Data.FirebirdClient.FbConnectionInternal.Connect()
at FirebirdSql.Data.FirebirdClient.FbConnectionPool.Create()
at FirebirdSql.Data.FirebirdClient.FbConnectionPool.CheckOut()
at FirebirdSql.Data.FirebirdClient.FbConnection.Open()
at FirebirdDBProvider.NewProvider_Internal(String commandText, String connectionString, CommandType commandType)
3 at FirebirdSql.Data.FirebirdClient.FbConnectionInternal.Connect()
at FirebirdSql.Data.FirebirdClient.FbConnectionPool.Create()
at FirebirdSql.Data.FirebirdClient.FbConnectionPool.CheckOut()
at FirebirdSql.Data.FirebirdClient.FbConnection.Open()
at FirebirdDBProvider.NewProvider_Internal(String commandText, String connectionString, CommandType commandType)
You can get this error when you are attempting to connect to a database which does not yet exist.
It is not entirely clear from your post what you mean with 'database create statement is getting failed on v.first stored procedure execution', but I assume you are attempting to create a database and then execute DDL.
To connect to a database, you first need to create it. To create a database you need to use createDatabase first.
Well, deleting all temp file fixed this thing. Found the same issue on firebird too.
1) Make sure your application (on which you're facing this issue) is not running.
2) One Run dialog (Window + R) and type in “%temp%” and click “ok”
3) In the opened folder delete all the files (which can be deleted).
4) Start the application.
Just had same issue, the reason was no free space available on the system drive.