I would like to delete repair / modify buttons from Add or Remove Programs.
I would also like to use WixUI_InstallDir Dialog Set.
This is my code:
<UI>
<UIRef Id="WixUI_InstallDir"/>
</UI>
<Property Id="WIXUI_INSTALLDIR" Value="INSTALLDIR"/>
<Property Id="ARPNOREPAIR" Value="yes" Secure="yes" />
<Property Id="ARPNOMODIFY" Value="yes" Secure="yes" />
But this causes
error LGHT0091 : Duplicate symbol 'Property:ARPNOMODIFY' found
I understand that WixUI_InstallDir defines these properties and the only decision I see is to define my own UI that is similar to WixUI_InstallDir except for these properties.
But is this the only way?
Can I overwrite these properties somehow?
Yes, use setproperty.
<SetProperty Id="ARPNOMODIFY" Value="1" After="InstallValidate" Sequence="execute"/>
Related
I used the below property so i could avoid the add or remove option in the control panel
<Property Id="ARPSYSTEMCOMPONENT" Value="1" />
But i need to make it dynamic .I want to read the value in the registry. If a value mathes my condition i will include this orelse i wont include this line my partial code is as follows
<Property Id="NETFRAMEWORK20">
<RegistrySearch Id="NetFramework20"
Root="HKLM"
Key="Software\Microsoft\NET Framework Setup\NDP\v2.0.50727"
Name="Install"
Type="raw" />
</Property>
//Some Conditon
<Condition Message="I will create the Add or remove option since the softwar i look for s not present">
<![CDATA[Installed OR NETFRAMEWORK20]]>
</Condition>
<Property Id="ARPSYSTEMCOMPONENT" Value="1" />
//or else
Thank in Advance
Try using SetProperty. Means, instead of:
<Property Id="ARPSYSTEMCOMPONENT" Value="1" />
try:
<SetProperty Id="ARPSYSTEMCOMPONENT" After="InstallInitialize" Value="1">
<![CDATA[~~~CONDITION~~~]]>
</SetProperty>
As a side note, I would recommend first, not to hide staff you install from add/remove, and second, use standard .NET framework extension for checking if .NET framework is installed instead of inventing your own method with registry search.
I'm trying to do is:
if registrySearch exist then
set INSTALL_DIR to C:\Program Files\MyCompany\MySoftware
else
set INSTALL_DIR to C:\ProgramData\MyCompany\Folder
Anyone know to do this?
Let say this the registry key you searched.
<Property Id="REGSEARCH">
<RegistrySearch Id="TestReg"
Root="HKLM"
Key="Software\TestKey\TestKey2"
Name="Test"
Type="raw" />
</Property>
This is how to set the property conditionally.
Keep the default value as the value you need to put when the registry does not exist.
<Property Id="INSTALL_DIR" Value="C:\ProgramData\MyCompany\Folder" />
Then set the property value as follows if the registry exists.
<SetProperty Id="INSTALL_DIR" After="AppSearch" Value="C:\Program Files\MyCompany\MySoftware" Sequence="first" >
<![CDATA[REGSEARCH]]>
</SetProperty>
I want to copy some files into a directory in another product's installation tree, but only if that product is installed. So I figured I could set a property based on a registry search to find that product's installation root. Then I could use the property in a condition element on the component element.
Here is my code. For some reason, I am getting an error when the other product is not installed and the registry search comes up empty since the registry key will not be found.
<Property Id="PRODUCTPATH">
<RegistrySearch Id="PRODUCTPATH" Root="HKLM" Key="_MY_KEY_" Name="_MY_NAME_" Type="raw" />
</Property>
<SetProperty Id="PRODUCTBINPATH" Value="[PRODUCTPATH]\BIN" After="AppSearch"/>
<Component Id="CommonDLLs" Guid="_MY_GUID_" Directory="INSTALLLOCATION">
<Condition>PRODUCTPATH</Condition>
<RegistryValue Id="_MY_ID_" Root="HKLM" Key="_MY_KEY_2" Name="Installed" Value="1" Type="integer" KeyPath="yes" />
<CopyFile Id="myfile1.dll" FileId="myfile1.dll" DestinationProperty="PRODUCTPATH" DestinationName="myfile1.dll"/>
<CopyFile Id="myfile2.dll" FileId="myfile2.dll" DestinationProperty="PRODUCTPATH" DestinationName="myfile2.dll"/>
</Component>
Try to use the util:RegistrySearch instead of RegistrySeach
This element comes with Util Extension. Check here if you don't know how to use extensions.
The util:RegistrySearch has an attribute (Result) for only checking if the key exists or not.
It would be like that:
<util:RegistrySearch
Id="PRODUCTPATH"
Variable="PRODUCTPATH"
Root="HKLM"
Key="_MY_KEY_"
Format="raw"
Result="exists">
Actually, all you have to do is add a condition to the SetProperty element like this:
<Property Id="PRODUCTPATH">
<SetProperty Id="PRODUCTBINPATH" Value="[PRODUCTPATH]\BIN" After="AppSearch">PRODUCTPATH</SetProperty>
My program will be installed to a path in registry, which has two different values for single user and all users.
So I'd like to have something like:
<Property Id="MYINSTALLDIR">
if single user, then <RegistrySearch Id='MyRegistry' Type='raw' Root='HKCU' Key='Software\MyApp\Foo' Name='InstallDir' />
else if ALLUSERS, then <RegistrySearch Id='MyRegistry' Type='raw' Root='HKLM' Key='Software\MyApp\Foo' Name='InstallDir' />
</Property>
Is this possible?
Perform the two registry searches to two different properties and then use a SetProperty custom action to assign one of the two properties to the real property based on which one has data and which one has a higher priority ( use conditions to drive the execution ).
Finally, it is working now...
With following snippet in wxs file, ALLUSER=1 or 2 can be passed to msiexec to enable HKLM registry search.
<Property Id="INSTALLDIR1">
<RegistrySearch Id='RegistryCU' Type='raw' Root='HKCU' Key='Software\Foo' Name='InstallDir' />
</Property>
<Property Id="INSTALLDIR2">
<RegistrySearch Id='RegistryLM' Type='raw' Root='HKLM' Key='Software\Foo' Name='InstallDir' />
</Property>
<CustomAction Id="PerUserInstall" Property="InstallDir" Value="[INSTALLDIR1]" Execute="immediate" />
<CustomAction Id="PerMachineInstall" Property="InstallDir" Value="[INSTALLDIR2]" Execute="immediate" />
<InstallExecuteSequence>
<Custom Action="PerUserInstall" After="AppSearch">ALLUSERS="" OR (ALLUSERS=2 AND (NOT Privileged))</Custom>
<Custom Action="PerMachineInstall" After="AppSearch">ALLUSERS=1 OR (ALLUSERS=2 AND Privileged)</Custom>
</InstallExecuteSequence>
In my case, both HKCU and HKLM contain values and they have same priority, so the only way to do is to set property of ALLUSER in command line.
I need to be able to copy a file that exists on the target machines hard-drive based on a registry setting that holds the folder path.
I have been trying to get this going for a day or two and am having difficulty, can anyone help?
Thanks,
B
Try something along these lines:
<Component Id="MyComponent" Guid="E5FF53DE-1739-42c4-BE37-60F810C9CD69">
<Condition>MYTESTDIR</Condition>
<CopyFile Id="fileToCopy.datCopy" SourceName="[MYTESTDIR]fileToCopy.dat" DestinationProperty="WEBSERVICEBINFOLDER" />
</Component>
You can populate MYTESTDIR with a value from the registry using a RegistrySearch.
You can first search your registry for the file as follows:
<Property Id="PROPERTYNAME" Secure="yes">
<RegistrySearch Id="SomeID"
Root="HKLM"
Type="raw"
Key="SOFTWARE\SomeFolder\SomeSubFolder"
Win64="yes"
Name="InstallPath">
<DirectorySearch Id="REQUIREDDIRECTORY" AssignToProperty="yes" Depth="1" Path="THEEXPECTEDPATH">
</DirectorySearch>
</RegistrySearch>
</Property>
Then use a Custom Action to set the file name
<CustomAction Id="SETFILE"
Property="FILE"
Value="[PROPERTYNAME]file.extension" />
and then copy file as described by the previous answer...
<CopyFile Id="fileToCopy.datCopy" SourceName="[FILE]" DestinationProperty="[YOURDESTINATION]" />