I am trying to cmake curlpp using Cmake version 3.4.1 and I get an error in cmake saying: " Error in configuration process [...]". So all I did is in cmake-gui open the curlpp source (version 0.7.3), selected the destination folder and chose mingw. Here is the output in the gui http://pastebin.com/1gKyqd32.
It said Configuring incomplete, errors occurred!
See also "C:/c++/libraries/curlpp_built/CMakeFiles/CMakeOutput.log".
CMakeOutput.log
I setup CMake correctly and I could compile glfw library.
Quoting the relevant part of the output
CMake Error at src/utilspp/CMakeLists.txt:4 (add_subdirectory):
add_subdirectory given source "singleton" which is not an existing
directory.
The project's CMakeLists.txt in src/utilspp is broken.
The bug is already reported in curlpp's issue tracker:
https://github.com/jpbarrette/curlpp/issues/7
You can work around this bug by removing line 4 from src/utilspp/CMakeLists.txt it should contain something like add_subdirectory(singleton). If you are lucky, everything works; but other errors might pop up.
Related
I'm a master student working on my master thesis, which require to extract loudness and pitch data each second.
I did some research and found that loudness-scanner might be able to do that.
https://github.com/jiixyj/loudness-scanner
After installing, I typed in below command, but I kept seeing this command not found message.
MacBook-Air:loudness-scanner jhl$ loudness tag 00.1mp3
-bash: loudness: command not found
I believe it happened because loudness-scanner didn't successfully install on my laptop, so I went back to start installing again, then ran into below error message.
CMake Error at CMakeLists.txt:8 (include):
include could not find load file:
utils
CMake Error at CMakeLists.txt:26 (add_subdirectory):
add_subdirectory given source "ebur128/ebur128" which is not an existing
directory.
CMake Error at CMakeLists.txt:27 (add_subdirectory):
add_subdirectory given source "scanner" which is not an existing directory.
CMake Error at CMakeLists.txt:30 (to_yes_no):
Unknown CMake command "to_yes_no".
-- Configuring incomplete, errors occurred!
I guess I faced this issue because I'm all new to this and some file or program are missing and needed to be installed. But I'm not sure which are missing.
Please kindly help, thank you!
I'm trying to build the Checked-C project which uses CMake, but when I go to generate the makefile CMake gives the following error.
~/checkedc/build$ cmake ../llvm
CMake Error at CMakeLists.txt:57 (project):
Generator
Unix Makefiles
does not support toolset specification, but toolset
host=x64
was specified.
-- Configuring incomplete, errors occurred!
I have CMake version 3.9.1 installed along with GNU Make 4.1, Clang 5, and GCC 7. Anyone able to tell me what this CMake error means?
That section of CMakeLists.txt looks like this:
57 project(LLVM
58 ${cmake_3_0_PROJ_VERSION}
59 ${cmake_3_0_LANGUAGES}
60 C CXX ASM)
I've tried setting C/CXX/ASM but get the same error:
~/checkedc/build$ cmake -DCMAKE_C_COMPILER="clang-5.0" -DCMAKE_CXX_COMPILER="clang-5.0" -DCMAKE_ASM_COMPILER="clang-5.0" ../llvm
CMake Error at CMakeLists.txt:57 (project):
Generator
Unix Makefiles
does not support toolset specification, but toolset
host=x64
was specified.
-- Configuring incomplete, errors occurred!
I'm on Kubuntu 17.10 64bit.
It means that somewhere CMake file the variable CMAKE_GENERATOR_TOOLSET is set to host=x64. This only makes sense for Visual Studio generator so CMake opts to throw an error in this case.
To fix it double check the setup for your OS and generator. If this doesn't help then you'll need to find where this variable is set and remove this line.
I have the same issue - how I fixed it in my case. Indeed, I had copied the setup for cmake from windows then ported to Linux. When you run the first time, it will create in the build directory a file called: CMakeCache.txt. This file keeps some variables set initially for Windows. I removed it, together with all the CMakeFiles directory and rerun the cmake command to generate the project. It was working perfectly, but I had to set the CMAKE_CXX_COMPILER and CMAKE_C_COMPILER variables to the cmake command: -DCMAKE_CXX_COMPILER=/usr/bin/g++ -DCMAKE_C_COMPILER=/usr/bin/gcc
Hope it is working for you too.
I am working on a project on c++ and need to execute a CMakeLists.txt file to run it. I installed cmake, doxygen, cmake-curses-gui and make using sudo. Then I tried running the file.
The following is a part of the cmake code -
if (BUILD_DOC)
find_package(Doxygen)
configure_file(${PROJECT_SOURCE_DIR}/doc/Doxyfile.in
${PROJECT_SOURCE_DIR}/doc/Doxyfile #ONLY)
add_custom_target(${PROJECT_NAME}_doc ALL ${DOXYGEN_EXECUTABLE}
${PROJECT_SOURCE_DIR}/doc/Doxyfile)
endif ()
Here, it gave me an error message saying that
CMake Error at CMakeLists.txt:77 (configure_file): configure_file
Problem configuring file
Just so that you know, line 77 is configure_file(${PROJECT_SOURCE_DIR}/doc/Doxyfile.in .
If I add AND DOXYGEN_FOUND to the if condition, it doesn't execute anything at all which means that it couldn't find a doxygen executable. But as I already told, I already installed doxygen.
I am new to cmake. So, could anyone please help me with this
Edit:
The OS I am using is Ubuntu 16.04
After I put if(DOXYGEN_FOUND) after the command find_package(doxygen) it executed, but I got the same cmake error in line 78 instead of line 77
Also, now since I got enough information from the comments, I just realized that my problem is more towards finding where the Doxyfile.in file lies than configuring the file. Could anyonee help me with it?
The error is clear
configure_file Problem configuring file
CMake's configure_file(<input> <output>) command is used to copy input file to ouput and replacing #VARIABLES# in input by the corresponding value.
configure_file(${PROJECT_SOURCE_DIR}/doc/Doxyfile.in ${PROJECT_SOURCE_DIR}/doc/Doxyfile #ONLY)
You have to find why this process failed:
Make sure ${PROJECT_SOURCE_DIR} contains the correct path to your project, and make sure the file Doxyfile.in is is the right folder (<project dir>/doc)
Make sure content of Doxyfile.in does not contains any syntax error, in particular with #VARIABLES# that needs to be replaced by their CMake value.
Note that this error has nothing to do with Doxygen on your system, and the fact that CMake actually found it or not.
I'm trying to generate Visual Studio 2013 projects files for MathGL 2.3.3 with CMake.
For some reason cmake does not understand my PNG_PNG_INCLUDE_DIR statement.
cmake "-DZLIB_INCLUDE_DIR=c:\users\chenning\projects\zlib-1.2.8\" "-DZLIB_LIBRARY_DEBUG=c:\users\chenning\projects\zlib-1.2.8\zlib.lib" "-DZLIB_LIBRARY_Release=c:\users\chenning\projects\zlib-1.2.8\zlib.lib" "-DPNG_PNG_INCLUDE_DIR=C:\Users\chenning\projects\lpng1620\" "-DPNG_LIBRARY_DEBUG=C:\Users\chenning\projects\lpng1620\projects\vstudio\x64\Debug\libpng16.lib" "-DPNG_LIBRARY_Release=C:\Users\chenning\projects\lpng1620\projects\vstudio\x64\Release\libpng16.lib" .
The Path exists and the variable is really called PNG_PNG_INCLUDE_DIR with two PNG.
cmake is telling me:
-- Found ZLIB: c:\users\chenning\projects\zlib-1.2.8\zlib.lib
-- Could NOT find PNG (missing: PNG_PNG_INCLUDE_DIR)
CMake Error at CMakeLists.txt:341 (message):
Couldn't find PNG library.
-- Configuring incomplete, errors occurred!
See also "C:/Users/chenning/projects/mathgl-2.3.3/CMakeFiles/CMakeOutput.log".
See also "C:/Users/chenning/projects/mathgl-2.3.3/CMakeFiles/CMakeError.log".
When I set the paths with cmake-gui all works fine.
Any ideas what's wrong?
Linux Flavor: Debian (Crunch Bang)
Problem Occurred: When attempting to build cvblobs with the following command
cd ~/cvblob
cmake .
Error:
CMake Error at cvBlob/CMakeLists.txt:20 (find_package):
Found package configuration file:
/usr/local/share/OpenCV/OpenCVConfig.cmake
but it set OpenCV_FOUND to FALSE so package "OpenCV" is considered to be
NOT FOUND.
-- Configuring incomplete, errors occurred!
Well I met a similar problem when I was going with some other open source face detection modules rather than cvblobs.
Actually you will find that before these lines of error-info, there are:
CMake Warning at /usr/local/opencv-2.4.13/cmake/OpenCVConfig.cmake:163 (message):
Found OpenCV Windows Pack but it has not binaries compatible with your configuration.
You should manually point CMake variable OpenCV_DIR to your build of OpenCV library.
Call Stack (most recent call first):
CMakeLists.txt:57 (find_package)
CMake Warning at CMakeLists.txt:57 (find_package):
Found package configuration file:
/usr/local/opencv-2.4.13/cmake/OpenCVConfig.cmake
but it set OpenCV_FOUND to FALSE so package "OpenCV" is considered to be NOT FOUND.
So you may notice that it asks you to manually point out the directory of you build version of OpenCV library.
For me, my source codes are at
/usr/local/opencv-2.4.13/
but I make and install my release build of OpenCV at
/usr/local/opencv-2.4.13/release/
so I use:
cmake -D OpenCV_DIR=/usr/local/opencv-2.4.13/release/ ..
and everything works:)
When I compile a program that use OpenCV lib, vision 2.4.8, occurs the similar error, when I point manually Opencv_DIR path to opencv/build ,visio 3.1.0, error occurred like you.
Then I point Opencv_DIR path to opencv/build whose vision is same to the program used. It works.
One of the reason could be the another OpenCV package in another path, that you had installed before. In my case, I had already installed OpenCV for Python in Anaconda package, and the CMake always wanted to refer me to that package.
I simply added:
set(OpenCV_FOUND 1)
to my CMakeList.txt file, this command simply override the other package you may had installed. The final version of CMakeList file which is working for me would be this:
set( OpenCV_FOUND 1 )
find_package(OpenCV 2.4.13 REQUIRED PATHS "C:/opencv")
set(SOURCE_FILES main.cpp)
add_executable(OpenCV_Test ${SOURCE_FILES})
Note:
1- I am using the CMakeList.txt file for Clion IDE
2- I am using it under windows. Probably you may set the relevant path if you use other OS
3- You need also change the OpenCV version if you use other version