I have server with debian operating system. I installed docker on it and it works fine, as you can see as follow:
root#3053b0461a3c:/# which wget
/usr/bin/wget
root#3053b0461a3c:/#
An ubuntu based container is running.
Then I started a second terminal, connect via ssh to server and type in console
docker ps
But as output I've got the message:
Cannot connect to the Docker daemon. Is the docker daemon running on this host?
Why the docker service is not running?
Unset the environment variable DOCKER_HOST and it should work.
https://github.com/docker/docker/blob/eff810aed688879f67a3730c41d9adce4637470f/docs/installation/ubuntulinux.md
Try unset DOCKER_HOST
In most unix-based (or -like) environments that I've seen there is the concept of environment variables, which can be considered as dynamic configuration. The 2 functions available are:
set which sets to an environment variable a special value
unset which removes an environment variable.
On the case of DOCKER_HOST, docker uses this variable to know whether it should attach to a network host, e.g. tcp://192.137.23.11 or to a local Unix socket.
Related
We have an application which uses SSH to copy artifact from one node to other. While creating the Docker image (Linux Centos 8 based), I have installed the Openssh server and client, when I run the image from Docker command and exec into it, I am successfully able to run the SSH command and I also see the port 22 enabled and listening ( $ lsof -i -P -n | grep LISTEN).
But if I start a POD/Container using the same image in the Kubernetes cluster, I do not see port 22 enabled and listening inside the container. Even if I try to start the sshd from inside the k8s container then it gives me below error:
Redirecting to /bin/systemctl start sshd.service Failed to get D-Bus connection: Operation not permitted.
Is there any way to start the K8s container with SSH enabled?
There are three things to consider:
Like David said in his comment:
I'd redesign your system to use a communication system that's easier
to set up, like with HTTP calls between pods.
If you put a service in front of your deployment, it is not going to relay any SSH connections. So you have to point to the pods directly, which might be pretty inconvenient.
In case you have missed that: you need to declare port 22 in your deployment template.
Please let me know if that helped.
I am trying to create an application for a server that runs in a docker container and can be accessed over the network via an IP address. However, I can't get it to connect with anything other than localhost:port.
I am using Docker for Windows on Windows 10 with Linux Containers.
To keep it simple, I am currently trying to achieve this effect with a simple apache server.
I am using this dockerfile:
FROM ubuntu:12.04
RUN apt-get update
RUN apt-get install -y apache2
ENV APACHE_RUN_USER www-data
ENV APACHE_RUN_GROUP www-data
ENV APACHE_LOG_DIR /var/log/apache2
RUN echo 'Hello, docker' > /var/www/index.html
ENTRYPOINT ["/usr/sbin/apache2"]
CMD ["-D", "FOREGROUND"]
I can build and run it (via docker run -p 8080:80 apache-server), and access the apache server from my local windows machine's webbrowser via localhost:8080. In that case, the "hello docker"-Apache starting page is displayed, as intended.
However, I have not been able to access it using an actual IP address (other than 127.0.0.1, of course).
Addresses I tried are:
The local network address of my computer in my home network
The Subnet Address (10.0.75.0) and Mask (255.255.255.240) in the Docker for Windows Network settings
My public IP Address
None of these have worked.
Ideally, I would like to be able to access the containerized apache server from anywhere within my local network, and very ideally, I would also like to access it from outside the network.
How can I achieve this?
Edit:
I found out a way to connect to the Apache server from my local machine. Using the following Address in a web browser works: http://10.0.75.1:8080/.
If I understand it correctly, that's the subnet address.
However, I still have no idea how I can connect to the Apache-server in the container from another machine in the network. What I am looking for is for an IP address that I can input into a web browser, and that will display the "hello docker" apache-page.
I'm in a team where some of us use docker toolbox and some user docker desktop. We're writing an application that needs to communicate to a docker container in development.
On docker toolbox, I know the docker-machine env command sets the docker host environment variable and I can use that to get the ip of the virtual machine that's running the docker engine. From there I just access the exposed ports.
What's the equivalent way to get that information on docker desktop? (I do not have a machine that has docker desktop, only docker toolbox but I'm writing code that should be able to access the docker container on both)
On windows OS, after installed docker, there is an entry added by docker inside your hosts file (C:\Windows\System32\drivers\etc\hosts), which states the IP as:
Added by Docker Desktop
10.xx.xx.xx host.docker.internal
Below section got added in my /etc/hosts:
# Added by Docker Desktop
192.168.99.1 host.docker.internal
192.168.99.1 gateway.docker.internal
Then I was able to access by adding the port to which the app was bind to.
This command should display the IP
ping -q -c 1 docker.local | sed -En "s/^.*\((.+)\).*$/\1/p"
ipconfig can get you this information as well
First off: I have read the answers to similar questions on SO, but none of them worked.
IMPORTANT NOTE: The answer below is still valid, but maybe jump to the end for an alternative.
The situation:
App with GUI is running in a docker container (CentOS 7.1) under Arch Linux. (machine A)
Machine A has a monitor connected to it.
I want to access this GUI via X11 forwarding on my Arch Linux client machine. (machine B)
What works:
GUI works locally on machine A (with /tmp/.X11-unix being mounted in the Docker container).
X11 forwarding of any app running outside of docker (X11 forwarding is set up and running properly for non-docker usage).
I can even switch the user while remotely logged in, copy the .Xauthority file to the other user and X11 forwarding works as well.
Some setup info:
Docker networking is 'bridged'.
Container can reach host (firewall is open).
DISPLAY variable is set in container (to host-ip-addr:10.0 because of TCP port 6010 where sshd is listening).
Packets to X forward port (6010) are reaching the host from the container (tcpdump checked).
What does not work:
X11 forwarding of the Docker app
Errors:
X11 connection rejected because of wrong authentication.
xterm: Xt error: Can't open display: host-ip-addr:10.0
Things i tried:
starting client ssh with ssh -Y option on machine B
putting "X11ForwardTrusted yes" in ssh_config on machine B
xhost + (so allow any clients to connect) on machine B
putting Host * in ssh_config on machine B
putting X11UseLocalhost no in sshd_config on machine A (to allow non-localhost clients)
Adding the X auth token in the container with xauth add from the login user on machine A
Just copying over the .Xauthority file from a working user into the container
Making shure .Xauthority file has correct permissions and owner
How can i just disable all the X security stuff and get this working?
Or even better: How can i get it working with security?
Is there at least a way to enable extensive debugging to see where exactly the problem is?
Alternative: The first answer below shows how to effectively resolve this issue. However: I would recommend you to look into a different approach all together, namely VNC. I personally switched to a tigerVNC setup that replaces the X11 forwarding and have not looked back. The performance is just leagues above what X11 forwarding delivered for me. There might be some instances where you cannot use VNC for whatever reason, but i would try it first.
The general setup is now as follows:
-VNC server runs on machine A on the host (not inside a docker container).
-Now you just have to figure out how to get a GUI for inside a docker container (which is a much more trivial undertaking).
-If the docker container was started NOT from the VNC environment, the DISPLAY variable maybe needs ajdusting.
Thanks so much #Lazarus535
I found that for me adding the following to my docker command worked:
--volume="$HOME/.Xauthority:/root/.Xauthority:rw"
I found this trick here
EDIT:
As Lazarus pointed out correctly you also have to set the --net=host option to make this work.
Ok, here is the thing:
1) Log in to remote machine
2) Check which display was set with echo $DISPLAY
3) Run xauth list
4) Copy the line corresponding to your DISPLAY
5) Enter your docker container
6) xauth add <the line you copied>*
7) Set DISPLAY with export DISPLAY=<ip-to-host>:<no-of-display>
*so far so good right?
This was nothing new...however here is the twist:
The line printed by xauth list for the login user looks something like this (in my case):
<hostname-of-machine>/unix:<no-of-display> MIT-MAGIC-COOKIE-1 <some number here>
Because i use the bridged docker setup, the X forwarding port is not listening locally, because the sshd is not running in the container. Change the line above to:
<ip-of-host>:<no-of-display> MIT-MAGIC-COOKIE-1 <some number here>
In essence: Remove the /unix part.
<ip-of-host> is the IP address where the sshd is running.
Set the DISPLAY variable as above.
So the error was that the DISPLAY name in the environment variable was not the "same" as the entry in the xauth list / .Xauthority file and the client could therefor not authenticate properly.
I switched back to an untrusted X11 forwarding setting.
The X11UseLocalhost no setting in the sshd_config file however is important, because the incomming connection will come from a "different" machine (the docker container).
This works in any scenario.
Install xhost if you don't have it. Then, in bash,
export DISPLAY=:0.0
xhost +local:docker
After this run your docker run command (or whatever docker command you are running) with -e DISPLAY=$DISPLAY
It works usually via https://stackoverflow.com/a/61060528/429476
But if you are running docker with a different user than the one used for ssh -X into the server with; then copying the Xauthority only helped along with volume mapping the file.
Example - I sshed into the server with alex user.Then ran docker after su -root and got this error
X11 connection rejected because of wrong authentication.
After copying the .XAuthoirty file and mapping it like https://stackoverflow.com/a/51209546/429476 made it work
cp /home/alex/.Xauthority .
docker run -it --network=host --env DISPLAY=$DISPLAY --privileged \
--volume="$HOME/.Xauthority:/root/.Xauthority:rw" \
-v /tmp/.X11-unix:/tmp/.X11-unix --rm <dockerimage>
More details on wiring here https://unix.stackexchange.com/a/604284/121634
Some clarifying remarks. Host is A, local machine is B
Ive edited this post to note things that I think should work in theory but haven't been tested, vs things I know to work
Running docker non-interactively
If your docker is running not interactively and running sshd, you can use jumphosts or proxycommand and specify the x11 client to run. You should NOT volume share your Xauthority file with the container, and sharing -e DISPLAY likely has no effect on future ssh sessions
Since you essentially have two sshd servers, either of the following should work out of the box
if you have openssh-client greater than version 7.3, you can use the following command
ssh -X -J user-on-host#hostmachine,user-on-docker#dockercontainer xeyes
If your openssh client is older, the syntax is instead
(google says the -X is not needed in the proxy command, but I am suspicious)
ssh -X -o ProxyCommand="ssh -W %h:%p user-on-host#hostmachine" user-on-docker#dockermachine xeyes
Or ssh -X into host, then ssh -X into docker.
In either of the above cases, you should NOT share .Xauthority with the container
Running docker interactively from within the ssh session
The easiest way to get this done is to set --net=host and X11UseLocalhost yse.
If your docker is running sshd, you can open a second ssh -X session on your local machine and use the jumphost method as above.
If you start it in the ssh session, you can either -e DISPLAY=$DISPLAY or export it when you're in. You might have to export it if you attach to an exiting container where this line wasn't used.
Use these docker args for --net host and x11uselocalhost yes
ssh -X to host
-e DISPLAY=$DISPLAY
-v $HOME/.Xauthority:/home/same-as-dash-u-user/.Xauthority
-u user
What follows is explanation of how everything works and other approaches to try
About Xauthority
ssh -X/-Y set up a session key in the hosts Xauthority file, and then sets up a listen port on which it places an x11 proxy that uses the session key, and converts it to be compatible with the key on your local machine. By design, the .Xauthority keys will be different between your local machine and the host machine. If you use jumphosts/proxycommand the keys between the host and the container will yet again be different from each other. If you instead use ssh tunnels or direct X11 connection, you will have to share the host Xauthority with the container, in the case of sharing .Xauthority with the container, you can only have one active session per user, since new sessions will invalidate the previous ones by modifying the hosts .Xauthority such that it only works with that session's ssh x11 proxy
X11UserLocalhost no theory##
Even Though X11UseLocalhost no causes the x server to listen on the wildcard address, With --net host I could not redirect the container display to localhost:X.Y where x and why are from the host $DISPLAY
X11UseLocalhost yes is the easy way
If you choose X11UseLocalhost yes the DISPLAY variable on the host becomes localhost:X:Y, which causes the ssh x11 proxy to listen only on localhost port x.
If X11UseLocalhost is no, the DISPLAY variable on the host becomes the host's hostname:X:Y, which causes the xerver to listen on 0.0.0.0:6000+X and causes xclients to reach out over the network to the hostname specified.
this is theoretical, I don't yet have access to docker on a remote host to test this
But this is the easy way. We bypass that by redirecting the DISPLAY variable to always be localhost, and do docker port mapping to move the data from localhost:X+1.Y on the container, to localhost:X.Y on the host, where ssh is waiting to forward x traffic back to the local machine. The +1 makes us agnostic to running either --net=host or --net=bridge
setting up container ports requires specifying expose in the dockerfile and publishing the ports with the -p command.
Setting everything up manually without ssh -X
This works only with --net host. This approach works without xauth because we are directly piping to your unix domain socket on the local machine
ssh to host without -X
ssh -R6010:localhost:6010 user#host
start docker with -e DISPLAY=localhost:10.1 or export inside
in another terminal on local machine
socat -d -d TCP-LISTEN:6010,fork UNIX-CONNECT:/tmp/.X11-unix/X0
In original terminal run xclients
if container is net --bridged and you can't use docker ports, enable sshd on the container and use the jumphosts method
I have used these instructions for Running Gui Apps with Docker to create images that allow me to launch GUI based applications.
It all works flawlessly when running Docker on the same machine, but it stops working when running it on a remote host.
Locally, I can run
docker --rm --ti -e DISPLAY -e <X tmp> <image_name> xclock
And I can get xclock running on my host machine.
When connecting remotely to a host with XForwarding, I am able to run X applications that show up on my local X Server, as anyone would expect.
However if in the remote host I try to run the above docker command, it fails to connect to the DISPLAY (usually localhost:10.0)
I think the problem is that the XForwarding is setup on the localhost interface of the remote host.
So the docker host has no way to connect to DISPLAY=localhost:10.0 because that localhost means the remote host, unreachable from docker itself.
Can anyone suggest an elegant way to solve this?
Regards
Alessandro
EDIT1:
One possible way I guess is to use socat to forward the remote /tmp/.X11-unix to the local machine. This way I would not need to use port forwarding.
It also looks like openssh 6.7 will natively support unix socket forwarding.
When running X applications through SSH (ssh -X), you are not using the /tmp/.X11-unix socket to communicate with the X server. You are rather using a tunnel through SSH reached via "localhost:10.0".
In order to get this to work, you need to make sure the SSH server supports X connections to the external address by setting
X11UseLocalhost no
in /etc/ssh/sshd_config.
Then $DISPLAY inside the container should be set to the IP address of the Docker host computer on the docker interface - typically 172.17.0.1. So $DISPLAY will then be 172.17.0.1:10
You need to add the X authentication token inside the docker container with "xauth add" (see here)
If there is any firewall on the Docker host computer, you will have to open up the TCP ports related to this tunnel. Typically you will have to run something like
ufw allow from 172.17.0.0/16 to any port $TCPPORT proto tcp
if you use ufw.
Then it should work. I hope it helps. See also my other answer here https://stackoverflow.com/a/48235281/5744809 for more details.