SQL0802 Data conversion or data mapping error
The fields not being CAST are decimals. The fields I am trying to CAST are strings.
I have tried different variations or CAST and CONVERT on this case expression. I'm fairly certain this syntax is correct. I am still getting the error though.
CASE WHEN cpssn=amssn THEN amfnam||amlnam
WHEN cpssn=CAST(maassn as DECIMAL(9)) THEN maafnm||maalnm
WHEN cpssn=CAST(mpssno as DECIMAL(9)) THEN mppfnm||mpplnm
END as Name
One brute force method uses translate():
(CASE WHEN cpssn = amssn THEN amfnam||amlnam
WHEN length(translate(massn, 'a0123456789', 'a')) > 0 THEN NULL
WHEN length(translate(mpssno, 'a0123456789', 'a')) > 0 THEN NULL
WHEN cpssn = CAST(maassn as DECIMAL(9)) THEN maafnm||maalnm
WHEN cpssn = CAST(mpssno as DECIMAL(9)) THEN mppfnm||mpplnm
END) as Name
Note: I am not intimately familiar with translate() in DB2. The above uses an Oracle convention for removing characters, because the third argument cannot be '' in Oracle. It should still work in DB2.
This should work by first guaranteeing that the only characters in the strings are digits. case is processed in sequential order, so the digit checks should be done before the conversion.
Related
CASE
WHEN code IN ('FJS354', 'JDF334')
THEN 'Lower_form'
ELSE 0
END AS format
This returns an error in Redshift
invalid input syntax for integer: "Lower_form"
I know if I change 'Lower_form' to an integer it will work however I want this column to be a string. Is there a way to do this?
I want this column to be a string.
All branches of a case expression must return the same datatype. You are giving two literal values whose datatype is not the same (string vs integer): the database makes the decision to turn them both to integers - which is not what you want.
Rremove the ambiguity by being explicit about the datatype you want to return. That is, make this literal 0 a string:
CASE WHEN code in ('FJS354','JDF334')
THEN 'Lower_form'
ELSE '0'
END as format
I need to checking a column where numeric or not in SQL Server 2012.
This my case code.
CASE
WHEN ISNUMERIC(CUST_TELE) = 1
THEN CUST_TELE
ELSE NULL
END AS CUSTOMER_CONTACT_NO
But when the '78603D99' value is reached, it returns 1 which means SQL Server considered this string as numeric.
Why is that?
How to avoid this kind of issues?
Unfortunately, the ISNUMERIC() function in SQL Server has many quirks. It's not exactly buggy, but it rarely does what people expect it to when they first use it.
However, since you're using SQL Server 2012 you can use the TRY_PARSE() function which will do what you want.
This returns NULL:
SELECT TRY_PARSE('7860D399' AS int)
This returns 7860399
SELECT TRY_PARSE('7860399' AS int)
https://msdn.microsoft.com/en-us/library/hh213126.aspx
Obviously, this works for datatypes other than INT as well. You say you want to check that a value is numeric, but I think you mean INT.
Although try_convert() or try_parse() works for a built-in type, it might not do exactly what you want. For instance, it might allow decimal points, negative signs, and limit the length of digits.
Also, isnumeric() is going to recognize negative numbers, decimals, and exponential notation.
If you want to test a string only for digits, then you can use not like logic:
(CASE WHEN CUST_TELE NOT LIKE '%[^0-9]%'
THEN CUST_TELE
END) AS CUSTOMER_CONTACT_NO
This simply says that CUST_TELE contains no characters that are not digits.
Nothing substantive to add but a couple warnings.
1) ISNUMERIC() won't catch blanks but they will break numeric conversions.
2) If there is a single non-numeric character in the field and you use REPLACE to get rid of it you still need to handle the blank (usually with a CASE statement).
For instance if the field contains a single '-' character and you use this:
cast(REPLACE(myField, '-', '') as decimal(20,4)) myNumField
it will fail and you'll need to use something like this:
CASE WHEN myField IN ('','-') THEN NULL ELSE cast(REPLACE(myField, '-', '') as decimal(20,4)) END myNumField
SELECT logicalTime, traceValue, unitType, entName
FROM vwSimProjAgentTrace
WHERE valueType = 10
AND agentName ='AtisMesafesi'
AND ( entName = 'Hawk-1')
AND simName IN ('TipSenaryo1_0')
AND logicalTime IN (
SELECT logicalTime
FROM vwSimProjAgentTrace
WHERE valueType = 10 AND agentName ='AtisIrtifasi'
AND ( entName = 'Hawk-1')
AND simName IN ('TipSenaryo1_0')
AND CONVERT(FLOAT , traceValue) > 123
) ORDER BY simName, logicalTime
This is my sql command and table is a view table...
each time i put "convert(float...) part " i get
Msg 8114, Level 16, State 5, Line 1
Error converting data type nvarchar to float.
this error...
One (or more) of the rows has data in the traceValue field that cannot be converted to a float.
Make sure you've used the right combination of dots and commas to signal floating point values, as well as making sure you don't have pure invalid data (text for instance) in that field.
You can try this SQL to find the invalid rows, but there might be cases it won't handle:
SELECT * FROM vwSimProjAgentTrace WHERE NOT ISNUMERIC(traceValue)
You can find the documentation of ISNUMERIC here.
If you look in BoL (books online) at the convert command, you see that a nvarchar conversion to float is an implicit conversion. This means that only "float"-able values can be converted into a float. So, every numeric value (that is within the float range) can be converted. A non-numeric value can not be converted, which is quite logical.
Probably you have some non numeric values in your column. You might see them when you run your query without the convert. Look for something like comma vs dot. In a test scenario a comma instead of a dot gave me some problems.
For an example of isnumeric, look at this sqlfiddle
Searched and searched on SO and can't figure it out
Tried CASTING each field as FLOAT to no avail, convert didn't get me any further
How can I get the below case clause to return the value stated in the THEN section?
Error:
Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to float.
section of my SQL query that makes it error:
When cust_trendd_w_costsv.terms_code like '%[%]%' and (prod.dbo.BTYS2012.average_days_pay) - (substring(cust_trendd_w_costsv.terms_code,3,2)) <= 5 THEN prod.dbo.cust_trendd_w_costsv.terms_code
average_days_pay = float
terms_code = char
Cheers!
Try to use ISNUMERIC to handle strings which can't be converted:
When cust_trendd_w_costsv.terms_code like '%[%]%'
and (prod.dbo.BTYS2012.average_days_pay) -
(case when isnumeric(substring(cust_trendd_w_costsv.terms_code,3,2))=1
then cast(substring(cust_trendd_w_costsv.terms_code,3,2) as float)
else 0
end)
<= 5 THEN prod.dbo.cust_trendd_w_costsv.terms_code
The issue that you're having is that you're specifically searching for strings that contain a % character, and then converting them (implicitly or explicitly) to float.
But strings containing % signs can't be converted to float whilst they still have a % in them. This also produces an error:
select CONVERT(float,'12.5%')
If you're wanting to convert to float, you'll need to remove the % sign first, something like:
CONVERT(float,REPLACE(terms_code,'%',''))
will just eliminate it. I'm not sure if there are any other characters in your terms_code column that may also trip it up.
You also need to be aware that SQL Server can quite aggressively re-order operations and so may attempt the above conversion on other strings in terms_code, even those not containing %. If that's the source of your error, then you need to prevent this aggressive re-ordering. Provided there are no aggregates involved, a CASE expression can usually avoid the worst of the issues - make sure that all strings that you don't want to deal with are eliminated by earlier WHEN clauses before you attempt your conversion
If your are sure that Substring Part returns a numeric value, You can Cast The substring(....) to Float :
.....and (prod.dbo.BTYS2012.average_days_pay) - (CAST(substring(cust_trendd_w_costsv.terms_code,3,2)) as float ) <= 5 ....
I am using in insert statement to convert BDE table (source) to a Firebird table (destination) using IB Datapump. So the INSERT statement is fed by source table values via parameters. One of the source field parameters is alphanum (SOURCECHAR10 char(10), holds mostly integers and needs to be converted to integer in the (integer type) destination column NEWINTFLD. If SOURCECHAR10 is not numeric, I want to assign 0 to NEWINTFLD.
I use IIF and SIMILAR to to test whether the string is numeric, and assign 0 if not numeric as follows:
INSERT INTO "DEST_TABLE" (......, "NEWINTFLD",.....)
VALUES(..., IIF( :"SOURCECHAR10" SIMILAR TO '[[:DIGIT:]]*', :"SOURCECHAR10", 0),..)
For every non numeric string however, I still get conversion errors (DSQL error code = -303).
I tested with only constants in the IIF result fields like SOURCECHAR10" SIMILAR TO '[[:DIGIT:]]*', 1, 0) and that works fine so somehow the :SOURCECHAR10 in the true result field of the IIF generates the error.
Any ideas how to get around this?
When your query is executed, the parser will notice that second use of :"SOURCECHAR10" is used in a place where an integer is expected. Therefor it will always convert the contents of :SOURCECHAR10 into an integer for that position, even though it is not used if the string is non-integer.
In reality Firebird does not use :"SOURCECHAR10" as parameters, but your connection library will convert it to two separate parameter placeholders ? and the type of the second placeholder will be INTEGER. So the conversion happens before the actual query is executed.
The solution is probably (I didn't test it, might contain syntax errors) to use something like (NOTE: see second example for correct solution):
CASE
WHEN :"SOURCECHAR10" SIMILAR TO '[[:DIGIT:]]*'
THEN CAST(:"SOURCECHAR10" AS INTEGER)
ELSE 0
END
This doesn't work as this is interpreted as a cast of the parameter itself, see CAST() item 'Casting input fields'
If this does not work, you could also attempt to add an explicit cast to VARCHAR around :"SOURCECHAR10" to make sure the parameter is correctly identified as being VARCHAR:
CASE
WHEN :"SOURCECHAR10" SIMILAR TO '[[:DIGIT:]]*'
THEN CAST(CAST(:"SOURCECHAR10" AS VARCHAR(10) AS INTEGER)
ELSE 0
END
Here the inner cast is applied to the parameter itself, the outer cast is applied when the CASE expression is evaluated to true