I was trying to make apache mysql php and phpmyadmin running together and following this instructions https://echo.co/blog/os-x-1010-yosemite-local-development-environment-apache-php-and-mysql-homebrew I made a big mistake.
When I run on the terminal apachectl configtest or apachectl start, etc It looking into /usr/local/etc/apache2/2.2/httpd.conf and I want to restore to the original location.
I have my apache runnning http://localhost and is 2.4 because when I try http://localhost/test.php ( < ? php phpinfo() ?> ) and it says "Apache Version Apache/2.4.16 (Unix) PHP/5.5.29" but when I want to see the version apachectl -v it says is 2.2 and I know that I had per default 2.4 I want to restore all the changes that I made on apache and get rid of what I did with the other tutorial.
I don't mind if I cant use apachectl anymore but I want to know how can I continue control de apache 2.4 that is on the mac start,restart and stop commands.
I found the solution doing apachectl -V go to the root of config placed on /Cellar and paste the httpd.conf with the original.
Related
Linux Mint 18
Apache2 server
MYSQL Server
Hello! Does anyone have a moment to advise me?
Here's my problem in brief: I am trying to configure phpMyAdmin on a Linux Mint 18 computer, but when I try to view http://localhost/phpmyadmin/, I get a "phpMyAdmin demo server" screen.
Details:
The phpMyAdmin web page begins with an addJSON statement, and echoes this message:
'You are using the demo server. You can do anything here, but please do not change root, debian-sys-maint and pma users'
I understand I am viewing some sort of demonstration page for phpMyAdmin, but I would rather view the actual, familiar phpMyAdmin administration page.
Do I need to edit the Apache2.conf file? Or something else? Thank you very much for your time.
Eric
i had this problem with ubuntu 16.04
fix
1# Remove phpmyadmin completely
sudo apt-get remove phpmyadmin
2# Install phpmyadmin with this command
sudo apt-get install phpmyadmin apache2-utils
3# add phpmyadmin to the apache configuration
sudo nano /etc/apache2/apache2.conf
And put below line to end of the file
Include /etc/phpmyadmin/apache.conf
4# restart apache2
sudo systemctl restart apache2
or
sudo service apache2 restart
I had the same problem, but my error was because I commented the Handler in php.ini
<FilesMatch \.php$>
SetHandler application/x-httpd-php
</FilesMatch>
I just enable php on apache and start work normal
a2enmod php7.3
I had to disable mpm_event because it was causing some comflict
a2dismod mpm_event
Perhaps PHP code is not being executed, instead code shows on the page or Apache shows php code instead of executing may help.
Linux Mint is similar to Ubuntu/Debian, so you need the libapache2-mod-php5 package installed (assuming you've used the package manager to install the rest of your PHP/Apache stack): sudo apt-get install php5 libapache2-mod-php5.
You can test this further by adding a file (called test.php or phpinfo.php or whatever else suits you) in the main phpMyAdmin folder with the content <?php phpinfo(); ?> -- then try to load that file directly and see if you get a long list of system status or simply the contents of the file displayed. The main reason to put it in the phpMyAdmin folder is that your Apache configuration might handle different folders differently, this is the simplest way to test what happens on that particular folder.
Before I could use terminal to start Apache service as:
sudo apachectl start
But recently it doesn't work, even after I restart my PC. Instead, I can use XAMPP to start Apache easily. Who can tell me why the terminal doesn't work at all?
Besides, since I'm a beginner with command line, I know the statement
ps aux | grep httpd
can show if apache is running. But I don't know the exact meaning of each field, like:
yy 1708 0.0 0.0 2432772 604 s000 R+ 8:05PM 0:00.00 grep httpd
what does those numbers or characters mean? Is anyone can help? Thanks!
Try sudo apachectl configtest to check that nothing prevents Apache from starting like a syntax error in one of its config files.
If it can't start, then it must throw an error in its log, check in var/log/, ususally there's a apache2 or httpd folder there, containing error and access logs.
The numbers of the ps aux command are explained at the top of each column when you run this command without any grep pipe (which strips the header, because nothing matches httpd in the first line).
More info here: https://www.wikiwand.com/en/Ps_(Unix).
In your case, httpd is not obviously not running since you only get your own ps command as a result so the numbers don't really matter ;-)
Setting up a development environment with Ubuntu 14.04 running in VirtualBox, following this guide: http://klau.si/dev
After installing phpmyadmin, it seems I should be able to access it at http://localhost/phpmyadmin but apache returns a Not Found error. Did this guide leave out a configuration step somewhere? I have already tried restarting the apache service.
There is no phpmyadmin.conf file in apache2/sites-enabled or apache2/sites-available, is this required?
If so, where can I find these files?
using 127.0.0.1 instead of localhost returns the same error. The default apache page at http://localhost works just fine.
the console in the browser shows nothing of value, simply Not Found.
I have also tried rerunning the install script with dpkg-reconfigure -plow phpmyadmin
This issue was resolved thanks to this guide: https://help.ubuntu.com/community/ApacheMySQLPHP#Troubleshooting_Phpmyadmin_.26_mysql-workbench by adding
Include /etc/phpmyadmin/apache.conf
...to the /etc/apache2/apache2.conf file and restarting the service.
Try this
sudo ln -s /etc/phpmyadmin/apache.conf /etc/apache2/conf-available/phpmyadmin.conf
sudo a2enconf phpmyadmin.conf
sudo systemctl restart apache2
sudo dpkg-reconfigure -plow phpmyadmin
Select No when asked to reconfigure the database. Then when asked to choose apache2, make sure to hit space while [ ] apache2 is highlighted. An asterisk should appear between the brackets. Then hit Enter. Phpmyadmin should reconfigure and now http://localhost/phpmyadmin should work. for further detail https://www.howtoforge.com/installing-apache2-with-php5-and-mysql-support-on-ubuntu-13.04-lamp
The easiest way to do in ubuntu (I tested in ubuntu-20.04):
Step 1. Open the file:
sudo nano /etc/apache2/apache2.conf
Step 2: Add the following line at the end of file:
Include /etc/phpmyadmin/apache.conf
Step 3: Restart apache2:
sudo systemctl restart apache2.service
Create a link in /var/www like this:
sudo ln -s /usr/share/phpmyadmin /var/www/
Note: since 14.04 you may want to use /var/www/html/ instead of /var/www/
If that's not working for you, you need to include PHPMyAdmin inside apache configuration.
Open apache.conf using your favorite editor, mine is nano :)
sudo nano /etc/apache2/apache2.conf
Then add the following line:
Include /etc/phpmyadmin/apache.conf
For Ubuntu 15.04 and 16.04
sudo ln -s /etc/phpmyadmin/apache.conf /etc/apache2/conf-available/phpmyadmin.conf
sudo a2enconf phpmyadmin.conf
sudo service apache2 reload
Finally I got the solution
sudo ln -s /etc/phpmyadmin/apache.conf /etc/apache2/conf-available/phpmyadmin.conf
sudo a2enconf phpmyadmin
sudo service apache2 reload
More about
https://askubuntu.com/questions/55280/phpmyadmin-is-not-working-after-i-installed-it
Create a link in /var/www/html like this to fix the error:
sudo ln -s /usr/share/phpmyadmin /var/www/html
For anyone still running into issues with this- check that you're actually using apache! I knocked my head against this for 20 minutes or so before I remembered...I use NginX on this server...=). #john-smith, this one's for you buddy.
To get it working on nginx, all you should have to do is create a sim link and restart php:
sudo ln -s /usr/share/phpmyadmin /var/www/html
Note that for you, it may be /var/www/ and not /var/www/html, depending on your dir structure.
sudo ln -s /etc/phpmyadmin/apache.conf /etc/apache2/conf-available/phpmyadmin.conf
sudo ln -s /usr/share/phpmyadmin /var/www/html/phpmyadmin
sudo service apache2 restart
Run above commands issue will be resolved.
Run the following command in terminal:
sudo ln -s /usr/share/phpmyadmin /var/www/html/
It seems like sometime during the second half of 2018 many php packages such as php-mysql and phpmyadmin were removed or changed. I faced that same problem too. So you'll have to download it from another source or find out the new packages
You will need to configure your apache2.conf to make phpMyAdmin works.
sudo nano /etc/apache2/apache2.conf
Then add the following line to the end of the file.
Include /etc/phpmyadmin/apache.conf
Then restart apache
sudo service apache2 restart
I had the same issue where these fixes didn't work.
I'm on Ubuntu 20.04 using hestiaCP with Nginx.
Today after adding
Include /etc/phpmyadmin/apache.conf
into both Apache and Nginx, Nginx failed to restart. It was having an issue with "proxy_buffers" value.
Yesterday I had to modify the Nginx config to add and increase these values so Magento 2.4 would run. Today I altered "proxy_buffers" again
proxy_buffers 3 64k;
proxy_buffer_size 128k;
proxy_busy_buffers_size 128k;
After the second alteration and the removal of "Include /etc/phpmyadmin/apache.conf" from both Apache and Nginx, Magento 2.4 and PHPMyAdmin are working as expected.
I didn't try Rashmi Jain's symlink answer. It seems like it would work. But if it doesn't work for you, perhaps try this.
I just created the file `/etc/apache2/conf-available/phpmyadmin.conf' and added this line to it:
Include /etc/phpmyadmin/apache.conf
(rather than putting it into /etc/apache2/apache2.conf as in Anonymous Man's answer)
Then:
sudo a2enconf phpmyadmin
sudo systemctl reload apache2
I had the same problem after installing mysql, apache2, php and finally phpmyadmin after each other. In my case it was solved by restarting apache2 (no need to update any configuration file):
sudo systemctl restart apache2
#John smith, I was facing the same issue of not being able to access phpmyadmin for 3 days, I found the solution.
-- Get xampp, check this tutorial https://youtu.be/VHfij95yOpo
-- Run this command before starting xampp app
sudo /etc/init.d/apache2 stop
sudo service mysql stop
That's it, it worked for me
first go to the location of phpmyadmin via terminal then type this
code php -S localhost:8001
First check PhpMyAdmin is install or not. If it is installed then search PhpMyadmin folder. After search cut and paste that folder in location Computer->var->www->html->paste folder. Open browser and type localhost/phpMyAdmin and login using username and password.
If you are having this problem in 2019, go to your 000-default.conf file, by typing this subl /etc/apache2/sites-enabled/000-default.conf (in your terminal to open the file in sublime editor)
When the file loads, locate "The ServerName directive sets the request scheme" and place this "Include /etc/phpmyadmin/apache.conf" on top .
Then restart your apache with the command...service apache2 restart That will certainly fix the issue. Hope it helps!
I have just today upgraded to Yosemite. I've not had a mac long. But with the update my localhost doesn't work. Chrome returns This webpage is not available. I've tried
sudo apachectl start to try and get it back but no luck. I'm a new mac user and haven't had to undergo an OS update, so not really sure where to start.
I've stolen the following from
https://github.com/liip/php-osx/issues/75 and http://php-osx.liip.ch/#uninstall
1. reinstall PHP
homebrew helps with this
brew update
brew upgrade
brew uninstall --force php54
brew unlink php54
brew uninstall --force php55
brew unlink php55
rm -rf /usr/local/php5*
brew install php55
2. where is libphp5.so?
please comment out the existing 'LoadModule php5_module' in /private/etc/apache2/httpd.conf and add this
LoadModule php5_module /path/to/lib/libphp5.so
3. delete +php-osx.conf and +entropy-php.conf
delete the files
+php-osx.conf
+entropy-php.conf
in
/etc/apache2/other
4. testing if everything works
try to start apache with
sudo apachectl start
did you try
apachectl configtest
to see if it really is running?
I've just found this:
http://macosx.com/threads/apache-wont-start-up.299851/
-> summary
'Apache couldn't find a certain log file'
cd /private/var/log
sudo mkdir apache2
I'm just upgraded my mac into yosemite, and boom my apache isn't working. i follow the instruction from here, and my localhost is back to normal again, here the simple steps i did.
Open your httpd.conf located on /etc/apache2, please open with sudo like sudo vi httpd.conf (i'm using vim to open the file, for most simple steps)
Find the line with this value LoadModule php5_module libexec/apache2/libphp5.so, you will found it marked with #, so delete the hash (#) and save the file by press ESC => type :wq (command for write and quit)
Restart your apache by using command sudo apachectl restart
See your localhost on browser
*tips:
For fast on searching you can press ESC and then /, and type php5_module => ENTER
You can also remove the mark (hash) fot these line, if you need to enable rewrite_module to activate mod_rewrite and vhost_alias_module for virtual-host on your machine.
*warning
If your MOD_REWRITE still doesn't work, in order to use .htaccess try to check this.
Find the section and change
AllowOverride None to AllowOverride All
Solution in Jan 2016 for El Capitan
None of the other answers worked for me.
run sudo apachectl configtest
I got an error:
AH00526: Syntax error on line 20 of /private/etc/apache2/extra/httpd-mpm.conf: Invalid command 'LockFile', perhaps misspelled or defined by a module not included in the server configuration
That lead me to https://apple.stackexchange.com/questions/211015/el-capitan-apache-error-message-ah00526 and the solution
Edit the file /etc/apache2/extra/httpd-mpm.conf to remove this part:
#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
<IfModule !mpm_winnt_module>
<IfModule !mpm_netware_module>
LockFile "/private/var/log/apache2/accept.lock"
</IfModule>
</IfModule>
I commented that out, rolled back all the other changes(except brew update/upgrade).
My problem here was the httpd.conf file and this line
Include /private/etc/apache2/other/*.conf
Where it tried to load the osx version of PHP I had. I needed to change it to my PHP version
Include /private/etc/apache2/other/php5.conf
Permissions seem to be an issue now however.
I just did:
brew update
brew upgrade
and
sudo apachectl restart
..."It works!"
I ran into this too after upgrading Yosemite recently. Neither localhost nor 127.0.0.1 would resolve. Apparently Yosemite activated or reconfigured a Firewall (System Preferences > Security & Privacy > Firewall [tab]).
I resolved the issue by accessing the Firewall Options and unchecking the box labelled 'Block all incoming connections'. Probably more importantly - that caused the 'Enable stealth mode' option below it to be switched off. That, stealth mode, was likely the culprit.
After saving above changes localhost & 127.0.0.1 worked fine for me again.
I have just made a new setup of Fedora 20 on my laptop, earlier I was using Linux Mint, running NGINX / PHP-FPM.
I have been trying to run php scripts that write files or upload files to server, but I am unable to do so, everything else seems to work fine.
I have already tried the obvious "chmod 777" and "chown -R nginx", etc. but the problem still persists.
Got it working with SELinux enabled,
Last command was:
setsebool -P httpd_can_network_connect 1
Referred to this blog: http://blog.frag-gustav.de/2013/07/21/nginx-selinux-me-mad/