I've this value: 1.234.567,00 $ and i will update this in another table, with the following code:
UPDATE
TABLETWO
SET
USERDEFINED = CAST(CAST(INSERTED.NETAMOUNT AS VARCHAR) + ' ' + INSERTED.CURRENCY AS VARCHAR(128)),
FROM
INSERTED
WHERE
INSERTED.TABLEID = XDFDOCVECTOR.TABLEID
The output is 1.23467e+006 (in Webview) and in the Database 1234667 ?
The correct output must be: 1.234.567,00 (in webciew) and 1234567 in database
Related
I have a table in which there is a column name associated_ids with datatype as varchar2(4000). It contains a value and i need to append the new value with existing value. Using below update query:
update ncl_getafix.service_graph
set Associated_ids = Associated_ids + ',' + '95d4980b-d12c-4854-97c6-bd9854f8f003'
where SERVICE_ID='075d7a58-7fad-4e1d-9822-83a2fa1a0d05';
I am getting below error:
Error starting at line : 5 in command - update
ncl_getafix.service_graph set
Associated_ids=Associated_ids+','+'95d4980b-d12c-4854-97c6-bd9854f8f003'
where SERVICE_ID='075d7a58-7fad-4e1d-9822-83a2fa1a0d05'
Error report - ORA-01722: invalid number.
Can anyone help to debug this.
You need to use concat operator || not + as follows:
update ncl_getafix.service_graph
set Associated_ids = Associated_ids || ',' || '95d4980b-d12c-4854-97c6-bd9854f8f003'
where SERVICE_ID='075d7a58-7fad-4e1d-9822-83a2fa1a0d05';
i found the answer.
Use || symbol instead of + in query
So i have a requirement where I need to read through records of all records of a file and insert them into another file if they meet a set of rules which are described in another table as shown below..
A record after it has been read from the first file has to meet all the sequences of at least one Rule to make it eligible to be written into the Second table.
For example once a record is read from CAR file, the rules below have to be checked till all sequences of atleast one rule set is satisfied. For this I was planning to Create a dynamic SQL program something of this sort. But this does not work as Prepared SQL does not support host variables.
If any body can suggest or provide any guidance on how to create SQL statemtns dynamically and check if records satisfy the required rules for them to be entered into the second file, it would be great
So basically what I am looking for is once I select a field from a table, how do I store it somehere to do further validation and checking.
Update
:
Based on the intelligent advice from Danny117, I have come up with the below code:
H Option(*NoDebugIO:*SrcStmt)
D RULEDS E DS EXTNAME(RULESTABLE)
D MAXRUL S 1 0
D MAXSEQ S 1 0
D STMT S 512
D WHERESTMT S 512 INZ('')
D FullSqlStmt S 512 INZ('')
D RULINDEX S 1 0 INZ(1)
D SEQINDEX S 1 0 INZ(1)
D APOS C CONST('''')
/Free
Exec SQL SELECT MAX(RULENO)INTO :MAXRUL FROM RULESTABLE;
Exec SQL DECLARE RULCRS CURSOR FOR SELECT * FROM RULESTABLE;
Exec SQL OPEN RULCRS;
Exec SQL FETCH RULCRS INTO :RULEDS;
DoW (Sqlcod = 0 AND RULINDEX <= MAXRUL);
Exec SQL SELECT MAX(SEQNO) INTO :MAXSEQ FROM RULESTABLE
WHERE RULENO=:RULINDEX ;
DoW (SEQINDEX <= MAXSEQ);
If (Position <> '');
Field = 'SUBSTR('+%Trim(Field)+','+%Trim(Position)+','
+'1'+')';
EndIf;
WhereStmt = %Trim(WhereStmt) + ' ' + %Trim(field)+ ' ' +
%Trim(condition) + ' ' + APOS + %Trim(Value) + APOS;
If (SeqIndex < MaxSeq);
WhereStmt = %Trim(WhereStmt) + ' AND ';
EndIf;
Exec SQL FETCH NEXT FROM RULCRS INTO :RULEDS;
SeqIndex = SeqIndex + 1;
EndDo;
FullSqlStmt = %Trim('INSERT INTO ITMRVAT SELECT * +
FROM ITMRVA WHERE '+ %Trim(WhereStmt));
Exec SQL Prepare InsertStmt from :FullSqlStmt;
Exec SQL EXECUTE InsertStmt;
RulIndex = RulIndex + 1;
EndDo;
This produces SQL statement as shown below which is what I want. Now let me go ahead and look at the other parts of the code.
> EVAL FullSqlStmt
FULLSQLSTMT =
....5...10...15...20...25...30...35...40...45...50...55...60
1 'INSERT INTO ITMRVAT SELECT * FROM ITMRVA WHERE STID = 'PLD' '
61 'AND ENGNO LIKE '%415015%' AND SUBSTR(ENGNO,1,1) = 'R' AND SU'
121 'BSTR(ENGNO,5,1) = 'Y' '
181 ' '
241 ' '
301 ' '
361 ' '
421 ' '
481 ' '
But the issue is now as I mentioned in my comment to Danny, how to handle if a new rule involving second table is specified..
Embedded SQL does allow for 'dynamic statements' in ILE languages. You are able to have a query within a character field and then pass it into the Embedded SQL.
Dcl-S lQuery Varchar(100);
lQuery = 'SELECT * FROM CUST';
EXEC SQL
PREPARE SCust FROM :lQuery;
EXEC SQL
DECLARE SearchCust CURSOR FOR SCust;
//Continue working with cursor..
You may want to just prepare, execute and return a result set:
lQuery = 'SELECT * FROM CUST WHERE ID = ' + %Char(CustID);
EXEC SQL
PREPARE SCust FROM :lQuery;
DECLARE c1 CURSOR FOR SCust;
OPEN c1;
FETCH c1 INTO :CustDS;
CLOSE c1;
Optional extra: You may also want to use field markers (?) in your query.
//'SELECT * FROM CUST WHERE CUSTID = ?';
EXEC SQL OPEN SearchCust USING :CustID;
//'INSERT INTO CUST VALUES(?,?)';
EXEC SQL EXECUTE CUST USING :CustID;
You have to translate the rules into a join statement or a where clause. The join statement is more complex so go that route.
If you were smart (and you are) consider saving the rules as a SQL clause that you can join or use in a where clause. Its infinitely flexible this way a more modern design.
rule 1 / car.year = 1990 and car.engno like '%43243%' and substring(car.vin,12,1) = 'X'
eval statement =
insert into sometable
Select car.* from car
join sysibm.sysdummy1
on car.year = 1990
and car.engno lile '%43243%'
...etc on to rule 2 starting with "OR"
or car.year = PLD
and car.engno like '%1234%'
...etc other rules starting with "OR"
exec immediate statement
How do I make the query like this?
UPDATE DUA_DATA_FIL_AUD
SET REV = :rev,
SYS_UPDT_TS = :now
WHERE DUA_DATA_FIL_ID = 283
AND REV = 2524;
And so on for all the next 13 records and update all the corresponding columns?
Create a result of dynamic update queries using a select form the table you want to apply the updates on it's result set.
This shall create you a sort of script that you can copy and run in your command window to update the desired lines.
Hope this addresses what you really want :
SELECT 'UPDATE DUA_DATA_FIL_AUD SET REV = :rev, SYS_UPDT_TS = :now WHERE
DUA_DATA_FIL_ID =' || DUA_DATA_FIL_ID || 'AND REV =' || MAX(REV) || ';/'
FROM DUA_DATA_FIL_AUD GROUP BY DUA_DATA_FIL_ID,REV
SET #SQLSTATEMENT = 'INSERT INTO #MAX_STORAGE
SELECT MAX(A.[ROW])
FROM
(SELECT *
FROM [DATABASE].[dbo].[Refined_Est_Probability_09_MODIFIED]
WHERE
[FIPST_ENT] = ' + #FIPST_ENT + '
AND [FIPCNTY_ENT] = ' + #FIPCNTY_ENT + '
AND [SIC_ENT] = ' + #SIC2_ENT + '
AND [FMSZ_ENT] = ' + #FMSZENT_ENT + '
AND [ESTABLISHMENTS_AVAILABLE_FMSZEST <= ' + #MAXIMUM_FMSZEST+'] > 0) A'
EXEC(#SQLSTATEMENT)
I was running the dynamic SQL query above as part of a stored procedure I had written and got the following error:
Msg 207, Level 16, State 1, Line 7
Invalid column name 'A'.
I then changed my query so that it looked like this (eliminated the alias A):
SET #SQLSTATEMENT =
'INSERT INTO #MAX_STORAGE
SELECT
MAX([ROW])
FROM
(SELECT *
FROM [DATABASE].[dbo].[Refined_Est_Probability_09_MODIFIED]
WHERE [FIPST_ENT] = ' + #FIPST_ENT + '
AND [FIPCNTY_ENT] = ' + #FIPCNTY_ENT + '
AND [SIC_ENT] = ' + #SIC2_ENT + '
AND [FMSZ_ENT] = ' + #FMSZENT_ENT + '
AND [ESTABLISHMENTS_AVAILABLE_FMSZEST <= ' + #MAXIMUM_FMSZEST + '] > 0)'
EXEC(#SQLSTATEMENT)
But I still ran into an error (this time different):
Msg 102, level 15, state 1, line 9
Incorrect syntax near ')'
I declared the following variables earlier in the procedure with their respective data types/lengths seen next to them:
#FIPST_ENT CHAR(2)
#FIPCNTY_ENT CHAR(3)
#SIC2_ENT CHAR(2)
#FMSZENT_ENT CHAR(1)
#MAXIMUM_FMSZENT CHAR(1)
#SQLSTATEMENT VARCHAR(MAX)
Before this dynamic SQL statement was reached in the stored procedure, the temporary table #MAX_STORAGE was already created and contains only one column of datatype int.
Am I missing something I'm doing wrong? Any help would be greatly appreciated.
Thanks.
At bare minimum, you need to enclose string fields in escaped-single-quotes within the Dynamic SQL. The adaptation I show below is based on this comment on the Question:
FIPST_ENT is numeric in nature (i.e. 01-50) but cast as a character. Likewise with the other FIPCNTY_ENT and SIC2_ENT. FMSZENT is cast as a character but is sometimes numeric (i.e. 1-9) and other times non-numeric (i.e. A-C).
So it seems that only FMSZENT needs the escaped-single-quotes.
Also, using a derived query requires an alias. So whatever the initial problem was, you then introduced a new parse error by removing the alias ;-).
SET #SQLSTATEMENT =
'INSERT INTO #MAX_STORAGE
SELECT MAX(tmp.[ROW]) FROM
(SELECT * FROM [DATABASE].[dbo].[Refined_Est_Probability_09_MODIFIED]
WHERE [FIPST_ENT] = '+#FIPST_ENT+'
AND [FIPCNTY_ENT] = '+#FIPCNTY_ENT+'
AND [SIC_ENT] = '+#SIC2_ENT+'
AND [FMSZ_ENT] = '''+#FMSZENT_ENT+'''
AND [ESTABLISHMENTS_AVAILABLE_FMSZEST<='+#MAXIMUM_FMSZEST+'] > 0) tmp;'
Now, when it comes to debugging Dynamic SQL, the first step should be looking at what SQL you actually constructed, as it might not be what you think it should be:
PRINT #SQLSTATEMENT;
I am updating an XML column with values from columns in a temp table. I can update the table as below.
UPDATE tbWorkflow
SET xmlData.modify('insert
(<FromQueueName>
<CustomerID>{ sql:column("T.iVTollCustID") }</CustomerID>
<Date>{ sql:variable("#CurrDateTime") }</Date>
</FromQueueName>)
as first into (/configuration)[1]'),
vcQueue = 'qVtoll',
dtUpdTime = GETDATE()
FROM #Trxns T
WHERE T.biWorkflowID = tbWorkflow.biWorkflowID
However, I want the node name to be dynamic (from the temp table) like below. But it does not work.
UPDATE tbWorkflow
SET xmlData.modify('insert
(<**{ sql:column("T.vcQueue") }**>
<CustomerID>{ sql:column("T.iVTollCustID") }</CustomerID>
<Date>{ sql:variable("#CurrDateTime") }</Date>
</**{ sql:column("T.vcQueue") }**>)
as first into (/configuration)[1]'),
vcQueue = 'qVtoll',
dtUpdTime = GETDATE()
FROM #Trxns T
WHERE T.biWorkflowID = tbWorkflow.biWorkflowID
Any help is appreciated.
I think, you should use a subquery to select a string you need and then insert it into XML.
For example, in subquery get a <YourTag><CustomerID>123</CustomerID><Date>15.10.2012</Date></YourTag> and then you can simply insert it in XML
I found a workaround to do this.
I added another VARCHAR column to my temp table, created the xml node as a varchar and later modified my actual xml column using this varchar column.
UPDATE #Trxns
SET xmlVarchar = '<' + vcQueue + '>
<CustomerID>' + CONVERT(VARCHAR(10),iVTollCustID) + '</CustomerID>
<Date>' + CONVERT(VARCHAR(25), GETDATE(),22) + '</Date>' +
'</' + vcQueue + '>'
UPDATE tbWorkflow
SET xmlData.modify('insert
sql:column("xmlVarchar")
as first into (/configuration)[1]'),
vcQueue = 'qVtoll',
dtUpdTime = GETDATE()
FROM #Trxns T
WHERE T.biWorkflowID = tbWorkflow.biWorkflowID