I have few PCs in same network. One of the machines (ip: 192.168.1.110) is already hosting a WAMP server which is accessible through an external IP. I now want to install WAMP server on one more machine (ip: 192.168.1.120) and make it accessible through external link. But this new machine is not getting accessed through external link. Is there any configuration related stuff that I need to do in httpd.conf file to make it happen?
There are a number of issues with your idea of using a second PC running a second WAMPServer. Not that 2 machines and 2 WAMPServers is a problem.
First, I assume your router has already had port 80 "Port Forwarded" to the original PC's IpAddress (ip: 192.168.1.110). It cannot be forwarded to 2 different internal IP addresses, unless you tell people to use a different port number for the second sites domain name so that you can forward that other port to your second PC's port 80.
This leaves you a couple of possibilities :-
You either setup the original PC's Apache as a Proxy for the second PC and therefore forward accesses for the second site to the second PC while still running the first site on the first PC
Or, more simply in my opinion you stay with One PC running WAMPServer and you make use of Apache's Virtual Hosts capabilities.
This way as long as you have 2 seperate domain names, both pointing to your Routers WAN IP address both can still use port 80 i.e. Users dont need to add a port number. Apache will decide what site is required and run that site by simply looking at the domain name and redirecting everything to the right place.
See this post for some help on how to setup Virtual Hosts in WAMPServer
Its should only take a few minutes to setup.
Related
Im having this smh since months ago because i dont know a lot about networking. I want to place web apps in different ports in my server with apache. The thing is that I want the webs to be visible to outside my local network using a domain name. For example: www.example1.com in port 99 and www.example2.com in port 100.
I tried some time ago using Bind9 for DNS, opening ports, using virtual hosts... But nothing helped. The webs load correctly if I place my public ip with the port but I cannot do tha with different domain names for each web.
I am trying to setup a LAMP environment on my laptop with Ubuntu 18.04.
I have no experience real previous experience with this and all tutorials i find are just a step for step guide on how to setup, but none explain what you are exactly doing.
So I don't know why I am having this problem.
After installing all parts of LAMP I can access localhost, and I see the apache default page.
But if I try to go to my IPaddress, (the ipaddress I found with curl -4 icanhazip.com) the page loads for a while and then tells me this:
Firefox can’t establish a connection to the server at 213.127.26.xxx
So my question is am I using the right IPaddress and how can I make apache work from my IPaddress? Because phpmyadmin will not work on localhost.
The issue is likely that your local ports (i imagine your web server is running on port 80 or 8080) are not being forwarded through your router. Your router likely uses something called “NAT (network address translation)” to expose all of the internal IP addresses on your network through a single “public” IP address, in your case 213.x.x.x (you should never post this here unless you’re 100% positive your network is secure!). Your router needs to be configured to forward port 80 on 213.x.x.x to your machine’s “internal” ip address, likely something like “192.168.x.x” or “10.0.x.x”. A search for “port forwarding ” should help you out
Alternatively, ngrok is a nice free tool which you can use to expose your port on a public address. By running nginx http 80, it will provide you with a temporary url where you can reach your site (on a free plan, it will only provide you that url for one day, so you will need to re-run it)
First, you have to find out on which ports your server is running.
After that, you have to go into your router's settings and add port forwarding entries for these ports, to make sure that your router forwards the requests to the right device.
First, I already searched stack overflow and followed the suggestions in previous answers, such as How do I connect to this localhost from another computer on the same network?
I have created a PHP/MySQL application for a client. The want to host it locally on that server.
The machine in question is running an application written in another langauge (I'm not sure which one) and running Tomcat on port 8080.
They also do not have separate staging/production environments, so this is not ideal.
Their other web application needs to remain running while I also port over the new app. I installed XAAMP onto their system and got the app running locally using Apache HTTP. However, they want other computers both within and outside their networks to be able to connect to the Windows server as well. They are already doing this for the previously created app that is running on Tomcat.
Ports 80 and 8080 are already being used, so the firewall was updated to allow my application to run on port 8086.
I used ipconfig to the find the local IPv, and then tried updating the http.conf and vhost file and am listening to the IP on port 8086. However, going to the IP/foldername doesn't resolve on another computer in the network. As a test, I also just typed in the IP of the windows machine, and it never resolves.
I generally don't implement of windows; until now, all of my production applications have run on some flavor of unix. Their other application is live and I don't want to disturb it. They access it by going to {servername}:8080. I tried server:8086 to see if my app could be accessed that way, but it can't.
I confirmed that localhost/foldername resolves.
Here are the exact steps that I have taken. I tried two different solutions.
Solution 1, using How do I connect to this localhost from another computer on the same network? as a guide:
Make sure firewall allows port 8086 access
I modified the C:\xampp\apache\conf\extra\httpd-vhosts.conf file to include a virtual host for the application:
DocumentRoot "C:/xampp/htdocs/{foldername}"
ServerName dispatchserver
Went to the Windows host file located at \Windows\system32\drivers\etc\hosts and added the following:
192.xxx.x.xx dispatchserver
From a computer outside the network, tried to go to the following URLs (non resolved):
http://192.xxx.x.xx
http://192.xxx.x.xx:8086/
http://192.xxx.x.xx/foldername
http://dispatchserver
http://dispatchserver/foldername
Since they didn't work, I tried a solution using this older stack overflow answer: Accessing localhost (xampp) from another computer over LAN network - how to?
Made sure firewall allows port 8086 access
XAMPP control panel > Config > Service and Port Settings > Apache > Changed main port to 8086.
XAMPP control panel > Apache > Config > http.conf
Searched for "Listen 80" and replaced with Listen 8086
Right above that, added Listen 192.xxx.x.xx:8086 (I used the IPv4, but don't want to include full address for security reasons). I added this line with hashtag at first (#192.xxx.x.xx:8086) and then without hastag after that didn't work (192.xxx.x.xx:8086).
Searched for and set this up as the directory statement:
AllowOverride All
Require all granted
Restart Apache
What steps can I take to allow the new webapplication I installed via XAMPP to be accessible to other computers?
In that case it's a little different if you want to web enable this. You need to set up your router to port forward to your server (app)so that the other network can reach it from the internet. Your router blocks incoming requests by default so a port forwarding rule using the port you mentioned will work. You should also put your server computer (the one with the app) on a static ip address to make things easier. Then for the user to see your app you need to give them the ip address of your internet connection (seen via sites like ipchicken.com) and the port number in the url.
Normally you just need to open the ports in the windows firewall on both computers (inbound and outbound) for the ports your application is using and then connect to the other machine via ip address and port number if they are on the same network.
I can point a url to a directory in my computer by setting /etc/host and /private/etc/apache2/extra/httpd-vhosts.conf files. For instance, when i type sample-app.com in my computer, website under /Users/azad/works/sample-app.com folder is running.
When someone type sample-app.com in another computer in same local network i want to display the same website located on my computer. Is this possible?
By the way, i don't have access to any computer in the local network and i can't do any configuration.
Mac 10.7.5 (I am using mac but if windows is better for this purpose i can use windows too),
PHP 5.3,
Apache 2.2
If you want to accomplish this on windows, use the hosts file on the computers you want to point at that sample-app.com URL mapping your IP address to that URL in all the computers you want that to work on. Then make sure your HTTP server is configured to serve that website under that host name for port 80.
Since you aren't able to configure the local network, the best way to handle this situation is to configure a host name with the website domain's DNS server, such as dev.sample-app.com, which points to the local IP address (seeing as how its on the local network) of the computer hosting the website. This will then allow other computers on the local network to enter this host name to access the webiste.
If you had control of the local network's DNS server or control of the proxy (if they have a proxy), there would, of course, be other options.
Update:
Since you mentioned in your comment that you have control over the DNS server, here is how you could accomplish your goal via the DNS server. First, add a forward lookup zone for sample-app.com to the DNS server. Second, configure the default host for the zone to point to the computer serving up the website content. Now the client computers will resolve the local IP when the user enters sample-app.com into their web browsers. If you need to continue to have access to other hosts on sample-app.com, you might want to try asking about it on serverfault.
How do I set up a website that's accessible within a small (office) network? I've only worked on localhost (using WAMP) so far and have no idea where to start. Also, is it possible to access that website through a pseudo domain name/alias instead of an IP?
This is of topic here - and wil be covered by lots of basic set up tutorials.
It's exactly the same process, except you need to ensure that clients on the lan can connect to the webserver runing on port 80 - i.e. make sure your firewall isn't blocking the access and that apache is listening on the LAN interface address (the default configs are usually to listen on all addresses).
is it possible to access that website...
Yes - just publish a DNS record for the webserver in your DNS server - or add it to the hosts files on all of the clients.