Related
There is a closed form for the Fibonacci sequence that can be obtained via generating functions. It is:
f_n = 1/sqrt(5) (phi^n-\psi^n)
For what the terms mean, see the link above or here.
However, it is discussed here that this closed form isn't really used in practice because it starts producing the wrong answers when n becomes around a hundred and larger.
But in the answer here, it seems one of the methods employed is fast matrix exponentiation which can be used to get the nth Fibonacci number very efficiently in O(log(n)) time.
But then, the closed form expression involves a bunch of terms that are raised to the nth power. So, you could calculate all those terms with fast exponentiation and get the result efficiently that way. Why would fast exponentiation on a matrix be better than doing it on scalars that show up in the closed-form expression? And besides, looking for how to do fast exponentiation of a matrix efficiently, the accepted answer here suggests we convert to the diagonal form and do it on scalars anyway.
The question then is - if fast exponentiation of a matrix is good for calculating the nth Fibonacci number in O(log(n)) time, why isn't the closed form a good way to do it when it involves fast exponentiation on scalars?
The "closed form" formula for computing Fibonacci numbers, you need to raise irrational numbers to the power n, which means you have to accept using only approximations (typically, double-precision floating-point arithmetic) and therefore inaccurate results for large numbers.
On the contrary, in the "matrix exponentiation" formula for computing Fibonacci numbers, the matrix you are raising to the power n is an integer matrix, so you can do integer calculations with no loss of precision using a "big int" library to do arithmetic with arbitrarily large integers (or if you use a language like Python, "big ints" are the default).
So the difference is that you can't do exact arithmetic with irrational numbers but you can with integers.
Note that "In practice" here is referring to competitive programming (in reality, you basically never want to compute massive fibonacci numbers). So, the first reason is that the normal way of calculating fibonacci numbers is way faster to type without making any errors, and less code. Plus, it will be faster than the fancy method for small numbers.
When it comes to big numbers, Fast Matrix multiplication is O(log(n)) if you don't care about precision. However, in competitive programming we almost always care about precision and want the correct answer. To do that, we would need to increase the precision of our numbers. And the bigger n gets, the more precision is required. I don't know the exact formula, but I would imagine that because of the increased precision required, the matrix multiplication which requires only O(log n) multiplications will require something like O(log n) bits of precision so the time complexity will actually end up being somewhat bad (O(log^3 n) maybe?). Not to mention, even harder to code and very slow because you are multiplying arbitrary-precision numbers.
Why do some numbers lose accuracy when stored as floating point numbers?
For example, the decimal number 9.2 can be expressed exactly as a ratio of two decimal integers (92/10), both of which can be expressed exactly in binary (0b1011100/0b1010). However, the same ratio stored as a floating point number is never exactly equal to 9.2:
32-bit "single precision" float: 9.19999980926513671875
64-bit "double precision" float: 9.199999999999999289457264239899814128875732421875
How can such an apparently simple number be "too big" to express in 64 bits of memory?
In most programming languages, floating point numbers are represented a lot like scientific notation: with an exponent and a mantissa (also called the significand). A very simple number, say 9.2, is actually this fraction:
5179139571476070 * 2 -49
Where the exponent is -49 and the mantissa is 5179139571476070. The reason it is impossible to represent some decimal numbers this way is that both the exponent and the mantissa must be integers. In other words, all floats must be an integer multiplied by an integer power of 2.
9.2 may be simply 92/10, but 10 cannot be expressed as 2n if n is limited to integer values.
Seeing the Data
First, a few functions to see the components that make a 32- and 64-bit float. Gloss over these if you only care about the output (example in Python):
def float_to_bin_parts(number, bits=64):
if bits == 32: # single precision
int_pack = 'I'
float_pack = 'f'
exponent_bits = 8
mantissa_bits = 23
exponent_bias = 127
elif bits == 64: # double precision. all python floats are this
int_pack = 'Q'
float_pack = 'd'
exponent_bits = 11
mantissa_bits = 52
exponent_bias = 1023
else:
raise ValueError, 'bits argument must be 32 or 64'
bin_iter = iter(bin(struct.unpack(int_pack, struct.pack(float_pack, number))[0])[2:].rjust(bits, '0'))
return [''.join(islice(bin_iter, x)) for x in (1, exponent_bits, mantissa_bits)]
There's a lot of complexity behind that function, and it'd be quite the tangent to explain, but if you're interested, the important resource for our purposes is the struct module.
Python's float is a 64-bit, double-precision number. In other languages such as C, C++, Java and C#, double-precision has a separate type double, which is often implemented as 64 bits.
When we call that function with our example, 9.2, here's what we get:
>>> float_to_bin_parts(9.2)
['0', '10000000010', '0010011001100110011001100110011001100110011001100110']
Interpreting the Data
You'll see I've split the return value into three components. These components are:
Sign
Exponent
Mantissa (also called Significand, or Fraction)
Sign
The sign is stored in the first component as a single bit. It's easy to explain: 0 means the float is a positive number; 1 means it's negative. Because 9.2 is positive, our sign value is 0.
Exponent
The exponent is stored in the middle component as 11 bits. In our case, 0b10000000010. In decimal, that represents the value 1026. A quirk of this component is that you must subtract a number equal to 2(# of bits) - 1 - 1 to get the true exponent; in our case, that means subtracting 0b1111111111 (decimal number 1023) to get the true exponent, 0b00000000011 (decimal number 3).
Mantissa
The mantissa is stored in the third component as 52 bits. However, there's a quirk to this component as well. To understand this quirk, consider a number in scientific notation, like this:
6.0221413x1023
The mantissa would be the 6.0221413. Recall that the mantissa in scientific notation always begins with a single non-zero digit. The same holds true for binary, except that binary only has two digits: 0 and 1. So the binary mantissa always starts with 1! When a float is stored, the 1 at the front of the binary mantissa is omitted to save space; we have to place it back at the front of our third element to get the true mantissa:
1.0010011001100110011001100110011001100110011001100110
This involves more than just a simple addition, because the bits stored in our third component actually represent the fractional part of the mantissa, to the right of the radix point.
When dealing with decimal numbers, we "move the decimal point" by multiplying or dividing by powers of 10. In binary, we can do the same thing by multiplying or dividing by powers of 2. Since our third element has 52 bits, we divide it by 252 to move it 52 places to the right:
0.0010011001100110011001100110011001100110011001100110
In decimal notation, that's the same as dividing 675539944105574 by 4503599627370496 to get 0.1499999999999999. (This is one example of a ratio that can be expressed exactly in binary, but only approximately in decimal; for more detail, see: 675539944105574 / 4503599627370496.)
Now that we've transformed the third component into a fractional number, adding 1 gives the true mantissa.
Recapping the Components
Sign (first component): 0 for positive, 1 for negative
Exponent (middle component): Subtract 2(# of bits) - 1 - 1 to get the true exponent
Mantissa (last component): Divide by 2(# of bits) and add 1 to get the true mantissa
Calculating the Number
Putting all three parts together, we're given this binary number:
1.0010011001100110011001100110011001100110011001100110 x 1011
Which we can then convert from binary to decimal:
1.1499999999999999 x 23 (inexact!)
And multiply to reveal the final representation of the number we started with (9.2) after being stored as a floating point value:
9.1999999999999993
Representing as a Fraction
9.2
Now that we've built the number, it's possible to reconstruct it into a simple fraction:
1.0010011001100110011001100110011001100110011001100110 x 1011
Shift mantissa to a whole number:
10010011001100110011001100110011001100110011001100110 x 1011-110100
Convert to decimal:
5179139571476070 x 23-52
Subtract the exponent:
5179139571476070 x 2-49
Turn negative exponent into division:
5179139571476070 / 249
Multiply exponent:
5179139571476070 / 562949953421312
Which equals:
9.1999999999999993
9.5
>>> float_to_bin_parts(9.5)
['0', '10000000010', '0011000000000000000000000000000000000000000000000000']
Already you can see the mantissa is only 4 digits followed by a whole lot of zeroes. But let's go through the paces.
Assemble the binary scientific notation:
1.0011 x 1011
Shift the decimal point:
10011 x 1011-100
Subtract the exponent:
10011 x 10-1
Binary to decimal:
19 x 2-1
Negative exponent to division:
19 / 21
Multiply exponent:
19 / 2
Equals:
9.5
Further reading
The Floating-Point Guide: What Every Programmer Should Know About Floating-Point Arithmetic, or, Why don’t my numbers add up? (floating-point-gui.de)
What Every Computer Scientist Should Know About Floating-Point Arithmetic (Goldberg 1991)
IEEE Double-precision floating-point format (Wikipedia)
Floating Point Arithmetic: Issues and Limitations (docs.python.org)
Floating Point Binary
This isn't a full answer (mhlester already covered a lot of good ground I won't duplicate), but I would like to stress how much the representation of a number depends on the base you are working in.
Consider the fraction 2/3
In good-ol' base 10, we typically write it out as something like
0.666...
0.666
0.667
When we look at those representations, we tend to associate each of them with the fraction 2/3, even though only the first representation is mathematically equal to the fraction. The second and third representations/approximations have an error on the order of 0.001, which is actually much worse than the error between 9.2 and 9.1999999999999993. In fact, the second representation isn't even rounded correctly! Nevertheless, we don't have a problem with 0.666 as an approximation of the number 2/3, so we shouldn't really have a problem with how 9.2 is approximated in most programs. (Yes, in some programs it matters.)
Number bases
So here's where number bases are crucial. If we were trying to represent 2/3 in base 3, then
(2/3)10 = 0.23
In other words, we have an exact, finite representation for the same number by switching bases! The take-away is that even though you can convert any number to any base, all rational numbers have exact finite representations in some bases but not in others.
To drive this point home, let's look at 1/2. It might surprise you that even though this perfectly simple number has an exact representation in base 10 and 2, it requires a repeating representation in base 3.
(1/2)10 = 0.510 = 0.12 = 0.1111...3
Why are floating point numbers inaccurate?
Because often-times, they are approximating rationals that cannot be represented finitely in base 2 (the digits repeat), and in general they are approximating real (possibly irrational) numbers which may not be representable in finitely many digits in any base.
While all of the other answers are good there is still one thing missing:
It is impossible to represent irrational numbers (e.g. π, sqrt(2), log(3), etc.) precisely!
And that actually is why they are called irrational. No amount of bit storage in the world would be enough to hold even one of them. Only symbolic arithmetic is able to preserve their precision.
Although if you would limit your math needs to rational numbers only the problem of precision becomes manageable. You would need to store a pair of (possibly very big) integers a and b to hold the number represented by the fraction a/b. All your arithmetic would have to be done on fractions just like in highschool math (e.g. a/b * c/d = ac/bd).
But of course you would still run into the same kind of trouble when pi, sqrt, log, sin, etc. are involved.
TL;DR
For hardware accelerated arithmetic only a limited amount of rational numbers can be represented. Every not-representable number is approximated. Some numbers (i.e. irrational) can never be represented no matter the system.
There are infinitely many real numbers (so many that you can't enumerate them), and there are infinitely many rational numbers (it is possible to enumerate them).
The floating-point representation is a finite one (like anything in a computer) so unavoidably many many many numbers are impossible to represent. In particular, 64 bits only allow you to distinguish among only 18,446,744,073,709,551,616 different values (which is nothing compared to infinity). With the standard convention, 9.2 is not one of them. Those that can are of the form m.2^e for some integers m and e.
You might come up with a different numeration system, 10 based for instance, where 9.2 would have an exact representation. But other numbers, say 1/3, would still be impossible to represent.
Also note that double-precision floating-points numbers are extremely accurate. They can represent any number in a very wide range with as much as 15 exact digits. For daily life computations, 4 or 5 digits are more than enough. You will never really need those 15, unless you want to count every millisecond of your lifetime.
Why can we not represent 9.2 in binary floating point?
Floating point numbers are (simplifying slightly) a positional numbering system with a restricted number of digits and a movable radix point.
A fraction can only be expressed exactly using a finite number of digits in a positional numbering system if the prime factors of the denominator (when the fraction is expressed in it's lowest terms) are factors of the base.
The prime factors of 10 are 5 and 2, so in base 10 we can represent any fraction of the form a/(2b5c).
On the other hand the only prime factor of 2 is 2, so in base 2 we can only represent fractions of the form a/(2b)
Why do computers use this representation?
Because it's a simple format to work with and it is sufficiently accurate for most purposes. Basically the same reason scientists use "scientific notation" and round their results to a reasonable number of digits at each step.
It would certainly be possible to define a fraction format, with (for example) a 32-bit numerator and a 32-bit denominator. It would be able to represent numbers that IEEE double precision floating point could not, but equally there would be many numbers that can be represented in double precision floating point that could not be represented in such a fixed-size fraction format.
However the big problem is that such a format is a pain to do calculations on. For two reasons.
If you want to have exactly one representation of each number then after each calculation you need to reduce the fraction to it's lowest terms. That means that for every operation you basically need to do a greatest common divisor calculation.
If after your calculation you end up with an unrepresentable result because the numerator or denominator you need to find the closest representable result. This is non-trivil.
Some Languages do offer fraction types, but usually they do it in combination with arbitary precision, this avoids needing to worry about approximating fractions but it creates it's own problem, when a number passes through a large number of calculation steps the size of the denominator and hence the storage needed for the fraction can explode.
Some languages also offer decimal floating point types, these are mainly used in scenarios where it is imporant that the results the computer gets match pre-existing rounding rules that were written with humans in mind (chiefly financial calculations). These are slightly more difficult to work with than binary floating point, but the biggest problem is that most computers don't offer hardware support for them.
Do modern GPUs optimize multiplication by powers of 2 by doing a bit shift? For example suppose I do the following in a shader:
float t = 0;
t *= 16;
t *= 17;
Is it possible the first multiplication will run faster than the second?
Floating point multiplication cannot be done by bit shift. Howerver, in theory floating point multiplication by power of 2 constants can be optimized. Floating point value is normally stored in the form of S * M * 2 ^ E, where S is a sign, M is mantissa and E is exponent. Multiplying by a power of 2 constant can be done by adding/substracting to the exponent part of the float, without modifying the other parts. But in practice, I would bet that on GPUs a generic multiply instruction is always used.
I had an interesting observation regarding the power of 2 constants while studying the disassembly output of the PVRShaderEditor (PowerVR GPUs). I have noticed that a certain range of power of 2 constants ([2^(-16), 2^10] in my case), use special notation, e.g. C65, implying that they are predefined. Whereas arbitrary constants, such as 3.0 or 2.3, use shared register notation (e.g. SH12), which implies they are stored as a uniform and probably incur some setup cost. Thus using power of 2 constants may yield some optimizational benefit at least on some hardware.
Greetings. I'm trying to approximate the function
Log10[x^k0 + k1], where .21 < k0 < 21, 0 < k1 < ~2000, and x is integer < 2^14.
k0 & k1 are constant. For practical purposes, you can assume k0 = 2.12, k1 = 2660. The desired accuracy is 5*10^-4 relative error.
This function is virtually identical to Log[x], except near 0, where it differs a lot.
I already have came up with a SIMD implementation that is ~1.15x faster than a simple lookup table, but would like to improve it if possible, which I think is very hard due to lack of efficient instructions.
My SIMD implementation uses 16bit fixed point arithmetic to evaluate a 3rd degree polynomial (I use least squares fit). The polynomial uses different coefficients for different input ranges. There are 8 ranges, and range i spans (64)2^i to (64)2^(i + 1).
The rational behind this is the derivatives of Log[x] drop rapidly with x, meaning a polynomial will fit it more accurately since polynomials are an exact fit for functions that have a derivative of 0 beyond a certain order.
SIMD table lookups are done very efficiently with a single _mm_shuffle_epi8(). I use SSE's float to int conversion to get the exponent and significand used for the fixed point approximation. I also software pipelined the loop to get ~1.25x speedup, so further code optimizations are probably unlikely.
What I'm asking is if there's a more efficient approximation at a higher level?
For example:
Can this function be decomposed into functions with a limited domain like
log2((2^x) * significand) = x + log2(significand)
hence eliminating the need to deal with different ranges (table lookups). The main problem I think is adding the k1 term kills all those nice log properties that we know and love, making it not possible. Or is it?
Iterative method? don't think so because the Newton method for log[x] is already a complicated expression
Exploiting locality of neighboring pixels? - if the range of the 8 inputs fall in the same approximation range, then I can look up a single coefficient, instead of looking up separate coefficients for each element. Thus, I can use this as a fast common case, and use a slower, general code path when it isn't. But for my data, the range needs to be ~2000 before this property hold 70% of the time, which doesn't seem to make this method competitive.
Please, give me some opinion, especially if you're an applied mathematician, even if you say it can't be done. Thanks.
You should be able to improve on least-squares fitting by using Chebyshev approximation. (The idea is, you're looking for the approximation whose worst-case deviation in a range is least; least-squares instead looks for the one whose summed squared difference is least.) I would guess this doesn't make a huge difference for your problem, but I'm not sure -- hopefully it could reduce the number of ranges you need to split into, somewhat.
If there's already a fast implementation of log(x), maybe compute P(x) * log(x) where P(x) is a polynomial chosen by Chebyshev approximation. (Instead of trying to do the whole function as a polynomial approx -- to need less range-reduction.)
I'm an amateur here -- just dipping my toe in as there aren't a lot of answers already.
One observation:
You can find an expression for how large x needs to be as a function of k0 and k1, such that the term x^k0 dominates k1 enough for the approximation:
x^k0 +k1 ~= x^k0, allowing you to approximately evaluate the function as
k0*Log(x).
This would take care of all x's above some value.
I recently read how the sRGB model compresses physical tri stimulus values into stored RGB values.
It basically is very similar to the function I try to approximate, except that it's defined piece wise:
k0 x, x < 0.0031308
k1 x^0.417 - k2 otherwise
I was told the constant addition in Log[x^k0 + k1] was to make the beginning of the function more linear. But that can easily be achieved with a piece wise approximation. That would make the approximation a lot more "uniform" - with only 2 approximation ranges. This should be cheaper to compute due to no longer needing to compute an approximation range index (integer log) and doing SIMD coefficient lookup.
For now, I conclude this will be the best approach, even though it doesn't approximate the function precisely. The hard part will be proposing this change and convincing people to use it.
I searched the site but did not find exactly what I was looking for... I wanted to generate a discrete random number from normal distribution.
For example, if I have a range from a minimum of 4 and a maximum of 10 and an average of 7. What code or function call ( Objective C preferred ) would I need to return a number in that range. Naturally, due to normal distribution more numbers returned would center round the average of 7.
As a second example, can the bell curve/distribution be skewed toward one end of the other? Lets say I need to generate a random number with a range of minimum of 4 and maximum of 10, and I want the majority of the numbers returned to center around the number 8 with a natural fall of based on a skewed bell curve.
Any help is greatly appreciated....
Anthony
What do you need this for? Can you do it the craps player's way?
Generate two random integers in the range of 2 to 5 (inclusive, of course) and add them together. Or flip a coin (0,1) six times and add 4 to the result.
Summing multiple dice produces a normal distribution (a "bell curve"), while eliminating high or low throws can be used to skew the distribution in various ways.
The key is you are going for discrete numbers (and I hope you mean integers by that). Multiple dice throws famously generate a normal distribution. In fact, I think that's how we were first introduced to the Gaussian curve in school.
Of course the more throws, the more closely you approximate the bell curve. Rolling a single die gives a flat line. Rolling two dice just creates a ramp up and down that isn't terribly close to a bell. Six coin flips gets you closer.
So consider this...
If I understand your question correctly, you only have seven possible outcomes--the integers (4,5,6,7,8,9,10). You can set up an array of seven probabilities to approximate any distribution you like.
Many frameworks and libraries have this built-in.
Also, just like TokenMacGuy said a normal distribution isn't characterized by the interval it's defined on, but rather by two parameters: Mean μ and standard deviation σ. With both these parameters you can confine a certain quantile of the distribution to a certain interval, so that 95 % of all points fall in that interval. But resticting it completely to any interval other than (−∞, ∞) is impossible.
There are several methods to generate normal-distributed values from uniform random values (which is what most random or pseudorandom number generators are generating:
The Box-Muller transform is probably the easiest although not exactly fast to compute. Depending on the number of numbers you need, it should be sufficient, though and definitely very easy to write.
Another option is Marsaglia's Polar method which is usually faster1.
A third method is the Ziggurat algorithm which is considerably faster to compute but much more complex to program. In applications that really use a lot of random numbers it may be the best choice, though.
As a general advice, though: Don't write it yourself if you have access to a library that generates normal-distributed random numbers for you already.
For skewing your distribution I'd just use a regular normal distribution, choosing μ and σ appropriately for one side of your curve and then determine on which side of your wanted mean a point fell, stretching it appropriately to fit your desired distribution.
For generating only integers I'd suggest you just round towards the nearest integer when the random number happens to fall within your desired interval and reject it if it doesn't (drawing a new random number then). This way you won't artificially skew the distribution (such as you would if you were clamping the values at 4 or 10, respectively).
1 In testing with deliberately bad random number generators (yes, worse than RANDU) I've noticed that the polar method results in an endless loop, rejecting every sample. Won't happen with random numbers that fulfill the usual statistic expectations to them, though.
Yes, there are sophisticated mathematical solutions, but for "simple but practical" I'd go with Nosredna's comment. For a simple Java solution:
Random random=new Random();
public int bell7()
{
int n=4;
for (int x=0;x<6;++x)
n+=random.nextInt(2);
return n;
}
If you're not a Java person, Random.nextInt(n) returns a random integer between 0 and n-1. I think the rest should be similar to what you'd see in any programming language.
If the range was large, then instead of nextInt(2)'s I'd use a bigger number in there so there would be fewer iterations through the loop, depending on frequency of call and performance requirements.
Dan Dyer and Jay are exactly right. What you really want is a binomial distribution, not a normal distribution. The shape of a binomial distribution looks a lot like a normal distribution, but it is discrete and bounded whereas a normal distribution is continuous and unbounded.
Jay's code generates a binomial distribution with 6 trials and a 50% probability of success on each trial. If you want to "skew" your distribution, simply change the line that decides whether to add 1 to n so that the probability is something other than 50%.
The normal distribution is not described by its endpoints. Normally it's described by it's mean (which you have given to be 7) and its standard deviation. An important feature of this is that it is possible to get a value far outside the expected range from this distribution, although that will be vanishingly rare, the further you get from the mean.
The usual means for getting a value from a distribution is to generate a random value from a uniform distribution, which is quite easily done with, for example, rand(), and then use that as an argument to a cumulative distribution function, which maps probabilities to upper bounds. For the standard distribution, this function is
F(x) = 0.5 - 0.5*erf( (x-μ)/(σ * sqrt(2.0)))
where erf() is the error function which may be described by a taylor series:
erf(z) = 2.0/sqrt(2.0) * Σ∞n=0 ((-1)nz2n + 1)/(n!(2n + 1))
I'll leave it as an excercise to translate this into C.
If you prefer not to engage in the exercise, you might consider using the Gnu Scientific Library, which among many other features, has a technique to generate random numbers in one of many common distributions, of which the Gaussian Distribution (hint) is one.
Obviously, all of these functions return floating point values. You will have to use some rounding strategy to convert to a discrete value. A useful (but naive) approach is to simply downcast to integer.