Currently I am having an issue bringing back the correct data for this particular query below. I am attempting to bring back data that excludes select criteria from the subselect statement after MINUS keyword.
SELECT
DISTINCT ORDER.OWNER, ORDER_H.PO_ID
FROM ORDER ORDER
WHERE ORDER.TYPE != 'X'
AND ORDER.STATUS='10'
AND ORDER.CLOSE_DATE IS NULL MINUS
(
SELECT
DISTINCT ORDER.OWNER, ORDER.PO_ID
FROM ORDER ORDER
INNER JOIN COST COST ON COST.PO_ID = ORDER.PO_ID
AND COST.CODE IN
(
'LGSF',
'DFCDC',
'BOF',
'TFR',
'RFR',
'TFLHC',
'BF',
'CBF',
'CHAP',
'DYPH' ,
'OFFP',
'PTWT',
'DTEN',
'OTHR',
'DMSG',
'STOR',
'TOF',
'ANTCV',
'ANTIP',
'CVD',
'TRAN'
)
WHERE ORDER.TYPE != 'OTR'
AND ORDER.STATUS = '10'
AND (COST.E_AMT > 0 AND COST.A_AMT IS NULL)
)
FOR READ ONLY WITH UR
The data coming back includes the data within the subquery instead of excluding this data from the resultset. I cannot figure out why this is the case. Does anyone have any idea why after MINUS it doesn't exclude this data and is bringing back data where COST.E_AMT is actually greater than 0 and COST.A_AMT is actually populated for each CODE listed in the subquery? Any help would be appreciated, thanks.
Related
I am using a NOT EXSITS clause in my query and wanted to make sure it was working correctly since I was getting lesser rows than expected.
SELECT DISTINCT offer.courier_uuid,
offer.region_uuid,
offer.offer_time_local,
Cast(scores.acceptance_rate AS DECIMAL(5, 3)) AS acceptance_rate
FROM integrated_delivery.trip_offer_fact offer
JOIN integrated_product.driver_score_v2 scores ON offer.courier_uuid = scores.courier_id
AND offer.region_uuid = scores.region_id
AND offer.business_day BETWEEN date '2019-04-04' AND date '2019-04-07'
AND scores.extract_dt = 20190331
AND NOT EXISTS
(SELECT NULL
FROM source_cassandra_courier_scheduling.assigned_block_by_id_v2 sched
JOIN source_cassandra_delivery.region r ON sched.region_id = r.id
WHERE offer.courier_uuid = sched.courier_id
AND offer.offer_time_local >= date_parse(date_format(AT_TIMEZONE("start",r.time_zone),'%Y-%m-%d %H:%i:%s'),'%Y-%m-%d %H:%i:%s')
AND offer.offer_time_local <= date_parse(date_format(AT_TIMEZONE("end",r.time_zone),'%Y-%m-%d %H:%i:%s'),'%Y-%m-%d %H:%i:%s')
AND element_at(sched.state,-1) = 'ASSIGNED')
ORDER BY 3
Is there anything wrong with my not exists clause? I am only asking since I am getting back lesser rows than expected. The not exists caluse contains a time conversion but i dont think that would affect anything.
I am trying to get all possible ids and their offer times that do NOT EXIST in the scheduled shifts table. I wanted confirm if the way I have the NOT EXISTS clause is correct or if there is something else I would need that would correctly pull all records that exist or not exist in that shed table?
This is being run on sql for IBMI Series 7
I have a table which stores info about orders. Each row has an order number (ON), part number(PN), and sequence number(SEQ). Each ON will have multiple PN's linked to them and each part number has multiple SEQ Number. Each sequence number represents the order in which to do work on the part. Somewhere else in the system once the part is at a location and ready to be worked on it shows a flag. What I want to do is get a list of orders for a location that have not yet arrived but have been closed out on the previous location( Which means the part is on it's way).
I have a query listed below that I believe should work but I get the following error: "The column qualifier or table t undefined". Where is my issue at?
Select * From (SELECT M2ON as Order__Number , M2SEQ as Sequence__Number,
M2PN as Product__Number,ML2OQ as Order__Quantity
FROM M2P
WHERE M2pN in (select R1PN FROM R1P WHERE (RTWC = '7411') AND (R1SEQ = M2SEQ)
)
AND M2ON IN (SELECT M1ON FROM M1P WHERE ML1RCF = '')
ORDER BY ML2OSM ASC) as T
WHERE
T.Order__Number in (Select t3.m2on from (SELECT *
FROM(Select * from m2p
where m2on = t.Order__Number and m2pn = t.Product__Number
order by m2seq asc fetch first 2 rows only
)as t1 order by m2seq asc fetch first row only
) as t3 where t3.m2stat = 'C')
EDIT- Answer for anyone else with this issue
Clutton's Answer worked with slight modification so thank you to him for the fast response! I had to name my outer table and specify that in the subquery otherwise the as400 would kick back and tell me it couldn't find the columns. I also had to order by the sequence number descending so that I grabbed the highest record that was below the parameter(otherwise for example if my sequence number was 20 it could grab 5 even though 10 was available and should be shown first. Here is the subquery I now use. Please note the actual query names m2p as T1.
IFNULL((
SELECT
M2STAT
FROM
M2P as M2P_1
WHERE
M2ON = T1.M2ON
AND M2SEQ < T1.M2SEQ
AND M2PN IN (select R1PN FROM R1P WHERE (RTWC = #WC) AND (R1SEQ = T1.M2SEQ))
ORDER BY M2SEQ DESC
FETCH FIRST ROW ONLY
), 'NULL') as PRIOR_M2STAT
Just reading your question, it looks like something I do frequently to emulate RPG READPE op codes. Is the key to M2P Order/Seq? If so, here is a basic piece that may help you build out the rest of the query.
I am assuming that you are trying to get the prior record by key using SQL. In RPG this would be like doing a READPE on the key for a file with Order/Seq key.
Here is an example using a subquery to get the status field of the prior record.
SELECT
M2ON, M2PN, M2OQ, M2STAT,
IFNULL((
SELECT
M2STAT
FROM
M2P as M2P_1
WHERE
M2P_1.M2ON = M2ON
AND M2P_1.M2SEQ < M2SEQ
FETCH FIRST ROW ONLY
), '') as PRIOR_M2STAT
FROM
M2P
Note that this wraps the subquery in an IFNULL to handle the case where it is the first sequence number and no prior sequence exists.
Hi I have a redshift table of articles that has a field on it that can contain many accounts. So there is a one to many relationship between articles to accounts.
However I want to create a new view where it lists the partner id's in one column and in another column a count of how many times the partner id appears in the articles table.
I've attempted to do this using regex and created a new redshift view, but am getting weird results where it doesn't always build properly. So one day it will say a partner appears 15 times, then the next 17, then the next 15, when the partner id count hasn't actually changed.
Any help would be greatly appreciated.
SELECT partner_id,
COUNT(DISTINCT id)
FROM (SELECT id,
partner_ids,
SPLIT_PART(partner_ids,',',i) partner_id
FROM positron_articles a
LEFT JOIN util.seq_0_to_500 s
ON s.i < regexp_count (partner_ids,',') + 2
OR s.i = 1
WHERE i > 0
AND regexp_count (partner_ids,',') = 0
ORDER BY id)
GROUP BY 1;
Let's start with some of the more obvious things and see if we can start to glean other information.
Next GROUP BY 1 on your outer query needs to be GROUP BY partner_id.
Next you don't need an order by in your INNER query and the database engine will probably do a better job optimizing performance without it so remove ORDER BY id.
If you want your final results to be ordered then add an ORDER BY partner_id or similar clause after your group by of your OUTER query.
It looks like there are also problems with how you are splitting a partnerid from partnerids but I am not positive about that because I need to understand your view and the data it provides to know how that affects your record count for partnerid.
Next your LEFT JOIN statement on the util.seq_0_to_500 I am pretty sure you can drop off the s.i = 1 as the first condition will satisfy that as well because 2 is greater than 1. However your left join really acts more like an inner join because you then exclude any non matches from positron_articles that don't have a s.i > 0.
Oddly then your entire join and inner query gets kind of discarded because you only want articles that have no commas in their partnerids: regexp_count (partner_ids,',') = 0
I would suggest posting the code for your util.seq_0_to_500 and if you have a partner table let use know about that as well because you can probably get your answer a lot easier with that additional table depending on how regexp_count works. I suspect regex_count(partnerids,partnerid) exampleregex_count('12345,678',1234) will return greater than 0 at which point you have no choice but to split the delimited strings into another table before counting or building a new matching function.
If regex_count only matches exact between commas and you have a partner table your query could be as easy as this:
SELECT
p.partner_id
,COUNT(a.id) AS ArticlesAppearedIn
FROM
positron_articles a
LEFT JOIN PARTNERTABLE p
ON regexp_count(a.partnerids,p.partnerid) > 0
GROUP BY
p.partner_id
I will actually correct myself as I just thought of a way to join a partner table without regexp_count. So if you have a partner table this might work for you. If not you will need to split strings. It basically tests to see if the partnerid is the entire partnerids, at the beginning, in the middle, or at the end of partnerids. If one of those is met then the records is returned.
SELECT
p.partner_id
,COUNT(a.id) AS ArticlesAppearedIn
FROM
PARTNERTABLE p
INNER JOIN positron_articles a
ON
(
CASE
WHEN a.partnerids = CAST(p.partnerid AS VARCHAR(100)) THEN 1
WHEN a.partnerids LIKE p.partnerid + ',%' THEN 1
WHEN a.partnerids LIKE '%,' + p.partnerid + ',%' THEN 1
WHEN a.partnerids LIKE '%,' + p.partnerid THEN 1
ELSE 0
END
) = 1
GROUP BY
p.partner_id
I hve to display several cell values into one cell. So I am using this query:
select LISTAGG(fc.DESCRIPTION, ';'||chr(10))WITHIN GROUP (ORDER BY fc.SWITCH_NAME) AS DESCRIP from "ORS".SWITCH_OPERATIONS fc
group by fc.SWITCH_NAME
It is working fine. But when I am merging this with my main(complete) query then I am getting the error as: Error code 1427, SQL state 21000: ORA-01427: single-row subquery returns more than one row
Here is my complete query:
SELECT
TRACK_EVENT.LOCATION,
TRACK_EVENT.ELEMENT_NAME,
(select COUNT(*) from ORS.TRACK_EVENT b where (b.ELEMENT_NAME = sw.SWITCH_NAME)AND (b.ELEMENT_TYPE = 'SWITCH')AND (b.EVENT_TYPE = 'I')AND (b.ELEMENT_STATE = 'NORMAL' OR b.ELEMENT_STATE = 'REVERSE'))as COUNTER,
(select COUNT(*) from ORS.SWITCH_OPERATIONS fc where TRACK_EVENT.ELEMENT_NAME = fc.SWITCH_NAME and fc.NO_CORRESPONDENCE = 1 )as FAIL_COUNT,
(select MAX(cw.COMMAND_TIME) from ORS.SWITCH_OPERATIONS cw where ((TRACK_EVENT.ELEMENT_NAME = cw.SWITCH_NAME) and (cw.NO_CORRESPONDENCE = 1)) group by cw.SWITCH_NAME ) as FAILURE_DATE,
(select LISTAGG(fc.DESCRIPTION, ';'||chr(10))WITHIN GROUP (ORDER BY fc.SWITCH_NAME) AS DESCRIP from "ORS".SWITCH_OPERATIONS fc
group by fc.SWITCH_NAME)
FROM
ORS.SWITCH_OPERATIONS sw,
ORS.TRACK_EVENT TRACK_EVENT
WHERE
sw.SEQUENCE_ID = TRACK_EVENT.SEQUENCE_ID
Not only are subqueries in the SELECT list required to return exactly one row (or any time they're used for a singular comparison, like <, =, etc), but their use in that context tends to make the database execute them RBAR - Row-by-agonizing-row. That is, they're slower and consume more resources than they should.
Generally, unless the result set outside the subquery contains only a few rows, you want to construct subqueries as part of a table-reference. Ie, something like:
SELECT m.n, m.z, aliasForSomeTable.a, aliasForSomeTabe.bSum
FROM mainTable m
JOIN (SELECT a, SUM(b) AS bSum
FROM someTable
GROUP BY a) aliasForSomeTable
ON aliasForSomeTable.a = m.a
This benefits you in other ways to - it's easier to get multiple columns out of the same table-reference, for example.
Assuming that LISTAGG(...) can be included with other aggregate functions, you can change your query to look like this:
SELECT Track_Event.location, Track_Event.element_name,
Counted_Events.counter,
Failure.fail_count, Failure.failure_date, Failure.descrip
FROM ORS.Track_Event
JOIN ORS.Switch_Operations
ON Switch_Operations.sequence_id = Track_Event.sequence_id
LEFT JOIN (SELECT element_name, COUNT(*) AS counter
FROM ORS.Track_Event
WHERE element_type = 'SWITCH'
AND event_type = 'I'
AND element_state IN ('NORMAL', 'REVERSE')
GROUP BY element_name) Counted_Events
ON Counted_Events.element_name = Switch_Operations.swicth_name
LEFT JOIN (SELECT switch_name,
COUNT(CASE WHEN no_correspondence = 1 THEN '1' END) AS fail_count,
MAX(CASE WHEN no_correspondence = 1 THEN command_time END) AS failure_date,
LISTAGG(description, ';' || CHAR(10)) WITHIN GROUP (ORDER BY command_time) AS descrip
FROM ORS.Switch_Operations
GROUP BY switch_name) Failure
ON Failure.switch_name = Track_Event.element_name
This query was written to (attempt to) preserve the semantics of your original query. I'm not completely sure that's what you actually need but without sample starting data and desired results, I have no way to tell how else to improve this. For instance, I'm a little suspicious of the need of Switch_Operations in the outer query, and the fact that LISTAGG(...) is run over row where no_correspondence <> 1. I did change the ordering of LISTAGG(...), because the original column would not have done anything (because the order way the same as the grouping), so would not have been a stable sort.
Single-row subquery returns more than one row.
This error message is self descriptive.
Returned field can't have multiple values and your subquery returns more than one row.
In your complete query you specify fields to be returned. The last field expects single value from the subquery but gets multiple rows instead.
I have no clue about the data you're working with but either you have to ensure that subquery returns only one row or you have to redesign the wrapping query (possibly using joins when appropriate).
My query below is doubling the amount on the last record it returns. I have 3 tables - activities, bookings and tempbookings. The query needs to list the activities and attached information and pull the total number (using the SUM) of places booked (as BookingTotal) from the booking table by each activity and then it needs to calculate the same for tempbookings (as tempPlacesReserved) providing the reservedate field inside that table is in the future.
However the first issue is that if there are no records for an activity in the tempbookings table it does not return any records for that activity at all, to get around this i created dummy records in the past so that it still returns the record, but if I can make it so I don't have to do this I would prefer it!
The main issue I have is that on the final record of the returned results it doubles the booking total and the places reserved which of course makes the whole query useless.
I know that I am doing something wrong I just haven't been able to sort it, I have searched similar issues online but am unable to apply them to my situation correctly.
Any help would be appreciated.
P.S. I'm aware that normally you wouldn't need to fully label all the paths to the databases, tables and fields as I have but for the program I am planning to use it in I have to do it this way.
Code:
SELECT [LeisureActivities].[dbo].[activities].[activityID],
[LeisureActivities].[dbo].[activities].[activityName],
[LeisureActivities].[dbo].[activities].[activityDate],
[LeisureActivities].[dbo].[activities].[activityPlaces],
[LeisureActivities].[dbo].[activities].[activityPrice],
SUM([LeisureActivities].[dbo].[bookings].[bookingPlaces]) AS 'bookingTotal',
SUM (CASE WHEN[LeisureActivities].[dbo].[tempbookings].[tempReserveDate] > GetDate() THEN [LeisureActivities].[dbo].[tempbookings].[tempPlaces] ELSE 0 end) AS 'tempPlacesReserved'
FROM [LeisureActivities].[dbo].[activities],
[LeisureActivities].[dbo].[bookings],
[LeisureActivities].[dbo].[tempbookings]
WHERE ([LeisureActivities].[dbo].[activities].[activityID]=[LeisureActivities].[dbo].[bookings].[activityID]
AND [LeisureActivities].[dbo].[activities].[activityID]=[LeisureActivities].[dbo].[tempbookings].[tempActivityID])
AND [LeisureActivities].[dbo].[activities].[activityDate] > GetDate ()
GROUP BY [LeisureActivities].[dbo].[activities].[activityID],
[LeisureActivities].[dbo].[activities].[activityName],
[LeisureActivities].[dbo].[activities].[activityDate],
[LeisureActivities].[dbo].[activities].[activityPlaces],
[LeisureActivities].[dbo].[activities].[activityPrice];
Your current query is using an INNER JOIN between each of the tables so if the tempBookings table has no records, you will not return anything.
I would advise that you start to use JOIN syntax. You might also need to use subqueries to get the totals.
SELECT a.[activityID],
a.[activityName],
a.[activityDate],
a.[activityPlaces],
a.[activityPrice],
coalesce(b.bookingTotal, 0) bookingTotal,
coalesce(t.tempPlacesReserved, 0) tempPlacesReserved
FROM [LeisureActivities].[dbo].[activities] a
LEFT JOIN
(
select activityID,
SUM([bookingPlaces]) AS bookingTotal
from [LeisureActivities].[dbo].[bookings]
group by activityID
) b
ON a.[activityID]=b.[activityID]
LEFT JOIN
(
select tempActivityID,
SUM(CASE WHEN [tempReserveDate] > GetDate() THEN [tempPlaces] ELSE 0 end) AS tempPlacesReserved
from [LeisureActivities].[dbo].[tempbookings]
group by tempActivityID
) t
ON a.[activityID]=t.[tempActivityID]
WHERE a.[activityDate] > GetDate();
Note: I am using aliases because it is easier to read
Use new SQL-92 Join syntax, and make join to tempBookings an outer join. Also clean up your sql with table aliases. Makes it easier to read. As to why last row has doubled values, I don't know, but on off chance that it is caused by extra dummy records you entered. get rid of them. That problem is fixed by using outer join to tempBookings. The other possibility is that the join conditions you had to the tempBookings table(t.tempActivityID = a.activityID) is insufficient to guarantee that it will match to only one record in activities table... If, for example, it matches to two records in activities, then the rows from Tempbookings would be repeated twice in the output, (causing the sum to be doubled)
SELECT a.activityID, a.activityName, a.activityDate,
a.activityPlaces, a.activityPrice,
SUM(b.bookingPlaces) bookingTotal,
SUM (CASE WHEN t.tempReserveDate > GetDate()
THEN t.tempPlaces ELSE 0 end) tempPlacesReserved
FROM LeisureActivities.dbo.activities a
Join LeisureActivities.dbo.bookings b
On b.activityID = a.activityID
Left Join LeisureActivities.dbo.tempbookings t
On t.tempActivityID = a.activityID
WHERE a.activityDate > GetDate ()
GROUP BY a.activityID, a.activityName,
a.activityDate, a.activityPlaces,
a.activityPrice;