This is an odd question, in that I'm not trying to display a page in EnterpriseMode - I'm trying to prevent it from displaying in EnterpriseMode. I'm assisting the Webserver team, so my access is limited to only changes in the page itself.
The twist is that the rest of the domain has to be displayed in EnterpriseMode, save for this one page.
I've tried utilizing an XML document and changing HKLM\software\microsoft\internet explorer\main\enterprisemode -- setting SiteList to my file location on the local machine, and Enabled to blank. The page ignores this and loads itself into EnterpriseMode anyways.
Example of my Site.XML. Note: I've changed the server name to protect the innocent. Also I'm having to use the escape characters so the note quits trying to interact with my example. I could've sworn code block should've stopped that.
<rules version="1">
<emie>
<domain exclude="false">internalportal.ExampleServer.com<path exclude="true">/OperationsRecap/</path></domain>
</emie>
</rules>
I've tried the same thing in the HKCU key, and even checked gredit for anything that might be pushing it to default. No such luck. This should be a fairly simple procedure, but it's stumping me. I'm starting to wonder if the Webserver team has a customHeader stuck in web.config, but I don't have access and I've been waiting for an answer from them for a few days now. And by 'waiting' I mean 'continually hounding'.
Compatibility mode doesn't seem to make a difference, whether its on or off. I've several sites with different settings that get the same problem - and then several sites with different settings that do not get that problem. There does not appear to be a rhyme or reason in terms of configuration on the local machines. So while it's tempting to call it an issue with IIS7 web.config and dust my hands of the whole thing, I have to be absolutely certain.
I've dug at the source code, and literally the only difference is in the META tag. Those that load correctly load X-UA-Compatible as IE=Edge, like they're supposed too. Those that do not load as IE=8, despite all my attempts to force them to stop that. In fact, when it fails to load I can go to tools on the IE11, de-select EnterpriseMode, and it reloads just fine. The META tag changes as well in the source. Again, whether compatibility mode is on or off, whether there's a list in play, utterly ignoring any changes I make to EnterpriseMode key.
Thoughts?
Found the answer. I was looking in HKLM\software\microsoft\internet explorer\main\EnterpriseMode
I should have been looking in hklm\software\policies\microsoft\internet explorer\main\EnterpriseMode
Lesson learned, stupid mistake.
Related
If I make an edit to a Trac ticket, but someone beat me to it, this message is displayed:
Ideally, I would read this message and figure out what I can overwrite and what I should not. But, depending on this message to keep users from overwriting what was submitted is not something that we should depend on:
This may sound a little harsh, but you'll see, when you do usability tests, that there are quite a few users who simply do not read words that you put on the screen. If you pop up an error box of any sort, they simply will not read it.
Is there a better way to prevent these overwrites in Trac - e.g., if a ticket has been modified while you were modifying it, you must refresh the page, etc?
Yes, if the server would send the page modified outside and if the javascript running in your browser could merge that into your local changes. But noone has implemented it in the current trac.
I've found something strange with my employee document, it turns out that all files including document are being encrypted with ".vvv" extension. What I've found so far that it's called TeslaCrypt, it convert all my files to .vvv, even I rename it back to the right extension, it says that file already modified, so I can't open the files anymore. Please help, we cannot work until that document can be oppened. I can't tag this to "TeslaCrpyt" so if anyone can help me tagged it, it would be great.
content on how to recover :
What happened to your files ?
All of your files were protected by a strong encryption with RSA-4096.
More information about the encryption keys using RSA-4096 can be found here: http://en.wikipedia.org/wiki/RSA_(cryptosystem)
What does this mean ?
This means that the structure and data within your files have been irrevocably changed, you will not be able to work with them, read them or see them,
it is the same thing as losing them forever, but with our help, you can restore them.
111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
How did this happen ?
---Specially for your PC was generated personal RSA-4096 KEY, both public and private.
---ALL YOUR FILES were encrypted with the public key, which has been transferred to your computer via the Internet.
111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
Decrypting of your files is only possible with the help of the private key and decrypt program, which is on our secret server.
What do I do ?
So, there are two ways you can choose: wait for a miracle and get your price doubled, or start obtaining BTC NOW, and restore your data easy way.
If You have really valuable data, you better not waste your time, because there is no other way to get your files, except make a payment.
For more specific instructions, please visit your personal home page, there are a few different addresses pointing to your page below:
1. http://vr6g2curb2kcidou.encpayment23.com/E03029AB7D9A9D38
2. http://vr6g2curb2kcidou.expay34.com/E03029AB7D9A9D38
3. http://psbc532jm8c.hsh73cu37n1.net/E03029AB7D9A9D38
4. https://vr6g2curb2kcidou.onion.to/E03029AB7D9A9D38
If for some reasons the addresses are not available, follow these steps:
1. Download and install tor-browser: http://www.torproject.org/projects/torbrowser.html.en
2. After a successful installation, run the browser and wait for initialization.
3. Type in the address bar: vr6g2curb2kcidou.onion/E03029AB7D9A9D38
4. Follow the instructions on the site.
IMPORTANT INFORMATION:
Your personal pages:
http://vr6g2curb2kcidou.encpayment23.com/E03029AB7D9A9D38
http://vr6g2curb2kcidou.expay34.com/E03029AB7D9A9D38
http://psbc532jm8c.hsh73cu37n1.net/E03029AB7D9A9D38
https://vr6g2curb2kcidou.onion.to/E03029AB7D9A9D38
Your personal page (using TOR-Browser): vr6g2curb2kcidou.onion/E03029AB7D9A9D38
Your personal identification number (if you open the site (or TOR-Browser's) directly): E03029AB7D9A9D38
111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
I've published a decryption tool on GitHub: https://github.com/googulator/teslacrack
This tool cryptographically breaks the encryption scheme of TeslaCrypt, and so doesn't require a saved master key. However, it's quite computationally intensive, so preferably use a fast computer, and even then, expect to wait up to a week for it to recover your key (although most keys can be found in just a few hours). Also, it's more of a PoC than a user-friendly turnkey decryptor, so you will need to do many things by hand.
I got hit by TeslaCrypt and all of the solutions (Cisco's Decrypt Tool, Shadow Explorer) did not work for me. Unrelated, I was sniffing around some articles on Ubuntu and found BloodDolly's Tesla Decrypter tool that actually work and my files are being restored as I write this. So just wanted to share since it didn't come up in any of my earlier searches.
It's a handful a steps,...I had no problems whatsoever with the process. Apparently this won't work for the most recent strain,...I had .vvv and had to factor primes with Yafu,...but the documentation and the software is pretty thorough and easy to follow. Took me 15-20 minutes from start to finish.
http://www.bleepingcomputer.com/forums/t/576600/tesladecoder-released-to-decrypt-exx-ezz-ecc-files-encrypted-by-teslacrypt/
Anyway, hope this helps some folks.
I got problem with my company internal extension. They don't want to publish it, as it does gather data on external server. So I need to host it myself... but would like not to lose ability of autoupdate.
As far as I read I need to use update_url in manifest, but nothing more is said in Opera documentation...
"update_url": "http://path/to/updateInfo.xml", - as it is said in documentation page
Ok... and what should I put in that xml? Will it autoupdate or just notify users about new updates? Where do I put rest of updated files?
I tried to concat Opera itself about this question, but they don't give any contact information except something like if you have problem, ask on stackoverflow... so here I am.
If it does not work, I was thinking about really BAD method, using unsafe-eval and keeping newest version in local storage... but would rather like to avoid that.
In general the behavior is the same as for Chrome. You can base on this document: https://developer.chrome.com/extensions/autoupdate
Good evening everyone! Thank you for opening this post.
I currently bought myself the ProCDN from MediaTemple (basically EdgeCast) and have setup a CDN where now I go to cdn-small.DOMAIN.com (or cdn-large.DOMAIN.com) it loads the normal website just fine...
However, I'm not sure which one to use.. Would I use this for the whole complete site to optimize, or use the links to add one by one for each script/stylesheet based on file size? (e.g. All JS/CSS will have the cdn-small while anything larger such as 300kb will have the cdn-large link)
And to say, if the correct way is to load the whole site as one link (e.g. everything is linked normally like js/jquery.js instead of a full link like https://cdn-small.domain.com/js/jquery.js).. Would I set a redirect from DOMAIN.com to cdn-small.DOMAIN.com for the best loading and that they only need to type in the domain not the full sub-CDN-domain?
Apologize if this isn't making sense or anything, but trying to do my best. To put it much more simple terms again is that I'm trying to find the best way to use my cdn-small/cdn-large for my website by having the user enter in the domain (https:// or http://) normally to serve my content as fast as possible near the user.
Kindly appreciate your time for reading this and wish you all a positive weekend.
Here is my live site if it even matters or want to experiement; http://bit.ly/1eGCShX
I need to display pages in a tutorial fashion. I looked in to netsupport, beamyourscreen and other possibilities but, I do not want the viewers to download anything. I cannot use gd / send screenshots due to audio / video instructions embedded in some of the pages.
Basically, I need the ability to "refresh" a users browser window to a different page via an interface on my end. Whether via a form submission, javascript or any other type of "controller" that allows me to change the page on the viewers browser. PERL preferred but, PHP / javascript whatever works and is cross browser. I set up a simple javascript page forward timer that "works" but, page load times and conversation interruptions are a huge factor.
The entire tutorial website will be developed around this ability.
I was looking in to curl / cron / wget methods but, found little information.
I have seen forum and chat scripts that basically perform a similar task but, there must be a simple(ish) solution in leau of hacking up another script to suit my needs.
I do not want others to control the pages either. The site really, only needs to be accessable during the tutorial however, It "could" remain web accessable as long as user interaction was normal unless (being controlled).
The initial site concept is based on instructing people how to properly introduce new pets into a home. Will be operated by a veteranarian that saved my pets life. I wanted to give something back.
Possible? I really appreciate simple examples etc...
You have no other way but to keep polling the server for "instructions" using javascript. No, you can't send nothing to the end user browser, neither curl nor wget.
Mainly, you'll have to set up a simple request/response protocol between the browser and the server.
If you want to go deeper, you can use something like cometd/meteord/etc. If not, a hidden iframe that reloads himself and receives pages with javascript code for the needed actions can do the trick.
Another alternative.
With javascript dopolling and single character flatfile. Have a simple one character flatfile with a single var. Write it in perl (it is faster and uses less resources than php). The parent script calls a javascript variable in a flatfile. It hits the flatfile and goes wherever the var sets it. The flatfile is written to by the controller. Done.
I guess you could also rename an empty flatfile and use that as the controller. I am usure which is faster, open and read a specific file or hit the directory and return the file name. On the controller side, opening and writing to a file vs renaming a file. Maybe they counter each other in resources and time?
This way the site can act as a normal site. When you want to have remote users see a "presentation" (automatically being shown the site pages at the controllers pace), the controller activates polling and tells the viewers to push a start button. This allows a remote instructor to load pages for the viewers at his leisure.
It is a simple solution that works with nothing really sophisticated going on. No frames are needed either. Just need javascript enabled.
Any better suggestions are welcome!
It occurred to me that what you might want to use is HTML Push technology. Check out the wiki, they have several links. I have never used it myself