Using JGRASP for c++ program. The program compiles and links with no errors. When I try to run I get "wedge2 error: could not run ("c:\mplot\mplot.exe").
The .exe file exists in that directory ! Anyone understand this error?
What happens if you try to run it from Windows Explorer or from the command prompt?
Related
When I try to run my executable (.exe) from the command window it works fine, but nothing happens when using the same commands in LabView's system exec VI. What do I need to change in my labview program?
I have tried calling the executable directly from the VI's command line, and have tried adjusting/deleting the working directory. I have not been able to start the .exe successfully yet.
You use "standard input" parameter in an incorrect way. Try this:
I am learning appium and I have set up everything that is required. I have setup paths, installed android studio, run appium and created a virtual android device too. But when i am writing uiautomatorviewer its giving me an error
mac#Macs-MacBook-Pro ~ % uiautomatorviewer
-Djava.ext.dirs=/Users/mac/Library/Android/sdk/tools/lib/x86_64:/Users/mac/Library/Android/sdk/tools/lib is not supported. Use -classpath instead.
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
mac#Macs-MacBook-Pro ~ %
Can anyone help me please
A. I encountered this issue once, sometime env var doesn't load and it throws error, open and load bash profile and run that command.
open ~/.bash_profile
source ~/.bash_profile
uiautomatorviewer
B. if appium server is running, try to close it and run the command.
Try the following command:
sudo ./uiautomatorviewer
I have just installed MSys2 (https://msys2.github.io, msys2-x86_64-20150916.exe) on my Windows 10 computer.
Once installed, the terminal is launched. But as soon as I stop it and relaunch it, I get the error: "Failed to run /sbin/nologin: No such file or directory".
Any idea on what to do?
You should figure out why Bash is trying to run /sbin/nologin. Check your Windows home directory (e.g. C:\Users\Joe) for files like .bash_profile, .profile, and .bashrc. Inspect those files and find which one is calling nologin.
If that doesn't help, try creating an empty file in C:/msys64/sbin/nologin, or wherever you actually installed MSYS2. An empty file would be a valid shell script and run without errors.
If the error is non-fatal you might consider just ignoring it.
Here is the related error its showing:
java.exe is not a recognized file as an internal or external command,
operable or external command
errorlevel=9009
i was getting the same error on WIndows 8.1(64 bit) and checked java path but it was ok
so i just run my jmeter.bat with Run as Administrator and it worked for me
Many operating systems have an environment variable such as PATH that contains a list of directories (or folders) to be searched when looking for a command to execute. Commands that can be found via the PATH are commonly called external commands. The program that reads the command line or the batch file and invoked the commands may have a number of built in commands, these are commonly called internal commands.
I suggest you examine the PATH (or equivalent) set when your java command executes from the command line and also when execution is attempted from the batch file. Compare the two and make sure the directory containing your java.exe is in the PATH.
Does not work with Java 9 beta:
Running:
C:\java -version
Gives:
java version "9-ea"
Just go into command line and run:
java -jar ApacheJMeter.jar
Set the correct Java Path (installed in your system) in Computer -> Advanced System settings -> Environment Variables -> Ok -> System Variables -> Path
I got the same issue and resolved by following the above steps.
I tried everything, this eventually worked.
Within System Variables:
PATH = "C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jdk1.8.0_101\bin"
May help someone.
This error occurs due to the path has not been set properly.
Either you can set it in environmental varialables or right click jmeter .bat file,choose edit set the path their,for reference see the jmeter.apache.org user manuals.
For me, my Java path has a space in it and jmeter said it can't find Java
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Home
.. I looked at the jmeter.sh script and saw it got the path from "Plugin-Ins" .. onward. I tried just commenting out the exit command after that check in the script .. and then I was able to run jmeter.
So apparently the validation logic has a bug, where the error message about can't find java is in fact not true (if Java is indeed set up correctly), so it can be ignored.
For windows 8.1 Users:
Error when trying to run jmeter.bat
Error message:
Not able to find Java executable or version. Please check your Java installation. errorlevel=2
Press any Key to continue
Resolution:
Right Click jmeter.bat and Run as Administrator.
This worked for me, hope this helps. Good luck
Set the correct JM_LAUNCH variable to java.exe
For Windows XP users set Java environment by following the steps here:
http://www.tutorialspoint.com/jmeter/jmeter_environment.htm
Note the path depends on your installed JDK.
And download the file from:
https://svn.apache.org/repos/asf/jmeter/trunk/bin/jmeter.bat
Then replace your jmeter.bat with the downloaded file.
If you have installed Java and still you get this error, please set the java_home path to below using typing below command in terminal:
export JAVA_HOME="/Library/InternetPlugIns/JavaAppletPlugin.plugin/Contents/Home"
Since I run many versions of Java.. I modified jmeter.bat.
rem JM_START - set this to "start" to launch JMeter in a separate window
rem this is used by the jmeterw.cmd script.
rem
rem =====================================================
setlocal
rem Minimal version to run JMeter
set MINIMAL_VERSION=1.8.0
set PATH=%PATH%;C:\Program Files (x86)\IBM\Java80\jre\bin <<< add This line to jmeter.bat
Copied the JAVA executable from Installed version of Java from C:\Program FilesJava\jdk1.8.0_191\bin and pasted in the folder where the jmeter bat resides and it worked for me.
Not exactly the same issue but somebody might find it helpful
Do not double click jmeter.bat but instead ApacheJMeter.jar in the same directory
For me jmeter.bat run but for a brief moment closing almost immediately and not prompting any error. Above workaround allowed me to start working
if JAVA -version shows as blank or empty in the command prompt (CMD) then you need to clear the all java paths in environment variable and again add JAVA_HOME=C:\Program Files\Java\jdk-11.0.15.1
path= C:\Program Files\Java\jdk-11.0.15.1\bin;
if you see C:\Program Files\Common Files\Oracle\Java\javapath; like this remove this
and try in new CMD prompt then Java -version will work.
I am trying to register with regsvr32.exe the prnadmin.dll (on a Win7 target machine) but i get this error 0x80020009
Any suggestions please?
regsvr32.exe needs to be run as an administrator. Maybe this was the cause?
For Windows Vista/Windows 7 users:
Click Start>All Programs>Accessories, then right-click on “Command Prompt” and select “Run as Administrator”
Type in the following command exactly as you see it and press ENTER.
secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose
Wait for the command to complete, it can take some time so please be patient.
Once the command has completed, try to register a dll file again.
For Windows Vista/Windows 7 users: Click Start > All Programs > Accessories, then right-click on Command Prompt and select Run as Administrator.
Best method I have found is to open the PowerShell ise with administration rights then cd to c:\ and insert your command, for example
regsvr32 "c:\Program Files\Windows Media Player\wmpband.dll"
For Windows Vista/Windows 7 users: Click Start > All Programs > Accessories, then right-click on Command Prompt and select Run as Administrator.
Then type: regsvr32 filelocation\fileName
Then you see that file which generate error is loadded successfully.
I had a similar problem with our Office COM addin. Visual Studio 2019 could successfully build the C++ code, but the registration failed with the above error code.
Solution was: Some files had a "wrong" file encoding (UTF8-BOM) instead of (UTF8) and after I changed the file encodings everything worked as expected.
http://support.microsoft.com/kb/2466246
You'll need to use the 32bit version of regsvr32 as mentioned in the article.