I have a query that give me this results:
Barcode
---------
512364
012474
111457
And I need to print each result in a new page.
Why don´t you use CHR(12) to to do it?
It´s a hardcode for PAGE-FEED.
I solve my problem at this way:
It is not necessary to create a
separate XRBarcode control manually in code for each data row.
To accomplish this task, bind your report to your SQL query, put the
XRBarcode control into the report's Detail band, and bind the
XRBarcode.Text property to the "Barcode" field. After that, set the
Detail band's PageBreak property to the 'AfterBand' value so each new
BarCode would start on a new page.
Related
in my Access application I have a form and a report. In the form I have my textBoxForm, in the report I have my textBoxReport. Normally, in the textBoxReport I see the textBoxForm value. How can I set dynamically from the report VBA-code the value of the textReport? For example, I want that, if the value in the textForm is 1, the value in the textReport is "ok".
I have already searched a solution in internet, but in all cases I see always an error similar to 'impossible set this value for this element'.
Thank you!
Does your report use a query? If so, you would just place an 'IIF' in the query that tests for the value you want to change, then either changes it to something else, or retains the original value. The below will test field 'Nbr1' for the presence of a 1, and if found, change it to 'OK', otherwise it stays the same.
Note! You will need to change the control source in the report to reflect the name you provide (i.e. 'MyChange') because you can't keep the original name.
SELECT Table1.ID, Table1.EMPID, Table1.TestResult,
IIf([Nbr1]=1,"OK",[Nbr1]) AS MyChange, Table1.Nbr2
FROM Table1;
I am trying to make the table component with the button inside the table column in CDE Pentaho. How can it be achieved?
I guess it will need some work.
In the Draw function of your table, you may put some javascript to manipulate the DOM and add your button : as far as I remember, the draw function receives a parameter that is a structure with the column and row index of the current cell.
Try first this code in the draw function :
function(paramdraw) {
console.log(paramdraw);
}
and look for the content of paramdraw iin the console.
Maybe there is a better way to do it...
What we do here usually is something like editing the query on the datasource with a column that output the HTML code for a button.
SELECT
ID,
NAME,
concat('<input type="button" onclick="alert(',ID,')">click me</input>') as button
FROM
foo
WHERE
bar='bar';
That should display a button. If you are not using a query as datasource, but a transformation the idea is the same. Just make the output contains a string that when interpreted by the browser is a button.
Hope it helps. =)
I am doing my project in Vb.net using MVC 4.0
I have created dynamic table and in that textboxes in td using javascript and now i want to get that table's total row and column as well for further process in Controller function.
How I can get using above using VB.net?
I have used Request.Form but the id of the textboxes in table is created uniquely so first I want to find the total column and row so based on that I can move further and check using for loop.
It seems like if you are generating your table through javascript you should also be able to set the value of a hidden field to the value you are outputting to your totals column. If you created a hidden field with the value set you should be able to access it from the Request collection. If it is not actually in a field that gets posted back you will only be able to access the value from the client-side.
document.getElementById("myInput").value = "Value you are outputting to your "total" cell
[Solved]
I got all the controls on code behind by it's name by using FormCollection just i need to do is post back the form using form action method because with using ajax i am not getting the formcollection in code behind but directly using form action method i can get all the controls name.
These are the textbox ids by which i can get the value just need to do further process like:
For Each _formvalues As String In formcol
formcol(_formvalues)
Next
fomcol is an object of FormCollection,_formvalues is used for moving one by one name coming in formcol and to take the data inside means name just write formcol(_formvalues) that's it.
My query returns location_cd(string) and item_count(int). I only need certain rows from the result however and I need them to display in specific places in my layout so I don't think the table solution is going to work. Can I determine where I place the value for a particular row of the result set?
I am using a grid to display values for a number of fields. I cannot seem to be able to get the values from the results to show. The grid is bound to the result set. I even tried binding the cells to the result set but that didn't work either.
I checked in the query editor and there is a result set shown in the Preview so I know the query works. The complete and correct result set shows if I put a table on the page.
I tried inserting a Dynamic Text or Data object in a cell and used the expression:
dataSetRow["location_cd"]=="3SD"?dataSetRow["item_count"]:""
This returns a blank and does not seem to evaluate. I tested it with :
dataSetRow["location_cd"]=="3SD"?dataSetRow["item_count"]:"BLANK"
and got 'BLANK' to appear in that cell.
dataSetRow["location_cd"] and dataSetRow["item_count"] will display the location_cd and item_count from the first row of the result set. row.outer[] did the same thing. Obviously I am just hacking at this report at this point.
A co-worker suggested that she uses a JAVA if-statement in places like this but I could not get that to work either.
Any ideas or suggestions that will get me on the right road??
Thanks
An elegant option would be to use a HashMap storing the result of the dataset.
Declare a report variable named "values", with a new hashmap as default value (see image below)
Fill values in the onFetch script of the dataset: vars["values"].put(row["location_cd"],row["item_count"]);
Insert new data elements at any place of the report with expressions such: vars["values"].get("myFavoriteLocationCD");
Though it is important to note the dataset should be triggered by the report before these data elements.
The particular row you want to display you specify in a "Text" field inside your grid. Just drag and drop a "Text" field inside your grid. If you bound the fields you want to display to your grid, the "Text" field inside the grid inherits the bindings of its parent (the grid), so you can access the bindings automatically in the "Text" field.
You could try following steps, maybe that works.
Don't use "Dynamic Text" field, instead use a regular "Text" field
Ensure the fields of your query which you use, are bound to the grid (you sayed you already did)
Open the "Text" field
Change preselected pull-down entry "Auto" into "HTML"
Change preselected pull-down entry "Formatting" into "Dynamic Text"
Wrap your code in <value-of format="HTML"> your code goes here... </value-of>
Note: You should check in the "Expression Builder" of your "Text" field if you are able to access the fields you bound to the grid. If they are not available sth. went wrong with your binding. Avoid binding query records to cells this will drive you crazy.
If you want to display a list, ensure you didn't set a constant height in the row of your grid. Set the height to 100% than the row takes its height dynamically.
What about the idea to optimize your query, that only get the results you want are displayed, than you don’t need to filter them with java script? If you don’t need the filtered results in another place this would be the cleaner solution in my opinion.
I have managed to set a dataset to my tablix on my report viewer that will hold all items belonging to a bill. The issue I present you with is I cannot seem to add any parameters to my textboxes in my .rdlc report. Is this because I have added a connection to my database? Before I added my connection I could easily add parameters, but not anymore. Take a look at my report:
All the red rectangles is where I would usually have my parameters. Is there a way to programmatically do this?
Dim rpJobNum = New ReportParameter("tbJobNo", JobNum)
rv.rvRdlc.LocalReport.SetParameters(rpJobNum)
rv is my report viewer form
rvRdlc is my report viewer control
tbJobNo is my textbox' job number name
JobNum is a variable which holds the respective value (ex: 10000)
If I execute that,I will receive an error:
Any idea why I cannot seem to add any parameter controls? Perhaps there's another way of doing this?
Figured out why I couldn't add parameters. Pretty noob stuff on my part.
Go to View > Report Data
Or... Ctrl + Alt + D
My apologies, but, I'll answer this if it can help someone!
Dim parmlist As New List(Of ReportParameter)()
parmlist.Add(New ReportParameter("tbJobNo ", JobNum))
print.ReportViewer1.LocalReport.SetParameters(parmlist)
you need to create a list, as i did here