I've wrote this simple script, it generates one output line per second (generator.sh):
for i in {0..5}; do echo $i; sleep 1; done
The raku program will launch this script and will print the lines as soon as they appear:
my $proc = Proc::Async.new("sh", "generator.sh");
$proc.stdout.tap({ .print });
my $promise = $proc.start;
await $promise;
All works as expected: every second we see a new line. But let's rewrite generator in raku (generator.raku):
for 0..5 { .say; sleep 1 }
and change the first line of the program to this:
my $proc = Proc::Async.new("raku", "generator.raku");
Now something wrong: first we see first line of output ("0"), then a long pause, and finally we see all the remaining lines of the output.
I tried to grab output of the generators via script command:
script -c 'sh generator.sh' script-sh
script -c 'raku generator.raku' script-raku
And to analyze them in a hexadecimal editor, and it looks like they are the same: after each digit, bytes 0d and 0a follow.
Why is such a difference in working with seemingly identical generators? I need to understand this because I am going to launch an external program and process its output online.
Why is such a difference in working with seemingly identical generators?
First, with regard to the title, the issue is not about the reading side, but rather the writing side.
Raku's I/O implementation looks at whether STDOUT is attached to a TTY. If it is a TTY, any output is immediately written to the output handle. However, if it's not a TTY, then it will apply buffering, which results in a significant performance improvement but at the cost of the output being chunked by the buffer size.
If you change generator.raku to disable output buffering:
$*OUT.out-buffer = False; for 0..5 { .say; sleep 1 }
Then the output will be seen immediately.
I need to understand this because I am going to launch an external program and process its output online.
It'll only be an issue if the external program you launch also has such a buffering policy.
In addition to answer of #Jonathan Worthington. Although buffering is an issue of writing side, it is possible to cope with this on the reading side. stdbuf, unbuffer, script can be used on linux (see this discussion). On windows only winpty helps me, which I found here.
So, if there are winpty.exe, winpty-agent.exe, winpty.dll, msys-2.0.dll files in working directory, this code can be used to run program without buffering:
my $proc = Proc::Async.new(<winpty.exe -Xallow-non-tty -Xplain raku generator.raku>);
I need to get the number of processor cores available on a computer programmatically from within MS Access. As an example, the computer I work from most frequently has one processor with 6 cores. I want to grab the number '6' through VBA.
Thus far, I have found two ways to find this information through CMD. (1) I can execute the line echo %NUMBER OF PROCESSORS% and the result is 6 (simple and clean, I like it). (2) I have also tried wmic cpu get numberorcores, but the result of that prompt is as follows:
NumberOfCores
6
I intend to pipe the output to and read from the clipboard. The reason I use the clipboard is to avoid creating, reading, and deleting little text files of data. Prompt (2) works, I can successfully pipe the output to the clipboard and read it into a variable in VBA, but it's messy and I would have to parse the result to get the information I need. I would much prefer using prompt (1), but it's not working and the problem seems to be echo. I have tried using shell() and CreateObject(WScript.Shell).Run without success. The strings I have used to try to execute the echo prompt are as follows:
str = "echo %NUMBER OF PROCESSORS% | clip"
str = "cmd ""echo %NUMBER OF PROCESSORS% | clip"""
So, is there a way to successfully send an echo prompt to CMD through VBA and get a result?
Alternatively, is there a different way in VBA to get the number of cores?
TIA!
Why not keep it simple like this:
Dim result As Variant
result = Environ("NUMBER_OF_PROCESSORS")
Debug.Print "Number of processors is " & result
Expect script query:
In one of my expect script I have to pick keyword from output of send command and store in a file, could some one help me.
send "me\n"
output :
EM/X Nmis Ssh Session/2; Userid =
Impact = ; Scope = ; CustomerId = 0
Here I want to pick keyword : Nmis Ssh Session/2
and my target is to create new command in expect script is :
send "set Nmis Ssh Session/2 \n"
so this value : Nmis Ssh Session/2 should store in a variable. Could some one help me.
I'm not quite sure exactly what information is produced by which side, but maybe something like this will do:
expect -re {EM/X ([^;]+);}
set theVariable $expect_out(1,string)
The key is that we use the -re option to pass a regular expression to the expect command. That makes the text that matches what is in the parentheses (a sequence of non-semicolon characters) be stored in the variable expect_out(1,string) (there are many other things stored in the expect_out array; see the documentation). Copying it from there to a named variable for the purpose of storage and further manipulation is trivial.
I do not know if the RE is the right one; there's something of an art in choosing the right one, and it takes quite a lot of knowledge about what the possible output of the other side could be.
I have a problem with ksh in that a while loop is failing to obey the "while" condition. I should add now that this is ksh88 on my client's Solaris box. (That's a separate problem that can't be addressed in this forum. ;) I have seen Lance's question and some similar but none that I have found seem to address this. (Disclaimer: NO I haven't looked at every ksh question in this forum)
Here's a very cut down piece of code that replicates the problem:
1 #!/usr/bin/ksh
2 #
3 go=1
4 set -x
5 tail -0f loop-test.txt | while [[ $go -eq 1 ]]
6 do
7 read lbuff
8 set $lbuff
9 nwords=$#
10 printf "Line has %d words <%s>\n" $nwords "${lbuff}"
11 if [[ "${lbuff}" = "0" ]]
12 then
13 printf "Line consists of %s; time to absquatulate\n" $lbuff
14 go=0 # Violate the WHILE condition to get out of loop
15 fi
16 done
17 printf "\nLooks like I've fallen out of the loop\n"
18 exit 0
The way I test this is:
Run loop-test.sh in background mode
In a different window I run commands like "echo some nonsense >>loop_test.txt" (w/o the quotes, of course)
When I wish to exit, I type "echo 0 >>loop-test.txt"
What happens? It indeed sets go=0 and displays the line:
Line consists of 0; time to absquatulate
but does not exit the loop. To break out I append one more line to the txt file. The loop does NOT process that line and just falls out of the loop, issuing that "fallen out" message before exiting.
What's going on with this? I don't want to use "break" because in the actual script, the loop is monitoring the log of a database engine and the flag is set when it sees messages that the engine is shutting down. The actual script must still process those final lines before exiting.
Open to ideas, anyone?
Thanks much!
-- J.
OK, that flopped pretty quick. After reading a few other posts, I found an answer given by dogbane that sidesteps my entire pipe-to-while scheme. His is the second answer to a question (from 2013) where I see neeraj is using the same scheme I'm using.
What was wrong? The pipe-to-while has always worked for input that will end, like a file or a command with a distinct end to its output. However, from a tail command, there is no distinct EOF. Hence, the while-in-a-subshell doesn't know when to terminate.
Dogbane's solution: Don't use a pipe. Applying his logic to my situation, the basic loop is:
while read line
do
# put loop body here
done < <(tail -0f ${logfile})
No subshell, no problem.
Caveat about that syntax: There must be a space between the two < operators; otherwise it looks like a HEREIS document with bad syntax.
Er, one more catch: The syntax did not work in ksh, not even in the mksh (under cygwin) which emulates ksh93. But it did work in bash. So my boss is gonna have a good laugh at me, 'cause he knows I dislike bash.
So thanks MUCH, dogbane.
-- J
After articulating the problem and sleeping on it, the reason for the described behavior came to me: After setting go=0, the control flow of the loop still depends on another line of data coming in from STDIN via that pipe.
And now that I have realized the cause of the weirdness, I can speculate on an alternative way of reading from the stream. For the moment I am thinking of the following solution:
Open the input file as STDIN (Need to research the exec syntax for that)
When the condition occurs, close STDIN (Again, need to research the syntax for that)
It should then be safe to use the more intuitive:while read lbuffat the top of the loop.
I'll test this out today and post the result. I'd hope someone else benefit from the method (if it works).
It's the first great virtue of programmers. All of us have, at one time or another automated a task with a bit of throw-away code. Sometimes it takes a couple seconds tapping out a one-liner, sometimes we spend an exorbitant amount of time automating away a two-second task and then never use it again.
What tiny hack have you found useful enough to reuse? To make go so far as to make an alias for?
Note: before answering, please check to make sure it's not already on favourite command-line tricks using BASH or perl/ruby one-liner questions.
i found this on dotfiles.org just today. it's very simple, but clever. i felt stupid for not having thought of it myself.
###
### Handy Extract Program
###
extract () {
if [ -f $1 ] ; then
case $1 in
*.tar.bz2) tar xvjf $1 ;;
*.tar.gz) tar xvzf $1 ;;
*.bz2) bunzip2 $1 ;;
*.rar) unrar x $1 ;;
*.gz) gunzip $1 ;;
*.tar) tar xvf $1 ;;
*.tbz2) tar xvjf $1 ;;
*.tgz) tar xvzf $1 ;;
*.zip) unzip $1 ;;
*.Z) uncompress $1 ;;
*.7z) 7z x $1 ;;
*) echo "'$1' cannot be extracted via >extract<" ;;
esac
else
echo "'$1' is not a valid file"
fi
}
Here's a filter that puts commas in the middle of any large numbers in standard input.
$ cat ~/bin/comma
#!/usr/bin/perl -p
s/(\d{4,})/commify($1)/ge;
sub commify {
local $_ = shift;
1 while s/^([ -+]?\d+)(\d{3})/$1,$2/;
return $_;
}
I usually wind up using it for long output lists of big numbers, and I tire of counting decimal places. Now instead of seeing
-rw-r--r-- 1 alester alester 2244487404 Oct 6 15:38 listdetail.sql
I can run that as ls -l | comma and see
-rw-r--r-- 1 alester alester 2,244,487,404 Oct 6 15:38 listdetail.sql
This script saved my career!
Quite a few years ago, i was working remotely on a client database. I updated a shipment to change its status. But I forgot the where clause.
I'll never forget the feeling in the pit of my stomach when I saw (6834 rows affected). I basically spent the entire night going through event logs and figuring out the proper status on all those shipments. Crap!
So I wrote a script (originally in awk) that would start a transaction for any updates, and check the rows affected before committing. This prevented any surprises.
So now I never do updates from command line without going through a script like this. Here it is (now in Python):
import sys
import subprocess as sp
pgm = "isql"
if len(sys.argv) == 1:
print "Usage: \nsql sql-string [rows-affected]"
sys.exit()
sql_str = sys.argv[1].upper()
max_rows_affected = 3
if len(sys.argv) > 2:
max_rows_affected = int(sys.argv[2])
if sql_str.startswith("UPDATE"):
sql_str = "BEGIN TRANSACTION\\n" + sql_str
p1 = sp.Popen([pgm, sql_str],stdout=sp.PIPE,
shell=True)
(stdout, stderr) = p1.communicate()
print stdout
# example -> (33 rows affected)
affected = stdout.splitlines()[-1]
affected = affected.split()[0].lstrip('(')
num_affected = int(affected)
if num_affected > max_rows_affected:
print "WARNING! ", num_affected,"rows were affected, rolling back..."
sql_str = "ROLLBACK TRANSACTION"
ret_code = sp.call([pgm, sql_str], shell=True)
else:
sql_str = "COMMIT TRANSACTION"
ret_code = sp.call([pgm, sql_str], shell=True)
else:
ret_code = sp.call([pgm, sql_str], shell=True)
I use this script under assorted linuxes to check whether a directory copy between machines (or to CD/DVD) worked or whether copying (e.g. ext3 utf8 filenames -> fusebl
k) has mangled special characters in the filenames.
#!/bin/bash
## dsum Do checksums recursively over a directory.
## Typical usage: dsum <directory> > outfile
export LC_ALL=C # Optional - use sort order across different locales
if [ $# != 1 ]; then echo "Usage: ${0/*\//} <directory>" 1>&2; exit; fi
cd $1 1>&2 || exit
#findargs=-follow # Uncomment to follow symbolic links
find . $findargs -type f | sort | xargs -d'\n' cksum
Sorry, don't have the exact code handy, but I coded a regular expression for searching source code in VS.Net that allowed me to search anything not in comments. It came in very useful in a particular project I was working on, where people insisted that commenting out code was good practice, in case you wanted to go back and see what the code used to do.
I have two ruby scripts that I modify regularly to download all of various webcomics. Extremely handy! Note: They require wget, so probably linux. Note2: read these before you try them, they need a little bit of modification for each site.
Date based downloader:
#!/usr/bin/ruby -w
Day = 60 * 60 * 24
Fromat = "hjlsdahjsd/comics/st%Y%m%d.gif"
t = Time.local(2005, 2, 5)
MWF = [1,3,5]
until t == Time.local(2007, 7, 9)
if MWF.include? t.wday
`wget #{t.strftime(Fromat)}`
sleep 3
end
t += Day
end
Or you can use the number based one:
#!/usr/bin/ruby -w
Fromat = "http://fdsafdsa/comics/%08d.gif"
1.upto(986) do |i|
`wget #{sprintf(Fromat, i)}`
sleep 1
end
Instead of having to repeatedly open files in SQL Query Analyser and run them, I found the syntax needed to make a batch file, and could then run 100 at once. Oh the sweet sweet joy! I've used this ever since.
isqlw -S servername -d dbname -E -i F:\blah\whatever.sql -o F:\results.txt
This goes back to my COBOL days but I had two generic COBOL programs, one batch and one online (mainframe folks will know what these are). They were shells of a program that could take any set of parameters and/or files and be run, batch or executed in an IMS test region. I had them set up so that depending on the parameters I could access files, databases(DB2 or IMS DB) and or just manipulate working storage or whatever.
It was great because I could test that date function without guessing or test why there was truncation or why there was a database ABEND. The programs grew in size as time went on to include all sorts of tests and become a staple of the development group. Everyone knew where the code resided and included them in their unit testing as well. Those programs got so large (most of the code were commented out tests) and it was all contributed by people through the years. They saved so much time and settled so many disagreements!
I coded a Perl script to map dependencies, without going into an endless loop, For a legacy C program I inherited .... that also had a diamond dependency problem.
I wrote small program that e-mailed me when I received e-mails from friends, on an rarely used e-mail account.
I wrote another small program that sent me text messages if my home IP changes.
To name a few.
Years ago I built a suite of applications on a custom web application platform in PERL.
One cool feature was to convert SQL query strings into human readable sentences that described what the results were.
The code was relatively short but the end effect was nice.
I've got a little app that you run and it dumps a GUID into the clipboard. You can run it /noui or not. With UI, its a single button that drops a new GUID every time you click it. Without it drops a new one and then exits.
I mostly use it from within VS. I have it as an external app and mapped to a shortcut. I'm writing an app that relies heavily on xaml and guids, so I always find I need to paste a new guid into xaml...
Any time I write a clever list comprehension or use of map/reduce in python. There was one like this:
if reduce(lambda x, c: locks[x] and c, locknames, True):
print "Sub-threads terminated!"
The reason I remember that is that I came up with it myself, then saw the exact same code on somebody else's website. Now-adays it'd probably be done like:
if all(map(lambda z: locks[z], locknames)):
print "ya trik"
I've got 20 or 30 of these things lying around because once I coded up the framework for my standard console app in windows I can pretty much drop in any logic I want, so I got a lot of these little things that solve specific problems.
I guess the ones I'm using a lot right now is a console app that takes stdin and colorizes the output based on xml profiles that match regular expressions to colors. I use it for watching my log files from builds. The other one is a command line launcher so I don't pollute my PATH env var and it would exceed the limit on some systems anyway, namely win2k.
I'm constantly connecting to various linux servers from my own desktop throughout my workday, so I created a few aliases that will launch an xterm on those machines and set the title, background color, and other tweaks:
alias x="xterm" # local
alias xd="ssh -Xf me#development_host xterm -bg aliceblue -ls -sb -bc -geometry 100x30 -title Development"
alias xp="ssh -Xf me#production_host xterm -bg thistle1 ..."
I have a bunch of servers I frequently connect to, as well, but they're all on my local network. This Ruby script prints out the command to create aliases for any machine with ssh open:
#!/usr/bin/env ruby
require 'rubygems'
require 'dnssd'
handle = DNSSD.browse('_ssh._tcp') do |reply|
print "alias #{reply.name}='ssh #{reply.name}.#{reply.domain}';"
end
sleep 1
handle.stop
Use it like this in your .bash_profile:
eval `ruby ~/.alias_shares`