I am building a small vba script that is merging tables from several workbook into one single worksheet of another workbook. The error is raised when I try to set the destination range's value:
wksPivotData.Range(wksPivotData.Cells(CurrentRow, 1)).Resize(tbl.ListRows.Count, tbl.ListColumns.Count).Value = _
tbl.Range.Value
The error: "Run-time error '1004': Application-Defined or object-defined error"
I went through similar questions, and the general answer is what I found in this one: The selected cell belongs to another worksheet than the one desired.
While this makes complete sense, I still can't figure why my code breaks as I'm only using numerical reference (CurrentRow is a Long) and Resize, which should prevent me from doing such a mistake.
Additionally, I ran a couple quick tests in the Immediate window and it turns out that while the worksheet wksPivotData exists and I can access its name and a cell value, the range function simply doesn't work:
Debug.Print wksPivotData.Name
PivotData
Debug.Print wksPivotData.Cells(1, 1).Value
123
Both of those work but the next one doesn't:
Debug.Print wksPivotData.Range(1, 1).Value
Your last line, Debug.Print wksPivotData.Range(1, 1).Value won't print because you're misuing Range(). I assume you want A1?
When using Range(1,1), you're referring to a non-existent range. If you want to do cell A1, you need
With wksPivotData
myData = .Range(.Cells(1,1),.Cells(1,1)).Value
End with
Since you're using multiple worksheets, I'd use the with statement as above. Another way to write the same thing is wksPivotData.Range(wksPivotData.Cells(1,1),wksPivotData.Cells(1,1)) (You need to explicitly tell Excel what sheet you want to refer to when using Range() and cells().
Finally, for your resize, if I recall correctly, you're going to have to add the same Cell() twice in your range:
wksPivotData.Range(wksPivotData.Cells(CurrentRow, 1),ksPivotData.Cells(CurrentRow, 1)).Resize(tbl.ListRows.Count, tbl.ListColumns.Count).Value = _
tbl.Range.Value
Or, for the same thing, but different way of doing it:
With wksPivotData
.Range(.Cells(currentRow, 1), .Cells(currentRow, 1)).Resize(tbl.ListedRows.Count, tbl.ListColumns.Count).Value = tbl.Range.Value
End With
Related
The Problem
Assume that the active cell contains a formula based on the INDEX function:
=INDEX(myrange, x,y)
I would like to build a macro that locates the value found value by INDEX and moves the focus there, that is a macro changing the active cell to:
Range("myrange").Cells(x,y)
Doing the job without macros (slow but it works)
Apart from trivially moving the selection to myrange and manually counting x rows y and columns, one can:
Copy and paste the formula in another cell as follows:
=CELL("address", INDEX(myrange, x,y))
(that shows the address of the cell matched by INDEX).
Copy the result of the formula above.
Hit F5, Ctrl-V, Enter (paste the copied address in the GoTo dialog).
You are now located on the very cell found by the INDEX function.
Now the challenge is to automate these steps (or similar ones) with a macro.
Tentative macros (not working)
Tentative 1
WorksheetFunction.CELL("address", ActiveCell.Formula)
It doesn't work since CELL for some reason is not part of the members of WorksheetFunction.
Tentative 2
This method involves parsing the INDEX-formula.
Sub GoToIndex()
Dim form As String, rng As String, row As String, col As String
form = ActiveCell.Formula
form = Split(form, "(")(1)
rng = Split(form, ",")(0)
row = Split(form, ",")(1)
col = Split(Split(form, ",")(2), ")")(0)
Range(rng).Cells(row, CInt(col)).Select
End Sub
This method actually works, but only for a simple case, where the main INDEX-formula has no nested subformulas.
Note
Obviously in a real case myrange, x and ycan be both simple values, such as =INDEX(A1:D10, 1,1), or values returned from complex expressions. Typically x, y are the results of a MATCH function.
EDIT
It was discovered that some solutions do not work when myrange is located on a sheet different from that hosting =INDEX(myrange ...).
They are common practice in financial reporting, where some sheets have the main statements whose entries are recalled from others via an INDEX+MATCH formula.
Unfortunately it is just when the found value is located on a "far" report out of sight that you need more the jump-to-the-cell function.
The task could be done in one line much simpler than any other method:
Sub GoToIndex()
Application.Evaluate(ActiveCell.Formula).Select
End Sub
Application.Evaluate(ActiveCell.Formula) returns a range object from which the CELL function gets properties when called from sheets.
EDIT
For navigating from another sheet you should first activate the target sheet:
Option Explicit
Sub GoToIndex()
Dim r As Range
Set r = Application.Evaluate(ActiveCell.Formula)
r.Worksheet.Activate
r.Select
End Sub
Add error handling for a general case:
Option Explicit
Sub GoToIndex()
Dim r As Range
On Error Resume Next ' errors off
Set r = Application.Evaluate(ActiveCell.Formula) ' will work only if the result is a range
On Error GoTo 0 ' errors on
If Not (r Is Nothing) Then
r.Worksheet.Activate
r.Select
End If
End Sub
There are several approaches to select the cell that a formula refers to...
Assume the active cell contains: =INDEX(myrange,x,y).
From the Worksheet, you could try any of these:
Copy the formula from the formula bar and paste into the name box (to the left of the formula bar)
Define the formula as a name, say A. Then type A into the Goto box or (name box)
Insert hyperlink > Existing File or Web page > Address: #INDEX(myrange,x,y)
Adapt the formula to make it a hyperlink: =HYPERLINK("#INDEX(myrange,x,y)")
Or from the VBA editor, either of these should do the trick:
Application.Goto Activecell.FormulaR1C1
Range(Activecell.Formula).Select
Additional Note:
If the cell contains a formula that refers to relative references such as =INDEX(A:A,ROW(),1) the last of these would need some tweaking. (Also see: Excel Evaluate formula error). To allow for this you could try:
Range(Evaluate("cell(""address""," & Mid(ActiveCell.Formula, 2) & ")")).Select
This problem doesn't seem to occur with R1C1 references used in Application.Goto or:
ThisWorkbook.FollowHyperlink "#" & mid(ActiveCell.FormulaR1C1,2)
You could use the MATCH() worksheet function or the VBA FIND() method.
EDIT#1
As you correctly pointed out, INDEX will return a value that may appear many times within the range, but INDEX will always return a value from some fixed spot, say
=INDEX(A1:K100,3,7)
will always give the value in cell G3 so the address is "builtin" to the formula
If, however, we have something like:
=INDEX(A1:K100,Z100,Z101)
Then we would require a macro to parse the formula and evaluate the arguments.
Both #lori_m and #V.B. gave brilliant solutions in their own way almost in parallel.
Very difficult for me to choose the closing answer, but V.B. even created Dropbox test file, so...
Here I just steal the best from parts from them.
'Move to cell found by Index()
Sub GoToIndex()
On Error GoTo ErrorHandler
Application.Goto ActiveCell.FormulaR1C1 ' will work only if the result is a range
Exit Sub
ErrorHandler:
MsgBox ("Active cell does not evaluate to a range")
End Sub
I associated this "jump" macro with CTRL-j and it works like a charm.
If you use balance sheet like worksheets (where INDEX-formulas, selecting entries from other sheets, are very common), I really suggest you to try it.
I have an Excel document that copies a template sheet into a new sheet on the first time it runs. Any more sheets that follow this template are appended to the newly created sheet.
I'm getting the error in the title in this section of code:
If Worksheets("User Configuration").Cells(9, 15).Value = 1 Then
Worksheets("Cable Cards Template").Range("A1:J33").Copy
With Worksheets("Cable Cards")
**.Range(Cells(RangeStartRow, RangeStartColumn), Cells(RangeEndRow, RangeEndColumn)).PasteSpecial xlValues**
.Range(Cells(RangeStartRow, RangeStartColumn), Cells(RangeEndRow, RangeEndColumn)).PasteSpecial xlFormats
End With
Worksheets("Cable Cards Template").Shapes("Picture 1").Copy
Worksheets("Cable Cards").Paste Cells(RangeStartRow, RangeStartColumn)
Call Sheets.FormatCableCardRows
End If
Basically if the If statement is true (the cell = 1), then a range on a particular sheet should be copied and pasted into the new sheet at the range given using PasteSpecial for values and formatting. Following that, the "newly created" sheet should have an image copied into the top left cell of the template and then a subroutine is called to format the rows of the new sheet.
I'm getting the error at the first .Range call after the With Worksheets("Cable Cards") statement. I've tried not using the With statement, copying values directly instead of paste-special etc. The weird thing is that this will run on the first go, when the new sheet is created via:
If (RangeStartRow = 1) Then
Worksheets.Add().Name = "Cable Cards" ' Create new sheet with given name only on first cable card
Columns(1).ColumnWidth = 9.43
Columns(6).ColumnWidth = 11
Columns(10).ColumnWidth = 9
Call FormatForA5Printing("Cable Cards", 71)
End If
but on the 2nd go, it fails entirely, with the Run Time Error 1004 'Application Defined or Object Defined Error'. I'd appreciate any help.
Your cells object is not fully qualified. You need to add a DOT before the cells object. For example
With Worksheets("Cable Cards")
.Range(.Cells(RangeStartRow, RangeStartColumn), _
.Cells(RangeEndRow, RangeEndColumn)).PasteSpecial xlValues
Similarly, fully qualify all your Cells object.
Solution #1:
Your statement
.Range(Cells(RangeStartRow, RangeStartColumn), Cells(RangeEndRow, RangeEndColumn)).PasteSpecial xlValues
does not refer to a proper Range to act upon. Instead,
.Range(.Cells(RangeStartRow, RangeStartColumn), .Cells(RangeEndRow, RangeEndColumn)).PasteSpecial xlValues
does (and similarly in some other cases).
Solution #2:
Activate Worksheets("Cable Cards") prior to using its cells.
Explanation:
Cells(RangeStartRow, RangeStartColumn) (e.g.) gives you a Range, that would be ok, and that is why you often see Cells used in this way. But since it is not applied to a specific object, it applies to the ActiveSheet. Thus, your code attempts using .Range(rng1, rng2), where .Range is a method of one Worksheet object and rng1 and rng2 are in a different Worksheet.
There are two checks that you can do to make this quite evident:
Activate your Worksheets("Cable Cards") prior to executing your Sub and it will start working (now you have well-formed references to Ranges). For the code you posted, adding .Activate right after With... would indeed be a solution, although you might have a similar problem somewhere else in your code when referring to a Range in another Worksheet.
With a sheet other than Worksheets("Cable Cards") active, set a breakpoint at the line throwing the error, start your Sub, and when execution breaks, write at the immediate window
Debug.Print Cells(RangeStartRow, RangeStartColumn).Address(external:=True)
Debug.Print .Cells(RangeStartRow, RangeStartColumn).Address(external:=True)
and see the different outcomes.
Conclusion:
Using Cells or Range without a specified object (e.g., Worksheet, or Range) might be dangerous, especially when working with more than one Sheet, unless one is quite sure about what Sheet is active.
Assgining a value that starts with a "=" will kick in formula evaluation and gave in my case the above mentioned error #1004. Prepending it with a space was the ticket for me.
To clarify. I have 1 spreadsheet I am creating the VBA in. When the Macro runs, I want the code to find a specific value in a separate WorkBook sheet and return the location of the value in the other WorkBook.
My initial thought was to use HLookUp, however that will only return the value, not the location of the value. My next thought was to use the Find function, but I can't get it to run. The error I get is: Run-time error "438': Object doesn't support this property or method
startValue = enrollBook.Sheets("Pop-FY").Range("D:Z"). _
Applications.WorksheetFunction. _
Find(What:=FYString, LookIn:=xlValues)
enrollBook is the other workbook.
startValue is supposed to be the location of the found value in the other spreadsheet
This is a weird way of calling a function & formatting you've got there, I first even thought that code was invalid.
First, you are confusing Range.Find with Application.WorksheetFunction.Find. You need the Range one, but are calling the other one.
Second, the error is because it's Application, not Applications.
Third, you will need a Set:
Set startValue = enrollBook.Sheets("Pop-FY").Range("D:Z").Find(What:=FYString, LookIn:=xlValues)
You mean something like this?
Dim sTest As String
Dim oRange As Range
Set oRange = Worksheets(1).Range("A1:Z10000").Find("Test", lookat:=xlPart)
MsgBox oRange.Address
I tested this, but you need to change your parameters.
I have done a small project, which consists of 5 excel sheet in, code is working fine and I am getting exact result also, but if I rename sheets from sheet1 to some other name I am getting Subscript out of range Error.
What is the reason for this and what needs to be done to overcome this. Please help.
Below is the code
Public Sub amount_final()
Dim Row1Crnt As Long
Dim Row2Crnt As Long
With Sheets("sheet4")
Row1Last = .Cells(Rows.Count, "B").End(xlUp).Row
End With
Row1Crnt = 2
With Sheets("sheet3")
Row2Last = .Cells(Rows.Count, "B").End(xlUp).Row
End With
There is nothing wrong with the code per se. You will get Subscript out of range error if Excel is not able to find a particular sheet which is quite obvious since you renamed it. For example, if you rename your sheet "Sheet3" to "SheetXYZ" then Excel will not be able to find it.
The only way to avoid these kind of errors is to use CODENAME of the sheets. See Snapshot
Here we have a sheet which has a name "Sample Name before Renaming"
So consider this code
Sheets("Sample Name before Renaming").Range("A1").Value = "Blah Blah"
The same code can be written as
Sheet2.Range("A1").Value = "Blah Blah"
Now no matter how many times you rename the sheet, the above code will always work :)
HTH
Sid
The basic issue is that you are referring to sheets using their common names and not their codenames. Whenever you refer to Sheets("sheet4"), you are relying on the sheet having that name in Excel. Codenames are the names assigned in Visual Basic so the end user does not interact with them/as a developer you can change the Excel names any time you like
Using code names is covered at around 9:40 in this Excel help video. You'll note they are quicker to type than the Excel names as do not require the 'Sheets()' qualifier
I couldn't see Sheets("Sheet1") in your code sample but you can switch to codenames for all sheets very quickly by finding/replacing all examples of e.g. 'Sheets("Sheet2").' with 'Sheet2.'
Refer to each sheet by their code names instead. They are set to Sheet1, Sheet2 etc as default, but you can rename them in the Properties window for each sheet if you want. This way you can write your code like below instead, regardless of what you name the sheets.
With Sheet1
Row1Last = .Cells(Rows.Count, "B").End(xlUp).Row
End With
Row1Crnt = 2
With Sheet2
Row2Last = .Cells(Rows.Count, "B").End(xlUp).Row
End With
etc...
I wanted to share my experience battling this problem. Here is the mistake I committed:
Dim DailyWSNameNew As String
lastrow = Sheets("DailyWSNameNew").Range("A65536").End(xlUp).Row + 1 -- This is wrong as I included a placeholder worksheet name in quotes
Correction:
lastrow = Sheets(DailyWSNameNew).Range("A65536").End(xlUp).Row + 1
This solved it.
I encountered this error earlier today but could not use any solution above, I did however eventually managed to solve it myself.
My situation was that I had a list contained in column A. For each cell with a value I stored the value in a variable, created a new sheet and named the sheet according to the value stored in the variable.
A bit later in the code I tried to select the newly created sheet by using the code:
Sheets(ValueVariable).Select
I encountered the "Subscript out of range" error and I couldn't figure out why. I've used similar code before with success.
I did however solve it by casting the variable as a string. Declaring the variable as a string did not seem to work for me.
So, if anyone else encounter this error and want something to try, perhaps this will work for you:
Sheets(Cstr(ValueVariable)).Select
I want to have/define a unique id for each data row in my Excel data sheet - such that I can use it when passing the data onwards and it stays the same when rows are added/deleted above it.
My thoughts are to use the ID attribute of Range (msdn link)
So, I have a user defined function (UDF) which I place in each row that gets/sets the ID as follows:
Dim gNextUniqueId As Integer
Public Function rbGetId(ticker As String)
On Error GoTo rbGetId_Error
Dim currCell As Range
'tried using Application.Caller direct, but gives same error
Set currCell = Range(Application.Caller.Address)
If currCell.id = "" Then
gNextUniqueId = gNextUniqueId + 1
'this line fails no matter what value I set it to.
currCell.id = Str(gNextUniqueId)
End If
rbGetId = ticker & currCell.id
Exit Function
rbGetId_Error:
rbGetId = "!ERROR:" & Err.Description
End Function
But this fails at the line mentioned with
"Application-defined or object-defined error"
I thought perhaps its one of those limitations of UDFs, but I also get the same error if I try it from code triggered from a ribbon button...
Any other suggestions on how to keep consistent ids - perhaps I should populate the cells via my ribbon button, finding cells without IDs and generating/setting the cell value of those...
EDIT:
As Ant thought, I have the sheet protected, but even in an unlocked cell it still fails. Unprotecting the sheet fixes the problem.... but I have used "Protect UserInterFaceOnly:=True" which should allow me to do this. If I manually allow "Edit Objects" when I protect the sheet it also works, but I don't see a programmatic option for that - and I need to call the Protect function in AutoOpen to enable the UserInterfaceOnly feature...
I guess I need to turn off/on protect around my ID setting - assuming that can be done in a UDF... which it seems it cannot, as that does not work - neither ActiveSheet.unprotect nor ActiveWorkbook.unprotect :(
Thanks in advance.
Chris
Okay...
It does appear that if the sheet is locked, macros do not have write access to low-level information such as ID.
However, I do not think it is possible to unprotect the sheet within a UDF. By design, UDFs are heavily restricted; I think having a cell formula control the sheet protection would break the formula paradigm that a cell formula affects a cell only.
See this page on the Microsoft website for more details.
I think this limits your options. You must either:
give up sheet protection
give up the UDF, use a Worksheet_Change event to capture cell changes and write to ID there
use a UDF that writes the ID into the cell value, rather than save to ID
The UDF approach is fraught with problems as you are trying to use something designed for calculation of a cell to make a permanent mark on the sheet.
Nonetheless, here's an example of a UDF you can use to stamp a "permanent" value onto a cell, which works on unlocked cells of a protected sheet. This one only works for single cells (although it could be adapted for an array formula).
Public Function CellMark()
Dim currCell As Range
Set currCell = Range(Application.Caller.Address)
Dim myId As String
' must be text; using .value will cause the formula to be called again
' and create a circular reference
myId = currCell.Text
If (Trim(myId) = "" Or Trim(myId) = "0") Then
myId = "ID-" & Format(CStr(gNextUniqueId), "00000")
gNextUniqueId = gNextUniqueId + 1
End If
CellMark = myId
End Function
This is quite flawed though. Using copy or the fillbox will, however, retain the previous copied value. Only by explicitly setting cells to be a new formula will it work. But if you enter in the formula into the cell again (just click it, hit ENTER) a new value is calculated - which is standard cell behaviour.
I think the Worksheet_Change event is the way to go, which has much more latitude. Here's a simple example that updates the ID of any cell changes. It could be tailored to your particular scenario. This function would need to be added to every Worksheet the ID setting behaviour is required on.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim currCell As Range
Set currCell = Target.Cells(1, 1)
Dim currId As String
currId = currCell.ID
If Trim(currCell.ID) = "" Then
Target.Parent.Unprotect
currCell.ID = CStr(gNextUniqueId)
Target.Parent.Protect
gNextUniqueId = gNextUniqueId + 1
End If
End Sub
Last note; in all cases, your ID counter will be reset if you re-open the worksheet (at least under the limited details presented in your example).
Hope this helps.
Concur with Ant - your code works fine here on Excel 2003 SP3.
I've also been able to use:
Set currCell = Application.Caller
If Application.Caller.ID = "" Then
gNextUniqueId = gNextUniqueId + 1
'this line fails no matter what value I set it to.
currCell.ID = Str(gNextUniqueId)
End If
Aha! I think I have it.
I think you're calling this from an array formula, and it only gets called ONCE with the full range. You can't obtain an ID for a range - only a single cell. This explains why Application.Caller.ID fails for you, because Range("A1:B9").ID generates an Application-defined or object-defined error.
When you use Range(Application.Caller.Address) to get the "cell" you just defer this error down to the currCell.ID line.
I think we may have a few issues going on here, but I think they are testing issues, not problems with the code itself. First, if you call the function from anything other than a Cell, like the immediate window, other code, etc. Application.Caller will not be set. This is what is generating your object not found errors. Second, if you copy/paste the cell that has the function, they you will by copy/pasting the ID too. So wherever you paste it to, the output will stay the same. But if you just copy the text (instead of the cell), and then paste then this will work fine. (Including your original use of Application.Caller.)
The problem is with Application.Caller.
Since you are calling it from a user defined function it is going to pass you an error description. Here is the remark in the Help file.
Remarks
This property returns information about how Visual Basic was called, as shown in the following table.
Caller - Return value
A custom function entered in a single cell - A Range object specifying that cell
A custom function that is part of an array formula in a range of cells - A Range object specifying that range of cells
An Auto_Open, Auto_Close, Auto_Activate, or Auto_Deactivate macro - The name of the document as text
A macro set by either the OnDoubleClick or OnEntry property - The name of the chart object identifier or cell reference (if applicable) to which the macro applies
The Macro dialog box (Tools menu), or any caller not described above - The #REF! error value
Since you are calling it from a user defined function, what is happening is Application.Caller is returning a String of an error code to your range variable curCell. It is NOT causing an error which your error handler would pick up. What happens after that is you reference curCell, it's not actually a range anymore. On my machine it tries setting curCell = Range("Error 2023"). Whatever that object is, it might not have an ID attribute anymore and when you try to set it, it's throwing you that object error.
Here's what I would try...
Try removing your error handler and see if VBA throws up any exceptions on Range(Application.Caller.Address). This won't fix it, but it could point you in the right direction.
Either through logic or Application.ActiveCell or however you want to do it, reference the cell directly. For example Range("A1") or Cells(1,1). Application.Caller.Address just doesn't seem like a good option to use.
Try using Option Explicit. This might make the line where you set curCell throw up an error since Range(Application.Caller.Address) doesn't look like it's passing a range back, which is curCell's datatype.
I have found that if I protect the sheet with "Protect DrawingObjects:=False", the UDF can set the Id. Strange.
Thanks for all the help with this.