I am using VB.NET VS2010. I have a toolstrip with a ToolStripDropDownButton.
The dropdown items are created at runtime and all works fine.
The problem is that when there are too many items the small overflow buttons appear which are unusable in touch screen tablets.
I set the LayoutStyle to Flow but cannot get the items to flow.
I have now set the dropdown of the button to a ContextMenuStrip so that I could perhaps customise it better but no matter what I try the LayoutStyle of the ContextMenuStrip stays the same.
How can I get it to flow properly the way the main toolstripitems flow?
Related
i was wondering if it was possible to hide everything at once in windows forms, i was planning to use a drop down which made things appear and disappear but i wanted everything hidden at the beginning for simplicity.
Thanks!
On the form, add a Panel control (found in the Containers section of the toolbox).
Set the Visible value of the Panel to be False.
Add all controls inside this panel. You can then make the panel visible and hidden via code. (no need to cycle through all controls on the form)
I am working with a Visual Basic.NET project in Visual Studio 2017 (.NET Framework 4.6.1)
I am using a Listbox which is associated with a BindingSource.
The Listbox is contained within one pane of a SplitterControl.
I also have a TabControl is located within the other pane of the SplitterControl. This control contains child data associated with the items in the ListBox and is refreshed when the ListBox is clicked and an item is subsequently selected in the ListBox. The Click event refreshes a Treeview, which then populates the TabControl with data if/when (1) a tree node is clicked and (2) appropriate data is retrieved for that node.
The Listbox Click event works fine while clicking different items consecutively within the Listbox only.
However, once the mouse clicks in the TabControl (in the other pane of the SplitterControl), then once the initial Listbox is clicked, the Click event doesn’t fire.
I have researched this issue (on StackOverFlow as well as other forums) and suggestions have basically revolved around the idea that the Click event could be forced by calling the routine set up as the Click event handler (e.g., myListBox_Click).
I have tried this, but the problem is that I am losing the current SelectedIndex / SelectedValue.
To illustrate by reproducing the issue within the app where I am encountering the problem:
The app in question (note the Listbox highlighted by the red arrow - Screenshot 1):
Screenshot 1
Upon startup of the app, the Listbox behaves as it should, if the user clicks nowhere else, only selecting various items within the Listbox. The TabControl (initial tab shown is always the Profile tab) is refreshed accordingly.
However, if at any point, the mouse is clicked in the TabControl (e.g., to select another tab, note Screenshot 2)
Screenshot 2
Now, when the user clicks on another item in the Listbox, the wrong item is selected (shown in Screenshot 3):
Screenshot 3
The Click event is now being forced via a call to MyListBox_Click within the TabControl_Leave event; my thinking was that this was the appropriate place to put the subroutine call. My reasoning was that when the Listbox was clicked in this scenario, the first event to fire (as far as I could tell) was the TabControl_Leave event.
Not surprisingly, if the same item in the Listbox (in this example scenario, Allegheny) is subsequently clicked, than the result is what should have happened on the previous click (that the SelectedValue is correct, as seen in Screenshot 4):
Screenshot 4
Of course, this is correct, since the last click occurred while the Listbox was already the active control.
I have tried several approaches such as (1) using a global variable to store the current index/value and retrieving it, and (2) using the Tag property of the TabControl to store and retrieve the same value. This has either worked inconsistently or not at all because of the order in which the control events fire.
Hopefully, I've been clear enough on the nature of my problem/issue.
Anyone have any ideas on what my next approach could be? Any ideas/insights/suggestions will, of course, be greatly appreciated.
Thanks in advance,
Chris Fleetwood
Software Developer
North Carolina Partnership for Children (SmartStart)
I've taken over a project, which contains some UltraWinGrid controls on some of the forms.
On one of the original forms which has been there since before I took on the project, there is a ContextMenuStrip, which has just one ContextMenuToolstripItem on it, captioned 'Default for Column'.
This ContextMenuStrip is hidden by default, however, when the user right-clicks on the UltraGrid, the ContextMenuStripItem is displayed on the grid (rather than at the top of them form where the ContextMenuStrip is).
I'm trying to replicate this behaviour in a new form that I've added myself, however, after adding the ContextMenuToolstripItem in, I cannot get it to display when right-clicking my grid.
I've put a breakpoint on every subroutine in the in the older forms class, and none of them are triggered when right-clicking it.
Additionally I have also searched the class for DefaultForColumnToolstripMenuItem, and the only place it appears is in the Click event of the ContextMenuToolStripItem itself.
So, how else is it possible to show it when right-clicking the grid? I've copy and pasted the ContextMenuStrip from the old form onto the new form and still nothing occurred.
I'm assuming it's in a property somewhere that I'm missing?
Check for a ContextMenuStrip property on the UltraWinGrid. You can set it in the designer and your context menu will appear on right click without having to deal with the MouseClick handler, checking the mousebutton used, etc.
I've got two forms, one being frmMain and the other being frmDatasets. The idea is that frmDatasets is used to manage the application's datasets (it's a program for comparing sorting algorithms).
I have a MenuStrip on frmDatasets with a few items. I just decided to change the Add Dataset item to a drop-down menu with options for loading one from file, or generating one according to certain parameters. All well and good; just add the items, swap some icons around, and change the event handler's signature to handle the right Click event.
Except when I run the program, clicking on the Add Datasets top-level item for the first time sends frmDatasets to the back, displaying an inactive frmMain. Clicking the item again shows the dropdown menu as usual.
If I instead click another top-level menu item, that works just fine. But then simply hovering my mouse over the Add Dataset item causes the 'send to back' thing to happen.
I say "send to back", but it's really just putting it behind frmMain. It remains in front of other windows like Visual Studio and Firefox.
Anyone know what on Earth is going on with this form?
EDIT: If I show frmDatasets as a modal dialog, it stops the whole "sending to back" thing, but I still have to click the menu item twice before it shows the list.
EDIT2: Overriding the onClick event to call mnuAddDatasetDropDown.ShowDropDown removes the double-click issue, but it's only a solution if I keep the form as a modal dialog. Still gets sent to back. Overriding mouseEnter doesn't do anything to solve it.
Setting the TopMost property of frmDatasets from its Design view to 'true' fixed all of the problems I was having. No insight as to what was going on, unfortunately, but if anyone else is having this problem then hopefully it'll work for them too.
I have a windows application with a tabcontrol. One of the tab of the tabcontrol has a webbrowser control.Now the issue that I am facing is when the focus is inside the webbrowser control, the normal Ctrl+Tab functionality of the tabcontrol is not working.I want the Ctrl+Tab to change the selected tab of tabcontrol even when the focus is inside webbrowser control in selected tab.How to achieve this ?
I have already tries overriding ProcessCmdKey.but it does not get hit when focus is inside webbrowser control.
I also tried registerhotkey method ,it works but it locks the Ctrl+Tab hotkey within my application & system doesn't respond to any other Ctrl+Tab presses outside my application when application is running, which is expected behaviour of registerhotkey.
Here is the code you need:
If WB.ContainsFocus Then
MsgBox("We have focus, disappearing...")
WB.Document.Body.RemoveFocus()
End If
Now, the question is, when to run that code. If you put it in the WebBrowser1_GotFocus event, you'll need to turn it on and off. Turn the code off if the user is interacting with the WB Control, and turn it back on when they are not and when you expect to be experiencing the problem you've mentioned.
Of course, you could add another line to ensure a particular control/tab/panel etc gets focus after you remove focus from the body. Also, here are 3 other SO questions that have answers which may help you, but these will take you in directions different to the direction I've provided, probably due to the fact that the questions are not identical to yours, but are similar enough to be useful (not listed in order of preference).
Prevent WebBrowser control from stealing focus?
Webbrowser steals focus
Focusing WebBrowser control in a C# application
UPDATE:
I just wanted to add, instead of the .Body.RemoveFocus() you could do this:
WB.Document.Body.Parent.RemoveFocus()
Which I prefer, since the .Document object didn't have an explicit .RemoveFocus method on the intellisense I was gettign in VS2012 RC. This is probably referring to the HTML tag (and not the .Document object) and since the html tag is the only parent to the body tag, it makes sense, and there is no "HTML" object directly available in the intellisense under object, since you can get it via other means, so it's just more convenient doing it this way.
Cheers, and let me know if you need more info on anything.