I'm trying to install TFS2013 (en_visual_studio_team_foundation_server_2013_with_update_4_x86_x64) on my machine (windows 8.1 x64)
I had a existing SQL instance installed and tried to use that one during my TFS installation but I kept on getting error messages about TFS not being able to connect to my SQL instance.
I started googling te error message and found guides about how you needed to config the SQL to be put on port 1433, add Firewall Rules,.. I tried literally everything, nothing worked.
So I decided to completely remove my SQL instance and install the SQL SERVER 2012 Express edition that comes with the TFS installer. The SQL installation completes successfully, but when configuring TFS again, the same error popped up.
So I went another step further and removed the SQL Server instance again and downloaded the SQL SERVER 2014 Express edition. Yet, same problem.
I've been looking around the web for the error but can't seem to find anything useful. Note that using a database on the SQL SERVER instance from code or connecting using the SQL Management Studio works like charm!
I started inspecting the full blown error log TFS provided me with and found this:
TF400129: TF400129: Error from readiness check: Verifying SQL
connection [Info #18:58:47.025] +-+-+-+-+-| Verifying SQL connection
|+-+-+-+-+- [Info #18:58:47.025] Starting Node: VSQLCONNECT [Info
#18:58:47.025] NodePath :
VINPUTS/Progress/Conditional/VSQLNOTLOCALDB/VSQLISRUNNING/VSQLCONNECT
> [Error #18:58:47.025] System.OverflowException: Arithmetic operation
resulted in an overflow. at
SNIOpenSyncExWrapper(SNI_CLIENT_CONSUMER_INFO* , SNI_ConnWrapper** )
at SNINativeMethodWrapper.SNIOpenSyncEx(ConsumerInfo consumerInfo,
String constring, IntPtr& pConn, Byte[] spnBuffer, Byte[]
instanceName, Boolean fOverrideCache, Boolean fSync, Int32 timeout,
Boolean fParallel) at
System.Data.SqlClient.SNIHandle..ctor(ConsumerInfo myInfo, String
serverName, Byte[] spnBuffer, Boolean ignoreSniOpenTimeout, Int32
timeout, Byte[]& instanceName, Boolean flushCache, Boolean fSync,
Boolean fParallel) at
System.Data.SqlClient.TdsParserStateObject.CreatePhysicalSNIHandle(String
serverName, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Byte[]&
instanceName, Byte[] spnBuffer, Boolean flushCache, Boolean async,
Boolean fParallel) at
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo,
SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout,
Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean
integratedSecurity, Boolean withFailover)
...
For completeness, this is the error screen I can't pass:
I'm really at a dead end here. Ive been trying to get this fixed for days now and I come here as my last resort. Thanks in advance.
Related
I have set up Continuous Deployment of my aspnet core 2.2 app using Kudu build service (directly connected through GitHub). It was fine until the day before yesterday but started getting UnauthorizedAccessException when I try to deploy anything since yesterday. Nothing changed in my application though. Any idea what could be wrong here??
Here is the detail exception:
Command: "D:\home\site\deployments\tools\deploy.cmd"
Handling ASP.NET Core Web Application deployment.
System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
at Internal.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
at Internal.Win32.RegistryKey.SetValue(String name, String value)
at System.Environment.SetEnvironmentVariableFromRegistry(String variable, String value, Boolean fromMachine)
Failed exitCode=1, command=dotnet restore "D:\home\site\repository\myproject.sln"
at System.Environment.SetEnvironmentVariable(String variable, String value, EnvironmentVariableTarget target)
An error has occurred during web site deployment.
at Microsoft.DotNet.Cli.Utils.EnvironmentProvider.SetEnvironmentVariable(String variable, String value, EnvironmentVariableTarget target)
at Microsoft.DotNet.ShellShim.WindowsEnvironmentPath.AddPackageExecutablePathToUserPath()
at Microsoft.DotNet.Configurer.DotnetFirstTimeUseConfigurer.Configure()
at Microsoft.DotNet.Cli.Program.ConfigureDotNetForFirstTimeUse(IFirstTimeUseNoticeSentinel firstTimeUseNoticeSentinel, IAspNetCertificateSentinel aspNetCertificateSentinel, IFileSentinel toolPathSentinel, Boolean hasSuperUserAccess, DotnetFirstRunConfiguration dotnetFirstRunConfiguration, IEnvironmentProvider environmentProvider)
at Microsoft.DotNet.Cli.Program.ProcessArgs(String[] args, ITelemetry telemetryClient)
at Microsoft.DotNet.Cli.Program.Main(String[] args)
System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.\r\n at Internal.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)\r\n at Internal.Win32.RegistryKey.SetValue(String name, String value)\r\n at System.Environment.SetEnvironmentVariableFromRegistry(String variable, String value, Boolean fromMachine)\r\n at System.Environment.SetEnvironmentVariable(String variable, String value, EnvironmentVariableTarget target)\r\n at Microsoft.DotNet.Cli.Utils.EnvironmentProvider.SetEnvironmentVariable(String variable, String value, EnvironmentVariableTarget target)\r\n at Microsoft.DotNet.ShellShim.WindowsEnvironmentPath.AddPackageExecutablePathToUserPath()\r\n at Microsoft.DotNet.Configurer.DotnetFirstTimeUseConfigurer.Configure()\r\n at Microsoft.DotNet.Cli.Program.ConfigureDotNetForFirstTimeUse(IFirstTimeUseNoticeSentinel firstTimeUseNoticeSentinel, IAspNetCertificateSentinel aspNetCertificateSentinel, IFileSentinel toolPathSentinel, Boolean hasSuperUserAccess, DotnetFirstRunConfiguration dotnetFirstRunConfiguration, IEnvironmentProvider environmentProvider)\r\n at Microsoft.DotNet.Cli.Program.ProcessArgs(String[] args, ITelemetry telemetryClient)\r\n at Microsoft.DotNet.Cli.Program.Main(String[] args)\r\nD:\Program Files (x86)\SiteExtensions\Kudu\86.20224.4450\bin\Scripts\starter.cmd "D:\home\site\deployments\tools\deploy.cmd"
After trying "dotnet restore --help" inside kudu and getting the same error I realized that the error was connected to doing "dotnet restore" inside kudu and not with my application.
After looking at the code related to the error message
https://github.com/dotnet/sdk/blob/5d747e7b4f1450a00eff5844bd76b73588531b2c/src/Cli/dotnet/Program.cs#L152
I realized that I could solve the issue by adding a new application setting with the name DOTNET_ADD_GLOBAL_TOOLS_TO_PATH and the value false
Application setting
After that I could deploy my application using kudu as I did before.
I have a dacpac file that is used from SQL 2005 to SQL 2016 databases. Our developers have been using SQL 2016 for the past few months, so we are now moving to production with it.
When attempting to upgrade a database (no previous dacpackage) using our .dacpac file, it will give this error below
===================================
Method not found: 'Void Microsoft.SqlServer.TransactSql.ScriptDom.AlterTableAlterColumnStatement.set_Encryption(Microsoft.SqlServer.TransactSql.ScriptDom.ColumnEncryptionDefinition)'. (Microsoft.Data.Tools.Schema.Sql)
------------------------------
Program Location:
at Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentPlanGenerator.AlterStatementGenerator.GenerateForSimpleColumn(SqlSimpleColumn oldColumn, SqlSimpleColumn newColumn)
at Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentPlanGenerator.AlterStatementGenerator.GenerateAlterTableForColumn(IModelElement oldElement, IModelElement newElement)
at Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentPlanGenerator.AlterStatementGenerator.GenerateStatement(IModelElement oldElement, IModelElement newElement)
at Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentPlanGenerator.Sql90AlterStatementGenerator.GenerateScriptDom(IModelElement oldElement, IModelElement newElement)
at Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentPlanGenerator.DeploymentScriptDomGenerator.GenerateTableAlter(SqlTable sourceTable, SqlTable targetTable)
at Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentPlanGenerator.DeploymentScriptDomGenerator.GenerateFragment(Int32 operation, IModelElement element)
at Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentPlanGenerator.DeploymentScriptDomGenerator.GenerateSteps(Int32 operation, IModelElement element)
at Microsoft.Data.Tools.Schema.Sql.Deployment.OrderedStepGenerator.Add(DeploymentScriptDomGenerator scriptDom, IModelElement element, Int32 operation)
at Microsoft.Data.Tools.Schema.Sql.Deployment.Analyzers.PlanMediator.BuildDependencyOrderedSteps(Int32 operation, List`1 classOrder, List`1 operationOrder, Dictionary`2 changes, Boolean preserveGraphs, Dictionary`2& relating, Dictionary`2& related)
at Microsoft.Data.Tools.Schema.Sql.Deployment.Analyzers.PlanMediator.BuildOperations()
at Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentPlanGenerator.OnGeneratePlan()
at Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentPlanGenerator.GeneratePlan(List`1 drops)
at Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeployment.BuildPlan()
at Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeployment.Controller.CreatePlan()
at Microsoft.SqlServer.Dac.DacServices.<>c__DisplayClass25.<CreateDeploymentArtifactGenerationOperation>b__23(Object operation, CancellationToken token)
at Microsoft.SqlServer.Dac.Operation.Microsoft.SqlServer.Dac.IOperation.Run(OperationContext context)
at Microsoft.SqlServer.Dac.ReportMessageOperation.Microsoft.SqlServer.Dac.IOperation.Run(OperationContext context)
at Microsoft.SqlServer.Dac.OperationExtension.Execute(IOperation operation, DacLoggingContext loggingContext, CancellationToken cancellationToken)
at Microsoft.SqlServer.Dac.DacServices.GenerateDeployReport(DacPackage package, String targetDatabaseName, DacDeployOptions options, Nullable`1 cancellationToken)
at Microsoft.SqlServer.Management.Dac.DacWizard.ReviewPlanPage.ActionStepCalculator_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
As far as I can tell, we don't have Encryption enabled at all on any of the tables. This is a fresh database. We've even tried recreating it from scratch, but we get the same error once we try to apply the dacpac file.
Does anyone know what I can do to get the server to recognize the set_Encryption method that it seems to be missing? Any suggestions are appreciated.
Edit: I've further determined that it is not a SQL 2016 issue, but rather a SQL Server Management Studio 2016 issue.
I was able to get around this error, by first running the dacpac through SqlPackage.exe. After that- I was able to publish through management studio.
We have seen a noticeable uptick in problems related to RavenDB connections. We're using the IIS server connection method.
I've checked the index errors and I don't see anything listed.
This server is replicated with a MySQL server and there is one error related to replication in the log from today. Could the client stack trace errors actually be coming from the replicated server and not Raven?
EDIT
The client in this case is a single job that runs a few hundred times a day...succeeding many of those times but increasing in failures due to these errors.
Sql Replication failure to replication
Here are the partial stack trace errors from the client log:
[WebException: Unable to connect to the remote server]
System.Net.HttpWebRequest.GetRequestStream(TransportContext& context):367
System.Net.HttpWebRequest.GetRequestStream():3
Raven.Abstractions.Connection.HttpRequestHelper.WriteDataToRequest(HttpWebRequest req, String data, Boolean disableCompression):7
Raven.Client.Connection.ServerClient.DirectBatch(IEnumerable`1 commandDatas, String operationUrl):171
Raven.Client.Connection.ReplicationInformer.TryOperation[T](Func`2 operation, String operationUrl, Boolean avoidThrowing, T& result, Boolean& wasTimeout):35
Raven.Client.Connection.ReplicationInformer.ExecuteWithReplication[T](String method, String primaryUrl, Int32 currentRequest, Int32 currentReadStripingBase, Func`2 operation):169
Raven.Client.Connection.ServerClient.ExecuteWithReplication[T](String method, Func`2 operation):33
Raven.Client.Document.DocumentSession.SaveChanges():65
and
[WebException: Unable to connect to the remote server]
System.Net.HttpWebRequest.GetResponse():570
Raven.Client.Connection.HttpJsonRequest.ReadJsonInternal(Func`1 getResponse):45
Raven.Client.Connection.HttpJsonRequest.ReadResponseJson():206
Raven.Client.Connection.ServerClient.DirectGet(String[] ids, String operationUrl, String[] includes, String transformer, Dictionary`2 queryInputs, Boolean metadataOnly):631
Raven.Client.Connection.ServerClient+<>c__DisplayClass77.<Get>b__76(String u):51
Raven.Client.Connection.ReplicationInformer.TryOperation[T](Func`2 operation, String operationUrl, Boolean avoidThrowing, T& result, Boolean& wasTimeout):35
Raven.Client.Connection.ReplicationInformer.ExecuteWithReplication[T](String method, String primaryUrl, Int32 currentRequest, Int32 currentReadStripingBase, Func`2 operation):169
Raven.Client.Connection.ServerClient.ExecuteWithReplication[T](String method, Func`2 operation):33
Raven.Client.Document.HiLoKeyGenerator.GetDocument(IDatabaseCommands databaseCommands):41
Raven.Client.Document.HiLoKeyGenerator.GetNextRange(IDatabaseCommands databaseCommands):109
Raven.Client.Document.HiLoKeyGenerator.NextId(IDatabaseCommands commands):58
Raven.Client.Document.HiLoKeyGenerator.GenerateDocumentKey(IDatabaseCommands databaseCommands, DocumentConvention convention, Object entity):9
Raven.Client.Document.MultiTypeHiLoKeyGenerator.GenerateDocumentKey(IDatabaseCommands databaseCommands, DocumentConvention conventions, Object entity):174
Raven.Client.Document.DocumentStore+<>c__DisplayClass4.<Initialize>b__2(String dbName, IDatabaseCommands databaseCommands, Object entity):20
Raven.Client.Document.DocumentConvention.GenerateDocumentKey(String dbName, IDatabaseCommands databaseCommands, Object entity):164
Raven.Client.Document.GenerateEntityIdOnTheClient.GenerateDocumentKeyForStorage(Object entity):46
Raven.Client.Document.InMemoryDocumentSessionOperations.StoreInternal(Object entity, Etag etag, String id, Boolean forceConcurrencyCheck):79
Raven.Client.Document.InMemoryDocumentSessionOperations.Store(Object entity):23
The error says the client cannot connect to the the server. Maybe the client is offline. Or the server is. Or a firewall is in the way. Or maybe the server is there but blows up before returning a response to the client. If the issue is intermittent, and users arent complaining, it's probably just a connectivity thing that you can ignore. If users are complaining, you should look in server-side logs.
An error occurred while executing the command definition. See the inner exception for details. bbbbInnerException:aaaa System.ArgumentException: The version of SQL Server in use does not support datatype 'datetime2'.
at System.Data.SqlClient.TdsParser.TdsExecuteRPC(_SqlRPC[] rpcArray, Int32 timeout, Boolean inSchema, SqlNotificationRequest notificationRequest, TdsParserStateObject stateObj, Boolean isCommandProc)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.EntityClient.EntityCommandDefinition.ExecuteStoreCommands(EntityCommand entityCommand, CommandBehavior behavioR
I have a website using Entity Framework. A few months ago I added a new table, and added some columns to existing tables; everything worked fine.
Today I updated the mapping of the EDMX so the new table and the new column can be used, and added WebMethods to my services.asmx file. Since then I cannot run my site because I have that error that I cannot understand. Please explain it to me if you understand, and tell me where is my mistake.
I have not used datetime2 anywhere. There is no such datatype in my new table, nor in the columns that I added to existing tables.
The version of SQL on my PC is SQL2008 R2, on the server i have SQL2008. I do not have the option to upgrade the server to R2.
Have you tried to open your EDMX file with XML Editor and check the value of ProviderManifestToken. It may help to change from ProviderManifestToken=”2008” to ProviderManifestToken=”2005”.
In addition to #Mithrandir answer validate that your database is running in compatibility level set to 100 (SQL 2008).
You don't have to use DATETIME2 in your database to get this error. This error happens usually once you add required (NOT NULL) DATETIME column to existing table and you don't set the value prior to saving the entity to database. In such case .NET will send default value which is 1.1.0001 and this value doesn't fit into DATETIME range. This (or something similar) will be source of your problem.
Open your EDMX in a file editor (or “open with…” in Visual Studio and select XML Editor). At the top you will find the storage model and it has an attribute ProviderManifestToken. This has should have the value 2008. Change that to 2005, recompile and everything works.
NOTE: You'll have to do this every time you update the model from database.
The other solutions worked for me but I needed a more permanent solution that would not be reverted every time the edmx was updated from the database. So I created a "Pre-build event" to modify the ProviderManifestToken automatically.
Link to original answer:
https://stackoverflow.com/a/8764394/810850
The prebuild step looks like this:
$(SolutionDir)Artifacts\SetEdmxVer\SetEdmxSqlVersion $(ProjectDir)MyModel.edmx 2005
The code is here:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Xml;
namespace SetEdmxSqlVersion
{
class Program
{
static void Main(string[] args)
{
if (2 != args.Length)
{
Console.WriteLine("usage: SetEdmxSqlVersion <edmxFile> <sqlVer>");
return;
}
string edmxFilename = args[0];
string ver = args[1];
XmlDocument xmlDoc = new XmlDocument();
xmlDoc.Load(edmxFilename);
XmlNamespaceManager mgr = new XmlNamespaceManager(xmlDoc.NameTable);
mgr.AddNamespace("edmx", "http://schemas.microsoft.com/ado/2008/10/edmx");
mgr.AddNamespace("ssdl", "http://schemas.microsoft.com/ado/2009/02/edm/ssdl");
XmlNode node = xmlDoc.DocumentElement.SelectSingleNode("/edmx:Edmx/edmx:Runtime/edmx:StorageModels/ssdl:Schema", mgr);
if (node == null)
{
Console.WriteLine("Could not find Schema node");
}
else
{
Console.WriteLine("Setting EDMX version to {0} in file {1}", ver, edmxFilename);
node.Attributes["ProviderManifestToken"].Value = ver;
xmlDoc.Save(edmxFilename);
}
}
}
}
Code First workaround.
I got this error while running a linq select query, and changing the EDMX isn't an option for me (Code First has no EDMX), and I didn't want to implement this How to configure ProviderManifestToken for EF Code First for a Linqpad query that wasn't going into production code:
// [dbo].[People].[Birthday] is nullable
DateTime minBirthday = DateTime.Now.AddYears(-18);
var query =
from c in context.People
where c.Birthday > birthday
select c;
var adults = query.ToList();
I fixed it by changing query to null check first:
var query =
from c in context.People
where (c.Birthday.HasValue && (c.Birthday > birthDay) )
select c;
I am using WinHost.com to host my site. The SQL Database/membership system works perfectly on my local computer, but when uploaded to the server it doesn't work. I've followed all steps correctly. And I have contacted support for my service but it's been over 2weeks and no reply.
I keep getting this error when i try to login or register a new user on my membership page on my site.
Server Error in '/' Application.
--------------------------------------------------------------------------------
Could not find stored procedure 'dbo.aspnet_CheckSchemaVersion'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Could not find stored procedure 'dbo.aspnet_CheckSchemaVersion'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Could not find stored procedure 'dbo.aspnet_CheckSchemaVersion'.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +1953274
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4849707
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2392
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +204
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +954
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +162
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +175
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +137
System.Web.Util.SecUtility.CheckSchemaVersion(ProviderBase provider, SqlConnection connection, String[] features, String version, Int32& schemaVersionCheck) +378
System.Web.Security.SqlMembershipProvider.CheckSchemaVersion(SqlConnection connection) +89
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +815
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +78
System.Web.UI.WebControls.Login.AuthenticateUsingMembershipProvider(AuthenticateEventArgs e) +60
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +119
System.Web.UI.WebControls.Login.AttemptLogin() +115
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +101
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +37
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +118
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +166
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1565
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.50727.4200; ASP.NET Version:2.0.50727.4016
Can somebody please tell me why this error has occured (obviously it can't find something...), and how I can fix it?
Thank you all
Bael
Did you run aspnet_regsql.exe against WinHost.com's sql server?
aspnet_regsql.exe -S DBServerName -U DBLogin -P DBPassword -A all -d DBName
If you don't know where to run above command then you can simply run 'aspnet_regsql.exe' executable file.
In order to locate this file open your RUN Command Box by pressing Windows Key + r and put below command in that %windir%\Microsoft.NET\Framework\v4.0.30319 and Hit enter then find 'aspnet_regsql.exe' file. It will open a wizard that you can follow to resolve this error.
This error mostly occurs when you didn't enabled Roles in your asp.net mvc project At starting before aspnet identity table automatically created.
You will need to make sure you run this so that the tables and objects are created on WinHost.com's SQL server.
Open visual studio command prompt from the Visual studio tools folder from the start menu
and type
aspnet_regsql
and follow the wizard to register the database for asp.net membership and role providers.
I've seen this before. The database you are using doesn't have the required database elements for the membership, role management and profile features. So you've got a couple of options:
Copy across the tables, stored procedures & views from your local SQL Server using SQL Management Studio or a similar application
Use the aspnet_regsql.exe tool to install the scripts from anew as per the instructions in this post (I don't believe you can use the tool against a remote database if it's locked down. So you'll have to export the scripts and run them manually)
I have the same problem- i copy/paste connectionString from SQL Object manager in Visual Studio and forget to type Initial Catalog=YourDatabaseName.
Check the schema the stored procedure belongs to on your host - it could be that it's not in the "dbo" schema.
e.g.
if it's within SomeOtherSchema, your call would need to be "SomeOtherSchema.aspnet_CheckSchemaVersion"
I had the exact same error when I had enabled <roleManager> believing I was enabling ASP.NET Identity 2. They are not the same! The <roleManager> enabled an old version of identity management which uses a different table structure to ASP.NET Identity 2 (which doesn't need "enabling" by the way - it's just there).
If you are intentionally using the old role-manager and still getting the error you might be looking at the default localdb instead of your database, in which case you can modify <roleManager> to point at any connection string you want:
<roleManager
enabled="true"
cacheRolesInCookie="true"
defaultProvider="OurSqlRoleProvider"
>
<providers>
<add
connectionStringName="DefaultConnection"
applicationName="/"
name="OurSqlRoleProvider"
type="System.Web.Security.SqlRoleProvider" />
</providers>
</roleManager>
If you are are after using ASP.NET Identity 2, here's an article on it:
http://johnatten.com/2014/04/20/asp-net-mvc-and-identity-2-0-understanding-the-basics/
In short you should recompile the aspnet provider dll using the sql username you were assigned from your hosting.
Download the
http://download.microsoft.com/download/a/b/3/ab3c284b-dc9a-473d-b7e3-33bacfcc8e98/ProviderToolkitSamples.msi
Replace from the source code all the
references to dbo with your hosting
database username
Compile (you need Visual Studio) and
place the
ProviderToolkitSampleProviders.dll in
the Bin folder
In your web.config replace the "type"
attribute of every line with
“Microsoft.Samples.,
ProviderToolkitSampleProviders”
Replace in you local sql server all dbo references with your hosting database username
Export the sql object creation script and run them on the remote database
Copy the records from your local sql table aspnet_SchemaVersions to the remote database
Another option, pheraps simpler to try, is to replace the dbo references in your local sql server database with your hosting database username, then upload and attach your mdf file.
Hope it helps
Thomas
The simplest solution is to add to the web.config file
<modules>
<remove name="RoleManager" />
</modules>
As Gabriel McAdams mentioned, I used aspnet_regsql.exe but because I am using Integrated Security=True in the connection string I used different flags and also note that the -S flag refers to the SQL Server instance name (in my case localhost\SQLEXPRESS) instead of the server name:
C:\Windows\Microsoft.NET\Framework\v4.0.30319>aspnet_regsql -S DBInstanceName -E -A all -d DBName