Related
I am trying to set up Ansible in a virtual enviroment before i install in the physical enviroment.( VmWare Workstation PRO)
I have the following setup:
3 x Ubunthu 14.04 server ( One Command server where Ansible is installed, 2 slaves)
Command Server
- Hostname:Command_server
- Ip:192.168.126.148
Slave1
Hostname:Slave1
IP Address:192.168.126.136
Slave2
Hostname:Slave2
IP Address:192.168.126.143
I have setup a user Ansible on all servers and placed the user in Sudo group.
I am able to SSH from the command server to both slave servers without anyone issue.
I have also copied over the keys to enable passwordless logging in.
I have the following in my Ansible Hosts file:
[Test]
192.168.126.136
192.168.126.143
[Test:vars]
ansible_user=ansible
ansible_password=test
However, when i run:
``` ansible 192.168.126.136 -m ping -vvvv
```
I get the following:
<192.168.126.136> ESTABLISH CONNECTION FOR USER: root
<192.168.126.136> REMOTE_MODULE ping
<192.168.126.136> EXEC ['ssh', '-C', '-tt', '-vvv', '-o', 'ControlMaster=auto', '-o', 'ControlPersist=60s', '-o', 'ControlPath=/root/.ansible/cp/ansible-ssh-%h-%p-%r', '-o', 'Port=22', '-o', 'KbdInteractiveAuthentication=no', '-o', 'PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey', '-o', 'PasswordAuthentication=no', '-o', 'ConnectTimeout=10', '192.168.126.136', "/bin/sh -c 'mkdir -p $HOME/.ansible/tmp/ansible-tmp-1597981104.12-67978757152079 && echo $HOME/.ansible/tmp/ansible-tmp-1597981104.12-67978757152079'"]
192.168.126.136 | FAILED => SSH encountered an unknown error. The output was:
OpenSSH_6.6.1, OpenSSL 1.0.1f 6 Jan 2014
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug1: auto-mux: Trying existing master
debug1: Control socket "/root/.ansible/cp/ansible-ssh-192.168.126.136-22-root" does not exist
debug2: ssh_connect: needpriv 0
debug1: Connecting to 192.168.126.136 [192.168.126.136] port 22.
debug2: fd 3 setting O_NONBLOCK
debug1: fd 3 clearing O_NONBLOCK
debug1: Connection established.
debug3: timeout: 10000 ms remain after connect
debug1: permanently_set_uid: 0/0
debug3: Incorrect RSA1 identifier
debug3: Could not load "/root/.ssh/id_rsa" as a RSA1 public key
debug1: identity file /root/.ssh/id_rsa type 1
debug1: identity file /root/.ssh/id_rsa-cert type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: identity file /root/.ssh/id_dsa-cert type -1
debug1: identity file /root/.ssh/id_ecdsa type -1
debug1: identity file /root/.ssh/id_ecdsa-cert type -1
debug1: identity file /root/.ssh/id_ed25519 type -1
debug1: identity file /root/.ssh/id_ed25519-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.6.1p1 Ubuntu-2ubuntu2.13
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1p1 Ubuntu-2ubuntu2.13
debug1: match: OpenSSH_6.6.1p1 Ubuntu-2ubuntu2.13 pat OpenSSH_6.6.1* compat 0x04000000
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "192.168.126.136" from file "/root/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /root/.ssh/known_hosts:2
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: ecdsa-sha2-nistp256-cert-v01#openssh.com,ecdsa-sha2-nistp384-cert-v01#openssh.com,ecdsa-sha2-nistp521-cert-v01#openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: curve25519-sha256#libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ecdsa-sha2-nistp256-cert-v01#openssh.com,ecdsa-sha2-nistp384-cert-v01#openssh.com,ecdsa-sha2-nistp521-cert-v01#openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519-cert-v01#openssh.com,ssh-rsa-cert-v01#openssh.com,ssh-dss-cert-v01#openssh.com,ssh-rsa-cert-v00#openssh.com,ssh-dss-cert-v00#openssh.com,ssh-ed25519,ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5-etm#openssh.com,hmac-sha1-etm#openssh.com,umac-64-etm#openssh.com,umac-128-etm#openssh.com,hmac-sha2-256-etm#openssh.com,hmac-sha2-512-etm#openssh.com,hmac-ripemd160-etm#openssh.com,hmac-sha1-96-etm#openssh.com,hmac-md5-96-etm#openssh.com,hmac-md5,hmac-sha1,umac-64#openssh.com,umac-128#openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5-etm#openssh.com,hmac-sha1-etm#openssh.com,umac-64-etm#openssh.com,umac-128-etm#openssh.com,hmac-sha2-256-etm#openssh.com,hmac-sha2-512-etm#openssh.com,hmac-ripemd160-etm#openssh.com,hmac-sha1-96-etm#openssh.com,hmac-md5-96-etm#openssh.com,hmac-md5,hmac-sha1,umac-64#openssh.com,umac-128#openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: zlib#openssh.com,zlib,none
debug2: kex_parse_kexinit: zlib#openssh.com,zlib,none
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: curve25519-sha256#libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256,ssh-ed25519
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5-etm#openssh.com,hmac-sha1-etm#openssh.com,umac-64-etm#openssh.com,umac-128-etm#openssh.com,hmac-sha2-256-etm#openssh.com,hmac-sha2-512-etm#openssh.com,hmac-ripemd160-etm#openssh.com,hmac-sha1-96-etm#openssh.com,hmac-md5-96-etm#openssh.com,hmac-md5,hmac-sha1,umac-64#openssh.com,umac-128#openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5-etm#openssh.com,hmac-sha1-etm#openssh.com,umac-64-etm#openssh.com,umac-128-etm#openssh.com,hmac-sha2-256-etm#openssh.com,hmac-sha2-512-etm#openssh.com,hmac-ripemd160-etm#openssh.com,hmac-sha1-96-etm#openssh.com,hmac-md5-96-etm#openssh.com,hmac-md5,hmac-sha1,umac-64#openssh.com,umac-128#openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib#openssh.com
debug2: kex_parse_kexinit: none,zlib#openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: setup hmac-md5-etm#openssh.com
debug1: kex: server->client aes128-ctr hmac-md5-etm#openssh.com zlib#openssh.com
debug2: mac_setup: setup hmac-md5-etm#openssh.com
debug1: kex: client->server aes128-ctr hmac-md5-etm#openssh.com zlib#openssh.com
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ECDSA c4:74:80:5f:48:75:a2:89:a2:0c:0f:26:a3:0c:c1:08
debug3: load_hostkeys: loading entries for host "192.168.126.136" from file "/root/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /root/.ssh/known_hosts:2
debug3: load_hostkeys: loaded 1 keys
debug1: Host '192.168.126.136' is known and matches the ECDSA host key.
debug1: Found key in /root/.ssh/known_hosts:2
debug1: ssh_ecdsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/id_rsa (0x564ae9324ef0),
debug2: key: /root/.ssh/id_dsa ((nil)),
debug2: key: /root/.ssh/id_ecdsa ((nil)),
debug2: key: /root/.ssh/id_ed25519 ((nil)),
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred gssapi-with-mic,gssapi-keyex,hostbased,publickey
debug3: authmethod_lookup publickey
debug3: remaining preferred: ,gssapi-keyex,hostbased,publickey
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /root/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug1: Trying private key: /root/.ssh/id_dsa
debug3: no such identity: /root/.ssh/id_dsa: No such file or directory
debug1: Trying private key: /root/.ssh/id_ecdsa
debug3: no such identity: /root/.ssh/id_ecdsa: No such file or directory
debug1: Trying private key: /root/.ssh/id_ed25519
debug3: no such identity: /root/.ssh/id_ed25519: No such file or directory
debug2: we did not send a packet, disable method
debug1: No more authentication methods to try.
Permission denied (publickey,enter code here
Someone kindly save me
I am trying to establish connectivity between two computers. I followed the same step for generating key and publishing the public key on the remote system. It worked fine from same source computer to few remote computers and not for few remote computer. Even after publishing the public key on the authorized_keys, ssh connectivity asks for password.
I have verified that .ssh is having 700 permission and authorized_keys & known_hosts file is in 644 permission. The same permission is on the computers where the ssh works fine. Below is the verbose output. Kindly help me in debugging.
Note: The source and target computers are RH and the SSH into the target using putty works fine.
Thanks in advance.
[root#eqvlgittooldr01 ~]# ssh -vvv user2#10.10.114.30
OpenSSH_6.6.1, OpenSSL 1.0.1e-fips 11 Feb 2013
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 56: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 10.10.114.30 [10.10.114.30] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug3: Incorrect RSA1 identifier
debug3: Could not load "/root/.ssh/id_rsa" as a RSA1 public key
debug1: identity file /root/.ssh/id_rsa type 1
debug1: identity file /root/.ssh/id_rsa-cert type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: identity file /root/.ssh/id_dsa-cert type -1
debug1: identity file /root/.ssh/id_ecdsa type -1
debug1: identity file /root/.ssh/id_ecdsa-cert type -1
debug1: identity file /root/.ssh/id_ed25519 type -1
debug1: identity file /root/.ssh/id_ed25519-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.6.1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1
debug1: match: OpenSSH_6.6.1 pat OpenSSH_6.6.1* compat 0x04000000
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "10.10.114.30" from file "/root/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /root/.ssh/known_hosts:12
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: ecdsa-sha2-nistp256-cert-v01#openssh.com,ecdsa-sha2-nistp384-cert-v01#openssh.com,ecdsa-sha2-nistp521-cert-v01#openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: curve25519-sha256#libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ecdsa-sha2-nistp256-cert-v01#openssh.com,ecdsa-sha2-nistp384-cert-v01#openssh.com,ecdsa-sha2-nistp521-cert-v01#openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519-cert-v01#openssh.com,ssh-rsa-cert-v01#openssh.com,ssh-dss-cert-v01#openssh.com,ssh-rsa-cert-v00#openssh.com,ssh-dss-cert-v00#openssh.com,ssh-ed25519,ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5-etm#openssh.com,hmac-sha1-etm#openssh.com,umac-64-etm#openssh.com,umac-128-etm#openssh.com,hmac-sha2-256-etm#openssh.com,hmac-sha2-512-etm#openssh.com,hmac-ripemd160-etm#openssh.com,hmac-sha1-96-etm#openssh.com,hmac-md5-96-etm#openssh.com,hmac-md5,hmac-sha1,umac-64#openssh.com,umac-128#openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5-etm#openssh.com,hmac-sha1-etm#openssh.com,umac-64-etm#openssh.com,umac-128-etm#openssh.com,hmac-sha2-256-etm#openssh.com,hmac-sha2-512-etm#openssh.com,hmac-ripemd160-etm#openssh.com,hmac-sha1-96-etm#openssh.com,hmac-md5-96-etm#openssh.com,hmac-md5,hmac-sha1,umac-64#openssh.com,umac-128#openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib#openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib#openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: curve25519-sha256#libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ecdsa-sha2-nistp256,ssh-ed25519
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5-etm#openssh.com,hmac-sha1-etm#openssh.com,umac-64-etm#openssh.com,umac-128-etm#openssh.com,hmac-sha2-256-etm#openssh.com,hmac-sha2-512-etm#openssh.com,hmac-ripemd160-etm#openssh.com,hmac-sha1-96-etm#openssh.com,hmac-md5-96-etm#openssh.com,hmac-md5,hmac-sha1,umac-64#openssh.com,umac-128#openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5-etm#openssh.com,hmac-sha1-etm#openssh.com,umac-64-etm#openssh.com,umac-128-etm#openssh.com,hmac-sha2-256-etm#openssh.com,hmac-sha2-512-etm#openssh.com,hmac-ripemd160-etm#openssh.com,hmac-sha1-96-etm#openssh.com,hmac-md5-96-etm#openssh.com,hmac-md5,hmac-sha1,umac-64#openssh.com,umac-128#openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib#openssh.com
debug2: kex_parse_kexinit: none,zlib#openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: setup hmac-md5-etm#openssh.com
debug1: kex: server->client aes128-ctr hmac-md5-etm#openssh.com none
debug2: mac_setup: setup hmac-md5-etm#openssh.com
debug1: kex: client->server aes128-ctr hmac-md5-etm#openssh.com none
debug1: kex: curve25519-sha256#libssh.org need=16 dh_need=16
debug1: kex: curve25519-sha256#libssh.org need=16 dh_need=16
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ECDSA 11:75:82:51:68:fc:35:c0:01:fd:f8:78:8b:f0:07:32
debug3: load_hostkeys: loading entries for host "10.10.114.30" from file "/root/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /root/.ssh/known_hosts:12
debug3: load_hostkeys: loaded 1 keys
debug1: Host '10.10.114.30' is known and matches the ECDSA host key.
debug1: Found key in /root/.ssh/known_hosts:12
debug1: ssh_ecdsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/id_rsa (0x7fa45045b760),
debug2: key: /root/.ssh/id_dsa ((nil)),
debug2: key: /root/.ssh/id_ecdsa ((nil)),
debug2: key: /root/.ssh/id_ed25519 ((nil)),
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic,password
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup gssapi-keyex
debug3: remaining preferred: gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-keyex
debug1: Next authentication method: gssapi-keyex
debug1: No valid Key exchange context
debug2: we did not send a packet, disable method
debug3: authmethod_lookup gssapi-with-mic
debug3: remaining preferred: publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-with-mic
debug1: Next authentication method: gssapi-with-mic
debug1: Unspecified GSS failure. Minor code may provide more information
No Kerberos credentials available (default cache: KEYRING:persistent:0)
debug1: Unspecified GSS failure. Minor code may provide more information
No Kerberos credentials available (default cache: KEYRING:persistent:0)
debug2: we did not send a packet, disable method
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /root/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
debug1: Trying private key: /root/.ssh/id_dsa
debug3: no such identity: /root/.ssh/id_dsa: No such file or directory
debug1: Trying private key: /root/.ssh/id_ecdsa
debug3: no such identity: /root/.ssh/id_ecdsa: No such file or directory
debug1: Trying private key: /root/.ssh/id_ed25519
debug3: no such identity: /root/.ssh/id_ed25519: No such file or directory
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
user2#10.10.114.30's password:
I write a SSH server with Twisted(15.5.0) Conch. But RFC 6668 defines hmac-sha2-512 MAC algorithms for twisted.conch.ssh don't support it.
I want to know how to fix it. I have
$ ssh -V
OpenSSH_6.6.1p1, OpenSSL 1.0.1e-fips 11 Feb 2013
(assh_env)[root#localhost asshpy]# python
Python 2.7.8 (default, Nov 30 2015, 10:44:42)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-16)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import twisted
>>> print twisted.version
[Twisted, version 16.6.0]
$ ssh 127.0.0.1 -m hmac-sha2-512 -vvv -p 2222
OpenSSH_6.6.1, OpenSSL 1.0.1e-fips 11 Feb 2013
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 41: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to localhost [127.0.0.1] port 2222.
debug2: fd 3 setting O_NONBLOCK
debug1: fd 3 clearing O_NONBLOCK
debug1: Connection established.
debug3: timeout: 9988 ms remain after connect
debug1: could not open key file '/etc/ssh/ssh_host_key': No such file or directory
debug1: could not open key file '/etc/ssh/ssh_host_dsa_key': No such file or directory
debug1: could not open key file '/etc/ssh/ssh_host_ecdsa_key': Permission denied
debug1: could not open key file '/etc/ssh/ssh_host_rsa_key': Permission denied
debug1: could not open key file '/etc/ssh/ssh_host_ed25519_key': Permission denied
debug1: could not open key file '/etc/ssh/ssh_host_dsa_key': No such file or directory
debug1: could not open key file '/etc/ssh/ssh_host_ecdsa_key': Permission denied
debug1: could not open key file '/etc/ssh/ssh_host_rsa_key': Permission denied
debug1: could not open key file '/etc/ssh/ssh_host_ed25519_key': Permission denied
debug1: identity file /home/chenjian.chj/.ssh/id_rsa type -1
debug1: identity file /home/chenjian.chj/.ssh/id_rsa-cert type -1
debug1: identity file /home/chenjian.chj/.ssh/id_dsa type -1
debug1: identity file /home/chenjian.chj/.ssh/id_dsa-cert type -1
debug1: identity file /home/chenjian.chj/.ssh/id_ecdsa type -1
debug1: identity file /home/chenjian.chj/.ssh/id_ecdsa-cert type -1
debug1: identity file /home/chenjian.chj/.ssh/id_ed25519 type -1
debug1: identity file /home/chenjian.chj/.ssh/id_ed25519-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.6.1
debug1: Remote protocol version 2.0, remote software version Twisted
debug1: no match: Twisted
debug2: fd 3 setting O_NONBLOCK
debug3: put_host_port: [127.0.0.1]:2222
debug3: load_hostkeys: loading entries for host "[127.0.0.1]:2222" from file "/dev/null"
debug3: load_hostkeys: loaded 0 keys
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: curve25519-sha256#libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ecdsa-sha2-nistp256-cert-v01#openssh.com,ecdsa-sha2-nistp384-cert-v01#openssh.com,ecdsa-sha2-nistp521-cert-v01#openssh.com,ssh-ed25519-cert-v01#openssh.com,ssh-rsa-cert-v01#openssh.com,ssh-dss-cert-v01#openssh.com,ssh-rsa-cert-v00#openssh.com,ssh-dss-cert-v00#openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519,ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: hmac-sha2-512
debug2: kex_parse_kexinit: hmac-sha2-512
debug2: kex_parse_kexinit: none,zlib#openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib#openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group1-sha1,diffie-hellman-group14-sha1
debug2: kex_parse_kexinit: ssh-rsa
debug2: kex_parse_kexinit: aes256-ctr,aes256-cbc,aes192-ctr,aes192-cbc,aes128-ctr,aes128-cbc,cast128-cbc,blowfish-cbc,3des-cbc
debug2: kex_parse_kexinit: aes256-ctr,aes256-cbc,aes192-ctr,aes192-cbc,aes128-ctr,aes128-cbc,cast128-cbc,blowfish-cbc,3des-cbc
debug2: kex_parse_kexinit: hmac-sha2-512,hmac-sha2-256,hmac-sha1,hmac-md5
debug2: kex_parse_kexinit: hmac-sha2-512,hmac-sha2-256,hmac-sha1,hmac-md5
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: setup hmac-sha2-512
debug1: kex: server->client aes128-ctr hmac-sha2-512 none
debug2: mac_setup: setup hmac-sha2-512
debug1: kex: client->server aes128-ctr hmac-sha2-512 none
debug1: kex: diffie-hellman-group14-sha1 need=64 dh_need=64
debug1: kex: diffie-hellman-group14-sha1 need=64 dh_need=64
debug2: bits set: 1009/2048
debug1: sending SSH2_MSG_KEXDH_INIT
debug1: expecting SSH2_MSG_KEXDH_REPLY
debug1: Server host key: RSA e4:63:c3:05:6c:37:bc:05:8d:94:8a:72:68:91:9c:24
debug3: put_host_port: [127.0.0.1]:2222
debug3: put_host_port: [127.0.0.1]:2222
debug3: load_hostkeys: loading entries for host "[127.0.0.1]:2222" from file "/dev/null"
debug3: load_hostkeys: loaded 0 keys
debug3: load_hostkeys: loading entries for host "[127.0.0.1]:2222" from file "/dev/null"
debug3: load_hostkeys: loaded 0 keys
debug1: checking without port identifier
debug3: load_hostkeys: loading entries for host "127.0.0.1" from file "/dev/null"
debug3: load_hostkeys: loaded 0 keys
Warning: Permanently added '[127.0.0.1]:2222' (RSA) to the list of known hosts.
debug2: bits set: 1013/2048
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
Corrupted MAC on input.
Disconnecting: Packet corrupt
In the twisted ssh server,the log is:
2016-12-22 10:10:44+0800 [SSHServerTransport,0,10.101.227.11] kex alg, key alg: 'diffie-hellman-group14-sha1' 'ssh-rsa'
2016-12-22 10:10:44+0800 [SSHServerTransport,0,10.101.227.11] outgoing: 'aes128-ctr' 'hmac-sha2-512' 'none'
2016-12-22 10:10:44+0800 [SSHServerTransport,0,10.101.227.11] incoming: 'aes128-ctr' 'hmac-sha2-512' 'none'
2016-12-22 10:10:44+0800 [SSHServerTransport,0,10.101.227.11] NEW KEYS
2016-12-22 10:10:44+0800 [SSHServerTransport,0,10.101.227.11] Disconnecting with error, code 5
reason: bad MAC
2016-12-22 10:10:44+0800 [SSHServerTransport,0,10.101.227.11] connection lost
You must upgrade to a more recent version of Twisted; 15.5.0 is not recent enough to implement hmac-sha2-512. If you don't have a working application yet, I would always recommend starting with the most recent version of Twisted.
I'm facing a login issue with SSH (dsa), here the scenario:
On my host I've created ssh keys for the user dx and set permission
of .ssh and id_dsa and id_dsa.pub
I sent the public key to the
remote provider, he installed the public key in the home directory
of the user cmc and he set permission for .ssh and authorized_keys
file
When I try to ssh into the machine I'm asked for a password; telnet to the host works fine instead.
This my command:
ssh -i /home/dx/.ssh/id_dsa cmc#212.183.xxx.xxx -vv
OpenSSH_6.6.1, OpenSSL 1.0.1k-fips 8 Jan 2015
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 56: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 212.183.129.139 [212.183.129.139] port 22.
debug1: Connection established.
debug1: identity file /home/dx/.ssh/id_dsa type 2
debug1: identity file /home/dx/.ssh/id_dsa-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.6.1
debug1: Remote protocol version 1.99, remote software version OpenSSH_4.4
debug1: match: OpenSSH_4.4 pat OpenSSH_4* compat 0x00000000
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: curve25519-sha256#libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa-cert-v01#openssh.com,ssh-rsa-cert-v00#openssh.com,ssh-rsa,ecdsa-sha2-nistp256-cert-v01#openssh.com,ecdsa-sha2-nistp384-cert-v01#openssh.com,ecdsa-sha2-nistp521-cert-v01#openssh.com,ssh-ed25519-cert-v01#openssh.com,ssh-dss-cert-v01#openssh.com,ssh-dss-cert-v00#openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm#openssh.com,aes256-gcm#openssh.com,chacha20-poly1305#openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5-etm#openssh.com,hmac-sha1-etm#openssh.com,umac-64-etm#openssh.com,umac-128-etm#openssh.com,hmac-sha2-256-etm#openssh.com,hmac-sha2-512-etm#openssh.com,hmac-ripemd160-etm#openssh.com,hmac-sha1-96-etm#openssh.com,hmac-md5-96-etm#openssh.com,hmac-md5,hmac-sha1,umac-64#openssh.com,umac-128#openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5-etm#openssh.com,hmac-sha1-etm#openssh.com,umac-64-etm#openssh.com,umac-128-etm#openssh.com,hmac-sha2-256-etm#openssh.com,hmac-sha2-512-etm#openssh.com,hmac-ripemd160-etm#openssh.com,hmac-sha1-96-etm#openssh.com,hmac-md5-96-etm#openssh.com,hmac-md5,hmac-sha1,umac-64#openssh.com,umac-128#openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib#openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib#openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc#lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc#lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib#openssh.com
debug2: kex_parse_kexinit: none,zlib#openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: setup hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: setup hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: kex: diffie-hellman-group-exchange-sha256 need=16 dh_need=16
debug1: kex: diffie-hellman-group-exchange-sha256 need=16 dh_need=16
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<3072<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: bits set: 1564/3072
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA c4:36:f5:6f:b6:e3:49:88:f7:d1:5b:2a:0b:57:8f:ef
debug1: Host '212.183.129.139' is known and matches the RSA host key.
debug1: Found key in /home/dx/.ssh/known_hosts:1
debug2: bits set: 1530/3072
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/dx/.ssh/id_dsa (0x55d28676a9a0), explicit
Unauthorised use is an offence pursuant
to the Computer Misuse Act 1990
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Offering DSA public key: /home/dx/.ssh/id_dsa
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug2: we did not send a packet, disable method
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug2: we did not send a packet, disable method
debug1: Next authentication method: password
Where the issue could be? Could be to 2 different user name?
Thanks!
If the remote provider copied the key you sent to the appropriate location, it should be working.
If you can ssh using a password for the user cmc, copy the key you have created using:
ssh-copy-id -i /home/dx/.ssh/id_dsa.pub cmc#212.183.xxx.xxx
Supply the password for cmc. After that you will be able to to run your command ssh -i /home/dx/.ssh/id_dsa cmc#212.183.xxx.xxx without issues.
I've been accessing my EC2 instance via SSH on Win7. I'm not trying to ssh it on another pc on Ubuntu 12.04, getting a "Permission denied (publickey)." error. I've been searching for this problem, and tried the following:
Deleted the existing key and created/downloaded a new one on EC2 dashboard.
Placed the new key in my ~/.ssh folder.
Changed the access permissions of the key with this command (Also tried 400):
chmod 600 ~/.ssh/leno.pem
Changed the access permissions of the .ssh folder with this command (Also tried 700):
chmod 755 ~/.ssh
Tried doing this as well:
add-ssh ~/.ssh/leno.pem
No luck. When I try run the following:
ssh -vvv -i ~/.ssh/leno.pem ubuntu#ec2-50-19-199-128.compute-1.amazonaws.com
I get this message:
OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to ec2-50-19-199-128.compute-1.amazonaws.com [50.19.199.128] port 22.
debug1: Connection established.
debug3: Incorrect RSA1 identifier
debug3: Could not load "/home/murat/.ssh/leno.pem" as a RSA1 public key
debug1: identity file /home/murat/.ssh/leno.pem type -1
debug1: identity file /home/murat/.ssh/leno.pem-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5p1 Debian-4ubuntu6
debug1: match: OpenSSH_5.5p1 Debian-4ubuntu6 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "ec2-50-19-199-128.compute-1.amazonaws.com" from file "/home/murat/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/murat/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: ssh-rsa-cert-v01#openssh.com,ssh-rsa-cert-v00#openssh.com,ssh-rsa
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa-cert-v01#openssh.com,ssh-rsa-cert-v00#openssh.com,ssh-rsa,ecdsa-sha2-nistp256-cert-v01#openssh.com,ecdsa-sha2-nistp384-cert-v01#openssh.com,ecdsa-sha2-nistp521-cert-v01#openssh.com,ssh-dss-cert-v01#openssh.com,ssh-dss-cert-v00#openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64#openssh.com,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64#openssh.com,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib#openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib#openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc#lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64#openssh.com,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64#openssh.com,hmac-ripemd160,hmac-ripemd160#openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib#openssh.com
debug2: kex_parse_kexinit: none,zlib#openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 142/256
debug2: bits set: 534/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA c4:de:26:09:64:6f:7c:48:6b:2b:ef:8c:c5:b7:cc:1f
debug3: load_hostkeys: loading entries for host "ec2-50-19-199-128.compute-1.amazonaws.com" from file "/home/murat/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/murat/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: load_hostkeys: loading entries for host "50.19.199.128" from file "/home/murat/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/murat/.ssh/known_hosts:2
debug3: load_hostkeys: loaded 1 keys
debug1: Host 'ec2-50-19-199-128.compute-1.amazonaws.com' is known and matches the RSA host key.
debug1: Found key in /home/murat/.ssh/known_hosts:1
debug2: bits set: 514/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: leno.pem (0x7feb7db9aa10)
debug2: key: /home/murat/.ssh/leno.pem ((nil))
debug1: Authentications that can continue: publickey
debug3: start over, passed a different list publickey
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: leno.pem
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey
debug1: Trying private key: /home/murat/.ssh/leno.pem
debug1: read PEM private key done: type RSA
debug3: sign_and_send_pubkey: RSA ab:3a:89:be:34:43:5a:40:5f:8a:0c:ba:5d:33:bd:cb
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey
debug2: we did not send a packet, disable method
debug1: No more authentication methods to try.
Permission denied (publickey).
How can I access my EC2 insance via ssh? What am I doing wrong?
When you do this:
Deleted the existing key and created/downloaded a new one on EC2
dashboard.
You do not change the key on existing instances. All you do is create a new key that could be assigned to newly launched instances.
You are connecting to the instance and it is responding. When you get this error it means that either the user you are connecting to does not exist, or your public key is not installed in that users authorized_keys file.
I resolved this problem by following below steps:
1- Grant permission to you ssh-key.pem with this command:
chmod 400 ssh-key.pem
2- Use command ssh-keygen to get publicKey and copy it:
ssh-keygen -y -f ssh-key.pem
3- Open your AWS console and select your instance and click on connect button.
4- Click on EC2 Instance connect and click on button connect to open remote terminal.
5- After that execute command:
vi ~/.ssh/authorized_keys
6- Change server key by your local generated key on step2.
7- Save your file.
8- open your local terminal.
9- Use this command to connect:
ssh -i ssh-key.pem ubuntu#yourIpAdress
I got this error:
Permission denied (publickey,gssapi-keyex,gssapi-with-mic).
The resolution was adding the ec2-user (default user) before the public dns.