Puppet: Syntax error with '$x.each...' - syntax-error

I have the code below:
define keepalived::vrrp_instance(
$state,
$interface,
$virtual_addresses,
$virtual_router_id,
$priority = $::keepalived::params::priority,
$advert_int = $::keepalived::params::advert_int,
$password = $::keepalived::params::password,
$notify_master = $::keepalived::params::notify_master,
$notify_backup = $::keepalived::params::notify_backup,
$notify_fault = $::keepalived::params::notify_fault,
$notify_all = $::keepalived::params::notify_all,
$smtp_alert = $::keepalived::params::smtp_alert,
) {
...
$virtual_addresses.each |$address| {
$splitted_address = split($address,' ')
if !is_ip_address($splitted_address[0]) {
fail("Error virtual_address Value: \"${address}\" not an ip address!")
}
}
...
}
$virtual_addresses is something like ['127.0.0.1 dev eth0','fd00::1 dev eth0']
Running the code I get the following error:
Syntax error at '.'; expected '}' at /etc/puppet/environments/ip6_dev/modules_custom/keepalived/manifests/vrrp_instance.pp:136 on node
Line 136 is "$virtual_addresses.each |$address| {"
I can't find a mistake (https://docs.puppetlabs.com/references/3.stable/function.html#each)
I am using Puppet 3.3.2

"note requires parser = future"
Ensure you are using future parser in puppet.
Set parser = future in your puppet.conf file or add the command line switch --parser=future
UPDATE:
Wrap your verification function:
define verify::wrapper ()
{
$ip_address = split($name,' ')
if !is_ip_address("${ip_address[0]}") {
fail("Error virtual_address Value: \"${ip_address[0]}\" not an ip address!")
}
}
Next use it:
define keepalived::vrrp_instance(...)
{
...
verify::wrapper{ $virtual_addresses : }
...
}

Related

Terraform 0.12.5 | Bigquery table resource doesn't support external data configuration block

I'm creating a module to make easy to provision a BigQuery table in GCP.
My module is working, but now I'm trying to add the option to create the table based in external data, like a GCS bucket.
In the doc (https://www.terraform.io/docs/providers/google/r/bigquery_table.html#external_data_configuration) are saying this configuration is supported, but I get only this error:
Acquiring state lock. This may take a few moments...
Error: Unsupported block type
on ../../modules/bq_table/main.tf line 24, in resource "google_bigquery_table" "default":
24: external_data_configuration {
Blocks of type "external_data_configuration" are not expected here.
Im using the last Terraform version (0.12.5) and google provider v2.10.0 in Mac OS.
Here is my module code in HCL2:
resource "google_bigquery_table" "default" {
dataset_id = "${terraform.workspace}_${var.bq_dataset_id}"
table_id = "${terraform.workspace}_${var.bq_table_id}"
project = (var.project_id != "" ? var.project_id : null)
description = (var.bq_table_description != "" ? var.project_id : null)
expiration_time = (var.bq_table_expiration_time != null ? var.project_id : null)
friendly_name = (var.bq_table_name != "" ? var.project_id : null)
dynamic "external_data_configuration" {
for_each = var.bq_table_external_data_configuration
content {
autodetect = true
source_format = "NEWLINE_DELIMITED_JSON"
source_uris = [external_data_configuration.value]
}
}
time_partitioning {
type = "DAY"
field = var.bq_table_partition_field
}
labels = var.bq_table_labels
schema = (var.bq_table_schema != "" ? var.bq_table_schema : null)
dynamic "view" {
for_each = (var.bq_table_view_query != "" ? {query = var.bq_table_view_query} : {})
content {
query = view.value
}
}
depends_on = ["null_resource.depends_on"]
}
Above im using Dynamic blocks, but tried to use normally and the error is the same.
The for_each property inside your dynamic block expects an array value. Try wrapping the input variable in an array:
dynamic "external_data_configuration" {
for_each = var.bq_table_external_data_configuration ? [var.bq_table_external_data_configuration] : []
content {
autodetect = true
source_format = "NEWLINE_DELIMITED_JSON"
source_uris = [external_data_configuration.value]
}
}
Conditional blocks are still a bit of a hassle even after Terraform 0.12; read here for more.

Test file structure in groovy(Spock)

How to test created and expected file tree in groovy(Spock)?
Right now I'm using Set where I specify paths which I expect to get and collecting actual paths in this way:
Set<String> getCreatedFilePaths(String root) {
Set<String> createFilePaths = new HashSet<>()
new File(root).eachFileRecurse {
createFilePaths << it.absolutePath
}
return createFilePaths
}
But the readability of the test isn't so good.
Is it possible in groovy to write expected paths as a tree, and after that compare with actual
For example, expected:
region:
usa:
new_york.json
california.json
europe:
spain.json
italy.json
And actual will be converted to this kind of tree.
Not sure if you can do it with the built-in recursive methods. There certainly are powerful ones, but this is standard recursion code you can use:
def path = new File("/Users/me/Downloads")
def printTree(File file, Integer level) {
println " " * level + "${file.name}:"
file.eachFile {
println " " * (level + 1) + it.name
}
file.eachDir {
printTree(it, level + 1)
}
}
printTree(path, 1)
That prints the format you describe
You can either build your own parser or use Groovy's built-in JSON parser:
package de.scrum_master.stackoverflow
import groovy.json.JsonParserType
import groovy.json.JsonSlurper
import spock.lang.Specification
class FileRecursionTest extends Specification {
def jsonDirectoryTree = """{
com : {
na : {
tests : [
MyBaseIT.groovy
]
},
twg : {
sample : {
model : [
PrimeNumberCalculatorSpec.groovy
]
}
}
},
de : {
scrum_master : {
stackoverflow : [
AllowedPasswordsTest.groovy,
CarTest.groovy,
FileRecursionTest.groovy,
{
foo : [
LoginIT.groovy,
LoginModule.groovy,
LoginPage.groovy,
LoginValidationPage.groovy,
User.groovy
]
},
LuceneTest.groovy
],
testing : [
GebTestHelper.groovy,
RestartBrowserIT.groovy,
SampleGebIT.groovy
]
}
}
}"""
def "Parse directory tree JSON representation"() {
given:
def jsonSlurper = new JsonSlurper(type: JsonParserType.LAX)
def rootDirectory = jsonSlurper.parseText(jsonDirectoryTree)
expect:
rootDirectory.de.scrum_master.stackoverflow.contains("CarTest.groovy")
rootDirectory.com.twg.sample.model.contains("PrimeNumberCalculatorSpec.groovy")
when:
def fileList = objectGraphToFileList("src/test/groovy", rootDirectory)
fileList.each { println it }
then:
fileList.size() == 14
fileList.contains("src/test/groovy/de/scrum_master/stackoverflow/CarTest.groovy")
fileList.contains("src/test/groovy/com/twg/sample/model/PrimeNumberCalculatorSpec.groovy")
}
List<File> objectGraphToFileList(String directoryPath, Object directoryContent) {
List<File> files = []
directoryContent.each {
switch (it) {
case String:
files << directoryPath + "/" + it
break
case Map:
files += objectGraphToFileList(directoryPath, it)
break
case Map.Entry:
files += objectGraphToFileList(directoryPath + "/" + (it as Map.Entry).key, (it as Map.Entry).value)
break
default:
throw new IllegalArgumentException("unexpected directory content value $it")
}
}
files
}
}
Please note:
I used new JsonSlurper(type: JsonParserType.LAX) in order to avoid having to quote each single String in the JSON structure. If your file names contain spaces or other special characters, you will have to use something like "my file name", though.
In rootDirectory.de.scrum_master.stackoverflow.contains("CarTest.groovy") you can see how you can nicely interact with the parsed JSON object graph in .property syntax. You might like it or not, need it or not.
Recursive method objectGraphToFileList converts the parsed object graph to a list of files (if you prefer a set, change it, but File.eachFileRecurse(..) should not yield any duplicates, so the set is not needed.
If you do not like the parentheses etc. in the JSON, you can still build your own parser.
You might want to add another utility method to create a JSON string like the given one from a validated directory structure, so you have less work when writing similar tests.
Modified Bavo Bruylandt answer to collect file tree paths, and sort it to not care about the order of files.
def "check directory structure"() {
expect:
String created = getCreatedFilePaths(new File("/tmp/region"))
String expected = new File("expected.txt").text
created == expected
}
private String getCreatedFilePaths(File root) {
List paths = new ArrayList()
printTree(root, 0, paths)
return paths.join("\n")
}
private void printTree(File file, Integer level, List paths) {
paths << ("\t" * level + "${file.name}:")
file.listFiles().sort{it.name}.each {
if (it.isFile()) {
paths << ("\t" * (level + 1) + it.name)
}
if (it.isDirectory()) {
collectFileTree(it, level + 1, paths)
}
}
}
And expected files put in the expected.txt file with indent(\t) in this way:
region:
usa:
new_york.json
california.json
europe:
spain.json
italy.json

Cant create new entry. PHPLDAPADMIN

I just installed LDAP and PHPLDAPADMIN.Its work fine but when I want Create new entry page just refresh and nothing happend.There are a few errors:
Unrecognized error number: 8192: Function create_function() is deprecated
Errors in phpldapadmin
Thank you.
Try this code working fine.
/usr/share/phpldapadmin/lib/functions.php on line 54
change line 54 to
function my_autoload($className) {
Add this code on line 777
spl_autoload_register("my_autoload");
change line 1083 to
$CACHE[$sortby] = __create_function('$a, $b',$code);
add the code below on line 1091 from the
function __create_function($arg, $body) {
static $cache = array();
static $maxCacheSize = 64;
static $sorter;
if ($sorter === NULL) {
$sorter = function($a, $b) {
if ($a->hits == $b->hits) {
return 0;
}
return ($a->hits < $b->hits) ? 1 : -1;
};
}
$crc = crc32($arg . "\\x00" . $body);
if (isset($cache[$crc])) {
++$cache[$crc][1];
return $cache[$crc][0];
}
if (sizeof($cache) >= $maxCacheSize) {
uasort($cache, $sorter);
array_pop($cache);
}
$cache[$crc] = array($cb = eval('return
function('.$arg.'){'.$body.'};'), 0);
return $cb;
}
finally restart your apache server sudo service apache2 restart
PhpLdapAdmin uses a few functions which are deprecated in PHP 7.2. Take a look at this fix:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=890127

I am stuck, mysqli_query() expects at least 2 parameters

I have a problem with a code in php it shows me this as errors.
register
mysqli_query() expects at least 2 parameters, 1 given in
C:\xampp\htdocs\search_engine\insert.php on line 99
And this is the code :
<?php
$db = new PDO('mysql:host=localhost;dbname=srgn;charset=utf8mb4', 'root', '123456');
if(isset($_POST["submit"]))
{
$s_link = $_POST["s_link"];
$s_key = $_POST["s_key"];
$s_des = $_POST["s_des"];
{
$sql = "insert(site_link, site_key, site_des) values('$s_link', '$s_key', '$s_des')";
$rs = mysqli_query($sql);
if($rs)
{
echo "<script> alert('Site uploaded successfully') </script>";
}
else
{
echo "<script> alert('Uploading failed, please try agin.') </script>";
}
}
}
?>
Where is the error please, and how can I set it?
Pass on the connection link as the first parameter and the SQL query as the second parameter. This is required as you are doing procedural code. Refer to the link below for more details
http://php.net/manual/en/mysqli.query.php

How can I read Variables from data pool with Selenium IDE?

I am using Selenium IDE to test a web based HR/SW system.
There is a screen that used to enter vacation for employees.
I am having nearly 3000 employee.
I built a test case that enter vacations for one employee using variables.
How can I repeat the test case for all 3000 employees without creating the test case 3000 times. It will take an impossible effort to do that. Note: Each employee is having different vacation data (Type, start date, End date)
Is there any way that I can use a file (Excel,....) that variable can use to read its data from?
Is there any solution for my case???
I will be very very grateful I any one could help me.
Thank you.
You could use an XML file as an input.
1) At first you have to add following user extensions:
sideflow.js - (http://51elliot.blogspot.com/2008/02/selenium-ide-goto.html - additionally this article explains how to add user extension files)
datadriven.js
include.js
At the moment I can't find links where I took the last two, therefore I will give their code in the end of my post. Code is taken from my working directory. You just put the code to correspondent files, then add files to SelemiunIDE user extension and use them.
2) Create an XML file test_data.xml:
<testdata>
<test employee="1" type="1" startDate="01.01.2013" endDate="01.02.2013" />
<test employee="2" type="1" startDate="01.02.2013" endDate="01.03.2013" />
<test employee="3" type="1" startDate="01.03.2013" endDate="01.04.2013" />
...
</testdata>
3) In your test case use code like this:
${DataPath} - full path to a directory with XML-files
<!--BEGIN LOOP-->
<tr>
<td>loadTestData</td>
<td>file://${DataDir}/test_data.xml</td>
<td></td>
</tr>
<tr>
<td>while</td>
<td>!testdata.EOF()</td>
<td></td>
</tr>
<tr>
<td>nextTestData</td>
<td></td>
<td></td>
</tr>
<tr>
<td>echo</td>
<td>employee=${employee} type=${type} ...</td>
<td></td>
</tr>
...
<!--END LOOP-->
<tr>
<td>endWhile</td>
<td></td>
<td></td>
</tr>
Used user extensions:
include.js
/**
* Original Developer: Jerry Qian(qqqiansjtucs#hotmail.com)
* Modified By: John Witchel (jwitchel#colevalleygroup.com)
* include extension for Selenium-IDE edition
* refer to includeCommand_2.1.3 for Selenium-Core edition
* #version 1.3
*
*/
function IDEIncludeCommand() {}
IDEIncludeCommand.LOG_PREFIX = "IDEIncludeCommand: ";
IDEIncludeCommand.BEGIN_TEMPLATE = "begin$Template$";
IDEIncludeCommand.END_TEMPLATE = "end$Template$";
IDEIncludeCommand.VERSION = "1.1";
IDEIncludeCommand.prototype.prepareTestCaseAsText = function(responseAsText, paramsArray) {
/**
* Prepare the HTML to be included in as text into the current testcase-HTML
* Strip all but the testrows (tr)
* Stripped will be:
* - whitespace (also new lines and tabs, so be careful wirt parameters relying on this),
* - comments (xml comments)
* Replace variable according to include-parameters
* note: the include-variables are replaced literally. selenium does it at execution time
* also note: all selenium-variables are available to the included commands, so mostly no include-parameters are necessary
*
* #param responseAsText table to be included as text (string)
* #return testRows array of tr elements (as string!) containing the commands to be included
*
* TODO:
* - selenium already can handle testcase-html. use selenium methods or functions instead
* - find better name for requester
*/
// removing new lines, carret return and tabs from response in order to work with regexp
var pageText = responseAsText.replace(/\r|\n|\t/g,"");
// remove comments
// begin comment, not a dash or if it's a dash it may not be followed by -> repeated, end comment
pageText = pageText.replace(/<!--(?:[^-]|-(?!->))*-->/g,"");
// find the content of the test table = <[spaces]table[char but not >]>....< /[spaces]table[chars but not >]>
var testText = pageText.match(/<\s*table[^>]*>(.*)<\/\s*table[^>]*>/i)[1];
// Replace <td></td> with <td> </td> for iE - credits Chris Astall
// rz: somehow in my IE 7 this is not needed but is not bad as well
testText = testText.replace(/<\s*td[^>]*>\s*<\s*\/td[^>]*>/ig,"<td></td>");// jq: no space
// replace vars with their values in testText
for ( var k = 0 ; k < paramsArray.length ; k++ ) {
var pair = paramsArray[k];
testText = testText.replace(pair[0],pair[1]);
}
// removes all < /tr>
// in order to split on < tr>
testText = testText.replace(/<\/\s*tr[^>]*>/ig,"");
// split on <tr>
var testRows = testText.split(/<\s*tr[^>]*>/i);
return testRows;
};
IDEIncludeCommand.prototype.getIncludeDocumentBySynchronRequest = function(includeUrl) {
/**
* Prepare and do the XMLHttp Request synchronous as selenium should not continue execution meanwhile
*
* note: the XMLHttp requester is returned (instead of e.g. its text) to let the caller decide to use xml or text
*
* selenium-dependency: uses extended String from htmlutils
*
* TODO use Ajax from prototype like this:
* var sjaxRequest = new Ajax.Request(url, {asynchronous:false});
* there is discussion about getting rid of prototype.js in developer forum.
* the ajax impl in xmlutils.js is not active by default in 0.8.2
*
* #param includeUrl URI to the include-document (document has to be from the same domain)
* #return XMLHttp requester after receiving the response
*/
var url = this.prepareUrl(includeUrl);
// the xml http requester to fetch the page to include
var requester = this.newXMLHttpRequest();
if (!requester) {
throw new Error("XMLHttp requester object not initialized");
}
requester.open("GET", url, false); // synchron mode ! (we don't want selenium to go ahead)
try {
requester.send(null);
} catch(e) {
throw new Error("Error while fetching url '" + url + "' details: " + e);
}
if ( requester.status != 200 && requester.status !== 0 ) {
throw new Error("Error while fetching " + url + " server response has status = " + requester.status + ", " + requester.statusText );
}
return requester;
};
IDEIncludeCommand.prototype.prepareUrl = function(includeUrl) {
/** Construct absolute URL to get include document
* using selenium-core handling of urls (see absolutify in htmlutils.js)
*/
var prepareUrl;
// htmlSuite mode of SRC? TODO is there a better way to decide whether in SRC mode?
if (window.location.href.indexOf("selenium-server") >= 0) {
LOG.debug(IDEIncludeCommand.LOG_PREFIX + "we seem to run in SRC, do we?");
preparedUrl = absolutify(includeUrl, htmlTestRunner.controlPanel.getTestSuiteName());
} else {
preparedUrl = absolutify(includeUrl, selenium.browserbot.baseUrl);
}
LOG.debug(IDEIncludeCommand.LOG_PREFIX + "using url to get include '" + preparedUrl + "'");
return preparedUrl;
};
IDEIncludeCommand.prototype.newXMLHttpRequest = function() {
// TODO should be replaced by impl. in prototype.js or xmlextras.js
// but: there is discussion of getting rid of prototype.js
// and: currently xmlextras.js is not activated in testrunner of 0.8.2 release
var requester = 0;
var exception = '';
// see http://developer.apple.com/internet/webcontent/xmlhttpreq.html
// changed order of native and activeX to get it working with native
// xmlhttp in IE 7. credits dhwang
try {
// for IE/ActiveX
if(window.ActiveXObject) {
try {
requester = new ActiveXObject("Msxml2.XMLHTTP");
}
catch(e) {
requester = new ActiveXObject("Microsoft.XMLHTTP");
}
}
// Native XMLHttp
else if(window.XMLHttpRequest) {
requester = new XMLHttpRequest();
}
}
catch(e) {
throw new Error("Your browser has to support XMLHttpRequest in order to use include \n" + e);
}
return requester;
};
IDEIncludeCommand.prototype.splitParamStrIntoVariables = function(paramString) {
/**
* Split include Parameters-String into an 2-dim array containing Variable-Name and -Value
*
* selenium-dependency: uses extended String from htmlutils
*
* TODO: write jsunit tests - this could be easy (if there were not the new RegExp)
*
* #param includeParameters string the parameters from include call
* #return new 2-dim Array containing regExpName (to find a matching variablename) and value to be substituted for
*/
var newParamsArray = new Array();
// paramString shall contains a list of var_name=value
var paramListPattern = /([^=,]+=[^=,]*,)*([^=,]+=[^=,]*)/;
if (! paramString || paramString === "") {
return newParamsArray;
} else if (paramString.match( paramListPattern )) {
// parse parameters to fill newParamsArray
var pairs = paramString.split(",");
for ( var i = 0 ; i < pairs.length ; i++ ) {
var pair = pairs[i];
var nameValue = pair.split("=");
//rz: use String.trim from htmlutils.js of selenium to get rid of whitespace in variable-name(s)
var trimmedNameValue = new String(nameValue[0]).trim();
// the pattern to substitute is ${var_name}
var regExpName = new RegExp("\\$\\{" + trimmedNameValue + "\\}", "g");
if (nameValue.length < 3) {
newParamsArray.push(new Array(regExpName,nameValue[1]));
} else {
var varValue = new String(nameValue[1]);
for (var j = 2; j < nameValue.length; j++) {
varValue=varValue.concat("="+nameValue[j]);
}
newParamsArray.push(new Array(regExpName,varValue));
}
}
} else {
throw new Error("Bad format for parameters list : '" + paramString + "'");
}
return newParamsArray;
};
IDEIncludeCommand.prototype.doInclude = function(locator, paramString) {
// Rewrite logic for Selenium IDE by Jerry Qian
var currentSelHtmlTestcase = testCase;
var includeCmdRow = testCase.debugContext.currentCommand();
if (!includeCmdRow) {
throw new Error("IDEIncludeCommand: failed to find include-row in source testtable");
}
var paramsArray = this.splitParamStrIntoVariables(paramString);
var inclDoc = this.getIncludeDocumentBySynchronRequest(locator);
// Get an array of commands from the include text with all whitespace stripped
var includedTestCaseHtml = this.prepareTestCaseAsText(inclDoc.responseText, paramsArray);
this.injectIncludeTestCommands(locator,includeCmdRow,includedTestCaseHtml);
};
IDEIncludeCommand.prototype.injectIncludeTestCommands = function(locator,includeCmdRow, testRows) {
// Rewrite logic for Selenium IDE by Jerry Qian
var newCommands = new Array();
// skip first element as it is empty or <tbody>
for (var i = 1 ; i < testRows.length; i++) {
if(i == 1){// add BEGIN-END block
var beginCommand = new Command(IDEIncludeCommand.BEGIN_TEMPLATE,locator,"");
newCommands.push(beginCommand);
}
var newText = testRows[i];
if(newText.match(/<\s*td.*colspan=.*>(.*)<\/\s*td[^>]*>/i)){//delete comment step
continue;
}
// removes all < /td>
// in order to split on <td>
newText = newText.replace(/<\/\s*td[^>]*>\s*<\/\s*tbody[^>]*>/ig,""); //remove </tbody>first
newText = newText.replace(/<\/\s*td[^>]*>/ig,"");
var newCols = newText.split(/<\s*td[^>]*>/i);
var new_cmd,new_target,new_value;
for (var j = 1 ; j < newCols.length; j++) {//skip 0
if(j == 1) {
new_cmd = newCols[j].replace(/\s/g,"");//trim \s
}else if(j == 2) {
new_target = newCols[j].replace(/\s+$/g,"");//trim end \s
}else if(j == 3) {
new_value = newCols[j].replace(/\s+$/g,"");//trim end \s
}
}
var newCommand = new Command(new_cmd,new_target,new_value);
newCommands.push(newCommand); //correct all steps
}
var endCommand = new Command(IDEIncludeCommand.END_TEMPLATE,locator,"");
newCommands.push(endCommand);//add BEGIN-END block
var cmsBefore = testCase.commands.slice(0,testCase.debugContext.debugIndex + 1);
var cmdsBehind = testCase.commands.slice(testCase.debugContext.debugIndex + 1, testCase.commands.length);
testCase.commands = cmsBefore.concat(newCommands).concat(cmdsBehind);//Injection
// Don't inject if it appears the injection has already been done
// (i.e., if the next command is the BEGIN).
if (testCase.commands.length <= testCase.debugContext.debugIndex+1
|| beginCommand.toString() != testCase.commands[testCase.debugContext.debugIndex+1].toString())
{
// The include command cannot be the last command in the TestCase, or else
// the de-injection code in doEnd$Template$ will cause an error. So we'll
// add a simple echo if it is the last.
if (testCase.commands.length == testCase.debugContext.debugIndex+1)
{
// Using concat instead of push so that we don't trigger the TestCase's set-modified flag.
testCase.commands = testCase.commands.concat(new Command("echo", "The include command cannot be the last line in a TestCase, so this command was added. It can be left in place or removed, as desired.", "The include command cannot be the last line in a TestCase, so this command was added. It can be left in place or removed, as desired."));
}
// This is original code.
var cmsBefore = testCase.commands.slice(0,testCase.debugContext.debugIndex + 1);
var cmdsBehind = testCase.commands.slice(testCase.debugContext.debugIndex + 1, testCase.commands.length);
testCase.commands = cmsBefore.concat(newCommands).concat(cmdsBehind);//Injection
}
};
Selenium.prototype.doInclude = function(locator, paramString) {
LOG.debug(IDEIncludeCommand.LOG_PREFIX + "Version " + IDEIncludeCommand.VERSION);
var ideIncludeCommand = new IDEIncludeCommand();
ideIncludeCommand.doInclude(locator, paramString);
// If goto scripts exist then reindex the labels. goto_sel_ide.js creates an array of labels when the
// script is initialized but an included file's labels are not part of that initial read, so this function
// re-initializes that array with the included files labels (if any). If goto_sel.ide.js is not included
// it's ignored.
try {
this.initialiseLabels();
}
catch (e) {
LOG.debug("Goto Script not used.");
}
};
// Array to hold the starting position of the Begin$Template$ marker. Pushing and popping the position onto an array
// allows us to correctly handle nested includes during clean up.
var beginTemplateIndex = new Array();
// Mark the beginning of the include
Selenium.prototype.doBegin$Template$ = function(locator){
LOG.info("Begin Template " + locator + " at position " + testCase.debugContext.debugIndex);
// Add the current position to the tail of the beginTemplateIndex
beginTemplateIndex.push(testCase.debugContext.debugIndex);
};
// Clean up everything between the closest Begin$Template$ and this $End$Template$, and pop the position off the array.
Selenium.prototype.doEnd$Template$ = function(locator){
// Remove the last Begin$Template$ from the tail of the beginTemplateIndex
var currentBeginTemplateIndex = beginTemplateIndex.pop();
LOG.info("End Template " + locator + " at position " + currentBeginTemplateIndex);
// Delete the commands that we injected in injectIncludeTestCommands.
testCase.commands =
testCase.commands.slice(0,currentBeginTemplateIndex).concat(
testCase.commands.slice(testCase.debugContext.debugIndex+1, testCase.commands.length));
// Set the current command to the next one after the injected block.
testCase.debugContext.debugIndex = currentBeginTemplateIndex-1;
//Must refresh to syncup UI
editor.view.refresh();
};
datadriven.js
/************************************ DATADRIVEN EXTENSION START ********************************************/
/*
NAME:
datadriven
Licensed under Apache License v2
http://www.apache.org/licenses/LICENSE-2.0
PURPOSE:
Basic data driven testing.
Full documentation at http://wiki.openqa.org/display/SEL/datadriven
EXAMPLE USE:
The structure of your data driven test case will be;
-------------------------------------------
COMMAND |TARGET |VALUE
-------------------------------------------
loadTestData |<file path> |
while |!testdata.EOF() |
testcommand1 | |
testcommand...| |
testcommandn | |
endWhile | |
-------------------------------------------
AUTHOR:
Jonathan McBrien
jonathan#mcbrien.org
2008-10-22: v0.1: Initial version.
2009-01-16: v0.2: Updated for Firefox 3.
xmlTestData.prototype.load now uses the include extension's getIncludeDocumentBySynchronRequest method for better portability.
(Why reinvent the wheel? :) - with appreciation to the include extension's authors.)
*/
XML.serialize = function(node) {
if (typeof XMLSerializer != "undefined")
return (new XMLSerializer()).serializeToString(node) ;
else if (node.xml) return node.xml;
else throw "XML.serialize is not supported or can't serialize " + node;
}
function xmlTestData() {
this.xmlDoc = null;
this.testdata = null;
this.index = null;
}
xmlTestData.prototype.load = function(xmlloc) {
loader = new IDEIncludeCommand();
var xmlHttpReq = loader.getIncludeDocumentBySynchronRequest(xmlloc);
this.xmlDoc = xmlHttpReq.responseXML;
this.index = 0;
this.testdata = this.xmlDoc.getElementsByTagName("test");
if (this.testdata == null || this.testdata.length == 0) {
throw new Error("Test data couldn't be loaded or test data was empty.");
}
}
xmlTestData.prototype.EOF = function() {
if (this.index != null && this.index < this.testdata.length) return false;
return true;
}
xmlTestData.prototype.more = function() {
return !this.EOF();
}
xmlTestData.prototype.next = function() {
if (this.EOF()) {
LOG.error("No test data.");
return;
}
LOG.info(XML.serialize(this.testdata[this.index])); // Log should anything go wrong while testing with this data.
if (this.testdata[this.index].attributes.length != this.testdata[0].attributes.length) {
LOG.error("Inconsistent attribute length in test data.");
return;
}
for (i=0; i<this.testdata[this.index].attributes.length; i++){
if (null == this.testdata[0].getAttribute(this.testdata[this.index].attributes[i].nodeName)) {
LOG.error("Inconsistent attribute names in test data.");
return;
}
selenium.doStore(this.testdata[this.index].attributes[i].nodeValue, this.testdata[this.index].attributes[i].nodeName);
}
this.index++;
}
Selenium.prototype.testdata = null;
Selenium.prototype.doLoadTestData = function(xmlloc) {
testdata = new xmlTestData();
testdata.load(xmlloc);
};
Selenium.prototype.doNextTestData = function() {
testdata.next();
};
/************************************ DATADRIVEN EXTENSION END **********************************************/
Current solution is a SelBlocks component which allows you to do cycles according to the dataset in XML
ForXML | XMLFileName.XML
... test case steps
EndForXML
The XML should have specific structure
<testdata>
<vars storedVariable1="xxxxx" storedVariable2="yyyyy" .. storedVariableN="zzzzz" />
.. other record(s)
</testdata>
Each stored variable vill be available in test case as ${storedVariableN}.
You can produce XML by MS Excel or LibreOffice using Formulas like this one and copy it to whole table:
="<vars "&
" "&$A$1&"="""&A2&""" "&
" "&$B$1&"="""&B2&""" "&
..
" "&$X$1&"="""&X2&""" "&
"/>")
XML can be easily copypasted after each change of the dataset.
Selblocks contains the while, datadriven, goto, loop and other extensions mentioned in previous answers. You can use other functionalities of the Selblocks as conditional jumps, conditions, catch-try blocks, functions, etc. See full reference here: http://refactoror.wikia.com/wiki/Selblocks_Reference
Beware with new Selenium 3 release and Sel Core absence it is not guaranteed, that tests with Selblock addon will work in the future versions of the firefox.
You can also check this very nice blog article:
http://seleniumworks.blogspot.com/2014/01/selenium-ide-data-driven.html
This gives an explanation on how to use the needed plugins and where to download them from. It worked perfectly for me.
This answer pretty much has the same approach as the one provided by #Yevgen Ulyanenkov as I used his answer in order to find the above article. But has some more googling to it that hopefully will be helpful to someone.
I think you need to use loop I don't see your code so just check this one for selenium-ide loop If you have any more problem if so comment my answer. I can't comment into your question because reputation is not enough so. If possible please add your code into your question.