In sql Server I join two query using UNION and my "Address" column has nText datatype so it's have an issue in Distinct. So i have to convert Address column nText to varchar but in output i got symbolic data in Adress. Actual data is in our local 'Gujarati' Language.
varchar: Variable-length, non-Unicode character data. The database collation determines which code page the data is stored using.
nvarchar: Variable-length Unicode character data. Dependent on the database collation for comparisons.
so change your type varchar to nvarchar it will sort your issue..
Same issue face by me during storing arabic charachters
Please use "nvarchar" instead of "varchar"
The n in ntext basically means "Unicode." In order to maintain those characters, you need to cast to another Unicode type.
The Unicode equivalent to varchar is nvarchar, so your query might end up looking like:
SELECT DISTINCT CONVERT(nvarchar(max), [Address])
FROM YourTable
Related
I created a database in SQL Server with COLLATION KR949_BIN2, which means that the codepage of this database is 949.
Is it possible to get the encoded value of a character based on the codepage in this database?
For example, the encoded value of character '좩' in codepage 949 is 0xA144, is there a SQL statement that I can get 0xA144 from char '좩' in this database?
Also, is there a way to insert '좩' into a column by its encoded value 0xA144?
Based on Character data is represented incorrectly when the code page of the client computer differs from the code page of the database in SQL Server 2005 I suspect that you're actually using the Korean_Wansung_CI_AS collation or something similar:
Method 2: Use an appropriate collation for the database
If you must use a non-Unicode data type, always make sure that the code page of the database and the code page of any non-Unicode columns can store the non-Unicode data correctly. For example, if you want to store code page 949 (Korean) character data, use a Korean collation for the database. For example, use the Korean_Wansung_CI_AS collation for the database.
That being the case, yes, you can see and insert 0xA144 as per the following example:
create table #Wansung (
[Description] varchar(50),
Codepoint varchar(50) collate Korean_Wansung_CI_AS
);
insert #Wansung ([Description], Codepoint)
select 'U+C8A9 Hangul Syllable Jwaeg', N'좩';
insert #Wansung ([Description], Codepoint)
select 'From Windows-949 encoding', 0xA144;
select [Description], Codepoint, cast(Codepoint as varbinary(max)) as Bytes, cast(unicode(Codepoint) as varbinary(max)) as UTF32
from #Wansung;
Which returns the results:
Description
Codepoint
Bytes
UTF32
U+C8A9 Hangul Syllable Jwaeg
좩
0xA144
0x0000C8A9
From Windows-949 encoding
좩
0xA144
0x0000C8A9
I have seen prefix N in some insert T-SQL queries. Many people have used N before inserting the value in a table.
I searched, but I was not able to understand what is the purpose of including the N before inserting any strings into the table.
INSERT INTO Personnel.Employees
VALUES(N'29730', N'Philippe', N'Horsford', 20.05, 1),
What purpose does this 'N' prefix serve, and when should it be used?
It's declaring the string as nvarchar data type, rather than varchar
You may have seen Transact-SQL code that passes strings around using
an N prefix. This denotes that the subsequent string is in Unicode
(the N actually stands for National language character set). Which
means that you are passing an NCHAR, NVARCHAR or NTEXT value, as
opposed to CHAR, VARCHAR or TEXT.
To quote from Microsoft:
Prefix Unicode character string constants with the letter N. Without
the N prefix, the string is converted to the default code page of the
database. This default code page may not recognize certain characters.
If you want to know the difference between these two data types, see this SO post:
What is the difference between varchar and nvarchar?
Let me tell you an annoying thing that happened with the N' prefix - I wasn't able to fix it for two days.
My database collation is SQL_Latin1_General_CP1_CI_AS.
It has a table with a column called MyCol1. It is an Nvarchar
This query fails to match Exact Value That Exists.
SELECT TOP 1 * FROM myTable1 WHERE MyCol1 = 'ESKİ'
// 0 result
using prefix N'' fixes it
SELECT TOP 1 * FROM myTable1 WHERE MyCol1 = N'ESKİ'
// 1 result - found!!!!
Why? Because latin1_general doesn't have big dotted İ that's why it fails I suppose.
1. Performance:
Assume your where clause is like this:
WHERE NAME='JON'
If the NAME column is of any type other than nvarchar or nchar, then you should not specify the N prefix. However, if the NAME column is of type nvarchar or nchar, then if you do not specify the N prefix, then 'JON' is treated as non-unicode. This means the data type of NAME column and string 'JON' are different and so SQL Server implicitly converts one operand’s type to the other. If the SQL Server converts the literal’s type
to the column’s type then there is no issue, but if it does the other way then performance will get hurt because the column's index (if available) wont be used.
2. Character set:
If the column is of type nvarchar or nchar, then always use the prefix N while specifying the character string in the WHERE criteria/UPDATE/INSERT clause. If you do not do this and one of the characters in your string is unicode (like international characters - example - ā) then it will fail or suffer data corruption.
Assuming the value is nvarchar type for that only we are using N''
I have seen prefix N in some insert T-SQL queries. Many people have used N before inserting the value in a table.
I searched, but I was not able to understand what is the purpose of including the N before inserting any strings into the table.
INSERT INTO Personnel.Employees
VALUES(N'29730', N'Philippe', N'Horsford', 20.05, 1),
What purpose does this 'N' prefix serve, and when should it be used?
It's declaring the string as nvarchar data type, rather than varchar
You may have seen Transact-SQL code that passes strings around using
an N prefix. This denotes that the subsequent string is in Unicode
(the N actually stands for National language character set). Which
means that you are passing an NCHAR, NVARCHAR or NTEXT value, as
opposed to CHAR, VARCHAR or TEXT.
To quote from Microsoft:
Prefix Unicode character string constants with the letter N. Without
the N prefix, the string is converted to the default code page of the
database. This default code page may not recognize certain characters.
If you want to know the difference between these two data types, see this SO post:
What is the difference between varchar and nvarchar?
Let me tell you an annoying thing that happened with the N' prefix - I wasn't able to fix it for two days.
My database collation is SQL_Latin1_General_CP1_CI_AS.
It has a table with a column called MyCol1. It is an Nvarchar
This query fails to match Exact Value That Exists.
SELECT TOP 1 * FROM myTable1 WHERE MyCol1 = 'ESKİ'
// 0 result
using prefix N'' fixes it
SELECT TOP 1 * FROM myTable1 WHERE MyCol1 = N'ESKİ'
// 1 result - found!!!!
Why? Because latin1_general doesn't have big dotted İ that's why it fails I suppose.
1. Performance:
Assume your where clause is like this:
WHERE NAME='JON'
If the NAME column is of any type other than nvarchar or nchar, then you should not specify the N prefix. However, if the NAME column is of type nvarchar or nchar, then if you do not specify the N prefix, then 'JON' is treated as non-unicode. This means the data type of NAME column and string 'JON' are different and so SQL Server implicitly converts one operand’s type to the other. If the SQL Server converts the literal’s type
to the column’s type then there is no issue, but if it does the other way then performance will get hurt because the column's index (if available) wont be used.
2. Character set:
If the column is of type nvarchar or nchar, then always use the prefix N while specifying the character string in the WHERE criteria/UPDATE/INSERT clause. If you do not do this and one of the characters in your string is unicode (like international characters - example - ā) then it will fail or suffer data corruption.
Assuming the value is nvarchar type for that only we are using N''
I have seen prefix N in some insert T-SQL queries. Many people have used N before inserting the value in a table.
I searched, but I was not able to understand what is the purpose of including the N before inserting any strings into the table.
INSERT INTO Personnel.Employees
VALUES(N'29730', N'Philippe', N'Horsford', 20.05, 1),
What purpose does this 'N' prefix serve, and when should it be used?
It's declaring the string as nvarchar data type, rather than varchar
You may have seen Transact-SQL code that passes strings around using
an N prefix. This denotes that the subsequent string is in Unicode
(the N actually stands for National language character set). Which
means that you are passing an NCHAR, NVARCHAR or NTEXT value, as
opposed to CHAR, VARCHAR or TEXT.
To quote from Microsoft:
Prefix Unicode character string constants with the letter N. Without
the N prefix, the string is converted to the default code page of the
database. This default code page may not recognize certain characters.
If you want to know the difference between these two data types, see this SO post:
What is the difference between varchar and nvarchar?
Let me tell you an annoying thing that happened with the N' prefix - I wasn't able to fix it for two days.
My database collation is SQL_Latin1_General_CP1_CI_AS.
It has a table with a column called MyCol1. It is an Nvarchar
This query fails to match Exact Value That Exists.
SELECT TOP 1 * FROM myTable1 WHERE MyCol1 = 'ESKİ'
// 0 result
using prefix N'' fixes it
SELECT TOP 1 * FROM myTable1 WHERE MyCol1 = N'ESKİ'
// 1 result - found!!!!
Why? Because latin1_general doesn't have big dotted İ that's why it fails I suppose.
1. Performance:
Assume your where clause is like this:
WHERE NAME='JON'
If the NAME column is of any type other than nvarchar or nchar, then you should not specify the N prefix. However, if the NAME column is of type nvarchar or nchar, then if you do not specify the N prefix, then 'JON' is treated as non-unicode. This means the data type of NAME column and string 'JON' are different and so SQL Server implicitly converts one operand’s type to the other. If the SQL Server converts the literal’s type
to the column’s type then there is no issue, but if it does the other way then performance will get hurt because the column's index (if available) wont be used.
2. Character set:
If the column is of type nvarchar or nchar, then always use the prefix N while specifying the character string in the WHERE criteria/UPDATE/INSERT clause. If you do not do this and one of the characters in your string is unicode (like international characters - example - ā) then it will fail or suffer data corruption.
Assuming the value is nvarchar type for that only we are using N''
I have seen prefix N in some insert T-SQL queries. Many people have used N before inserting the value in a table.
I searched, but I was not able to understand what is the purpose of including the N before inserting any strings into the table.
INSERT INTO Personnel.Employees
VALUES(N'29730', N'Philippe', N'Horsford', 20.05, 1),
What purpose does this 'N' prefix serve, and when should it be used?
It's declaring the string as nvarchar data type, rather than varchar
You may have seen Transact-SQL code that passes strings around using
an N prefix. This denotes that the subsequent string is in Unicode
(the N actually stands for National language character set). Which
means that you are passing an NCHAR, NVARCHAR or NTEXT value, as
opposed to CHAR, VARCHAR or TEXT.
To quote from Microsoft:
Prefix Unicode character string constants with the letter N. Without
the N prefix, the string is converted to the default code page of the
database. This default code page may not recognize certain characters.
If you want to know the difference between these two data types, see this SO post:
What is the difference between varchar and nvarchar?
Let me tell you an annoying thing that happened with the N' prefix - I wasn't able to fix it for two days.
My database collation is SQL_Latin1_General_CP1_CI_AS.
It has a table with a column called MyCol1. It is an Nvarchar
This query fails to match Exact Value That Exists.
SELECT TOP 1 * FROM myTable1 WHERE MyCol1 = 'ESKİ'
// 0 result
using prefix N'' fixes it
SELECT TOP 1 * FROM myTable1 WHERE MyCol1 = N'ESKİ'
// 1 result - found!!!!
Why? Because latin1_general doesn't have big dotted İ that's why it fails I suppose.
1. Performance:
Assume your where clause is like this:
WHERE NAME='JON'
If the NAME column is of any type other than nvarchar or nchar, then you should not specify the N prefix. However, if the NAME column is of type nvarchar or nchar, then if you do not specify the N prefix, then 'JON' is treated as non-unicode. This means the data type of NAME column and string 'JON' are different and so SQL Server implicitly converts one operand’s type to the other. If the SQL Server converts the literal’s type
to the column’s type then there is no issue, but if it does the other way then performance will get hurt because the column's index (if available) wont be used.
2. Character set:
If the column is of type nvarchar or nchar, then always use the prefix N while specifying the character string in the WHERE criteria/UPDATE/INSERT clause. If you do not do this and one of the characters in your string is unicode (like international characters - example - ā) then it will fail or suffer data corruption.
Assuming the value is nvarchar type for that only we are using N''