I have looked at a bunch of questions like this, but I have only found formulas, and VB examples that don't appear to check the values of cells in a column.
I was able to derive the following formula in Excel:
=IF(AND(ISNUMBER(SEARCH("Cat",R2)),OR(ISNUMBER(SEARCH("5E",R2)),ISNUMBER(SEARCH("6",R2))), ISNUMBER(SEARCH("Patch",R2)), ISNUMBER(SEARCH("Cables",R2))), "CAT 5E Ethernet Cables")
The problem is that this formula only checks for 1 out of 500 possible values. This is not productive. Plus, I have to make it one big formula when I check the entire row, because if I don't, the formula overwrites the result of the previous formula...
So, Visual Basic... I think I may have better luck scripting some kind of IF ELSE or CASE statement. I just do not understand how to do this in excel. I need to achieve the same thing as the formula above, but instead of checking for one set of conditions,
I need to check for multiple, and populate the S & T columns based on the result of each set of conditions.
I found this webpage that just mentions Excel and shows a VB IF - ELSE statement. How can I make this statement check Excel columns?
I tried the selected answer in this post with no luck:
Private Sub UpdateCategories()
Dim x As Long
For x = 1 To 5000
If InStr(1, Sheet1.Range("$B$" & x), "cat") > 0 And InStr(1, Sheet1.Range("$B$" & x), "5e") > 0 Then
Sheet1.Range("$T$" & x) = Sheet1.Range("$T$" & x) & "CAT 5E Ethernet Cables (Test)"
End If
Next
End Sub
Any help is appreciated. Thanks in advance!
Assuming you choose the route of using a data table sheet to compare to your string.
You would need to have a sheet looking like this (Maybe this is not what you want because I didn't thoroughly understand how your data looks like but the idea remains). You could have sub-category if you want, as well as category, in a third column.
column A | column B
keyword |category
CAT |ATX Cases
5e |Mini-ITX Cases
important words |MicroATX Cases
...
This would need to be filled manually. I'm not sure about the amount of data you're looking at. It can be pretty rapid if you can copy/paste stuff efficiently, depending on the form of your data.
When you have that, loop using this code. I assume the data table is in Sheet1, columns A and B and the values are in Sheet2, column A.
dim listLength as integer 'number of values to look at
dim i as integer
dim dataLength as integer 'number of keywords
dim j as integer
dim keyword as string
dim value as string
listlength = Sheet2.Cells(Rows.Count, "A").End(xlUp).Row - 1 'assuming you start on row 2
datalength = Sheet1.Cells(Rows.Count, "A").End(xlUp).Row - 1 'assuming you start on row 2
for i = 2 to listLength + 1
value = Sheet2.Range("A")(i)
for j = 2 to dataLength + 1
keyword = Sheet1.Range("A")(j)
if instr(value, keyword) <> 0 then
' what happens when the keyword is present goes here
end if
next j
next i
Related
hopefully someone will be able to help me. I need to write a query, which would shrink the data from multiple columns (in my case from columns A:H) into one column.
The original file looks like this:
I need to shrink the data one by one by rows. I mean, the query has to check the first row and take the data (name), and put it into "a new column" then check the second column and do the same, and continue like this one by one. The table has 170 rows.
I found a query that is shrinking the data from multiple columns into one column but in another order than I need. The query is taking as first all data from a column A and putting it into "a new column", then taking all data from a column B and putting it into "a new column" under the data from the previous column (column A).
This is the query I tried to apply:
Please could somebody help me with it? I have to admit that I have not use UBound and LBound functions and I am getting pretty lost here. :(
I will be thankful for any advise how to adjust this query.
Many thanks in advance! :)
Try this. I'm first setting your range to an array. I then loop through the array and 'slice' each row using Application.Index. It then Joins all the content in that row together before Trimming the whitespace left over from either end. This leaves me with the one value in my results array (tmp). The code then clears your source data before leaving all your data in one column.
Sub CombineColumns()
Dim rng As Range
Dim tmp As Variant, vaCells As Variant
Dim i As Long
Set rng = Sheets("DATA").Range("A2:H200")
vaCells = rng.Value2
ReDim tmp(LBound(vaCells) To UBound(vaCells))
For i = LBound(tmp) To UBound(tmp)
tmp(i) = Trim(Join(Application.Index(vaCells, i, 0)))
Next i
With rng
.ClearContents
.Cells(1).Resize(UBound(tmp)).Value2 = Application.Transpose(tmp)
End With
End Sub
LBound returns the lowest position in the array (usually 0 or 1) and UBound returns the highest
I think something like this
for i = 1 to 170
for y = 1 to 8
if worksheets("trainers").cells(i,y).value <> "" then
worksheets("output").cells(i,1).value = worksheets("trainers").cells(i,y).value
exit for
end if
next y
next i
or on same sheet
For i = 1 To 170
Z = 0
For y = 1 To 8
If Cells(i, y).Value = "" Then
Cells(i, y).Delete Shift:=xlToLeft
Z = Z + 1
If Z <= 8 Then y = y - 1
End If
Next y
Next i
My research shows that I need to use Visual Basic. I am a programmer/developer, but have never used VB so if anyone could dumb it down it would be appreciated.
Here's my working excel function:
=IF(MATCH(1,E1:DP1,0),D1,FALSE)
I want to loop a few of those numbers such that:
=IF(MATCH(141,E1:DP378,0),D378,FALSE)
THEN take my answers (which will be strings, because column D are all strings, the rest of the excel file are numbers)
=CONCAT
end goal: have 141 String arrays populated based on the data in my table.
I went ahead and made my first attempt at VBA like this:
Sub myFunc()
'Initialize Variables
Dim strings As Range, nums As Integer, answer() As Variant, listAnswers() As Variant
'set variables
strings = ("C1:C378")
nums = 141
i = 0
j = 0
ReDim Preserve answer(i)
ReDim Preserve listAnswers(j)
'answer() = {""}
'for each in nums
For counter = 0 To nums
ReDim Preserve listAnswers(0 To j)
'set each list of answers
listAnswers(i) = Join(answer(), "insertJSONcode")
j = j + 1
'for each in Stings
For Each cell In strings
If cell <> "" Then
ReDim Preserve answer(0 To i)
answer(i) = 'essentially this: (MATCH(2,E1:DP1,0),D1,FALSE)
i = i + 1
end If
next cell 'end embedded forEach
Next LCounter 'end for loop
'is this possible? or wrong syntax?
Range("A:A").Value = listAnswers() ' should print 141 arrays from A1 to A141
End Sub
EDIT:
Important note I do NOT need to call the sheet by Name. I've successfully written integer values to by excel sheet in column A without doing so.
Also, the VBA I wrote I was never intended to work, I know it's broken at least where answer(i) is supposed to write to something. I'm only putting that code there to show I was able to at least able to get into spitting distance of the proper logic and prove I've put some serious effort into solving the problem and give a rough starting point.
Here's an image of the excel format. Column C goes down to 378 and the numbers listed from E through DP are populated by a database. It consists of blank cells and numbers between 1 and 141.
Looking back at my if statement:
=IF(MATCH(2,E2:DP2,0),D2,FALSE)
If I were to type that exactly into cell B2 it would output the correct answer "text2". which is neat and all, but I need every instance of text 2 written out, then CONCAT those results. Easy so far, I could drag that down all the way through column B and have all of my "text" strings in one column, CONCAT that column and there's the answer. However I don't just need #2, I need each number between 1 and 141. Plus I want to avoid writing 141 columns with a CONCAT on top of each one.
I'm looking for an alternative to this code, but using numbers.
I want to select 5 columns, the start column is a variable, and then it selects 5 columns from this.
Columns("A:E").Select
How do I use integers instead, to reference columns? Something like below?
For n = 1 to 5
Columns("n : n + 4") .select
do sth
next n
You can use resize like this:
For n = 1 To 5
Columns(n).Resize(, 5).Select
'~~> rest of your code
Next
In any Range Manipulation that you do, always keep at the back of your mind Resize and Offset property.
Columns("A:E").Select
Can be directly replaced by
Columns(1).Resize(, 5).EntireColumn.Select
Where 1 can be replaced by a variable
n = 5
Columns(n).Resize(, n+4).EntireColumn.Select
In my opinion you are best dealing with a block of columns rather than looping through columns n to n + 4 as it is more efficient.
In addition, using select will slow your code down. So instead of selecting your columns and then performing an action on the selection try instead to perform the action directly. Below is an example to change the colour of columns A-E to yellow.
Columns(1).Resize(, 5).EntireColumn.Interior.Color = 65535
you can use range with cells to get the effect you want (but it would be better not to use select if you don't have to)
For n = 1 to 5
range(cells(1,n).entirecolumn,cells(1,n+4).entirecolumn).Select
do sth
next n
Try using the following, where n is your variable and x is your offset (4 in this case):
LEFT(ADDRESS(1,n+x,4),1)
This will return the letter of that column (so for n=1 and x=4, it'll return A+4 = E). You can then use INDIRECT() to reference this, as so:
COLUMNS(INDIRECT(LEFT(ADDRESS(1,n,4),1)&":"&LEFT(ADDRESS(1,n+x,4),1)))
which with n=1, x=4 becomes:
COLUMNS(INDIRECT("A"&":"&"E"))
and so:
COLUMNS(A:E)
In the example code below I use variables just to show how the command could be used for other situations.
FirstCol = 1
LastCol = FirstCol + 5
Range(Columns(FirstCol), Columns(LastCol)).Select
no need for loops or such.. try this..
dim startColumnas integer
dim endColumn as integer
startColumn = 7
endColumn = 24
Range(Cells(, startColumn), Cells(, endColumn)).ColumnWidth = 3.8 ' <~~ whatever width you want to set..*
You can specify addresses as "R1C2" instead of "B2". Under File -> Options -> Formuals -> Workingg with Formulas there is a toggle R1C1 reference style. which can be set, as illustrated below.
I was looking for a similar thing.
My problem was to find the last column based on row 5 and then select 3 columns before including the last column.
Dim lColumn As Long
lColumn = ActiveSheet.Cells(5,Columns.Count).End(xlToLeft).Column
MsgBox ("The last used column is: " & lColumn)
Range(Columns(lColumn - 3), Columns(lColumn)).Select
Message box is optional as it is more of a control check. If you want to select the columns after the last column then you simply reverse the range selection
Dim lColumn As Long
lColumn = ActiveSheet.Cells(5,Columns.Count).End(xlToLeft).Column
MsgBox ("The last used column is: " & lColumn)
Range(Columns(lColumn), Columns(lColumn + 3)).Select
In this way, you can start to select data even behind column "Z" and select a lot of columns.
Sub SelectColumNums()
Dim xCol1 As Integer, xNumOfCols as integer
xCol1 = 26
xNumOfCols = 17
Range(Columns(xCol1), Columns(xCol1 + xNumOfCols)).Select
End Sub
I have an excel file which has column B1 to B500 (may vary) filled with numbers. For example:
I need the output to be like:
I have this much code till now:
Sub Max()
Dim i As Long, j As Long
Dim cl As Excel.Range
i = 1
j = 1
For i = sheet.UsedRange.Rows.Count To 1 Step -1
cl = sheet.Cells(i, 2) '## Examine the cell in Column B
If xl.WorksheetFunction.CountIf(sheet.Range("B:B"), cl.Value) > 1 Then
cl.Value = sheet.Cells(j, 3).value 'copy to Column C
End If
j = j + 1
Next i
End Sub
What this code does is to find duplicates in column B and remove other entries from the column. Nothing gets written in column C. I want the column B to be unedited at the end. Also cannot figure out how to achieve the sorting here.
Please help.
Well, you could use formulas if you want too:
It is very important to use array formulas (Ctrl+Shift+Enter when done editing the cell), my Excel is an Spanish Version, so you just need to change:
- SI by IF
- CONTAR.SI by COUNT.IF
I came up with this solution thinking about the bubble sort algorithm. I hope this will be useful for you.
I have a file that I only want to extract cells B9, B19, B29, etc etc etc in a pattern throughout the entire file. I would preferably like it to be extracted to a different excel file or someway so that I can do stuff with only those cells in another excel worksheet.
Potentially, I may have several excel files that I may need to do this sort of thing so if there were a way where I had the same format throughout a lot of files that I could always extract cells B9, B19, B29 that would be great. any help appreciated
I looking for syntax if possible
EDIT
Was thinking if I could somehow make an excel IF statement saying if Row has a 9 in it and the row is B then print it somewhere but I want it printed in a column
EDIT 2
I just want column B not A like I mentioned before.
B9, B19,B29,B39 through the whole file
Just in case you want to do it with code:
Sub Test()
'Assumes Sheet1 has your values and Sheet2 will be the data extracted from every row ending in 9
Dim iCounter As Long
Dim newSheetRow As Long
Dim aValue As String
Dim bValue As String
newSheetRow = 1
'Start and nine and increment by 10 till you reach end of sheet
For iCounter = 9 To Sheet1.Rows.Count - 1 Step 10 'NOTE: You may not want to do it by RowCount, but just showing you could
aValue = Sheet1.Range("A" & iCounter)
bValue = Sheet1.Range("B" & iCounter)
Sheet2.Range("A" & newSheetRow).Value = "We were on row: " & iCounter
Sheet2.Range("B" & newSheetRow).Value = aValue
Sheet2.Range("C" & newSheetRow).Value = bValue
newSheetRow = newSheetRow + 1
Next iCounter
MsgBox "Done"
End Sub
You could use the INDIRECT function. It takes a cell reference as a text string and returns the value in that cell. So instead of using
=data!a9
to get the value in sheet "data" in cell a9, you use
=indirect("data!a9")
You can also use r1c1 notation, like this:
=indirect("data!r9c1",false)
From there you can use the ROW and COLUMN functions to go in steps of 10:
=INDIRECT("data!r"&-1+10*ROW()&"c"&COLUMN(),FALSE)
If you put this formula in A1 of your output sheet and then copy and paste it down and across, it will give you the values in data!A9, data!A19, data!A29,... in cells A1, A2, A3... Depending on how you want your output arranged, you might have to modify the cell reference string.
Depending on how often you want to do this depends on how you need to do it, if it's a one of them some simple excel commands might help.
e.g.
In Cell C1 put the following:
=MOD(ROW(),10)
then replicate this down to the bottom of your data. the command will return the numbers 1 through to 0. You can then filter the data on column C where value is 9 then select the visible rows and copy the data to a new sheet.
ROW() ' this returns the ROW number of cell the command is in.
MOD(number, divisor) ' this basically divides one number by the other and returns the remainder. so row 9 / 10 = 0 remainder of 9, row 19 / 10 = 1 remainder of 9.
Hope this helps.