Pulling my hair out here. Yesterday I set up an SSL Certificate in IIS10. This is the process I followed:
In IIS, under Server Certificates complete Create Certificate Request (generated server.csr & server.key)
Go to sslforfree.com and start "create certificate" process.
Enter Static IP in Domain box
In Validity, choose paste Existing CSR (paste in contents of server.csr)
Select free 90 day certificate
Choose HTTP file upload and add auth file to virtual share in IIS.
Verified OK.
Download certificate
Back in IIS, select "Complete Certificate Request"
Browse to and select "certificate.crt" file.
Give it a friendly name etc, and save.
Browse to website under sites in IIS, and select Bindings. Choose the IP of the server, the incoming Port, and the newly imported SSL certificate.
Back in sslforfree, check the installation.
Everything all good
So everything was working beautifully, could see the certificate in the browser etc, job done.
Now come to today, and the server is actively refusing requests. Go back to check the installation of my SSL on sslforfree, and it's no longer found. Tried removing and re-adding, but nothing I do seems to get the SSL to be visible.
It's not that the certificate is refused, the browser doesn't even think it's there. Why would IIS suddenly stop sharing the certificate? I am totally stumped.
EDIT
As per the advice below, I set up a DNS name with CloudFlare and pointed it at my server.
I Set up the bindings in IIS to link to the new hostname and removed the old certificate (one for port 443 and this one for port 4443 which the API runs on):
Ports 80, 443 and 4443 are all port-forwarded on the router to my server:
I then downloaded Win-ACME and successfully created the Let's Encrypt certificate, and the renewal task created in Task Scheduler.
SSL Cert now shows in Bindings:
SSL Certificate appears to be all good:
...but when I go to the site, using the new domain name. Same problem... no certificate:
So I'm not sure what the problem is here...
This issue may happens when the imported cert does not have a private key associated. solution would be to import the .CER file to your system(from where certificate is requested) personel store and export it with private key. Then copy the .pfx file to required server and import it from server certificate option under IIS.
And you can refer to this link: The Whole Story of "Server Certificate Disappears in IIS 7/7.5/8/8.5/10.0 After Installing It! Why!".
Thanks to Lex Li, I was able to dig around with Jexus Manager, and IIS Crypto to work out what was wrong.
Seems having TLS 1.2 an TLS 1.3 enabled on my machine at the same time was causing issues. Discovered this using Postman and disabling certain TLS Protocols, eventually getting it to work.
For those of you who may experience similar issues, using this application and setting it to "Best Practices" after disabling TLS 1.3 in my Registry, I finally have it working, with a certificate.
So I am trying to make my IIS8 webserver https, yet I can't seem to get it to work.
I have tried almost anything... but nothing seems to work.
DON'T WORRY THE FILES BELOW ARE FAKE!
PICTURE 1 KEY
PICTURE 2 PEM
First of all, what do I need to do with these 2? It says to save them as .key and .pem files, so I thought they mend: put the private key in a text file and save it as .key and same for the certificate and save it as .pem.
I tried to convert them to .pfx because that is what I need, right?
First I tried using openssl, but I saw a nice site, so I started using that instead: https://www.sslshopper.com/ssl-converter.html. That gave me an error at first, but then I saw cloudflare also had something called DER:
Which gave me an .CRT file if I downloaded it, so now I had a .PEM, a .KEY and an .CRT file, I went back to the website and used the .CRT file and the .KEY file, and put in a password!
Now I've gotten my .PFX file, which I wanted! I installed it on my windows server, but got this:
Why is it not verified?!
What files do I need to verify this?
Am I saving the files correct?
Within IIS you'll need to create a Certificate Signing Request (CSR) and export it.
In the Crypto app, scroll down to the Origin Certificates card and click 'Create Certificate'. Select 'I have my own private key and CSR', add the hostnames you'd like to be covered by the certificate. Once you've completed all the steps in the Wizard you can go back to IIS and click " Complete Certificate Request".
A step-by-step breakdown of these instructions is available on the Cloudflare Knowledge Base: Managing Cloudflare Origin CA certificates
Additionally, you'll need to install the Origin CA root certificates for CloudFlare on the server outline in Step 4 of the KB tutorial. This is fix the warning message:
Windows does not have enough information to verify this certificate.
There are two locations which these certificates may be installed: Current User or Local Machine.
To target the Current User open the certmgr.msc program, otherwise open certlm.msc
Expand 'Trusted Root Certification Authorities'
Right-click 'Certificates'
Select 'Import...' from the 'All Tasks' menu
Import both the ECC and RSA .pem files
I am in a process of generating an SSL cert for a domain name.
What I have done:
Went to the IIS management > Server Certificates and clicked on Create Request. This generated a *.com file with a hash inside it that I submitted to the GoDaddy.
From GoDaddy I got back a zip with two files: *.crt and *.p7b
I exported the certificate to a *.cer file and uploaded it to Azure, but when I try to deploy the cloud project I get an error:
Certificate with thumbprint associated with HTTPS input endpoint
does not contain private key
After reading similar issues on the Internet, I understand that my *.cer file doesnt contain the private key.
My problem is that no matter how I try to export it to a *.PFX, the PFX option is always disabled in the cert export wizard.
Also not sure if it is related, but when I Click on Complete Certificate Request in IIS and select the cert that I got from GoDaddy. I get an error:
Cannot find the certificate request that is associated with this
certificate file. A certificate request must be completed on the
computer where the request was created.
You will not have the option of exporting from IIS or exporting to PFX from Certificate Manager if you do not do the IIS "Create Certificate Request" and "Complete Certificate Request" from the same machine.
That was my problem. I did these two steps from two different machines.
I had to create a new request (in IIS), go to GoDaddy, rekey my certificate, download the new certificate, and then complete the request (in IIS).
This turned out to be something completely idiotic, as usual messed up by Microsoft.
The process of creating a cert for a domain is that you need to use [Create Certificate Request] in IIS.
Then send the created hash to the Authority and use the [Complete Certificate Request] in IIS where you provide the cert given to you by the Authority. This will install the cert into your local IIS
After the cert is installed you need to right click on it and do an export to a *.PFX file. The PFX file now can be uploaded to Azure or any other hosting...
The processes could have been very simple, if Microsoft didn't make sure to screw it up.
The thing is that when you click on [Complete Certificate Request], the file open dialog has a file type of *.CER, but this is wrong because you need to provide *.CRT!!! The solution is to change the file type select to All Files *.* and chose the *.CRT file provided by the Authority.
I created a WebService using WCF. I'm doing self hosting and I want to enable HTTPS. From my understanding for this to happen, I need to create a certificate and bind to the port that I want to use.
Here are the steps that I've done to handle this:
Created a Certificate on my local machine to act as the Root Certificate Authority
makecert -n "CN=My Root Certificate Authority" -r -sv RootCATest.pvk RootCATest.cer
Opened MMC.exe and imported the saved .cer file into the "Trusted Root Certificate\Certificates\ folder
makecert -sk MyKeyName -iv RootCATest.pvk -n "CN=MyMachineName" -ic RootCATest.cer -sr localmachine -ss my -sky exchange -pe MyMachineName.cer
Created a temporary service certificate from the signed Root Certificate Authority
makecert -sk MyKeyName -iv RootCATest.pvk -n "CN=MyMachineName" -ic RootCATest.cer -sr localmachine -ss my -sky exchange -pe MyMachineName.cer
Tried to Bind the Certificate to the Port number (443 in this case)
netsh http add sslcert ipport=0.0.0.0:443 certhash=2c5ba85bcbca412a74fece02878a44b285c63981 appid={646937c0-1042-4e81-a3b6-47d678d68ba9}
The result from step 4 is the following error:
SSL Certificate add failed, Error 1312
A specified logon session does not exist. It may already have been terminated.
Does anyone have a clue why I might be getting this error?
I had the same error. The first time it occurred, as Micheal said, I had to move the certificate under Certificates(Local Computer) -->Personal -->Certificate folder. I had the same error when I imported the same certificate on another machine. The reason was that I was using certmgr.msc to import the certificate. . The window opened thus shows “Certificates – Current User”. Certificates imported using this window cause netsh to fail with the 1312 error. Make sure to use certificate snap-in in MMC to import certificates. The certificate snap-in from MMC shows “Certificates (Local Computer)”. This lets the netsh execution sail through.
SSL Certificate add failed, Error 1312
A specified logon session does not exist. It may already have been terminated.
I used to have the exact same problem and spent a couple days trying to figure out what the reason was.
To make the long story short: the problem is that you have installed the certificate on the winrm server that does not have PRIVATE KEY.
I have checked this several times. You have to delete your certificate and rebuild it by using makecert for instance, as it is described perfectly here: http://blogs.technet.com/b/jhoward/archive/2005/02/02/365323.aspx
You can easily check if your certificate has private a key as so: mmc - certificates - local machine - personal. Look at the icon of the certificate - it MUST have key sign on the icon.
I have bought an official Thawte certificate to secure a self hosted (console application) web service over a specific port on our internet server.
I then have received the Thawte certificate and installed it with mmc on our Internet server (the certificate then was viewable under „Trusted Root Certification Authorities“ (with the key icon on the image, what shows that the certificate contains a private key what is mandatory to be able to bind it to a port b.t.w.) .
Next step was to enable the <port> for https:
netsh http add urlacl url=https://+:<port>/ user=everyone
(what was no problem)
Next step was to enable the port () for https:
netsh http add sslcert ipport=0.0.0.0:<port> certhash=<thumbprint to certificate> appid={<guid to application>}
This has failed with the error message:
SSL Certificate add failed, Error: 1312 A specified logon session does not exists. It may be already have been terminated.
I then have searched the Internet and tried various suggested workaround’s (without success).
The solution for my case was to add certstorename=Root to the netsh command:
netsh http add sslcert ipport=0.0.0.0:<port *1)> certstorename=Root certhash=<thumbprint to certificate *2)> appid={<guid to application *3)>}
Notes:
If no certstorename is applied to net netsh command, netsh takes the default, what is MY (what targets the certificate store: “Personal” where self signed certificates are stored normally).
Root targets the certificate store: „Trusted Root Certification Authorities“
*1): The port, you want to use the connection
*2): You can extract the thumbprint to the certificate, if you open the certificate (on a windows system, just doubleclick the certificate in explorer) - select tab “Details” and click on “Thumbprint”. The “thumbprint” then is showed and can be copied. Copy the Thumbprint and remove all spaces...
*3): As appid you can take any ID in the form {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} as the APPID is only informative.
With the command “netsh http show sslcert” you can query the bound certificates on the whole machine and the will see informative, which appid is bound to which certificate (not really helpful in practice b.t.w.)
In my case, I have took the (from VS generated) GUID to my web service application
I had been dealing with this issue and I'm using a self-hosted WCF service. I just made the breakthrough:
I had a certificate in the personnel folder for the Machine store. It expired and my manager issued a new one. The new one failed for me with this error. I tried a lot of stuff from Google but in the end, resolved the issue using a completely different solution.
I installed both certificates- the expired one and the newer one. Then I used this command to get a list of them:
certutil -store My
I get this output (info is fake and other certificate are not listed):
================ Certificate 1 ================
Serial Number: 6d
Issuer: E=operations#voicetrust.com, CN=VoiceTrust Server CA, OU=VoiceTrust Oper
ations, O=VoiceTrust
NotBefore: 03-Jan-2013 3:33 PM
NotAfter: 03-Mar-2013 3:33 PM
Subject: E=hgulzar#voicetrust.com, CN=hornet.voicetrust.com, OU=Software Develop
ment, O=VoiceTrust eServices MENA FZ LLC, L=Dubai, C=AE
Non-root Certificate
Cert Hash(sha1): 98 5f a0 d3 11 6a 4b 64 3b db 0a a4 11 66 fc 08 28 74 7e 53
Key Container = {E5BC0912-7808-4B89-B457-31946DE5990E}
Unique container name: dfedfcc149408fb990a3bacd6d31126b_3277b2c9-9894-46d0-9b6
4-30f0d6589239
Provider = Microsoft Enhanced Cryptographic Provider v1.0
Private key is NOT exportable
Encryption test passed
================ Certificate 2 ================
Serial Number: 6d
Issuer: E=operations#voicetrust.com, CN=VoiceTrust Server CA, OU=VoiceTrust Oper
ations, O=VoiceTrust
NotBefore: 03-Nov-2013 3:33 PM
NotAfter: 03-Dec-2013 3:33 PM
Subject: E=hgulzar#voicetrust.com, CN=hornet.voicetrust.com, OU=Software Develop
ment, O=VoiceTrust eServices MENA FZ LLC, L=Dubai, C=AE
Non-root Certificate
Cert Hash(sha1): 30 5f a0 d3 11 6a 4b 64 3b db 0a a4 11 66 fc 08 28 74 7e 53
Key Container = {E5BC0912-7808-4B89-B457-31946DE5960E}
*Unique container name:* 55edfcc149408fb990a3bacd6d31126b_3277b2c9-9894-46d0-9b6
4-30f0d6589239
Provider = Microsoft Enhanced Cryptographic Provider v1.0
Private key is NOT exportable
Encryption test passed
Now, everything seems OK but certificate 1 is expired and works if I try to bind it to a port whereas Certificate 2 fails with Error 1312.
The key difference that baffled me was the Unique container name property. It should be representing a physical key file on the hard drive in the %ProgramData%\Microsoft\Crypto\RSA\MachineKeys\
For Certificate 1, the file was there but for Certificate 2, there was no such file. After searching I found the file against Certificate 2 in the sub folder of %AppData%\Microsoft\Crypto\ folder. That's user specific keys not Machine level keys. It's amazing that the certificate is being imported into Computer store yet it always keeps the container key of User's store.
I deleted the '55edfcc149408fb990a3bacd6d31126b_3277b2c9-9894-46d0-9b64-30f0d6589239' file under the AppData folder and ran the repair command for my certificate 2 on the store:
certutil -repairstore My 2
This time, the Unique container name was reflecting a file in the proper folder under '%ProgramData%\Microsoft\Crypto\' and everything started working.
Hope this is helpful to someone.
I've been fighting error 1312 all day, what fixed it for me was to import the certificate in mmc as a .p12 file instead of a .crt. If you are creating it with OpenSSL then once you have created the .crt, do:
pkcs12 -export -in server.crt -inkey server.key -name “Your Name” -out server.p12
As described. When you go to import it in mmc it will be a called "Personal Information Exchange" file (and apparently a .pfx file would also work).
I'm new to writing servers and dealing with SSL and I have no idea why this works, but I hope it helps.
The problem was in step 4. I was using the Thumbprint from the Root Certificate for the value in certhash. To solve this I had to go back to the MMC and refresh the Certificates(Local Computer) -->Personal -->Certificate folder. Then use the Thumbprint from the certificate that is "Issued By" the Root Certificate Authority.
I my case the problem was that the CER file hasn't private key attached.
I've attached PK using those OpenSSL commands:
openssl x509 -in server.der -inform DER -out server.pem -outform PEM
openssl pkcs12 -export -in server.pem -inkey serverkey.pem -out server.p12
Works for CER/DER files.
I had the same problem and solved importing the certificate using this command:
c:> certutil -importPFX certname.pfx
Now the certificate appear using this command:
c:> certutil -store my
before this command the certificate doesn't appear
This might seem obvious; however, I think it can save someone some time of head scratching. I had imported a file with .cer extension under my Personal certificates folder (for the Personal Computer account). After a while, I realized that I needed to import the file with the *.pfx extension instead. Fixed that and voilà! Problem solved!
There are multiple ways of receiving this error (see above for other answers).
Another way to receive this specific error is to attempt to bind a certificate to a port when the certificate is not in the appropriate store.
Verify that the certificate is stored in the localMachine Root store (you can use certutil or certmgr.exe from command line to dump it correctly).
updated grammar :)
If anyone else runs into this problem and the answers in here do not clearly answer it, the underlying core problem is the private key needs to be imported. If you do not mark the certificate as exportable when you import it, the private key is not imported and you cannot bind it. If you delete it and re-import it and mark it as exportable, then it will work.
It also needs to be the local machine store as others have pointed out.
If:
you didn't have IIS on your machine (working with self-hosted WCF let's say), and
you made your cert request on another machine using IIS Manager (because you didn't understand that the private key comes from ciphers embedded in the cert request - and later the issued .pb7)
then:
just go install the .pb7 on the IIS machine you used to make the cert request (local machine/personal/certificates - using mmc);
export the cert from that machine, including its private key (assign password); and
install it using mmc on the WCF server (local machine/personal/certificates - using mmc).
Then, netsh will let you bind to port 443. No more 1312 errors.
Just to throw yet another answer into the ring, this is the problem I had:
Although I imported my certificate into the (Local Computer)\... certificate store, I had imported it into the Trusted Root Certification Authorities section. I needed to import it into the Personal section, otherwise this error occurred.
In my case, i have missing the certificate private key.
IF you imported the certificate using .NET, specific import flags must be used:
/// <summary>
/// Imports X.509 certificate from file to certificate store.
/// </summary>
/// <param name="fileName">Certificate file.</param>
/// <param name="password">Password.</param>
/// <param name="storeName">Store name.</param>
/// <param name="storeLocation">Store location.</param>
public static void ImportCertificate(string fileName, string password, StoreName storeName, StoreLocation storeLocation) {
var keyStorageFlags =
X509KeyStorageFlags.PersistKeySet
| (storeLocation == StoreLocation.LocalMachine ? X509KeyStorageFlags.MachineKeySet : X509KeyStorageFlags.UserKeySet);
var cert = new X509Certificate2(fileName, password, keyStorageFlags);
var store = new X509Store(storeName, storeLocation);
store.Open(OpenFlags.MaxAllowed);
store.Add(cert);
store.Close();
}
The ImportCertificate method is a part of the Woof.Security package created by me.
https://github.com/HTD/Woof.Security
https://www.nuget.org/packages/Woof.Security/
This is my summary of all the fixes in this thread and how it worked for me:
Find "Windows PowerShell", right-click on the icon, and choose "run as administrator".
Find "Wordpad", right-click on the icon, and choose "run as administrator". (this is so you can copy and paste between PowerShell and Wordpad.)
In PowerShell run "netsh HTTP show sslcert".
From the info that shows, copy the "Certificate Hash", "Application Id", and "Certificate Store Name". (You'll need all these in a moment.)
(If you need to) locate your *.cer or *.crt file and export it as a *.pfx file.
In Powershell, navigate to the folder of your *.pfx file.
Now run "certutil -importPFX .pfx".
Then run "certutil -store my" to show the installed certs.
Now using the info from step #4 run this "netsh http add sslcert ipport=0.0.0.0:8000 certstorename= certhash= appid='' (I had to put them in this order, with my cert store name, and single quotes around the app id.)
Check that the SSL cert was added by running "netsh HTTP show sslcert" again.
I had exact same problem eventhough my .pfx file had private key. Adding of certificate with MMC console was successful, but adding programatically using .Net X509Store.Add(X509Certificate2) method failed every time with error 1312. Certificate even had a key sign on the icon.
After several days finaly decided to make new certificate using makecert.exe as suggested in posts here. After that everything was fine. Key appeared in %ProgramData%\Microsoft\Crypto\RSA\MachineKeys. For some reason my earlier pfx file was not compatible.
In my experience, as long as your key in not appearing in %ProgramData%\Microsoft\Crypto\RSA\MachineKeys\, binding with 'netsh http add sslcert ....' will fail.
The certstorename argument should be the string value of the StoreName enumeration from the .net framework namespace System.Security.Cryptography.X509Certificates.
I've being working on this for hours, and basically read through what #DoomerDGR8 said above, but my fix was a lot more simple. I ran
C:\Windows\system32> certutil -store TRUSTEDPUBLISHER
This listed several certificates I have installed, I then ran repair store on the certificate that I was having a problem installing with netsh.
C:\Windows\system32> certutil -repairstore TRUSTEDPUBLISHER 6
The number 6 at the end represents the index of your certificate, found at in the store, hope this helps
In my case while creating the certificate I chose a different name than My for my Cert Store name. The default name is MY. So if yours is different append certstorename=Your provided store name to the command.
I had the same error when creating self signed certificate with OpenSSL(BouncyCastle) I resolved it with help from this post:
Cannot export generated certificate with private key to byte array in .net 4.0/4.5
I had to add:
RsaPrivateKeyStructure rsa = RsaPrivateKeyStructure.GetInstance(seq); //new RsaPrivateKeyStructure(seq);
RsaPrivateCrtKeyParameters rsaparams = new RsaPrivateCrtKeyParameters(
rsa.Modulus, rsa.PublicExponent, rsa.PrivateExponent, rsa.Prime1, rsa.Prime2, rsa.Exponent1, rsa.Exponent2, rsa.Coefficient);
var rsaPriv = DotNetUtilities.ToRSA(rsaparams);
var cspParams = new CspParameters
{
KeyContainerName = Guid.NewGuid().ToString(),
KeyNumber = (int)KeyNumber.Exchange,
Flags = CspProviderFlags.UseMachineKeyStore
};
var rsaPrivate = new RSACryptoServiceProvider(cspParams);**
// Import private key from BouncyCastle's rsa
rsaPrivate.ImportParameters(rsaPriv.ExportParameters(true));
// Set private key on our X509Certificate2
x509.PrivateKey = rsaPrivate;
So to add (yet) fix/situation.
I had C# code that used BouncyCastle to create self-signed certificates.
<packages>
<package id="BouncyCastle" version="1.8.1" targetFramework="net45" />
So my code created the certificates AND placed them in the correct locations in the Cert-Store.
Using the hints here, my install of On Premise Service Bus 1.1 was failing...and that led me here.
I ended up DELETING both certificates my BouncyCastle code had created (from the cert store) and reimporting them (with private keys)....and it all worked.
I imported FIRST to the
Certificates (Local Computer) / Personal / Certificates
then I copied pasted (in the mmc) to any other places (stores) I needed them.
My "before" and "after" looked exactly the same from my eyes in MMC, BUT it fixed the issue. Go figure.
I just had yet another error. I renewed an expired cert for our WorkFolders service from our CA using the same private key. Then I always got Error 1312. Even if Certificate Management shows I have a private key.
I could only solve the problem by re-issuing a new certificate (without the renew option). Then it worked on the first try.
Maybe this will help someone who also tried the renew option.
For me the problem was solved by ensuring that the certificate hash I was using in my command line, corresponded to the certificate installed on my server:
netsh http add sslcert ipport=0.0.0.0:8081 certhash=1061a577f0cc1c428186000dc84f02a7111ca1b2 appid={GUID}
On my side, the files provided were a P7B file together with a bunch of cert files. After getting stuck, I asked for my colleague's help and he gave me an idea to import the certificates together with the private key via a PFX.
This article gave me the instruction to convert the P7B file into PFX. To summarize, you simply have to do the following:
Use openssl to convert the P7B file into PEM first
Convert the PEM file into PFX
You can now import the PFX file. Better to read the article I stated above because it has significant information to note.
Finally I solved it. The problem is the certificate file. I tested it other mac and failed it. Here is my solution.
Remove .cer file
Re-create certificate file.
If failed, also re-create CSR file.
Thank you.
Looks like this is a generic error. My fix is unlike all the rest.
Using Azure Devops for a deployment, the step IIS Web App Manage has the cert hash buried/hidden in IIS Bindings (which the only way to see the cert hash is to edit that specific piece), so you have to update the hash so it matches on the server you're deploying to. And voila, you're set.
I was getting this error when trying to deploy from an Azure Devops pipeline to a Windows Server box running IIS. The pipeline should deploy the site to IIS and then create an https binding where the existing certificate in the computer cert store was referenced by it's thumbprint. In the pipeline the thumbprint was meant to be drawn from variable group - however the correct variable group wasn't linked to the pipeline (and the variable name was wrong) - so it got nothing.
Basically the wrong thumbprint was being used to identify the cert, I suspect it wasn't giving a standard "can't find the SSL cert" message because I was attempting to find the cert with a null.