I tried to develop this stored procedure using a temp table but that wouldn't work so I switched to using a table variable. I need to execute an interim dynamic query into the table variable and then I use that table variable to execute the final query. The problem is that I receive an error "must declare scalar variable #clms". I assume that Exec doesn't have scope for the table variable?
DECLARE #qry nvarchar(4000)
DECLARE #clms TABLE (mastcatname nvarchar(50),engdtlbeta decimal (18,4))
SET #qry='INSERT INTO #clms
SELECT distinct replace(mastcatname, '' '', '''') as mastcatname,
engdtlbeta
FROM vw_Scorecard
WHERE empsurveyid=' + cAST(#EmpSurveyID AS nvarchar(10)) + '
AND UnitID IN (' + #UnitIDs + ')
ORDER BY engdtlbeta desc, MastCatName'
EXEC(#qry)
DECLARE #cols nvarchar(1000)
SELECT #cols=COALESCE (#cols + ',[' + mastcatname + ']', '[' + mastcatname + ']')
FROM #clms
SET #qry='SELECT UnitName ,
ParentName, ' + #cols + '
FROM (
SELECT UnitName,
ParentName,
ScoreAvg,
replace(mastcatname, '' '','''') as mastcatname
FROM vw_Scorecard
WHERE UnitID IN (' + #UnitIDs + ')
AND EmpSurveyID=' + cast(#EmpSurveyID as nvarchar(5)) + ' ) p
PIVOT
(SUM(ScoreAvg) FOR mastcatname in (' + #cols + ')) as pvt'
EXEC (#qry)
This is simple minimal example. You can use INSERT EXEC statement. The key is to have table variable declared inside and outside dynamic query. At the end of dynamic query just select from table variable and insert resultset into outside table variable:
DECLARE #t TABLE ( id INT )
DECLARE #q NVARCHAR(MAX) = 'declare #t table(id int)
insert into #t values(1),(2)
select * from #t'
INSERT INTO #t
EXEC(#q)
SELECT * FROM #t
I found this attempting to do basically the same thing. I altered my SQL, and yes, it works! But then I thought, this is overcomplicating things. Why declare the table variable, insert, then select all in the dynamic SQL? Why not just select...
DECLARE #t TABLE ( id INT )
DECLARE #q NVARCHAR(MAX) = 'select 1 union select 2'
INSERT INTO #t
EXEC(#q)
SELECT * FROM #t
Related
I have this stored procedure:
Declare #MarketID AS NVARCHAR(MAX) = '1.136529848';
Declare #UserID AS NVARCHAR(MAX) = '6a309d84-d1c6-434d-b9df-4f96a74da912';
DECLARE #colsSelect AS NVARCHAR(MAX);
DECLARE #colsTemp AS NVARCHAR(MAX);
DECLARE #query AS NVARCHAR(MAX);
SELECT
#colsSelect = STUFF((SELECT distinct ',' +
'''''' + ' as ' + QUOTENAME(name)
FROM RunnersInfoes AS t
WHERE marketID = #MarketID
FOR XML PATH(''), TYPE).value('.', 'NVARCHAR(MAX)') , 1, 1, '');
PRINT #colsSelect
SET #query= ';WITH cte AS
(
SELECT
id, ParentId, 0 AS Level, Share, AccountTypeName, FirstName
FROM
dbo.View_UserProfile
WHERE
View_UserProfile.id = ' + '''' + #UserID + '''' +'
UNION ALL
SELECT
t.id, t.ParentId, Level + 1 AS Level, t.Share, t.AccountTypeName, t.FirstName
FROM
View_UserProfile t
INNER JOIN
cte ON t.ParentId = cte.id
)
SELECT
ID, AccountTypeName AS Type, FirstName AS Name, ' + #colsSelect + '
FROM cte AS t'
EXECUTE (#query)
and it's generating this result:
I want to create temp table or variable type table for following result , remember the column of this result are dynamically rendered. Sometimes result returns more columns and sometimes with less but first 3 columns remain the same for every result. So kindly help for creating dynamic table inside the stored procedure.
You can do:
SELECT ID
, AccountTypeName AS Type
, FirstName AS Name
, ' + #colsSelect + '
INTO ##TEMPTABLE
FROM cte AS t
Since you execute this dynamically, you cannot use #TEMPTABLE because a local temp table will only exist in the scope of the query that defines it. Using ## creates a global temp table which will be accessible outside the scope of the dynamic query.
Please use the SELECT - INTO clause for your use case as given below
SELECT * INTO #temptable FROM cte
To create a temp table that is filled by a dynamic query, use global temp tables like this example.
For the select ... into ... statement to work, you need to make sure every column from the select has a name.
declare #query varchar(1000) = 'select 1 as ID, ''test'' as Column_1 into ##mytable'
exec (#Query)
select * from ##mytable
drop table ##mytable
Do not forget to drop the temp table when your done.
I have the following Sql Server 2016 SELECT statement that returns only 1 row:
SELECT TOP 1 * FROM tempdb.dbo.IMTD
How can I concatenate the values as a comma delimited string? NOTE: the column names of this temporary table are unknown as they can variate.
Thank you.
Something like this perhaps:
-- Sample data
DECLARE #someTable TABLE (SomeID int identity, SomeTxt varchar(100));
INSERT #someTable VALUES ('row1'),('row2'),('row3');
-- Solution
SELECT ConcatinatedString =
STUFF
((
SELECT ','+SomeTxt
FROM #someTable
FOR XML PATH(''), TYPE
).value('.','varchar(100)'),1,1,'');
You can use Dynamic query as below:
DECLARE #COLS VARCHAR(MAX) = ''
SELECT #COLS = #COLS + ',' + COLUMN_NAME
FROM tempdb.INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME LIKE '#table[_]%' -- Dynamic Table (here, Temporary table)
DECLARE #COLNAMES VARCHAR(MAX) = REPLACE(STUFF(#COLS, 1, 1, ''), ',', '+ '','' +')
Declare #cmd varchar(max) = 'Select ' + #COLNAMES + ' as CSVCol from #table'
-- will generate
-- Select Column1+ ',' +Column2+ ',' +Column3 as CSVCol from #table
EXEC (#cmd)
Another solution you can try is this.
SELECT LTRIM(RTRIM(<ColumnName1>)) + ',',
LTRIM(RTRIM(<ColumnName2>)) + ',',
...
LTRIM(RTRIM(<ColumnNamen>)) + ','
FROM tempdb.dbo.IMTD
If you only want one row keep that top 1 In there like
SELECT TOP 1
LTRIM(RTRIM(<ColumnName1>)) + ',',
LTRIM(RTRIM(<ColumnName2>)) + ',',
...
LTRIM(RTRIM(<ColumnNamen>)) + ','
FROM tempdb.dbo.IMTD
The LTRIM and RTRIM will remove any white space and this should allow you to copy and paste the result set anywhere you may need it. You will need to do this for each columnname.
You can use the query below to get the column names from your temp table.
DECLARE #ColumnNames NVARCHAR(MAX)
SELECT
#ColumnNames= COALESCE(#ColumnNames +',','')+COLUMN_NAME
FROM
TempDB.INFORMATION_SCHEMA.COLUMNS
WHERE
TABLE_NAME = '#TempTableName'
I need to store dynamic sql result into a temporary table #Temp.
Dynamic SQL Query result is from a pivot result, so number of columns varies(Not fixed).
SET #Sql = N'SELECT ' + #Cols + ' FROM
(
SELECT ResourceKey, ResourceValue
FROM LocaleStringResources where StateId ='
+ LTRIM(RTRIM(#StateID)) + ' AND FormId =' + LTRIM(RTRIM(#FormID))
+ ' AND CultureCode =''' + LTRIM(RTRIM(#CultureCode)) + '''
) x
pivot
(
max(ResourceValue)
for ResourceKey IN (' + #Cols + ')
) p ;'
--#Cols => Column Names which varies in number
Now I have to insert dynamic sql result to #Temp Table and use this #Temp Table with another existing table to perform joins or something else.
(#Temp table should exist there to perform operations with other existing tables)
How can I Insert dynamic SQL query result To a Temporary table?
Thanks
Can you please try the below query.
SET #Sql = N'SELECT ' + #Cols + '
into ##TempTable
FROM
(
SELECT ResourceKey, ResourceValue
FROM LocaleStringResources where StateId ='
+ LTRIM(RTRIM(#StateID)) + ' AND FormId =' + LTRIM(RTRIM(#FormID))
+ ' AND CultureCode =''' + LTRIM(RTRIM(#CultureCode)) + '''
) x
pivot
(
max(ResourceValue)
for ResourceKey IN (' + #Cols + ')
) p ;'
You can then use the ##TempTable for further operations.
However, do not forget to drop the ##TempTable at the end of your query as it will give you error if you run the query again as it is a Global Temporary Table
As was answered in (https://social.msdn.microsoft.com/Forums/sqlserver/en-US/144f0812-b3a2-4197-91bc-f1515e7de4b9/not-able-to-create-hash-table-inside-stored-proc-through-execute-spexecutesql-strquery?forum=sqldatabaseengine),
you need to create a #Temp table in advance:
CREATE TABLE #Temp(columns definition);
It seems that the task is impossible, if you know nothing about the dynamic list of columns in advance. But, most likely you do know something.
You do know the types of dynamic columns, because they come from PIVOT. Most likely, you know the maximum possible number of dynamic columns. Even if you don't, SQL Server has a limit of 1024 columns per (nonwide) table and there is a limit of 8060 bytes per row (http://msdn.microsoft.com/en-us/library/ms143432.aspx). So, you can create a #Temp table in advance with maximum possible number of columns and use only some of them (make all your columns NULLable).
So, CREATE TABLE will look like this (instead of int use your type):
CREATE TABLE #Temp(c1 int NULL, c2 int NULL, c3 int NULL, ..., c1024 int NULL);
Yes, column names in #Temp will not be the same as in #Cols. It should be OK for your processing.
You have a list of columns in your #Cols variable. You somehow make this list of columns in some external code, so when #Cols is generated you know how many columns there are. At this moment you should be able to generate a second list of columns that matches the definition of #Temp. Something like:
#TempCols = N'c1, c2, c3, c4, c5';
The number of columns in #TempCols should be the same as the number of columns in #Cols. Then your dynamic SQL would look like this (I have added INSERT INTO #Temp (#TempCols) in front of your code):
SET #Sql = N'INSERT INTO #Temp (' + #TempCols + N') SELECT ' + #Cols + N' FROM
(
SELECT ResourceKey, ResourceValue
FROM LocaleStringResources where StateId ='
+ LTRIM(RTRIM(#StateID)) + ' AND FormId =' + LTRIM(RTRIM(#FormID))
+ ' AND CultureCode =''' + LTRIM(RTRIM(#CultureCode)) + '''
) x
pivot
(
max(ResourceValue)
for ResourceKey IN (' + #Cols + ')
) p ;'
Then you execute your dynamic SQL:
EXEC (#Sql) OR sp_executesql #Sql
And then do other processing using the #Temp table and temp column names c1, c2, c3, ...
MSDN says:
A local temporary table created in a stored procedure is dropped
automatically when the stored procedure is finished.
You can also DROP the #Temp table explicitly, like this:
IF OBJECT_ID('tempdb..#Temp') IS NOT NULL
DROP TABLE #Temp'
All this T-SQL code (CREATE TABLE, EXEC, ...your custom processing..., DROP TABLE) would naturally be inside the stored procedure.
Alternative to create a temporary table is to use the subquery
select t1.name,t1.lastname from(select * from table)t1.
where "select * from table" is your dyanmic query. which will return result which you can use as temp table t1 as given in example .
IF OBJECT_ID('tempdb..##TmepTable') IS NOT NULL DROP TABLE ##TmepTable
CREATE TABLE ##TmepTable (TmpCol CHAR(1))
DECLARE #SQL NVARCHAR(max) =' IF OBJECT_ID(''tempdb..##TmepTable'') IS NOT
NULL DROP TABLE ##TmepTable
SELECT * INTO ##TmepTable from [MyTableName]'
EXEC sp_executesql #SQL
SELECT Alias.* FROM ##TmepTable as Alias
IF OBJECT_ID('tempdb..##TmepTable') IS NOT NULL DROP TABLE ##TmepTable
Here is step by step solution for your problem.
Check for your temporary tables if they exist, and delete them.
IF OBJECT_ID('tempdb..#temp') IS NOT NULL
DROP TABLE #temp
IF OBJECT_ID('tempdb..##abc') IS NOT NULL
DROP TABLE ##abc
Store your main query result in first temp table (this step is for simplicity and more readability).
SELECT *
INTO #temp
FROM (SELECT ResourceKey, ResourceValue
FROM LocaleStringResources
where StateId ='+ LTRIM(RTRIM(#StateID)) + ' AND FormId =' + LTRIM(RTRIM(#FormID))
+ ' AND CultureCode =' + LTRIM(RTRIM(#CultureCode)) + ') AS S
Write below query to create your pivot and store result in another temp table.
DECLARE #str NVARCHAR(1000)
DECLARE #sql NVARCHAR(1000)
SELECT #str = COALESCE(#str+',', '') + ResourceKey FROM #temp
SET #sql = N'select * into ##abc from (select ' + #str + ' from (SELECT ResourceKey, ResourceValue FROM #temp) as A
Pivot
(
max(ResourceValue)
for ResourceKey in (' + #str + ')
)as pvt) as B'
Execute below query to get the pivot result in your next temp table ##abc.
EXECUTE sp_executesql #sql
And now you can use ##abc as table where-ever you want like
select * from ##abc
Hope this will help you.
I want to write query in which name table will dynamicaly compute. I have code like this below. What should I put in 'magic code' region?
DECLARE #myTableName nvarchar(100) = 'sch'
+ CAST(#nowYear as VARCHAR(5))
+ 'Q'
+ CAST(#nowQuarter as VARCHAR(3))
+ '.[tVisits]'
-- magic code --
myTable = DoSomething(#aktTableName)
-- magic code --
SELECT * FROM myTable
I use MS SQL Server 2012
You need use the dynamic SQL -
DECLARE
#nowYear INT = 2013
, #nowQuarter INT = 1
DECLARE #myTableName NVARCHAR(100) = '[sch'
+ CAST(#nowYear AS VARCHAR(5))
+ 'Q'
+ CAST(#nowQuarter AS VARCHAR(3))
+ '].[tVisits]'
DECLARE #SQL NVARCHAR(MAX) = N'SELECT * FROM ' + #myTableName
EXEC sys.sp_executesql #SQL
Instead of SELECT * FROM myTable
You need to do something like
DECLARE #sql nvarchar(4000)
SELECT #sql = ' SELECT * FROM ' + #myTable -- #myTable is a string containing qualified table name
EXEC sp_executesql #sql
Note that sp_executesql allows for a parameterized query - check its documentation
I am writing a query to pivoting table elements where column name is generated dynamically.
SET #query = N'SELECT STUDENT_ID, ROLL_NO, TITLE, STUDENT_NAME, EXAM_NAME, '+
#cols +
' INTO ##FINAL
FROM
(
SELECT *
FROM #AVERAGES
UNION
SELECT *
FROM #MARKS
UNION
SELECT *
FROM #GRACEMARKS
UNION
SELECT *
FROM #TOTAL
) p
PIVOT
(
MAX([MARKS])
FOR SUBJECT_ID IN
( '+
#cols +' )
) AS FINAL
ORDER BY STUDENT_ID ASC, DISPLAYORDER ASC, EXAM_NAME ASC;'
EXECUTE(#query)
select * from ##FINAL
This query works properly in my local database, but it doesn't work in SQL Azure since global temp tables are not allowed there.
Now if i change ##FINAL to #FINAL in my local database, but it gives me error as
Invalid object name '#FINAL' .
How can I resolve this issue?
Okay, after saying I didn't think it could be done, I might have a way. It's ugly though. Hopefully, you can play with the below sample and adapt it to your query (without having your schema and data, it's too tricky for me to attempt to write it):
declare #cols varchar(max)
set #cols = 'object_id,schema_id,parent_object_id'
--Create a temp table with the known columns
create table #Boris (
ID int IDENTITY(1,1) not null
)
--Alter the temp table to add the varying columns. Thankfully, they're all ints.
--for unknown types, varchar(max) may be more appropriate, and will hopefully convert
declare #tempcols varchar(max)
set #tempcols = #cols
while LEN(#tempcols) > 0
begin
declare #col varchar(max)
set #col = CASE WHEN CHARINDEX(',',#tempcols) > 0 THEN SUBSTRING(#tempcols,1,CHARINDEX(',',#tempcols)-1) ELSE #tempcols END
set #tempcols = CASE WHEN LEN(#col) = LEN(#tempcols) THEN '' ELSE SUBSTRING(#tempcols,LEN(#col)+2,10000000) END
declare #sql1 varchar(max)
set #sql1 = 'alter table #Boris add [' + #col + '] int null'
exec (#sql1)
end
declare #sql varchar(max)
set #sql = 'insert into #Boris (' + #cols + ') select ' + #cols + ' from sys.objects'
exec (#sql)
select * from #Boris
drop table #Boris
They key is to create the temp table in the outer scope, and then inner scopes (code running within EXEC statements) have access to the same temp table. The above worked on SQL Server 2008, but I don't have an Azure instance to play with, so not tested there.
If you create a temp table, it's visible from dynamic sql executed in your spid, if you create the table in dynamic sql, it's not visible outside of that.
There is a workaround. You can create a stub table and alter it in your dynamic sql. It requires a bit of string manipulation but I've used this technique to generate dynamic datasets for tsqlunit.
CREATE TABLE #t1
(
DummyCol int
)
EXEC(N'ALTER TABLE #t1 ADD foo INT')
EXEC ('insert into #t1(DummyCol, foo)
VALUES(1,2)')
EXEC ('ALTER TABLE #t1 DROP COLUMN DummyCol')
select *from #t1