I'm simply trying to get the average time it takes each function to run.
That means I want the:
"Total time inside the function" / "Number of calls to the function"
I'm getting all sorts of information when I run an analysis from within VTune.
These are the settings I'm using:
And also:
But I can't find where average time is.
I can see the Total-Time per function but can't find the call count.
Using Visual Studio 2012, Vtune Amplifier XE 2013, Update 9.
Please help.
1) You have to run "Advanced Hotspots" analysis configured like shown in your second screen-shot. "Basic Hotspots" will NOT provide you with call count information.
2) Once you completed "Advanced Hotspots" - you can find statistical (approximate) call count in Bottom-up View as shown in screen-shot below:
Finally, make sure that you have "Loops and functions" mode selected at the bottom right side of GUI (it's true by default, but who knows what options did you play with).
3) In order to figure out total time and self-time don't forget to make sure you changed "viewpoint" to "Hotspots" (see area highlighed in green in my first screen-shot and also see next picture).
4) Starting from 2016 release Parallel Studio has
"precise loop call count and trip count"
"precise function call count"
measurement tool
(as well as total, self and even elapsed time and lots of SIMD-parallelism related analysis) available in "Intel (a ka "vectorization") Advisor", see more info here:
Related
Do we have an API in Qtest that can provide summary of test cycle execution ?
E.g. Passed: 23 Failed: 7 Unexecuted: 10 Running: 2
Need this data for generating report in our consolidated reporting tool along with data from some other sources.
Nothing that gives exactly what you ask for, but you could use the API calls below to create it yourself.
You can get the status of all test runs in a project using
GET /api/v3/projects/{projectId}/test-runs/execution-statuses
Or, to get results from a specific test cycle, first find all the test runs in that cycle using
/api/v3/projects/{projectId}/test-runs?parentId={testCycleID}&parentType=test-cycle
(append &expand=descendants to find test runs in containers under the test cycle)
and then get the results of each run individually using
/api/v3/projects/{projectId}/test-runs/{testRunId}/test-logs/last-run
See https://qtest.dev.tricentis.com/
I am implementing Trial Balance(Version 2) FPM/Webdynpro App from Fiori Apps Library
following App Implementation : Trial Balance guide for S/4 Hana 1610.
When I launch the Trial Balance App.It says "Initialization of query 2CCFITRIALBALQ0001 Failed"(PFA for the error ).
Please let me know how to Initialize or Activate BEx Query.
Regards,
Sayed
The issue is resolved following the below steps :
1) Set a BW-client: Transaction SE37 RS_MANDT_UNIQUE_SET. If you use only one client, then fill I_MANDT with this one. If you use multiple clients, choose one of these.
2) Set user parameters RSWAD_DEV_MDVERSION = ‘072’ and RSWAD_SKIP_JAVA = ‘X’ for user DDIC(Its setting in transaction SU01 under parameter tab)
3) Logon to system with user DDIC in the client you used in step 1 and perform transaction RSTCO_ADMIN in order to activate the technical objects, which are needed for the engine. The parameters set in step 2 avoid, that unnecessary objects (related to BI tools based on JAVA) are activated here.
4) If you don't look at the OLAP-statistics you should deactivate these: Transaction SE38 - execute Report SAP_RSADMIN_MAINTAIN: with OBJECT = RSDDSTAT_GLOBAL_OFF and VALUE = X in insert mode. If you need the statistics, you can switch these on by running the program with that object but VALUE = space in update mode.
5) If you want to use OData-Services run report EQ_RS_AUTO_SETUP (transaction SE38)
6) If you want to use the BW time hierarchies, go to transaction RSRHIERARCHYVIRT and mark the hierarchies you need - for this you have to wait until the job triggered in step 3 has finished successfully
7) Call function module RSEC_GENERATE_BI_ALL.
Regards,
Rehan Sayed
checkmodel([Some Model]) opens the GUI "Dymola Messages", tab "Translation" and displays Errors, Warnings, and Messages.
Does anyone know how to write these infos to a logfile or get them as kind of return value of checkModel(). All I've found in the documentation was, that checkModel() only returns a success-boolean. Are these infos saved temporarily somewhere?
Note, that I only want to apply checkModel() but not actually translating the code.
I finally found a solution at least for Dymola 2016 and newer, so if someone is interested - here it is (it is not very user-friendly, but it works):
The key-command is getLastError() which not only returns the last error (as one could think...), but all errors that are detected by checkModel() as well as the overall statistics.
All informations are sampled in one string, in which the last lines looks like:
"[...]
Local classes checked, checking <[Some Path]>
ERROR: 2 errors were found
WARNING: 13 warnings were issued
= false
"
Following operations will return the number of actual errors (for warnings it is more or less the same):
b = checkmodel([Some Model])
s = getLastError()
ind1 = Modelica.Utilities.Strings.findLast(s,"ERROR:")
ind2 = Modelica.Utilities.Strings.findLast(s," errors were found")
nErrors = Modelica.Utilities.Strings.substring(s,ind1+6,ind2) //6 = len(ERROR:)
nErrors = Modelica.Utilities.Strings.replace(nErrors," ","")
nErrors
= "2"
Note:
I used findLast as I know, that the lines of interest are at the very end of the string. So this is significantly faster than using find
This only works, if the line "ERROR: ...." actually exists. Otherwise, the substring call will throw an error.
Of course this could be done in less lines, but maybe this version is easier to read.
NOTE: This will only works with Dymola 2016 and newer. The return-string of getLastError is of a different structure in Dymola 2015 and older.
The following should handle it:
clearlog(); // To start fresh
Advanced.TranslationInCommandLog=true;
checkModel(...);
savelog(...);
This is mentioned in the Dymola User Manual Volume 1, section "Parameter studies by running Dymola a number of time in “batch mode”" on pg 630 or so.
In normal applescript, the script is executed down the page, and so any code in loops for every 5 seconds will only run while the loop is running - there is no way to have a single function run every few second regardless of what the script is currently doing or where it is in the script (that I know of). In cocoa-applescript, however, is there a way to run a handler every 5 seconds, at all times, no matter what it is currently doing? Here is what it should be doing in my cocoa-applescript app:
on checkInternetStrength()
do shell script "/System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -I | grep 'agrCtlRSSI:'" -- this being the script which returns the line containing the signal strength
set SignalStrength to result
set RSSIcount to (count of characters in SignalStrength)
set SignalStrength to ((characters 18 thru RSSIcount of SignalStrength) as string) as integer -- this to turn SignalStrength into just the number and not the whole output line
set SignalStrength to (100 + SignalStrength) as integer
set SignalBar's setIntValue_(SignalStrength) -- SignalBar being the Level Indicator described below
end checkInternetStrength
Summed up, it runs the airport command to check internet connection, turns this into a number from 1 to 100 and uses this on an NSLevelIndicator (100 maximum) to show current signal strength graphically. Now, there is no point having this run once or when you hit a button - that is an option, but it would be nice if it updated itself every, say, 5 seconds with the realtime value. So is there any way to have a process which runs every 5 seconds to do this, while still enabling full functionality of the rest of the script and interface - i.e. as a background process? Comment if you need more extracts from the script.
Example
In Unity-C# scripting, the 'void Update() {code}' will run the code within it every frame while doing everything else simultaneously, so a cocoa-applescript version of this might be an answer, if anyone knows.
I Dont believe this is possible but what I had a similar problem before, what i do, I have an external applescript applicaion that is hidden the repeats the commands, the only problem is, it wont send it back to the app, you'll have to make the external applescript app do it, like
display notification, etc..., in the applescript apps "Info.plist" you can add this:
<key>LSUIElement</key>
<string>1</string>
To make the app run invisibly, but sorry i dont think you can run a handler in the app its self
I am using the function getgroup() to read all of the groups of a user in the active directory.
I'm not sure if I'm doing something wrong but it is very very slow. Each time it arrives at this point, it takes several seconds. I'm also accessing the rest of Active directory using the integrated function of "Accountmanagement" and it executes instantly.
Here's the code:
For y As Integer = 0 To AccountCount - 1
Dim UserGroupArray As PrincipalSearchResult(Of Principal) = UserResult(y).GetGroups()
UserInfoGroup(y) = New String(UserGroupArray.Count - 1) {}
For i As Integer = 0 To UserGroupArray.Count - 1
UserInfoGroup(y)(i) = UserGroupArray(i).ToString()
Next
Next
Later on...:
AccountChecker_Listview.Groups.Add(New ListViewGroup(Items(y, 0), HorizontalAlignment.Left))
For i As Integer = 0 To UserInfoGroup(y).Count - 1
AccountChecker_Listview.Items.Add(UserInfoGroup(y)(i)).Group = AccountChecker_Listview.Groups(y)
Next
Item(,) contains my normal Active directory data that I display Item(y, 0) contain the username.
y is the number of user accounts in AD. I also have some other code for the other information in this loop but it's not the issue here.
Anyone know how to make this goes faster or if there is another solution?
I'd recommend trying to find out where the time is spent. One option is to use a profiler, either the one built into Visual Studio or a third-party profiler like Redgate's Ants Profiler or the Yourkit .Net Profiler.
Another is to trace the time taken using the System.Diagnostics.Stopwatch class and use the results to guide your optimization efforts. For example time the function that retrieves data from Active Directory and separately time the function that populates the view to narrow down where the bottleneck is.
If the bottleneck is in the Active Directory lookup you may want to consider running the operation asynchronously so that the window is not blocked and populates as new data is retrieved. If it's in the listview you may want to consider for example inserting the data in a batch operation.