I am writing some PL/SQL code for a apex database application. With the code a want to realise that when I make a purchase order, a purchase orderline is automatically generated based on the purchase order_id. However, I'm getting a ORA-04071 error running the code below:
create or replace trigger "INKOOPORDER_T1"/
AFTER insert or update or delete on INKOOPORDER
for each row begin
INSERT INTO INKOOPORDERREGEL
(I_nummer)
SELECT
I_nummer
FROM inkooporderregel
go
end/
Can somebody help me please?
ur query has some syntax errors
try below code
I removed / from first line and after End, put ; at the end of insert statement and deleted go.Also after end a ;
create or replace trigger "INKOOPORDER_T1"
AFTER insert or update or delete on INKOOPORDER
for each row
begin
INSERT INTO INKOOPORDERREGEL
(I_nummer)
SELECT
I_nummer
FROM inkooporderregel;
end;
Related
I'm taking my first steps in Pl/SQL and am struggling with triggers. I've tried creating the trigger below but am receiving this error:
Error at line 2: PL/SQL: SQL Statement ignored
PL/SQL: ORA-00942: table or view does not exist
To clarify: I have checked the name of the table over and over, and it does exist. It is also in the same schema as the trigger I'm trying to create. The 'customer_seq.NEXTVAL' refers to a sequence created previously that runs without errors.
The code is as follows:
CREATE TRIGGER new_customer
BEFORE INSERT ON customer
FOR EACH ROW
BEGIN
INSERT INTO customer_id VALUES ('c-', customer_seq.NEXTVAL);
END;
Thanks in advance for any help.
You probably intend something like this:
CREATE TRIGGER new_customer
BEFORE INSERT ON customer
FOR EACH ROW
BEGIN
SELECT customer_seq.NEXTVAL INTO :NEW.customer_id
FROM dual;
END;
It is unclear what the purpose of 'C_' is. If it is part of the customer id, I would advise you to stick to numbers.
Also note that more recent versions of Oracle support generated always as identity -- which is much preferred over defining a sequence and trigger.
I am looking to create a trigger that will bring back staff id when a row is inserted.
I have this so far:
CREATE OR REPLACE TRIGGER insert_trigger
BEFORE
INSERT ON staff
FOR EACH ROW
DECLARE
v_staff_id VARCHAR2(5);
BEGIN
SELECT staff_id from staff INTO v_staff_id FROM dual;
END;
I keep getting errors like sql statment ignored and command not ended properly for this line:
v_staff_id VARCHAR2(5);
Any help would be appreciated.
Thanks
You can access the new/altered data(inserted/update data) by using semi-column ':'
As you are writing trigger while inserting the data you need to use :new.column_name.
In the example it is :new.staff_id.
For complete reference please check
http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_7004.htm
I am having an issue with a trigger. After I add the trigger to my database, when I try to insert a row that the trigger will act on, I get a mutating table error. I don't know how to avoid this. Would someone mind looking at this and tell me what I am doing wrong, and how to rewrite it?
CREATE OR REPLACE TRIGGER ORNG_INV_LINE_TOTAL_TRIGGER
FOR INSERT OR UPDATE ON ORNG_INV_LINE
COMPOUND TRIGGER
AFTER EACH ROW IS
BEGIN
UPDATE ORNG_INVOICE SET Inv_Amount = (SELECT SUM(ORNG_INV_LINE.Inv_Line_Total)
FROM ORNG_INV_LINE
WHERE ORNG_INVOICE.INV_Num = :NEW.INV_Num);
END AFTER EACH ROW;
END ORNG_INV_LINE_TOTAL_TRIGGER;
/
I'm not sure why it is triggering an error. I'm trying to do the action after the update. All I want to do is get the sum for all of the lines of all matching invoice numbers, and write that value in the INVOICE table. Thanks for the help.
Your trigger is written on the table ORNG_INV_LINE for insert or update and again you made a select on the same table while updating ORNG_INVOICE table so trigger is mutating,
to over come this you have to use statement level trigger instead of row level trigger .
i.e after each statement should be there in code instead of after each row.
This can help you.
Here is the solution...apparently everyone is busy with Thanksgiving. Hopefully this helps the next guy.
create or replace TRIGGER ORNG_INV_L_TTL_TRIG
AFTER INSERT OR UPDATE OR DELETE ON ORNG_INV_LINE
BEGIN
UPDATE ORNG_INVOICE SET Inv_Amount = (SELECT SUM(Inv_Line_Total)
FROM ORNG_INV_LINE
WHERE INV_Num = ORNG_INVOICE.INV_Num);
END ORNG_INV_L_TTL_TRIG;
/
I need help on creating a trigger on my table1
that will insert specific columns into table2 from table1.
How can i do that? I am using Oracle 11G XE .
Here is my code:
create trigger AllowanceTrigger
on ex_bulacan
after insert
as
insert into allowance VALUES (PLANT_ORIGIN,SO_NO, SO_STATUS,SO_REMARKS,DRIVER_NAME)
select plant_origin, sales_order_no, status,remarks, driver_name
from ex_bulacan;
go ;
When I run that command I get this error
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
The explanation is:
ORA-04071. 00000 - "missing BEFORE, AFTER or INSTEAD OF keyword"
*Cause: The trigger statement is missing the BEFORE/AFTER/INSTEAD OF clause.
*Action: Specify either BEFORE, AFTER or INSTEAD OF.
There is no "go" statement in PL/SQL, and you have not followed the correct syntax for a trigger definition (it is well documented)
Try this:
create trigger AllowanceTrigger
after insert on ex_bulacan
begin
insert into allowance (PLANT_ORIGIN,SO_NO, SO_STATUS,SO_REMARKS,DRIVER_NAME)
select plant_origin, sales_order_no, status,remarks, driver_name
from ex_bulacan;
end;
I'm not sure whether it does what you intended. It fires once per insert statement, not for each row, and it inserts all rows from ex_bulacan into allowance, not just the ones you just inserted. Maybe what you want is actually:
create trigger AllowanceTrigger
after insert on ex_bulacan
for each row
begin
insert into allowance (PLANT_ORIGIN,SO_NO, SO_STATUS,SO_REMARKS,DRIVER_NAME)
values (:new.plant_origin, :new.sales_order_no, :new.status, :new.remarks,
:new.driver_name);
end;
There is a syntax error in your code. You must specify the trigger in this order:
CREATE TRIGGER AllowanceTrigger
AFTER INSERT
ON ex_bulacan
Trying to create an Oracle trigger that runs after a table is updated in any way. I've been googling this all morning and came up with this:
CREATE OR REPLACE TRIGGER gb_qty_change
AFTER UPDATE OR INSERT OR DELETE ON F_ITEM_STORE
FOR EACH ROW
DECLARE
v_qty V_AD_ON_HAND%rowtype;
v_isbn TD_ITEM_DESCRIPTION.TD_IDENTIFIER%type;
BEGIN
delete from gb_transaction where gb_tide = :new.ITST_ITEM_TIDE_CODE;
select TD_IDENTIFIER INTO v_isbn from TD_ITEM_DESCRIPTION where TD_TIDE = :new.ITST_ITEM_TIDE_CODE;
select * INTO v_qty from V_AD_ON_HAND where ITST_ITEM_TIDE_CODE = :new.ITST_ITEM_TIDE_CODE;
insert into gb_transaction(gb_tide, gb_isbn, gb_used_on_hand, gb_new_on_hand)
values(:new.ITST_ITEM_TIDE_CODE, v_isbn, v_qty.USED_ON_HAND, v_qty.NEW_ON_HAND);
END;
/
I'm trying to keep it to a single record per TIDE_CODE in the new table.
V_AD_ON_HAND is a view that pulls an inventory count.
gb_transaction is my new table where I'm logging these events
Comparing it to other peoples code it looks like it should run but I'm getting "Warning: Trigger created with compilation errors."
The problem, I believe is with the :new designations for a delete trigger. There is, after all, no NEW value as the record is expunged. You can only access the :OLD values on delete.
if you section the trigger by operation, you can do this.
CREATE OR REPLACE TRIGGER gb_qty_change
AFTER UPDATE OR INSERT OR DELETE ON F_ITEM_STORE
FOR EACH ROW
DECLARE
v_qty V_AD_ON_HAND%rowtype;
v_isbn TD_ITEM_DESCRIPTION.TD_IDENTIFIER%type;
BEGIN
IF INSERTING or UPDATING then
... insert your existing code
ELSE
... do something similar with the :old values for the deleting case
end if;
END;
/
Incidentally, it is generally helpfull if you tell us WHAT the error is, not just that you had one. If compiling via SQL*Plus script, after the forward slash call to compile the trigger after the "end;" statement, add a line that says:
SHOW ERRORS TRIGGER YOUR_TRIGGER_NAME;