Has anyone built ssldump on Ubuntu lately? I am having trouble building http://downloads.sourceforge.net/project/ssldump/ssldump/0.9b3/ssldump-0.9b3.tar.gz - it appears to be referencing libraries that are too old for Ubuntu 12.04. I am trying this so that I can apply the TLS patch that is at http://sourceforge.net/p/ssldump/patches/8/.
If anyone has specific instructions to build ssldump, please share.
Assuming you have the necessary development libraries (personally, the easiest way for me is to "sudo apt-get install gnome-devel")
sudo apt-get install libpcap0.8-dev
sudo ln -sf /usr/include/pcap-bpf.h /usr/include/net/bpf.h
sudo apt-get install libssl-dev
Then cd into the ssldump source directory and: ./configure --host=i686-pc-linux-gnu --with-pcap-lib=/usr/lib/x86_64-linux-gnu/
make -j4
That should get you there. It worked for me on ubuntu 15.04. I may have missed out a few things though, cos I did it a couple of weeks ago, so if something doesn't work, leave a comment.
Related
I'm using Ubuntu 14.04 and I am updating the rpmbuild spec file of an application that now uses Qt.
The packages that I need are the following:
sudo apt-get build-essential
sudo apt-get install mesa-common-dev -y
sudo apt-get install libglu1-mesa-dev -y
sudo apt-get qt5-default
sudo apt-get qtwebengine5-dev
I know the spec file has "BuildRequires" and "Requires" dependency tags...any help in writing this as well as some examples would be helpful. I have a working spec file I just need to add the dependencies.
I think there is some confusion here. spec files are used to generate rpm files. However Ubuntu uses deb files.
Supposing you really want to create an rpm; then you need to know this:
BuildRequires
these packages are required for building the rpm. Typically you will need build-essential and the '*-dev` packages for building your application
Requires
these packages are required upon installation for your application to work; mostly you don't need your build-tools anymore, but you still need the qt5-default for example.
PS: on a little side note I might be one of the only people in the world building deb packages using spec files with a special conversion script https://bitbucket.org/klaussfreire/spec2deb/src/default/ but I wouldn't really recommend that.
In my site I am getting an error : an error occurred while processing this directive
It was working fine before moving to the new server. So when I checked I found that mod_perl module is missing. So I tried to install it by downloading the module to the server and then tried to run using Perl Makefile.pl but it was asking for apache src and I was not able to find it. I can see /usr/bin/apache/ folder but no source file inside the folder.
So I tried to install the module from Cpanel but I got the following error:
The C compiler is not functional and auto repair failed. Perl module installs require a working C compiler. Please repair the C compiler and try again.
Please let me know how to install it as I have tried most of the cases searching the net.
Thanks in advance
It's probably best to use your distro's packaging system to install mod_perl, especially, if apache is installed from a package too.
Yum based systems:
yum install mod_perl
Deb based systems
apt-get install mod_perl
you may need to enable the module using a2enmod
Mostly gcc is either corrupted or not present on your system. Please try to re/install gcc on your system
sudo apt-get update
sudo apt-get install build-essential
On Redhat:
yum update
yum install devtoolset-2-toolchain
It seems like a problem with your installation of gcc. You're using CloudLinux, so you should use yum to reinstall gcc.
$ sudo -i yum install gcc
But you don't need gcc if you install the pre-build packages.
$ sudo -i yum install mod_perl
Either way, you're going to need to get to grips with package installation for your system - and for that you're going to need root access.
I can't seem to install CGAL properly on my computer. I'm using Ubuntu, and I ran these commands, like it says to do in the directions.
sudo apt-get install libcgal-dev
sudo apt-get install libcgal-demo
They install fine, no errors. But then the directions say to cd into CGAL-4.7, but couldn't find it. I found a CGAL under /usr/include, and it seems to include all the algorithm files. But there are no MakeFile/CMakeLists to cmake.
I'm not sure what to do?
Never mind, once I found it, I tried this below and it worked
cd /path/to/program
cgal_create_CMakeLists -s executable
cmake -DCGAL_DIR=$HOME/CGAL-4.7 .
make
I installed nginx, php, php-fpm, php-pecl-redis by yum.
All of them work but the last one.
When I run /usr/sbin/php-fpm, I got this:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/redis.so' - /usr/lib/php/modules/redis.so: undefined symbol: igbinary_unserialize in Unknown on line 0
I don't know what igbnary_unserialize means and how to fix it.
I checked the redis.so file under right path. I add extension=redis.so to php.ini
PHP version: 5.3.3
PhpRedis version: 2.2.7
I had the same issue. I'm on Ubuntu 16.04 LTS. Running sudo apt-get install php-igbinary resolved the issue for me. I have other issues, but that's what solved this one.
For people who are upgrading their php from 7.0 to 7.4 like me, and not able to get php-redis working. These are the steps I used after following the answers above.
1) remove Redis
sudo apt purge php-redis
2) Install Igbinary
sudo apt-get install php-igbinary
3) Install php-redis again
sudo apt-get install php-redis
I did the steps above because it seems only php7.0 is recognising the php-redis install but not the currently enabled php7.4
I also recommend removing other versions of PHP if you have should your problem continue unsolved.
Probably an issue with igbinary, is this installed? (try for example: cat /etc/php.d/igbinary.ini).
Here you can find and install igbinary
Related to this bug https://bugs.launchpad.net/ubuntu/+source/php-redis/+bug/1762935
You should remove php-redis from packages:
apt purge php-redis , and install it via pecl install redis
You should add "extension=redis.so" to php.ini
and remove redis from config.d in your php directory:
rm /etc/php/7.2/fpm/conf.d/#20-redis.ini
and
rm /etc/php/7.2/cli/conf.d/#20-redis.ini
restart php fpm and you will see that problem solved
On Ubuntu 20 and PHP 7.4
I did this and it worked :
sudo apt purge php-redis
sudo apt intall php-redis php7.4-redis
TEST redis server :
$ php --ri redis
or
$ redis-cli ping
$ redis-cli info stats
just resolve the same problem:
php-pecl-redis installed by yum will cause this problem.
so you need to install the php-redis manually. wget the package and phpize - configure - make ....
I tried to install Apache 2.4.12 from the installation page on the Apache website but to no avail. It said that I needed to install APR, APR-Util and Perl-Compatible Regular Expressions Library (PCRE). So I downloaded them and installed them, so I thought it still gave me an error I think that I am compiling something wrong so if someone could lead me in the right direction that would be great.
Thanks.
why don't you just use:
sudo apt-get install apache2
Cheers,
Nioidai
Please note that you should always install the latest version of a software for more security. I suggest you to install Apache from Ubuntu's apt package manager 'if you are on a production server'. Installing it from source on a local environment doesn't matter.
I've also been trying to do this lately.
Please follow this for the instructions of installing it, by me, with a bit more explanation.
Hope it helps.
To be clean, follow the same steps:
1) Go to http://httpd.apache.org/download.cgi
2) Right click and copy the link of the link like 'Source: httpd-2.4.41.tar.gz'
3) Go to the terminal, and enter the following commands one by one and hit enter for no confusion:
a.
cd /usr/local/src
b.
sudo wget -O- <download-link> | tar -zxf -
c.
sudo apt install libnghttp2 libpcre3 libssl build-essential -y
d. Go to http://apr.apache.org/download.cgi and copy the link like 'Unix Source: apr-1.7.0.tar.gz'
sudo wget -O- <apr-download-link> | tar -zxf -
e. Go to http://apr.apache.org/download.cgi and copy the link like 'Unix Source: apr-util-1.6.1.tar.gz'
sudo wget -O- <apr-util-download-link> | tar -zxf -
f.
sudo mv apr-<apr-version> httpd-<apache-version>/srclib/apr
g.
sudo mv apr-util-<apr-util-version> httpd-<apache-version>/srclib/apr-util
h.
cd httpd-<apache-version>
i. According to me, this configuration is better than any other. The --prefix is where apache is installed.
sudo ./configure --prefix=/usr/local/apache2 --enable-mods-shared="reallyall" --enable-mpms-shared="all"
j.
sudo make
k.
sudo make install
These directories could be altered using the Step 'i'
The apache directory is /usr/local/apache2.
The apache conf directory is /usr/local/apache2/conf.
The apache main conf file is /usr/local/apache2/conf/httpd.conf.
For more info go to http://httpd.apache.org/docs/current/install.html.
Thanks