I just recently got into whatever you might call this stuff. I was just trying to send a java file over to the computer I ssh to. But when I went to do it, I just get told
sh: connect to host port 22: Connection timed out
lost connection
If possible I would like it explained very simply because of how new I am to this kind of stuff.
SSH to remote host(VM Ubuntu) from VS code terminal
Install VS Code with Remote Development extension pack.
Install Virtual machine (Virtual box) and Ubuntu running on it.
Check Ubuntu-Network-Settings-IPv4 address (10.0.2.15-default for VM).
Go to your virtual box Settings-Network-NAT Adapter (double-check).
Go to your virtual box Settings-Network-In Advanced-Port Forwarding.
Add this as given below and click ok and hereafter consider 127.0.1.1 for ssh.
portforwardinginVM
View the status and disable firewall settings in Ubuntu VM (ufw command).
In VS Code, View-Command Palette- Add new SSH host .
Add ssh username#127.0.1.1 and enter.
Or go to the terminal window (eg. Powershell) and type ssh username#127.0.1.1, it will ask if you want to update to host lists permanently, asking like yes/no and also your Ubuntu password to confirm.
Now try to connect to the host using username#127.0.1.1 and selecting OS like Ubuntu, then type the Ubuntu password.
That's it you are logged in to your virtual machine and can access files now from your local machine.
I have the following setup:
A Windows 10 Pro Laptop ("Win10Laptop") that has a Windows 10 Pro VM ("Win10VM") running on Hyper-V. I have created an nginx container by running the following command on the host machine:
docker run -d -p 80:80 --name webserver nginx
While the container is running I can access http://localhost from Win10Laptop and this works fine. My question is what do I need to configure to access nginx from Win10VM? Win10VM has only one network adaptor which is configured to use the "External" Vswitch connected to my Wifi interface.
Let me know if you need any more details. I've tried all sorts and can't figure it out!
Thanks,
Michael
You need to connect to the IP the VM has acquired on the External switch. Run ipconfig inside the VM to see what IP it has, then open http://<vm-ip> from your host.
I have used these instructions for Running Gui Apps with Docker to create images that allow me to launch GUI based applications.
It all works flawlessly when running Docker on the same machine, but it stops working when running it on a remote host.
Locally, I can run
docker --rm --ti -e DISPLAY -e <X tmp> <image_name> xclock
And I can get xclock running on my host machine.
When connecting remotely to a host with XForwarding, I am able to run X applications that show up on my local X Server, as anyone would expect.
However if in the remote host I try to run the above docker command, it fails to connect to the DISPLAY (usually localhost:10.0)
I think the problem is that the XForwarding is setup on the localhost interface of the remote host.
So the docker host has no way to connect to DISPLAY=localhost:10.0 because that localhost means the remote host, unreachable from docker itself.
Can anyone suggest an elegant way to solve this?
Regards
Alessandro
EDIT1:
One possible way I guess is to use socat to forward the remote /tmp/.X11-unix to the local machine. This way I would not need to use port forwarding.
It also looks like openssh 6.7 will natively support unix socket forwarding.
When running X applications through SSH (ssh -X), you are not using the /tmp/.X11-unix socket to communicate with the X server. You are rather using a tunnel through SSH reached via "localhost:10.0".
In order to get this to work, you need to make sure the SSH server supports X connections to the external address by setting
X11UseLocalhost no
in /etc/ssh/sshd_config.
Then $DISPLAY inside the container should be set to the IP address of the Docker host computer on the docker interface - typically 172.17.0.1. So $DISPLAY will then be 172.17.0.1:10
You need to add the X authentication token inside the docker container with "xauth add" (see here)
If there is any firewall on the Docker host computer, you will have to open up the TCP ports related to this tunnel. Typically you will have to run something like
ufw allow from 172.17.0.0/16 to any port $TCPPORT proto tcp
if you use ufw.
Then it should work. I hope it helps. See also my other answer here https://stackoverflow.com/a/48235281/5744809 for more details.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 4 years ago.
Improve this question
I have a Ubuntu VM running on my Windows 7 machine. How do I set it up so that I can access the webserver externally through SSH?
I found steps (Setup SSH access between VirtualBox Host and Guest VMs) to be able to ssh to my guest from my host, but that still leaves me with the problem of accessing it through my router.
I suppose that I could install an SSH server on my Windows machine and then tunnel a few times (though I'm not 100% sure what to use in terms of local, dynamic, etc. or how to set up multiple tunnels?), but is there a way to make the VM directly accessible to my router so I could directly port forward to it?
The best way to login to a guest Linux VirtualBox VM is port forwarding. By default, you should have one interface already which is using NAT. Then go to the Network settings and click the Port Forwarding button. Add a new Rule. As the rule name, insert "ssh". As "Host port", insert 3022. As "Guest port", insert 22. Everything else of the rule can be left blank.
or from the command line
VBoxManage modifyvm myserver --natpf1 "ssh,tcp,,3022,,22"
where 'myserver' is the name of the created VM. Check the added rules:
VBoxManage showvminfo myserver | grep 'Rule'
That's all! Please be sure you don't forget to install an SSH server in the VM:
sudo apt-get install openssh-server
To SSH into the guest VM, write:
ssh -p 3022 user#127.0.0.1
Where user is your username within the VM.
Change the adapter type in VirtualBox to bridged, and set the guest to use DHCP or set a static IP address outside of the bounds of DHCP. This will cause the Virtual Machine to act like a normal guest on your home network. You can then port forward.
Keeping the NAT adapter and adding a second host-only adapter works amazing, and is crucial for laptops (where the external network always changes).
http://muffinresearch.co.uk/archives/2010/02/08/howto-ssh-into-virtualbox-3-linux-guests/
Remember to create a host-only network in virtualbox itself (GUI -> settings -> network), otherwise you can't create the host-only interface on the guest.
You can also use a Bridged Network (or "Bridge Adapter", in newer versions) in network settings. This will put your VM in a VLAN with your machine. So you can just ssh into the VM like this.
ssh user#IP_OF_VM
How to do host-only network (better than bridged) for Solaris 10 and Ubuntu 16.04
Add Host-only interface
Virtualbox > File > Preferences > Network > Host-only Networks > Add
Shutdown vm.
VM's Settings > Network. First adapter should be Nat, second Host-only.
Start cmd.exe and run ipconfig /all. You should see lines:
Ethernet adapter VirtualBox Host-Only Network:
...
IPv4 Address. . . . . . . . . . . : 192.168.59.1
Second adapter in guest should also be in 192.168.59.*.
Start VM.
Solaris 10
Check settings ifconfig -a. You should see e1000g0 and e1000g1. We are interested in e1000g1.
ifconfig e1000g down
ifconfig e1000g 192.168.56.10 netmask 255.255.255.0 up
Check from host if this interface is reachable: ping 192.168.56.10
Preserve those settings upon reboot
# vi /etc/hostname.e1000g1
192.168.56.10 netmask 255.255.255.0
# reboot
Configure ssh service (administering) to login as root (not adviced)
Check if ssh is enabled
# svcs -a | grep ssh
online 15:29:57 svc:/network/ssh:default
Modify /etc/ssh/sshd_config so there is
PermitRootLogin yes
Restart ssh service
svcadm restart ssh
From host check it
ssh root#192.168.56.10
Ubuntu 16.04
List interfaces:
ip addr
You should see three interfaces like lo, enp0s3, enp0s8. We will use the third.
Edit /etc/network/interfaces
auto enp0s8
iface enp0s8 inet static
address 192.168.56.10
netmask 255.255.255.0
Then sudo ifup enp0s8. Check if enp0s8 got correct address. You should see your ip:
$ ip addr show enp0s8
...
inet 192.168.56.10/24 brd 192.168.56.255 scope global secondary enp0s8
If not, you may run sudo ifdown enp0s8 && sudo ifup enp0s8
https://superuser.com/questions/424083/virtualbox-host-ssh-to-guest/424115#424115
In order to ssh to a Ubuntu VM running in VirtualBox from your host machine, you need to set up two network adapters for the VM.
First of all, stop the VM if not yet.
Then select the VM and click the Settings menu in the VirtualBox toolbar:
Set up Adapter 1
Set up Adapter 2
(Note: you don't need to set up any port forwarding.)
That's it. Once set up, you can start your VM. In your VM, the network configuration will look like below and you'll have Internet access too:
Also in your host machine, you can ssh to your VM:
Be sure that the SSH server has been installed and up running in the VM.
$ ps aux | grep sshd
root 864 0.1 0.5 65512 5392 ? Ss 22:10 0:00 /usr/sbin/sshd -D
If not, install it:
$ sudo apt-get install openssh-server
Also for your information:
My VirtualBox version: 5.2.6 r120293 (Qt5.6.2), 2018
My Ubuntu version: Ubuntu 16.04.3 LTS
My host machine: Windows 10
SSH Back to Your Home / Office VirtualBox Guest Machine From The INTERNET
The answers provided by other users here : How to SSH to a VirtualBox guest externally through a host?
... helped me to accomplish the task of connecting from out on the internet to my home computer's guest machine. You should be able to connect using computers, tablets, and smart phones (android, IPhone,etc). I add a few more step in case it might be helpful to someone else:
Here is a quick diagram of my setup:
Remote device ---> INTERNET --> MODEM --> ROUTER --> HOST MACHINE --> GUEST VM
Remote device (ssh client) ---> PASS THRU DEVICES ---> GUEST VM (ssh server)
Remote device (leave ssh port 3022) ---> INTERNET --> MODEM --> ROUTER (FWD frm:p3022 to:p3022)--> HOST MACHINE (FWD frm:p3022 to:p22) --> GUEST VM (arrive ssh port 22)
The key for me was to realize that ALL connections was PASSING-THROUGH intermediary devices to get from my remote PC to my guest virtual-machine at home --Hence port forwarding!
Notes:
* Need ssh client to request a secure connection and a running ssh server to process the secure connection.
I will forward the port 3022 as used in the chosen answer from above.
Enter your IPs where needed (home modem/router, host IP, guest IP,etc.), Names chosen are just examples-use or change.
1.Create ssh tunnel to port 3022 on your modem's IP / router's external IP address.
ssh client/device possible commands: ssh -p 3022 user-name#home_external_IP
2.Port forward = we are passing thru the connection from router to host machine
Also make sure firewall /IPtable rules on router is allowing ports to be forward (open if needed)
Router's Pfwd SCREEN required entries: AppName:SSH_Fwd, Port_from: 3022, Protocol:both (UDP/TCP), IP_address:hostIP_address, Port_to:3022, everything else can be blank
DD-WRT router software resources / Info:
DD-WRT Port_Forwarding
DD-WRT Static_DHCP
3.Host Machine Firewall: open port 3022 #so forwarded port can pass thru to guest machine
Host Machine: Install VirtualBox, guest additions, and guest machine if not done already
Configure guest machine and then follow the Network section below
I used VirtualBox GUI to setup guest's network- easier than CLI
If you want to use other methods refer to : VirtualBox/manual/ch06.html#natforward
4.Some suggest using Network Bridge adapter for guest = access to LAN and other machines on your LAN. This also pose an increase security risk, because now your guest machine is now exposed to LAN machines and possibly the INTERNET hackers if firewall not setup properly. So I selected Network adapter attached to NAT for less exposure to bridged security risks.
On the guest machine do the following:
Guest Machine VirtualBox Network settings: Adapter 1: Attached to NAT
Guest Machine VirtualBox Port Forwarding Rule: Name:External_SSH, Protocol:TCP, Host Port: 3022, Guest Port 22, Host&guest IPs:leave blank
click on advance in Network section then click on Port forwarding to enter rules
Guest Machine Firewall: open port 22 #so ssh connection can enter
Guest Machine: Make sure that ssh server is installed, configured properly, and running
LINUX test to see if ssh server running w/command: sudo service ssh status
Can check netstat to see if connection made to port 22 on the guest machine
Also there are different ssh servers and clients depending on platform using.
wikipedia/Secure_Shell
wikipedia/Comparison_of_SSH_servers
wikipedia/Comparison_of_SSH_clients
For Ubuntu Users:
ubuntu community: SSHOpenSSH/Configuring
ubuntu/community: OpenSSH/Keys
That should be it. If I made a mistake or want to add anything -feel free to do so-- I am still a noob.
Hope this helps someone. Good luck!
For Windows host, you can :
In virtualbox manager:
select ctrl+G in your virtualbox manager,
then go to network pannel
add a private network
make sure that activate DHCP is NOT selected
In network management (windows)
Select the newly created virtualbox host only adapter and the physical network card
Right-Click and select "Make bridge"
Enjoy
You can also initiate a port forward TO your HOST, OR ANY OTHER SERVER, from your Guest. This is especially useful if your Guest is 'locked' or can't otherwise complete the ModifyVM option (e.g. no permission to VBoxManage).
Three minor requirements are 1) you are/can log into the VirtualBox Guest (via 'console' GUI, another Guest, etc), 2) you have an account on the VirtualBox HOST (or other Server), and 3) SSH and TCP forwarding is not blocked.
Presuming you can meet the 3 requirements, these are the steps:
On the Guest, run netstat -rn and find the Gateway address to the default route destination 0.0.0.0. Let's say it's "10.0.2.2". This 'Gateway' address is (one of) the VirtualBox Host virtual IP(s).
On the Guest, run ssh -R 2222:localhost:22 10.0.2.2 where "10.0.2.2" is the VirtualBox server's IP address -OR- any other server IP you wish to port forward to.
On the Host, run ssh 10.0.2.2 -p2222 where 10.0.2.2 is the default gateway/VBHost virtual IP found in step 1. If it is NOT the VirtualBox host you are port forwarding to, then the command is ssh localhost -p2222
Follow below steps to login to your ubuntu VM running in virtual box from the host machine using putty (Without port forwarding):
On Virtualbox manager select the vm, click on settings icon. Then go Networks and enable two adaptors as below:
Adaptor 1 (For internet access): Attached to -> NAT, Advanced -> Check the cable connected.
Adaptor 2: Attached to -> Host only adaptor, Advanced -> Check the cable connected and Promiscuous mode -> Allow all.
Start the ubuntu vm.
Login to the VM as root.
Edit the file '/etc/network/interfaces' as below and save it:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
auto eth1
iface eth1 inet dhcp
Restart the VM.
Login to the VM and run below command to check the IP allocated to eth1:
ifconfig
Use this IP to open putty session for the VM.
A good explanation about how to configure port forwarding with NAT is found in the VirtualBox documents:
http://www.virtualbox.org/manual/ch06.html#natforward
Ubuntu 18.04 LTS
Configuration with bridged to see the server ip, and connect without "port forwarding"
VirtualBox > right click in server > settings > Network > enable adapter 2 > select "bridged" > Promiscuous mode: allow all > Check the cable connected > start server
On ubuntu server, edit sudo nano /etc/netplan/*init.yaml file,
My sample file:
network:
ethernets:
enp0s3:
addresses: []
dhcp4: true
enp0s8:
addresses: [192.168.0.200/24]
dhcp4: no
dhcp6: no
nameservers:
addresses: [8.8.8.8, 8.8.4.4]
version: 2
Commands that will help you
nano /etc/netplan/file.yaml # file to specify the rules of network
reboot now # restart ubuntu server right now
netplan apply # do after edited *.yaml, to apply changes
ifconfig -a # show interfaces with ip, netmask, broadcast, etc...
ping google.com # to see if there is internet
Configure Static IP Addresses On Ubuntu 18.04 LTS Server - with NetPlan
Simply setting the Network Setting to bridged did the trick for me.
Your IP will change when you do this. However, in my case it didn't change immediately. ifconfig returned the same ip. I rebooted the vm and boom, the ip set itself to one start with 192.* and I was immediately allowed ssh access.
On secure networks setting your network to bridge might not work. Administrators could only allow one mac address per port or even worse block the port should the switches detect multiple macs on one port.
The best solution in my opinion is to set up additional network interfaces to handle additional services you would like to run on your machines. So I have a bridge interface to allow for bridging when I take my laptop home and can SSH into it from other devices on my network as well as a host only adapter when I would like to SSH into my VM from my laptop when I am connected to the eduroam wifi network on campus.
Use NAT network adapter and Add port forward. Mention actual host ip.Do not use 127.0.0.1 or localhost.