VBA code to grab all files in folder is not finding files - vba

I am trying to set up a macro to pull all excel files in a folder into a database in access. I have the below code, but when I run the macro, it errors out into "No Files Found," so intFile = 0. However, there are files in the chosen folder. Why is it not finding them? I think I messed up the linking piece too but one problem at a time. I am obviously pretty new to VBA, so any help would be appreciated!
Thanks,
Option Compare Database
Option Explicit
'code will link to excel and pull site survey files into access tables
'Setting the path for the directory
Const strPath As String = "S:\LOG\PURCHASI\Daniel Binkoski\Outlook Attachments\R7398Z Look Forward Daily Snapshot"
'FileName
Dim strFile As String
'Array
Dim strFileList() As String
'File Number
Dim intFile As Integer
Sub Sample()
strFile = Dir(strPath & "*.xlsx")
'Looping through the folder and building the file list
strFile = Dir(strPath & "*.xlsx")
While strFile <> ""
'adding files to the list
intFile = intFile + 1
ReDim Preserve strFileList(1 To intFile)
strFileList(intFile) = strFile
strFile = Dir()
Wend
'checking to see if files where found
If intFile = 0 Then
MsgBox "No Files Found"
Exit Sub
End If
'going through the files and linking them to access
For intFile = 1 To UBound(strFileList)
DoCmd.TransferSpreadsheet acLink, , _
strFileList(intFile), strPath & strFileList(intFile), True, "A1:M50"
Next
MsgBox UBound(strFileList) & "Files were linked"
End Sub

try:
strFile = Dir(strPath & "\*.xlsx", vbNormal)
or add a final "\" onto your strPath value
You need another path separator to show you're looking in a directory, not at one.
I often use something like:
Dir(strPath & IIf(Right(strPath, 1) = "\", vbNullString, "\"))
as a check to ensure that the path always ends in a trailing backslash.

Related

Looping through all files in directory VBA

I'm trying to loop through all files in a given directory using VBA and replace a few words in each file before saving it in another directory. The method I'm using is:
With Application
Do While Len(fileName) > 0
Where fileName is:
fileName = Dir$("C:\FOLDER\" & "*")
After I run the code I have:
fileName = Dir
Loop
However, after it goes back to the top of the loop, it does not pick up any more files. I am sure there are multiple files in the given directory.. Any ideas?
Test it in separate Subs, this two codes works.
Sub LoopAllFiles()
Dim StrFile As String
StrFile = Dir$("C:\FOLDER\" & "*")
Do While Len(StrFile) > 0
StrFile = Dir
Loop
End Sub
Sub LoopAllFiles()
Dim StrFile As String
StrFile = Dir("C:\FOLDER\" & "*")
Do While StrFile <> ""
StrFile = Dir
Loop
End Sub

Automated sorting of files into folders using excel VBA

I am currently trying to put a macro together to sort files into folders based on a filename. I am locked into using VBA due to the system we are on.
For example sorting just the excel documents from below present in C:\ :
123DE.xls
124DE.xls
125DE.xls
124.doc
123.csv
into the following folder paths:
C:\Data\123\Data Extract
C:\Data\124\Data Extract
C:\Data\125\Data Extract
The folders are already created, and as in the example are named after the first x characters of the file. Batches of 5000+ files will need to be sorted into over 5000 folders so im trying to avoid coding for each filename
I am pretty new to VBA, so any guidance would be much appreciated. So far I have managed to move all the excel files into a single folder, but am unsure how to progress.
Sub MoveFile()
Dim strFolderA As String
Dim strFolderB As String
Dim strFile as String
strFolderA = "\\vs2-alpfc\omgusers7\58129\G Test\"
strFolderb = "\\vs2-alpfc\omgusers7\58129\G Test\1a\"
strFile = Dir(strFolderA & "*.xlsx*")
Do While Len(strFile) >0
Name StrFolderA & strFile As strFolderB & strFile
strFile = Dir
Loop
End Sub
Greg
EDIT
Sub MoveFile()
Dim strFolderA As String
Dim strFile As String
Dim AccNo As String
strFolderA = "\\vs2-alpfc7\omgUSERS7\58129\G Test\"
strFile = Dir(strFolderA & "*.xlsx*")
Do While Len(strFile) > 0
AccNo = Left(strFile, 2)
Name strFolderA & strFile As strFolderA & "\" & AccNo & "\Data Extract\" & strFile
strFile = Dir
Loop
End Sub
Thanks folks, are a few more bits and pieces i want to add, but functionality is there!
Sub DivideFiles()
Const SourceDir = "C:\" 'where your files are
Const topdir = "\\vs2-alpfc\omgusers7\58129\G Test\"
Dim s As String
Dim x As String
s = Dir(SourceDir & "\*.xls?")
Do
x = Left(s, 3) 'I assume we're splitting by first three chars
Name SourceDir & s As topdir & s & "\" & s
Loop Until s = ""
End Sub
If I understand you correctly, the problem is deriving the new fullpathname from the file name to use as the newpathname argument of the Name function.
If all of your files end with DE.XLS* you can do something like:
NewPathName = C:\Data\ & Split(strFile, "DE")(0) & "\Data Extract\" & strFile
You could use Filesystem object (tools > references > microsoft scripting runtime
This does a copy first then delete. You can comment out delete line and check copy is safely performed.
If on Mac replace "\" with Application.PathSeparator.
Based on assumption, as you stated, that folders already exist.
Option Explicit
Sub FileAway()
Dim fileNames As Collection
Set fileNames = New Collection
With fileNames
.Add "123DE.xls"
.Add "124DE.xls"
.Add "125DE.xls"
.Add "124.doc"
.Add "123.csv"
End With
Dim fso As FileSystemObject 'tools > references > scripting runtime
Set fso = New FileSystemObject
Dim i As Long
Dim sourcePath As String
sourcePath = "C:\Users\User\Desktop" 'where files currently are
For i = 1 To fileNames.Count
If Not fso.FileExists("C:\Data\" & Left$(fileNames(i), 3) & "\Data Extract\" & fileNames(i)) Then
fso.CopyFile (sourcePath & "\" & fileNames(i)), _
"C:\Data\" & Left$(fileNames(i), 3) & "\Data Extract\", True
fso.DeleteFile (sourcePath & "\" & fileNames(i))
End If
Next i
End Sub

VBA Open File From This Workbook's Folder Knowing Part of The Name

I am trying to open file from the same folder as the main workbook. The problem is that the name is not permanent and just one word stays always inside the name - "NAME".
I want to use specific method with Thisworkbook.Path to open the xlsx file but it is not finding the workbook with the code.
that is the relavant part of code:
Sub RemoveDuplicats()
Dim Harel As Workbook
Dim SAP As Workbook
Dim Path As String
Dim Found As String
Path = ThisWorkbook.Path
Found = Dir(Path & "*NAME*.xlsx") 'open SAP report
If Found <> "" Then
Set SAP = Workbooks.Open(Path & Found)
End If
End Sub
ThisWorkbook.Path Returns the path without trailing backslash,
try
Found = Dir ( Path & "\" & "*NAME*.xlsx")
You would need to Loop though all Fiels in this Folder and compare the File Names like this:
Dim StrFile As String
StrFile = Dir(ThisWorkbook.Path & "\*" & ".xlsm")
Do While Len(StrFile) > 0
If StrFile Like "*Name*" Then
MsgBox StrFile 'This will be your File
End If
StrFile = Dir
Loop

Replace text in documents in subfolders vba

I found this thread with the same issue as mine, but I've copied the code into my project, and it doesn't seem to work.
VBA macro: replace text in word file in all sub folders
I was stepping through the code, and it gets to line 32 (under the For Each varItem in colSubFolders) but then it skips right over the find/replace section to the end of the code. Is the problem in my file format?
EDIT: Additionally, when I get to varitem in ln 31, the value of "varitem" is the name of the folder, not the names of the word documents in the folder: I think this is where the issue is.
Sub DoLangesNow()
Dim file
Dim path As String
Dim strFolder As String
Dim strSubFolder As String
Dim strFile As String
Dim colSubFolders As New Collection
Dim varItem As Variant
' Parent folder including trailing backslash
'YOU MUST EDIT THIS.
strFolder = "L:\Admin\Corporate Books\2015\2014 Consents macro\company Annual Consents"
' Loop through the subfolders and fill Collection object
strSubFolder = Dir(strFolder & "*", vbDirectory)
Do While Not strSubFolder = ""
Select Case strSubFolder
Case ".", ".."
' Current folder or parent folder - ignore
Case Else
' Add to collection
colSubFolders.Add Item:=strSubFolder, Key:=strSubFolder
End Select
' On to the next one
strSubFolder = Dir
Loop
' Loop through the collection
For Each varItem In colSubFolders
' Loop through word docs in subfolder
'YOU MUST EDIT THIS if you want to change the files extension
strFile = Dir(strFolder & varItem & "\" & "*.doc")
Do While strFile <> ""
Set file = Documents.Open(FileName:=strFolder & _
varItem & "\" & strFile)
Use CMD to get all the files into an array and work with that instead - quicker and cleaner.
Sub S_O()
Dim fileArray As Variant
fileArray = Filter(Split(CreateObject("WScript.Shell").Exec("CMD /C DIR """ & strFolder & "\*.doc*"" /S /B /A:-D").StdOut.ReadAll, vbCrLf), ".")
For Each fil In fileArray
'//
'// Insert your code for doing the replacements here
'// e.g. Workbooks.Open(fil)
'// ...
Next
End Sub

VBA to link Excel spreadsheets to Access

I am creating a code in VBA in Access 2010 to link excel sheets and put them into tables in access. I keep getting an invalid outside of procedure at the strFile = Dir(StrPath &"*.xls") It keeps telling the the strPath is invalid outside procedure
Please help.
Option Compare Database
Option Explicit
'code will link to excel and pull site survey files into access tables
'Setting the path for the directory
Const strPath As String = "C:\Users\cparson\Documents\Survey_Eqpm\SiteSurveyData.xlsx"
'FileName
Dim strFile As String
'Array
Dim strFileList() As String
'File Number
Dim intFile As Integer
'Looping through the folder and building the file list
strFile = Dir(strPath & "*.xls")
While strFile <> ""
'adding files to the list
intFile = intFile + 1
ReDim Preserve strFileList(1 To intFile)
strFileList(intFile) = strFile
strFile = Dir()
Wend
'checking to see if files where found
If intFile = 0 Then
MsgBox "No Files Found"
Exit Sub
End If
'going through the files and linking them to access
For intFile = 1 To UBound(strFileList)
DoCmd.TransferSpreadsheet acLink, , _
strFileList(intFile), strPath & strFileList(intFile), True, "A5:J17"
Next
MsgBox UBound(strFileList) & "Files were linked"
End Sub
You have an End Sub but no procedure name?
Option Compare Database
Option Explicit
Const strPath As String = "C:\Users\cparson\Documents\Survey_Eqpm\SiteSurveyData.xlsx"
Dim strFile As String
Dim strFileList() As String
Dim intFile As Integer
Sub Sample() '<~~ You are missing this...
strFile = Dir(strPath & "*.xls")
'~~> Rest of your code
End Sub
I know this is an old question, but I came across it in a google search and realized that you already have the .xlsx extension in the strPath variable, but you add it to the string variable, strFile, also.
Const strPath As String = "C:\Users\cparson\Documents\Survey_Eqpm\SiteSurveyData.xlsx"
strFile = Dir(strPath & "*.xls")
I might be wrong, but just wanted to point it out.
You can try too ADO, it's a easy way in my opnion
YourConnObj.execute "SELECT * INTO YourTableName from [Excel 14.0;DATABASE=c:\temp\data copy.xlsx].[Sheet1]"