as stated in my question. I'm trying to have connection to a virtual machine remotely without enabling virtualbox remote desktop screen. using the network host only. but I could not make this connection without having to enable the option on the screen.
according to my research it is possible because applications as Andy or genymotion does this.
if anyone knows the subject. appreciate your help
Related
I'm using vmware workstation 14 Player, there is no option for Virtual Network Editor in VMPlayer. There are several sites which are saying to open the network editor. As I could not find network editor I'm using VM Player 14. Please view the screenshot for better understating.
Here you can see there is no option for network editor and when I click edit virtual machine setting I get the following Box
Here you can see I've selected NAT, but still internet is not working inside VMware. If anyone could help with this.
I was following this video but https://www.youtube.com/watch?v=H2j3nyl4muQ
but here the person is usning VMware and not the vmware workstation player.
Inside preferences I see the following but nothing related to network settings etc
Inside my virtual machine which is a Windows Server 2012 the network adapter shows the following
To do what the video follows up is much better to do it in VirtualBox. Configuring your own NAT is quite easily done, whereas in new VmWare I still have not found a way to do it.
Check this to understand better how to do it.
I would like to ask about the way how to establish remote connection to Linux based embedded device in the field.
I have a small linux board I want to place in remote location. It has an internet access through ethernet. Than I have a Linux server with public IP to be able to tunnel connection.
And finally, I want to connect from my PC to this device.
I don't feel yet competent enough to code my own tcp sockets etc. to reroute the connection :) So what would be the easiest way to do that only with available linux tools? And BusyBox toolset on endpoints.
Thank's a lot!
I think that using OpenVPN would be a easy way to tunnel to the device. You can cross compile it and set it up as a client on the embedded device. Then you install it on your Linux box and set it up as a server.
Finally you install it on your work PC and set up as a client there.
It gives you a virtual network where all clients can talk to each other like they would be on a local network.
I have been trying to setup a Win7 VM on Hyper-v that connects to the internet through my Win 8 host machine.
I can't seem to figure out why the VM can't ever get passed limited connectivity. Any ideas?
NO sure why but all I had to do was Disable/enable the vEthernet adapter and everything worked great!
Check that you have a Virtual Switch with an "External Network" using the Virtual Switch Manager.
The other network types offer VM isolation. If your VM is on an "Private Network" it can only talk to other VMs on the server. The "Internal Network" allows VMs can talk to other VMs and to the host.
In contrast, an External Network allows the VM to contact machines on the network that the host is attached to.
I worked on this issue for a while myself after upgrading to Windows 8.1 and losing connectivity. Added and removed the adapter to no avail. The solution was to upgrade the VM's Integration Services.
I had the same issue because my DHCP settings on my guest VM was setup wrong.
So check the DHCP setting if they are on obtain automatically.
Control Panel\Network and Internet\Network Connections
Network adapter properties -> Internet Protocol Version 4 (TCP/IPv4) -> Properties ->
Obtain DNS server address automatically
I have had great success with Hyper-V and windows 8 and windows 10 virtuals using external switches with a Windows 8.1 host. Unfortunately I could not get the external switch to ever work on windows xp virtual running under Hyper-V. Instead, after reading a lot of sites/suggestions, I followed this guide to bridge an internal virtual switch (with Hyper-V legacy network adapter for XP) to the host wifi. I hope this saves someone else some time when working on an XP virtual.
Using Hyper-V with a Wireless Network Adapter
I have installed windows phone 8 SDK and tried running a simple app which embeds a WebBrowser on a page. When I try to run the app in emulator the emulator does not get internet connection. It displays an error message saying "You don't have permission to modify internal Hyper-V network adapter settings required to run the emulator". Im sure my login has admin permissions. My machine is 64bit, hyper v is enabled and Hyper v manager is running, hardware virtualization is enabled in the BIOS settings, DHCP is enabled and its connected to a wired network. I have checked all the system requirements. What ever I do it keeps on giving the same error message. I setup everything in a different machine and tried running the app in that machine. The same error message is displayed in the that machine also. Can anyone tell me how to get it working.
DHCP is enabled and its connected to a wired network
Can you run ipconfig /all on your host machine and post it here please?
seems you have problem with your DHCP or maybe multiple DHCP and conflict.
You need to add your user account as a member of the "Hyper-V Administrators" group on the machine.
Detailed steps:
Hit Windows key + Q and search for "local users and groups". Change the search scope to "Settings". Click "Edit local users and groups".
Expand the "Groups" section. Right-click on "Hyper-V Administrators" and select "Add to group".
Add your user account.
Some connection tools on the host can have negative effects when used with the emulator; I found having cisco VPN client installed on the host prevented the emulator from finding the internet. Other VPN clients may have similar side-effects. I simply uninstalled cisco (the inbuilt windows VPN is fine for what I need) and it worked perfectly.
I've also seen problems where it won't find the internet after the host has been suspended / resumed. In that scenario, it turned out to be bad network drivers. I installed a dedicated Intel NIC (rather than the on-board NIC on the motherboard) - problem solved.
Basically, Hyper-V is a bit fussy.
try refreshing the hyper-v by unchecking and then checking it again,this worked for me.
Steps:
1.control panel>>programs>>Programs and features>>turn windows features on and off>>hyper-v
2.uncheck it and restart the pc.
3.again go to control panel an check hyper-v and restart the pc again.
the try to run the emulator,should work..
another possible reason is that you did not start vs2013 as admin
I am using Hyper-V for the first time (running Windows 8). When I create a new virtual network switch, external, it bridges the VMs network adapter with the WiFi - and that for some reason kills the WiFi's internet connection. Why, and what could I be doing wrong?
Thanks,
A.
If you have VirtualBoxinstalled, check if any of the Hyper-V virtual adapters/bridge connection has the VirtualBox Bridged Networking Driver ticked in the connection properties. If they do, simply untick this service where it is present and this should fix it up for you. No need to uninstall VirtualBox.
I had a static ip-address in my ethernet adapter.
Removed the static entry.
Made my external virtual switch.
Had the extra vEthernet adapter, made my static entries (ip-address, dns-server) in this adapter.
Everything is working fine now.
Chris
I had the same problem, it takes a couple of seconds to setup the connection again. Check this tutorial: https://superuser.com/questions/469806/windows-8-hyper-v-how-to-give-vm-internet-access
I just ran into the same problem, losing the internet connection when creating the virtual switch. Uninstalling VirtualBox which I had installed at the same time fixed the problem for me (just disabling the VBox adapters was not enough), so they seem to be unable to happily coexist.
I ran into the same problem recently when creating an external switch in Hyper-V. Long story short, every time an external switch was created, it would bring my ethernet connection down on my host laptop. I had wifi connection option also but disabled it to just strictly troubleshoot the ethernet network adapter.
I brought down the VM, once turned off, deleted the external network adapter from hyper V virtual switch manager. On the host machine, disabled and re-enabled the network adapter from within network connections (ethernet). Once connected, I brought the VM back online FIRST, then created the external switch second which connected with no issues. Verified I was able to access outside world aka internet on both host and VM.
Maybe you unchecked by accident the Allow management OS to share this network adapter setting that is enabled by default. Disabling this setting will leave your hypervisor OS without network connectivity.
I was able to fix such an issue by disabling Internet sharing on the wireless adapter, creating an Internal virtual switch in Hyper-V first, then disabling VMWare bridge on all involved interfaces, then I made a bridge in Network sharing center by selecting my internal switch and Wi-Fi adapter and after that I was able to select external network in Virtual switch manager in Hyper-V
I ran into the same problem too. I don't know for sure, but after trying all of the solutions above and any others I could find, I renamed my virtual switch to 'realtek' (the type of network card I have installed) instead of taking the default name that I think was 'new virtual switch'. Something else I did may have solved the problem (I modified everything I could find for two days), but I think renaming it is what finally gave me internet access to the vm.