I am TomEE administrator and i wanted my application team to package resource configuration inside of their application, i.e. /META-INF/context.xml. Apparently this not working with TomEE, i know its working for my other Tomcat applications.
While doing so the i am getting "Unable to find the DataSource" exception.
I know some people recommended to put resource config in ../conf/tomee.xml. But i want application team to put inside war file so we can enable automation and all AD team has to do is deploy war file.
add deployXML and copyXML attribute to Host element in server.xml and set their value to true as followed
<Host appBase="webapps" autoDeploy="true" copyXML="true" deployXML="true" name="localhost" unpackWARs="true" xmlBase="conf/Catalina/localhost">
Related
I setup a local JBoss/Wildfly server launch configuraiton in Intellij Idea. When I attempt to start the server, the configuration panel pops up and shows following error.
Error: HTTP connector is not enabled for server profile
I could not find anything in the Idea help what this means and how to fix it. The server is a keycloak distro but is just plain wildfly 10 with an extra subsystem.
Has anyone seen this before and knows how to fix the error?
I can't reproduce this with fresh installation of keycloak 3.2.1 from here
IDEA looks for the 2 following xpath's searching for a HTTP connector settings:
"/ns:server/ns:profile/*[local-name()='subsystem']/*[local-name()='server']/*[local-name()='http-listener'][#*[local-name()='socket-binding' and .='http']]",
"/ns:server/ns:profile/*[local-name()='subsystem']/*[local-name()='connector'][#*[local-name()='socket-binding' and .='http']]"};
For me playing with the fresh keycloak distribution the first xpath hits at the following markup:
<subsystem xmlns="urn:jboss:domain:undertow:3.0">
<buffer-cache name="default"/>
<server name="default-server">
<http-listener name="default" socket-binding="http" redirect-socket="https"/>
Please check your configuration around this place.
If this does not help, please attach your standalone.xml or at least the relevant part of it.
In my case changing of 'JRE' from 'Default' to explicit one (Even though it was the same as it was in parentheses in the default version) solved the problem.
As far as my knowledge of Endeca goes, any time you want to add a new dgraph definition in your Endeca configuration, you have to run initializeServices.sh to set the updated configuration on EAC.
I was wondering if there is any way I can do that without running initalizeServices.sh (since it does a lot more than just update the list of Dgraph registered in EAC, and I want to prevent that).
I found the command ./runcommand.sh --update-definition allows you to do configuration changes to a Dgraph, which has already been registered with EAC, but if I add a new dgraph in config and run the command it fails with below error:
[11.17.16 16:00:07] INFO: Setting definition for host 'MDEXLiveHost2'.
[11.17.16 16:00:07] SEVERE: Caught an exception while checking provisioning
Caused by com.endeca.soleng.eac.toolkit.exception.EacCommunicationException
com.endeca.soleng.eac.toolkit.host.Host setDefinition - Caught exception while setting host definition.
Caused by com.endeca.eac.client.ProvisioningFault
sun.reflect.NativeConstructorAccessorImpl newInstance0 - null
I can't find any detailed logs of this error being generated anywhere in PlatformServices logs to further debug.
I could, however see in request log that /eac/ProvisioningService gave a HTTP code of 500, which leads me to believe that the script is trying to find current configuration of MDEXLiveHost2 and is unable to find it.
EDITED TO ADD Configuration for:
New host:
<host id="MDEXLiveHost2" hostName="${mdexLive.host2}" port="${mdexLive.eac.port}" useSsl="false" />
New Dgraph:
<dgraph id="DgraphLive2" host-id="MDEXLiveHost2" port="${dgraphLive1.port}"
post-startup-script="LiveDgraphPostStartup">
<properties>
<property name="restartGroup" value="A" />
<property name="updateGroup" value="a" />
<property name="DgraphContentGroup" value="Live" />
</properties>
<log-dir>./logs/dgraphs/DgraphLive</log-dir>
<input-dir>./data/dgraphs/DgraphLive/dgraph_input</input-dir>
<update-dir>./data/dgraphs/DgraphLive/dgraph_input/updates</update-dir>
</dgraph>
EDITED TO ADD errors after manually adding host using eaccmd.sh
Host definition file:
<host host-id="MDEXLiveHost2" host-name="172.18.0.7" port="9999" useSsl="false"/>
The host is added successfully (validated via describe-app)
$./eaccmd.sh describe-app --app myapp | grep MDEXLiveHost2
<host host-name="172.18.0.7" port="9999" host-id="MDEXLiveHost2" useSsl="false">
But, running any command I get this error:
[11.18.16 11:00:58] INFO: Updating provisioning for host 'MDEXLiveHost2'.
[11.18.16 11:00:58] INFO: Host name of host 'MDEXLiveHost2' has changed from 172.18.0.7 to 172.18.0.7 . Components on this host will be re-provisioned.
[11.18.16 11:00:58] INFO: Updating definition for host 'MDEXLiveHost2'.
[11.18.16 11:00:58] SEVERE: Caught an exception while checking provisioning.
Caused by com.endeca.soleng.eac.toolkit.exception.EacCommunicationException
com.endeca.soleng.eac.toolkit.host.Host updateEacDefinition - Caught exception while updating host definition.
Caused by com.endeca.eac.client.ProvisioningFault
sun.reflect.NativeConstructorAccessorImpl newInstance0 - null
If only this error could be made more verbose, that might give some help.
You do not have to run initializeServices.sh for every configuration change you make. When you execute other scripts in the control folder, they first check if there are any configuration changes and apply these changes.
As far as the error is concerned, I suspect you either didn't specify the MDEXLiveHost2 in your LiveDGraphCluster.xml or the host that you did specify is not reachable. Verify your configuration.
Lastly your approach to dynamically add more DGraphs into the cluster is not standard practice. When you configure your environment you should do a load test using ENEPerf to simulate the load and then create as many DGraphs and hosts as required. If you are adding more hosts and DGraphs dynamically, you also need to ensure that you add them, dynamically, into your load balancer configuration as well.
My first guess was that maybe the mdex host 2 didn't have Platform services/Mdex installed and Platform services running but it may be that the port you specified is incorrect.
<host host-id="MDEXLiveHost2" host-name="172.18.0.7" port="9999" useSsl="false"/>
Is your eac port 9999 and not 8888 (OOB value)? If it is 9999 on your ITL server, you want to make sure that it is also set to 9999 on your new Dgraph server.
I am trying to setup Keycloak with Tomcat 8.
I followed the instruction carefully. I downloaded the Client Adapter for Tomcat8 and copied all the jar into $CATALINA_HOME/lib directory. I modified my web.xml login-config to use KEYCLOAK. Yet when I started Tomcat I kept getting Severe Error Unknown Authenticator??
Anywhere I googled everyone said you have to install the Client Adapter but.. in my case IT IS ALREADY THERE!!! HELP!!
I think you forgot to create a META-INF directory beside the WEB-INF and put a file named context.xml into it:
The contents of this file has to be
<?xml version="1.0" encoding="UTF-8"?>
<Context>
<Valve className="org.keycloak.adapters.tomcat.KeycloakAuthenticatorValve"/>
</Context>
This is not needed if you deploy the war into WildFly. I had the same problem when I tried to transfer a well working webApp from WildFly to Tomcat.
We have an app that is being deployed as an ear. Within this ear, there is a war that needs to use a specific security domain.
To achieve this, we have configured the standalone-full-ha.xml with the following security section
<security-domain name="ourDomain" cache-type="default">
<authentication>
<login-module code="blah.blah.OurDomain" flag="required" />
</authentication>
</security-domain>
ear/war/WEB-INF/jboss-web.xml is configured as follows:
<?xml version="1.0" encoding="UTF-8"?>
<jboss-web>
<security-domain>Quark</security-domain>
<disable-audit>true</disable-audit>
</jboss-web>
With this configuration, the app tries to authenticate against the "other" domain which is there in JBoss by default.
log entries as follows:
TRACE [org.jboss.security] (http-/127.0.0.1:8080-6) PBOX000224: End getAppConfigurationEntry(other), AuthInfo: AppConfigurationEntry[]:
[0]
LoginModule Class: org.jboss.as.security.remoting.RemotingLoginModule
ControlFlag: LoginModuleControlFlag: optional
Options:
name=password-stacking, value=useFirstPass
[1]
LoginModule Class: org.jboss.as.security.RealmDirectLoginModule
ControlFlag: LoginModuleControlFlag: required
Options:
name=password-stacking, value=useFirstPass
When trying to define this as part of the ear in ear/META-INF/jboss-app.xml, that made the whole thing blow up pretty spectacularly - so figured that was less likely to be the way to resolve this.
If the default security domain is changed to ourDomain however, it all works as expected.
This doesn't seem to be a big deal - however, it feels better to be able to leave as much of the configuration in the app as possible.
Any pointers to resolve this appreciated.
Your security domain name specified in jboss-web.xml needs to match the name of some security domain in your JBoss config, in your case the web descriptor specifies Quark while the security subsystem defined domain named ourDomain.
Whenever JBoss can not find the security domain you request in your jboss-web.xml, it will fallback to the default security domain, which in case of 7.x is named other.
I am trying to redeploy an Axis2 web service in a remote server. I am doing this by uploading the .aar file from the axis2 admin console.
I know 'hot update' is disabled by default. So I tried adding the following line to the services.xml file:
<parameter name="hotdeployment" >true</parameter>
<parameter name="hotupdate" >true</parameter>
However, the redeployment was not successful.
I also dont have permission to restart the server.
Can anyone let me know the right way to do this ?
Thanks!
This settings located in axis2.xml, You should set there.
Standalone Axis2 server:
$AXIS_HOME/conf/axis2.xml
In war file:
WEB-INF/conf/axis2.xml