Suppose I have an sql query like the following (I realize this query could be written better, just bear with me):
SELECT aT.NAME
FROM anothertable aT,
( SELECT ts.slot_id,
tgm.trans_id,
tagm.agent_id
FROM slots ts,
transactions tgm,
agents tagm
WHERE ts.slot_id = (12345, 678910)
and ts.slot_id = tagm.slot_id
AND ts.slot_id = tgm.slot_id) INNER
WHERE INNER.trans_id = aT.trans_id
AND INNER.agent_id = aT.trans_id
Now suppose that I need to break up this query into two parts...in the first I'll execute the inner query, do some processing on the results in code, and then pass back a reduced set to the outer part of the query. The question is, is there an easy way to emulate an inner table in sql?
For instance, if the results of the inner query returned 5 rows but my program deems to only need two of those rows, how can I write sql that will do what I am trying to do below? Is there a way, in sql, to declare a table for in memory in query use?
SELECT
at.Name
FROM
anotherTable aT,
(SLOT_ID, TRANS_ID, AGENT_ID
-------------------------
230743, 3270893, 2307203
078490, 230897, 237021) inner
WHERE
inner.trans_id = at.trans_id
AND INNER.agent_id = aT.trans_id
Just use a subquery:
SELECT at.Name
FROM anotherTable aT JOIN
(select 230743 as SLOT_ID, 3270893 as TRANS_ID, 2307203 as AGENT_ID from dual
select 078490, 230897, 237021 from dual
) i
on i.trans_id = at.trans_id AND i.agent_id = aT.trans_id;
Most systems will let you define a TEMP TABLE or TABLE VARIABLE: https://www.simple-talk.com/sql/t-sql-programming/temporary-tables-in-sql-server/
CREATE TABLE #temp (
SLOT_ID INT,
TRANS_ID INT,
AGENT_ID INT
);
INSERT INTO #temp(SLOT_ID, TRANS_ID, AGENT_ID)
(--inner query goes here)
--do your main query, then:
DROP TABLE #temp
IN MS SQL Server (not sure about other systems), you could possibly use a Common Table Expression (CTE): https://technet.microsoft.com/en-us/library/ms190766%28v=sql.105%29.aspx
WITH inner AS (
--inner query goes here
)
--main select goes here
Personally, since I generally work with MSSQL Server, I use CTE's quite a bit, as they can be created "on the fly", and can be a big help in organizing more complex queries.
The subquery method worked. Since this is Oracle, the syntax turned out to be:
SELECT aT.Name
FROM anotherTable aT,
(select 1907945 as SLOT_ID, 2732985 as TRANS_ID, 40157 as AGENT_ID FROM DUAL
union
select 1907945, 2732985, 40187 FROM DUAL
) inner
WHERE
inner.trans_id = aT.trans_id AND INNER.agent_id = aT.trans_id;
Related
Learning SQL now, not particular big of temp table, since you have to drop each time you run your query. Basically this query below pulls info from patientinfo table and put into a temp table, then can be used to possibly join with another table Anyway to modify this query, so I don't need to use temp tables? Like I mean anyway to pull info from the table without a temp table, like that part where I commented out (into)
SELECT PatientCode [Code]
, PatientID [Pltid]
, CASE WHEN PatientStatus = 'R' THEN 'lefthospital'
WHEN PatientStatus = 'I' THEN 'StillIn'
ELSE 'unknown' END [CDStatus]
INTO #PatientInfoPull
FROM PatientInfo
SELECT PatientInfo.*
FROM #initCDPull
this query below pulls info from patientinfo table and put into a temp table, then can be used to possibly join with another table
Okay, you're doing something like this:
SELECT <fields>
INTO #SomeTemp
FROM SomeReal
WHERE SomeColumn = 'SomeValue'
SELECT *
FROM SomeOtherReal r
JOIN #SomeTemp t ON r.SomeOtherColumn = t.SomeOtherColumn
In that case, you can use a sub-query (formally: "Derived Table") like this:
SELECT *
FROM SomeOtherReal r
JOIN (
SELECT <fields>
FROM SomeReal
WHERE SomeColumn = 'SomeValue'
) t ON r.SomeOtherColumn = t.SomeOtherColumn
or a Common Table Expression (CTE) like this:
WITH t AS (
SELECT <fields>
FROM SomeReal
WHERE SomeColumn = 'SomeValue'
)
SELECT *
FROM SomeOtherReal r
JOIN t ON r.SomeOtherColumn = t.SomeOtherColumn
Even more than that, you can usually combine the steps like this:
SELECT t.<fields>, r.<fields>
FROM SomeOtherReal r
JOIN SomeReal t ON t.SomeOtherColumn = r.SomeOtherColumn
WHERE t.SomeColumn = 'SomeValue'
I have a query that is using a temp table to insert some data then another select from to extract distinct results. That query by it self was fine but now with entity-framework it is causing all kinds of unexpected errors at the wrong time.
Is there any way I can rewrite the query not to use a temp table? When this is converted into a stored procedure and in entity framework the result set is of type int which throws an error:
Could not find an implementation of the query pattern Select not found.
Here is the query
Drop Table IF EXISTS #Temp
SELECT
a.ReceiverID,
a.AntennaID,
a.AntennaName into #Temp
FROM RFIDReceiverAntenna a
full join Station b ON (a.ReceiverID = b.ReceiverID) and (a.AntennaID = b.AntennaID)
where (a.ReceiverID is NULL or b.ReceiverID is NULL)
and (a.AntennaID IS NULL or b.antennaID is NULL)
select distinct r.ReceiverID, r.ReceiverName, r.receiverdescription
from RFIDReceiver r
inner join #Temp t on r.ReceiverID = t.ReceiverID;
No need for anything fancy, you can just replace the reference to #temp with an inner sub-query containing the query that generates #temp e.g.
select distinct r.ReceiverID, r.ReceiverName, r.receiverdescription
from RFIDReceiver r
inner join (
select
a.ReceiverID,
a.AntennaID,
a.AntennaName
from RFIDReceiverAntenna a
full join Station b ON (a.ReceiverID = b.ReceiverID) and (a.AntennaID = b.AntennaID)
where (a.ReceiverID is NULL or b.ReceiverID is NULL)
and (a.AntennaID IS NULL or b.antennaID is NULL)
) t on r.ReceiverID = t.ReceiverID;
PS: I haven't made any effort to improve the query overall like Gordon has but do consider his suggestions.
First, a full join makes no sense in the first query. You are selecting only columns from the first table, so you need that.
Second, you can use a CTE.
Third, you should be able to get rid of the SELECT DISTINCT by using an EXISTS condition.
I would suggest:
WITH ra AS (
SELECT ra.*
FROM RFIDReceiverAntenna ra
Station s
ON s.ReceiverID = ra.ReceiverID AND
s.AntennaID = ra.AntennaID)
WHERE s.ReceiverID is NULL
)
SELECT r.ReceiverID, r.ReceiverName, r.receiverdescription
FROM RFIDReceiver r
WHERE EXISTS (SELECT 1
FROM ra
WHERE r.ReceiverID = ra.ReceiverID
);
You can use CTE instead of the temp table:
WITH
CTE
AS
(
SELECT
a.ReceiverID,
a.AntennaID,
a.AntennaName
FROM
RFIDReceiverAntenna a
full join Station b
ON (a.ReceiverID = b.ReceiverID)
and (a.AntennaID = b.AntennaID)
where
(a.ReceiverID is NULL or b.ReceiverID is NULL)
and (a.AntennaID IS NULL or b.antennaID is NULL)
)
select distinct
r.ReceiverID, r.ReceiverName, r.receiverdescription
from
RFIDReceiver r
inner join CTE t on r.ReceiverID = t.ReceiverID
;
This query will return the same results as your original query with the temp table, but its performance may be quite different; not necessarily slower, it can be faster. Just something that you should be aware about.
I have a simple SQL table containing some values, for example:
id | value (table 'values')
----------
0 | 4
1 | 7
2 | 9
I want to iterate over these values, and use them in a query like so:
SELECT value[0], x1
FROM (some subquery where value[0] is used)
UNION
SELECT value[1], x2
FROM (some subquery where value[1] is used)
...
etc
In order to get a result set like this:
4 | x1
7 | x2
9 | x3
It has to be in SQL as it will actually represent a database view. Of course the real query is a lot more complicated, but I tried to simplify the question while keeping the essence as much as possible.
I think I have to select from values and join the subquery, but as the value should be used in the subquery I'm lost on how to accomplish this.
Edit: I oversimplified my question; in reality I want to have 2 rows from the subquery and not only one.
Edit 2: As suggested I'm posting the real query. I simplified it a bit to make it clearer, but it's a working query and the problem is there. Note that I have hardcoded the value '2' in this query two times. I want to replace that with values from a different table, in the example table above I would want a result set of the combined results of this query with 4, 7 and 9 as values instead of the currently hardcoded 2.
SELECT x.fantasycoach_id, SUM(round_points)
FROM (
SELECT DISTINCT fc.id AS fantasycoach_id,
ffv.formation_id AS formation_id,
fpc.round_sequence AS round_sequence,
round_points,
fpc.fantasyplayer_id
FROM fantasyworld_FantasyCoach AS fc
LEFT JOIN fantasyworld_fantasyformation AS ff ON ff.id = (
SELECT MAX(fantasyworld_fantasyformationvalidity.formation_id)
FROM fantasyworld_fantasyformationvalidity
LEFT JOIN realworld_round AS _rr ON _rr.id = round_id
LEFT JOIN fantasyworld_fantasyformation AS _ff ON _ff.id = formation_id
WHERE is_valid = TRUE
AND _ff.coach_id = fc.id
AND _rr.sequence <= 2 /* HARDCODED USE OF VALUE */
)
LEFT JOIN fantasyworld_FantasyFormationPlayer AS ffp
ON ffp.formation_id = ff.id
LEFT JOIN dbcache_fantasyplayercache AS fpc
ON ffp.player_id = fpc.fantasyplayer_id
AND fpc.round_sequence = 2 /* HARDCODED USE OF VALUE */
LEFT JOIN fantasyworld_fantasyformationvalidity AS ffv
ON ffv.formation_id = ff.id
) x
GROUP BY fantasycoach_id
Edit 3: I'm using PostgreSQL.
SQL works with tables as a whole, which basically involves set operations. There is no explicit iteration, and generally no need for any. In particular, the most straightforward implementation of what you described would be this:
SELECT value, (some subquery where value is used) AS x
FROM values
Do note, however, that a correlated subquery such as that is very hard on query performance. Depending on the details of what you're trying to do, it may well be possible to structure it around a simple join, an uncorrelated subquery, or a similar, better-performing alternative.
Update:
In view of the update to the question indicating that the subquery is expected to yield multiple rows for each value in table values, contrary to the example results, it seems a better approach would be to just rewrite the subquery as the main query. If it does not already do so (and maybe even if it does) then it would join table values as another base table.
Update 2:
Given the real query now presented, this is how the values from table values could be incorporated into it:
SELECT x.fantasycoach_id, SUM(round_points) FROM
(
SELECT DISTINCT
fc.id AS fantasycoach_id,
ffv.formation_id AS formation_id,
fpc.round_sequence AS round_sequence,
round_points,
fpc.fantasyplayer_id
FROM fantasyworld_FantasyCoach AS fc
-- one row for each combination of coach and value:
CROSS JOIN values
LEFT JOIN fantasyworld_fantasyformation AS ff
ON ff.id = (
SELECT MAX(fantasyworld_fantasyformationvalidity.formation_id)
FROM fantasyworld_fantasyformationvalidity
LEFT JOIN realworld_round AS _rr
ON _rr.id = round_id
LEFT JOIN fantasyworld_fantasyformation AS _ff
ON _ff.id = formation_id
WHERE is_valid = TRUE
AND _ff.coach_id = fc.id
-- use the value obtained from values:
AND _rr.sequence <= values.value
)
LEFT JOIN fantasyworld_FantasyFormationPlayer AS ffp
ON ffp.formation_id = ff.id
LEFT JOIN dbcache_fantasyplayercache AS fpc
ON ffp.player_id = fpc.fantasyplayer_id
-- use the value obtained from values again:
AND fpc.round_sequence = values.value
LEFT JOIN fantasyworld_fantasyformationvalidity AS ffv
ON ffv.formation_id = ff.id
) x
GROUP BY fantasycoach_id
Note in particular the CROSS JOIN which forms the cross product of two tables; this is the same thing as an INNER JOIN without any join predicate, and it can be written that way if desired.
The overall query could be at least a bit simplified, but I do not do so because it is a working example rather than an actual production query, so it is unclear what other changes would translate to the actual application.
In the example I create two tables. See how outer table have an alias you use in the inner select?
SQL Fiddle Demo
SELECT T.[value], (SELECT [property] FROM Table2 P WHERE P.[value] = T.[value])
FROM Table1 T
This is a better way for performance
SELECT T.[value], P.[property]
FROM Table1 T
INNER JOIN Table2 p
on P.[value] = T.[value];
Table 2 can be a QUERY instead of a real table
Third Option
Using a cte to calculate your values and then join back to the main table. This way you have the subquery logic separated from your final query.
WITH cte AS (
SELECT
T.[value],
T.[value] * T.[value] as property
FROM Table1 T
)
SELECT T.[value], C.[property]
FROM Table1 T
INNER JOIN cte C
on T.[value] = C.[value];
It might be helpful to extract the computation to a function that is called in the SELECT clause and is executed for each row of the result set
Here's the documentation for CREATE FUNCTION for SQL Server. It's probably similar to whatever database system you're using, and if not you can easily Google for it.
Here's an example of creating a function and using it in a query:
CREATE FUNCTION DoComputation(#parameter1 int)
RETURNS int
AS
BEGIN
-- Do some calculations here and return the function result.
-- This example returns the value of #parameter1 squared.
-- You can add additional parameters to the function definition if needed
DECLARE #Result int
SET #Result = #parameter1 * #parameter1
RETURN #Result
END
Here is an example of using the example function above in a query.
SELECT v.value, DoComputation(v.value) as ComputedValue
FROM [Values] v
ORDER BY value
I have a query like the following
select *
from (
select *
from callTableFunction(#paramPrev)
.....< a whole load of other joins, wheres , etc >........
) prevValues
full join
(
select *
from callTableFunction(#paramCurr)
.....< a whole load of other joins, wheres , etc >........
) currValues on prevValues.Field1 = currValues.Field1
....<other joins with the same subselect as the above two with different parameters passed in
where ........
group by ....
The following subselect is common to all the subselects in the query bar the #param to the table function.
select *
from callTableFunction(#param)
.....< a whole load of other joins, wheres , etc >........
One option is for me to convert this into a function and call the function, but i dont like this as I may be changing the
subselect query quite often for.....or I am wondering if there is an alternative using CTE
like
with sometable(#param1) as
(
select *
from callTableFunction(#param)
.....< a whole load of other joins, wheres , etc >........
)
select
sometable(#paramPrev) prevValues
full join sometable(#currPrev) currValues on prevValues.Field1 = currValues.Field1
where ........
group by ....
Is there any syntax like this or technique I can use like this.
This is in SQL Server 2008 R2
Thanks.
What you're trying to do is not supported syntax - CTE's cannot be parameterised in this way.
See books online - http://msdn.microsoft.com/en-us/library/ms175972.aspx.
(values in brackets after a CTE name are an optional list of output column names)
If there are only two parameter values (paramPrev and currPrev), you might be able to make the code a little easier to read by splitting them into two CTEs - something like this:
with prevCTE as (
select *
from callTableFunction(#paramPrev)
.....< a whole load of other joins, wheres , etc
........ )
,curCTE as (
select *
from callTableFunction(#currPrev)
.....< a whole load of other joins, wheres , etc
........ ),
select
prevCTE prevValues
full join curCTE currValues on
prevValues.Field1 = currValues.Field1 where
........ group by
....
You should be able to wrap the subqueries up as parameterized inline table-valued functions, and then use them with an OUTER JOIN:
CREATE FUNCTION wrapped_subquery(#param int) -- assuming it's an int type, change if necessary...
RETURNS TABLE
RETURN
SELECT * FROM callTableFunction(#param)
.....< a whole load of other joins, wheres , etc ........
GO
SELECT *
FROM
wrapped_subquery(#paramPrev) prevValues
FULL OUTER JOIN wrapped_subquery(#currPrev) currValues ON prevValues.Field1 = currValues.Field1
WHERE ........
GROUP BY ....
After failing to assign scalar variables before with, i finally got a working solution using a stored procedure and a temp table:
create proc hours_absent(#wid nvarchar(30), #start date, #end date)
as
with T1 as(
select c from t
),
T2 as(
select c from T1
)
select c from T2
order by 1, 2
OPTION(MAXRECURSION 365)
Calling the stored procedure:
if object_id('tempdb..#t') is not null drop table #t
create table #t([month] date, hours float)
insert into #t exec hours_absent '9001', '2014-01-01', '2015-01-01'
select * from #t
There may be some differences between my example and what you want depending on how your subsequent ON statements are formulated. Since you didn't specify, I assumed that all the subsequent joins were against the first table.
In my example I used literals rather than #prev,#current but you can easily substitute variables in place of literals to achieve what you want.
-- Standin function for your table function to create working example.
CREATE FUNCTION TestMe(
#parm int)
RETURNS TABLE
AS
RETURN
(SELECT #parm AS N, 'a' AS V UNION ALL
SELECT #parm + 1, 'b' UNION ALL
SELECT #parm + 2, 'c' UNION ALL
SELECT #parm + 2, 'd' UNION ALL
SELECT #parm + 3, 'e');
go
-- This calls TestMe first with 2 then 4 then 6... (what you don't want)
-- Compare these results with those below
SELECT t1.N AS AN, t1.V as AV,
t2.N AS BN, t2.V as BV,
t3.N AS CN, t3.V as CV
FROM TestMe(2)AS t1
FULL JOIN TestMe(4)AS t2 ON t1.N = t2.N
FULL JOIN TestMe(6)AS t3 ON t1.N = t3.N;
-- Put your #vars in place of 2,4,6 adding select statements as needed
WITH params
AS (SELECT 2 AS p UNION ALL
SELECT 4 AS p UNION ALL
SELECT 6 AS p)
-- This CTE encapsulates the call to TestMe (and any other joins)
,AllData
AS (SELECT *
FROM params AS p
OUTER APPLY TestMe(p.p)) -- See! only coded once
-- Add any other necessary joins here
-- Select needs to deal with all the columns with identical names
SELECT d1.N AS AN, d1.V as AV,
d2.N AS BN, d2.V as BV,
d3.N AS CN, d3.V as CV
-- d1 gets limited to values where p = 2 in the where clause below
FROM AllData AS d1
-- Outer joins require the ANDs to restrict row multiplication
FULL JOIN AllData AS d2 ON d1.N = d2.N
AND d1.p = 2 AND d2.p = 4
FULL JOIN AllData AS d3 ON d1.N = d3.N
AND d1.p = 2 AND d2.p = 4 AND d3.p = 6
-- Since AllData actually contains all the rows we must limit the results
WHERE(d1.p = 2 OR d1.p IS NULL)
AND (d2.p = 4 OR d2.p IS NULL)
AND (d3.p = 6 OR d3.p IS NULL);
What you want to do is akin to a pivot and so the complexity of the needed query is similar to creating a pivot result without using the pivot statement.
Were you to use Pivot, duplicate rows (such as I included in this example) would be aggreagted. This is also a solution for doing a pivot where aggregation is unwanted.
INSERT INTO files (fileUID, filename)
WITH fileUIDS(fileUID) AS
( VALUES(1) UNION ALL
SELECT fileUID+1 FROM fileUIDS WHERE fileUID < 1000 )
SELECT fileUID,
TRANSLATE ( CHAR(BIGINT(RAND() * 10000000000 )), 'abcdefgHij', '1234567890' )
FROM fileUIDS;
The WITH syntax is the same as using either a local temp table or inline view. To my knowledge, it's only supported in SQL Server (2005+, called Common Table Expressions) and Oracle (9i+, called Subquery Factoring). The intended use is for creating a basic view that is used (ie: joined to) multiple times in a single query.
Here's a typical example:
WITH example AS (
SELECT q.question_id,
t.tag_name
FROM QUESTIONS q
JOIN QUESTION_TAG_XREF qtf ON qtf.question_id = t.question_id
JOIN TAGS t ON t.tag_id = qtf.tag_id)
SELECT t.title,
e1.tag_name
FROM QUESTIONS t
JOIN example e1 ON e1.question_id = t.question_id
...which will return identical results if you use:
SELECT t.title,
e1.tag_name
FROM QUESTIONS t
JOIN (SELECT q.question_id,
t.tag_name
FROM QUESTIONS q
JOIN QUESTION_TAG_XREF qtf ON qtf.question_id = t.question_id
JOIN TAGS t ON t.tag_id = qtf.tag_id) e1 ON e1.question_id = t.question_id
The example you provided:
WITH fileUIDS(fileUID) AS (
VALUES(1)
UNION ALL
SELECT t.fileUID+1
FROM fileUIDS t
WHERE t.fileUID < 1000 )
INSERT INTO files
(fileUID, filename)
SELECT f.fileUID,
TRANSLATE ( CHAR(BIGINT(RAND() * 10000000000 )), 'abcdefgHij', '1234567890' )
FROM fileUIDS f;
...is a recursive one. It's starting at 1, generating 999 fileuids in total (it would be 1,000 if it had started at 0).
WITH x AS (...)
This will take the output of the ... and treat it as a table named x, temporarily.
WITH x AS (...)
SELECT * FROM x
This statement will essentially give you the exact same thing as the ... outputs but it will instead be referenced as the table x
The WITH word is used to create a Common Table Expression (CTE). In this case, it's creating an inline table that the "select fileUID, ..." part is pulling data from.
It is creating CTE (Common Table Expression). This is a basically a table that you don't have to create, drop, or declare in anyway. It will be automatically deleted after the batch has ran.
Check out https://web.archive.org/web/20210927200924/http://www.4guysfromrolla.com/webtech/071906-1.shtml for more info.