I have been stuck on a issue about recording system audio in VB.Net for quite some time now. And I can't find any proper ways to do it. I have been able in the past to make it record the Stereo Mix channel. But as we all know: The quality is absolutely horrible.
I have looked into the Bass.net library, but find it incredibly hard to understand. And the licensing agreement does not fit my usage.
Is there a way to have it record the system audio (Audio played by the computer) properly with optimal audio quality where I can save the recorded audio as a .wav or .mp3?
naudio can do that and is disstributed under the Microsoft Public License (Ms-PL). Don't know if the licenses fits your needs but at least naudio will
This will help you accomplish what you need with no third party libraries required.
http://www.codeproject.com/Articles/770246/How-to-record-any-PC-sound-through-WASAPI-and-Audi
Related
The short question: I am wondering if the kinect SDK / Nite can be exploited to get a depth image IN, skeleton OUT software.
The long question: I am trying to dump depth,rgb,skeleton data streams captured from a v2 Kinect into rosbags. However, to the best of my knowledge, capturing the skeleton stream on Linux with ros, kinect v2 isn't possible yet. Therefore, I was wondering if I could dump rosbags containing rgb,depth streams, and then post-process these to get the skeleton stream.
I can capture all three streams on windows using the Microsoft kinect v2 SDK, but then dumping them to rosbags, with all the metadata (camera_info, sync info etc) would be painful (correct me if I am wrong).
It's quite some time ago that I worked with NITE (and I only used Kinect v1) so maybe someone else can give a more up-to-date answer, but from what I remember, this should easily be possible.
As long as all relevant data is published via ROS topics, it is quite easy to record them with rosbag and play them back afterwards. Every node that can handle live data from the sensor will also be able to do the same work on recorded data coming from a bag file.
One issue you may encounter is that if you record kinect-data, the bag files are quickly becoming very large (several gigabytes). This can be problematic if you want to edit the file afterwards on a machine with very little RAM. If you only want to play the file or if you have enough RAM, this should not really be a problem, though.
Indeed it is possible to perform a NiTE2 skeleton tracking on any depth-image-stream.
Refer to:
https://github.com/VIML/VirtualDeviceForOpenNI2/wiki/How-to-use
and
https://github.com/VIML/VirtualDeviceForOpenNI2/wiki/About-PrimeSense-NiTE
With this extension one can add a virtual device which allows to manipulate each pixel of the depth stream. This device can then be used for creation of a userTracker object. As long as the right device name is provided skeleton tracking can be done
\OpenNI2\VirtualDevice\Kinect
but consider usage limits:
NiTE only allow to been used with "Authorized Hardware"
I'm trying to learn how to do some simple audio manipulation in a program (i'll be writing said program for Mac OS X), such as changing the pitch or speed of a song. I've read that OpenAL is something i'd want to look at and work with. But i've also read that Core Audio is useful. I'm not sure what the difference between the two is or how to use either of them in a program. Any guidance/learning tools would be greatly appreciated.
New to Mac OS X, familiar with Windows. Windows has DirectShow, a good number of built-in filters, COM programming, and GraphEdit for very fast prototyping and snooping on the graphs you've constructed in code.
I'm now about to go to the Mac to work with cameras, webcams, microphones, color spaces, files, splitting, synchronization, rendering, file reading, file saving, and many of things I've come to take for granted with DirecShow when putting together applications for live performance. On the Mac side, so far I've found ... nothing! Either I don't know where to look or I'm having the toughest time tying the Mac's reputation for its ease of handling media with a coherent programmatic ability to get in there and start messin' with media manipulatin' building blocks.
I've seen some weak suggestions to use gstreamer or some library for QT but I can't bring myself to believe that this is the Apple way to go. And I've come across some QuickTime documentation but I'm not looking to do transitions, sprites, broadcasting, ...
Having a brain trained on DirectShow means I don't even know how Apple thinks about providing DirectShow-like functionality. That means I don't know the right keywords and don't even know where to look. Books? Bought a few. Now I might be able to write some code that can edit your sister's wedding video (if I can't make decent headway on this topic I may next be asking what that'd be worth to you), but for identifying what filters are available and how to string them together ... nothing. Suggestions?
Video handling is going through a huge transition on the Mac at the moment. QuickTime is very old, but also big and powerful, so it's been undergoing an incremental replacement process for the past 5 years or so.
That said, QTKit is the QuickTime subset (capture, playback, format conversion and basic video editing) which is supported going forward. The legacy QuickTime APIs are still there for the moment, and probably will remain at least until its major features are available elsewhere, but are 32-bit only. For some involved video stuff you may end up needing to use it in places.
At the moment, iOS is ahead of the Mac because it could start from scratch with AV Foundation. The future of the Mac media frameworks will probably either be AV Foundation directly (with QTKit being a lightweight shim over the top) or an extension of QTKit that looks very similar.
For audio there's Core Audio which is on Mac and iOS and isn't going away any time soon. It's quite powerful but somewhat obtuse in places. Luckily online support is very good; the mailing list is an essential resource.
For filters and frame-level processing you've got Core Video as someone else mentioned, as well as Core Image. For motion graphics there's Quartz Composer which includes a graphical editor and a plugin architecture to add your own patches. For programmatic procedural animation and easily mixing rendering models (OpenGL, Quartz, video, etc.) there's Core Animation.
In addition to all of these, of course there's no reason you can't use open source libraries where the built-in stuff doesn't do what you want.
To address your comment below:
In QuickTime (and QTKit), individual data types like audio and video are represented as tracks. It may not be immediately clear that QuickTime can open audio as well as video file formats. A common way to combine audio and video would be:
Create a QTMovie with your video file.
Create a QTMovie with your audio file.
Take the QTTrack object representing the audio and add it to the QTMovie with the video in it.
Flatten the movie, so it doesn't simply contain a reference to the other movie but actually contains the audio data.
Write the movie to disk.
Here's an example from Blender. You'll see how the A/V muxing is done in the end_qt function. There's also some use of Core Audio in there (AudioConverter*). (There's some classic QuickTime export code in quicktime_export.c but it doesn't seem to do audio.)
Hi I have an adobe air 2 project which records some short sounds via the microphone. I am able to save the streams as wav files but require them to be saved as mp3 (For replaying in the flash player).
Does anyone know if this is possible?
If it isn't is there anyway to get the flash player to player audio in wav form?
Any hints appreciated.
If you are using Adobe AIR v2 then you should be looking for a Non-AS3 commandline tool to convert the wav file to mp3. The process is fairly CPU intensive and would take a LONG time in Actionscript even if there was a library out there that accomplished the task (which I haven't heard of).
My suggestion is to include a tool like LAME with you application and pass your wave file to it (essentially running the process in another thread in C). The only downside is providing an executable for each potential OS you'll be deploying to, if you intend on support Windows, Mac, and Linux that could be up to three different Wave->Mp3 commandline tools.
Link for LAME: http://lame.sourceforge.net/
Seems to be possible: http://www.jordansthings.com/blog/?p=5. No ready source, but libraries listed there should help. (I would just decompile it if need be.)
I have a multimedia application that among other things converts video using FFMpeg. Video conversion being the pain that it is, I have in my test suits some tests that check our ability to convert various video formats, with emphasis on sample videos known not to work.
A common problem we've noticed from users is that some videos end up with their audio desynched after being processed, and I am looking for a way to check this in my tests.
Extracting the audio portion of the resulting videos is not a problem.
My best idea so far would be to check the offset of the first non-silence at both the beginning and end and compare each between the two videos, but I'm hoping someone smart has a better idea.
The application language/environment is Java, but since this is for testing, I'm free to use any toolset.
The basic problem is likely that the video and audio are different lengths. Extract the audio and test its length vs. the video length. If they are significantly different (more than maybe .05 sec, I'm not really sure what is detectable as "off"), then there's a problem.
To fix it, re-encode the audio to match the video length, and then put the audio and video back into a container format.