As a note, when setting up the development server on Ubuntu 14.10, I am giving the command:
-3000-N200:/# sudo service nfs-kernel-server restart
It shows me
* Not starting NFS kernel daemon: no exports.
Can any one tall me what does this mean?
It means that you have not added any shares in /etc/exports
Related
I am trying to start minishift on my machine. It successfully creates minishift VM but throws time out error.
Configuration:
Minishift version: v1.34.0+f5db7cb
OS: Windows 10
Hypervisor: Virtual Box v6.0.10
PS C:\WINDOWS\system32> minishift start
-- Starting OpenShift cluster .......................................................................Error during 'cluster up' execution: Error starting the cluster. ssh command error:
command : /var/lib/minishift/bin/oc cluster up --image 'openshift/origin-${component}:v3.11.0' --public-hostname 192.168.99.100 --routing-suffix 192.168.99.100.nip.io --base-dir /var/lib/minishift/base
err : exit status 1
output : Getting a Docker client ...
Checking if image openshift/origin-control-plane:v3.11.0 is available ...
Pulling image openshift/origin-cli:v3.11.0
E0725 17:15:42.919928 5316 helper.go:173] Reading docker config from /home/docker/.docker/config.json failed: open /home/docker/.docker/config.json: no such file or directory, will attempt to pull image docker.io/openshift/origin-cli:v3.11.0 anonymously
Image pull complete
E0725 17:15:44.643860 5316 helper.go:173] Reading docker config from /home/docker/.docker/config.json failed: open /home/docker/.docker/config.json: no such file or directory, will attempt to pull image docker.io/openshift/origin-node:v3.11.0 anonymously
Pulling image openshift/origin-node:v3.11.0
Pulled 5/6 layers, 85% complete
Pulled 6/6 layers, 100% complete
Extracting
Image pull complete
Checking type of volume mount ...
Determining server IP ...
Using public hostname IP 192.168.99.100 as the host IP
Checking if OpenShift is already running ...
Checking for supported Docker version (=>1.22) ...
Checking if insecured registry is configured properly in Docker ...
Checking if required ports are available ...
Checking if OpenShift client is configured properly ...
Checking if image openshift/origin-control-plane:v3.11.0 is available ...
I0725 17:16:20.775520 5316 config.go:40] Running "create-master-config"
Starting OpenShift using openshift/origin-control-plane:v3.11.0 ...
I0725 17:16:31.108342 5316 config.go:46] Running "create-node-config"
I0725 17:16:35.237968 5316 flags.go:30] Running "create-kubelet-flags"
I0725 17:16:36.785234 5316 run_kubelet.go:49] Running "start-kubelet"
I0725 17:16:37.288388 5316 run_self_hosted.go:181] Waiting for the kube-apiserver to be ready ...
E0725 17:21:37.300062 5316 run_self_hosted.go:571] API server error: Get https://192.168.99.100:8443/healthz?timeout=32s: dial tcp 192.168.99.100:8443: connect: connection refused ()
Error: timed out waiting for the condition
Expected result: It should provide me without errors link to open web console
This happens to me sometimes too.
Solutions include:
minishift stop && minishift start (turn it off and on again)
restart Windows (perhaps VBox has corrupted itself again)
More info on my minishift setup is here:
http://divby0.blogspot.com/2019/07/configuring-minishift-for-use-with.html
For what it's worth I use a combination of linux shells in Windows 10 to interact with minishift / docker daemon:
Git Bash (usually the best)
Docker Toolbox (plan B when something won't run in Git Bash shell)
WSL (ubuntu based, plan C in desperation)
My OS is Windows 10 and I am running Docker version 17.06.0-ce-win19. I am trying to set up a container so that it will restart automatically on reboot.
When I use the command:
docker run -it microsoft/nanoserver --restart=always
I’m getting the following error:
docker: Error response from daemon: container 35046c88d2564523464ecabc4d48eb0550115e33acb25b0555224e7c43d21e74 encountered an error during CreateProcess: failure in a Windows system call: The system cannot find the file specified. (0x2) extra info: {"ApplicationName":"","CommandLine":"--restart=always","User":"","WorkingDirectory":"C:\","Environment":{},"EmulateConsole":true,"CreateStdInPipe":true,"CreateStdOutPipe":true,"CreateStdErrPipe":false,"ConsoleSize":[30,120]}.
whereas if I leave out the
--restart=always
everything works fine.
Is there something else I need to do to get --restart options working on Windows?
Parameters shall be coming before image:tag in CLI
So after restarting my httpd redis crashed (due to the number of sudden requests sent via httpd and written on redis) and now when I try to restart redis on my centos 6.5 server I get the following error:
[root#host /]# /usr/sbin/redis-server restart
[1705] 17 Apr 00:30:49 # Fatal error, can't open config file 'restart'
I have also tried to login to redis using redis-cli and I get an error stating the connection to the server failed.
What options do I have to safely restart the server?
From the /src directory where you downloaded and unzipped your redis source, run the following. This is for RHEL based systems.
make install
# (OR)
sudo cp src/redis-server /usr/local/bin/
sudo cp src/redis-cli /usr/local/bin/
I'm trying to run activemq on my ubuntu virtual machine but have constantly been running into issues getting it to start up. I've tried downloading the binary and source with no luck. Currently I have downloaded the source, run "mvn clean install -Dmaven.test.skip=true" and mvn reported successful installation. I then hunted around in my .m2 folder found apache-activemq-5.5.1-bin.tar.gz and extracted it to my home/USERNAME dir and attempted to run "bash bin/activemq start" only to receive the following error.
INFO: Loading '/etc/default/activemq'
INFO: Using java '/usr/bin/java'
INFO: Starting - inspect logfiles specified in logging.properties
and log4j.properties
to get details
bin/activemq: line 370: /usr/bin/java -Xms256M -Xmx256M -Dorg.apache.activemq.UseDedicatedTaskRunner=true
-Djava.util.logging.config.file=logging.properties
-Dcom.sun.management.jmxremote
-Dactivemq.classpath="/home/jacob/activeMq1/apache-activemq-5.5.1/conf;"
-Dactivemq.home="/home/jacob/activeMq1/apache-activemq-5.5.1"
-Dactivemq.base="/home/jacob/activeMq1/apache-activemq-5.5.1"
-jar "/home/jacob/activeMq1/apache-activemq-5.5.1/bin/run.jar" start >/dev/null 2>&1 &
RET="$?"; APID="$!";
echo $APID > /home/jacob/activeMq1/apache-activemq-5.5.1/data/activemq.pid;
echo "INFO: pidfile created : '/home/jacob/activeMq1/apache-activemq-5.5.1/data/activemq.pid' (pid '$APID')";
exit $RET: No such file or directory
Has any one run into this type of error before?
Looks like I'm answering one of my questions again, but maybe this will help someone in the future.
steps.
I ended up getting activemq to work by creating a configuration file via running the command "./bin/activemq setup newConfig" (exclude the quotes)
I then replaced the current config file "activemq" which was located at etc/default/. (I made a backup of the original activemq file before overwriting it with newConfig).
Run "./bin/activemq start" which will create a PID file.
After the file is created re-run "./bin/activemq start" to finally start up the broker.
You can then test the install by navigating to "http://localhost:8161/admin/" or by doing a "netstat -an | grep 61616" if you kept the default ports etc.
I install activemq 5.13 on Debian, download and unzip in /opt, then I go to /opt/apache-activemq-5.13.1/run "./bin/activemq start", then appear this error:
xx#debian:/opt/apache-activemq-5.13.1$ ./bin/activemq start
INFO: Loading '/etc/default/activemq'
INFO: Using java '/usr/bin/java'
INFO: Starting - inspect logfiles specified in logging.properties and log4j.properties to get details
./bin/activemq: 330: ./bin/activemq: "/usr/bin/java" -Djava.util.logging.config.file=logging.properties -Djava.security.auth.login.config=/opt/apache-activemq-5.13.1//conf/login.config -Djava.awt.headless=true -Djava.io.tmpdir="/opt/apache-activemq-5.13.1//tmp" -Dactivemq.classpath="/opt/apache-activemq-5.13.1//conf:/opt/apache-activemq-5.13.1//../lib/:" -Dactivemq.home="/opt/apache-activemq-5.13.1/" -Dactivemq.base="/opt/apache-activemq-5.13.1/" -Dactivemq.conf="/opt/apache-activemq-5.13.1//conf" -Dactivemq.data="/opt/apache-activemq-5.13.1//data" -jar "/opt/apache-activemq-5.13.1//bin/activemq.jar" start >/dev/null 2>&1 &
RET="$?"; APID="$!";
echo $APID > /opt/apache-activemq-5.13.1//data/activemq.pid;
echo "INFO: pidfile created : '/opt/apache-activemq-5.13.1//data/activemq.pid' (pid '$APID')";exit $RET: not found
What I did is to check the Debian version using "uname -a":
Linux debian 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17) x86_64 GNU/Linux
I found my debian is 64 bit system. so I run
./bin/linux-x86-64/activemq start
It shows:
Starting ActiveMQ Broker...
Then I can access the site:http://localhost:8161/admin/ with username "admin" and password "admin"
with Ubuntu 14.04, I had to create a link in /etc/activemq/instances-enabled
sudo ln -s ../instances-available/main/
similar to apache2 setup
then started the server with /etc/init.d/activemq start
sudo is necessary.
bin$ sudo ./activemq start
bin$ sudo ./activemq status
INFO: Loading '/opt/runtime/apache-activemq-5.11.1/bin/env' INFO: Using java '/usr/bin/java' ActiveMQ is running (pid '29887')
Rabbitmq server does not start, saying it's already running:
$: rabbitmq-server
Activating RabbitMQ plugins ...
0 plugins activated:
node with name "rabbit" already running on "android-d1af002161676bee"
diagnostics:
- nodes and their ports on android-d1af002161676bee: [{rabbit,52176},
{rabbitmqprelaunch2254,
59205}]
- current node: 'rabbitmqprelaunch2254#android-d1af002161676bee'
- current node home dir: /Users/Jordan
- current node cookie hash: ZSx3slRJURGK/nHXDTBRqQ==
But, rabbitmqctl seems to think otherwise:
rabbitmqctl -n rabbit status
Status of node 'rabbit#android-d1af002161676bee' ...
Error: unable to connect to node 'rabbit#android-d1af002161676bee': nodedown
diagnostics:
- nodes and their ports on android-d1af002161676bee: [{rabbit,52176},
{rabbitmqctl2462,59256}]
- current node: 'rabbitmqctl2462#android-d1af002161676bee'
- current node home dir: /Users/Jordan
- current node cookie hash: ZSx3slRJURGK/nHXDTBRqQ==
Any takers?
The rabbitmq server was running somewhere but it just couldn't be connected to.
One of the following will mention something about rabbits:
$: ps aux | grep epmd
$: ps aux | grep erl
Kill the process with kill -9 {pid of rabbitmq process}
i was having the same problem then I realized I was not issuing the right command.
./rabbitmqctl stop
this works everytime, although it does take down erlang runtime too. also mind where your config file.
I used rabbitmqctl stop and then restarted using rabbitmq-server as root.
This issue can be caused by two issues:
Rabbit is already running on the server. If that is the case, use the answer you found of killing the currently running process (ps aux | grep rabbit | grep -v grep)
You have changed the IP address of your machine but not changed the /etc/hosts file to reflect the new IP address of the machine.
The more common of the issues is the first, but the harder to find is the second (especially if you have rabbit running on the other machine. If rabbit is installed on the other machine it will look at the old IP address and would see another machine already running rabbitmq and give you the same error. This has caused me grief in the past.
I was having this same error # Win 7, but the solutions above did not worked for me, what did solved was to remove and reinstall the service. Using a console with admin rights:
rabbitmq-service remove
rabbitmq-service install
I hope this might help someone else too
$CD RabbitMQ Server\rabbitmq_server-3.7.8\sbin
rabbitmq-service remove
rabbitmq-service install
Go : windows Services
Find : RabbitMQ and Start it
after this Enable plugin :
rabbitmq-plugins enable rabbitmq_management
In my case under Ubuntu 11.10 it helped to
#rabbitmqctl cluster MASTER SLAVE
#rabbitmqctl start_app
before I always got this error message...
Using admin console, in Win 2012R2 ver 3.5.5 rabbit, got it to work using the remove and install then rabbitmq-server restart
then ctr-c to terminate the job, then I was able to use the windows service console and start the rabbitMq service.
In my case(windows),
1. I just ran the stop service.
2. The started the service.