I know I need to dig the reason why my app is beeping in the code, etc.
But I was wondering, is there a global setting to disable sounds all over my app screens?
this is very little information to go on, but usually your application is beeping when the responder chain comes up with no object that can respond to an event on the screen or keyboard.
For instance, if you type text in an active view and the view doesn't allow for text editing, the view sends the key down event to its super view. For a view this can end by the NSPanel or NSWindow or BSWindow controller. The last responder in the chain invokes the noResponderFor: method, which, when not implemented, will give a beep. If you don't want it to beep, override this method to do something else.
Based on your information I can't give you any other information.
Related
I have a Cocoa app with a ManMenu.xib, in which the main menu is stored and different other subviews in several xibs handling different tasks of my app. So how do I make my sub-xibs or rather their NSViewControllerController receive actions from the menu?
i have an idea but I don't know if it's the right way: I subclass NSViewController and add some actions like - (IBAction)undo or - (IBAction)redo use instances of it as the files owner. Further I add a pointer to my app delegate pointing at the actual view or rather its controller and the menu sends the action to that pointer.
Wise solution?
You should hook up your menu items to the First Responder. Their action messages will then travel along the responder chain until they reach something that responds to them.
You'll need to make sure your view controller is in the responder chain by setting it as the next responder of something else in the responder chain. I would suggest the window controller.
Speaking of the window controller, you probably should be handling undo there rather than in a view controller—it would be confusing for different views in the same window to have different undo lists. The only exception I can think of would be if the controlled views correspond to document tabs, like in Photoshop or Xcode.
Is there a way to check if a NSWindow is visible or not? I want to display a sheet controller once the first window of my app became visible (the animation on 10.7 ended and the user can see the window!). If I just show the sheet in windowDidLoad, it results in a stupid looking animation (sheet rolling out, window popping out from the back). I know that NSWindowDelegate provides two methods which are invoked when a window either became the key window or the main window, however, this doesn't have to mean that the window is already fully visible at the time. This is even more noticeable on Lion where windows tend to pop up with this stupid animation.
I would go for something like this:
if ([myWindow isVisible]) {
// Do stuff
}
Or an an observer for this key path to be notified when the change occurs.
For what it's worth, you can also bind to the window.visible property. Xcode 4 may squawk at you, saying it's not a bindable property, but it will work.
This can be useful if you are trying enable/disable show/hide NSStatusItem based on whether the window is visible, as well as other approaches.
i.e. in Interface Builder:
Bind to: App Delegate
Model Key Path: self.window.visible
It seems like NSSlider in Cocoa does not provide a delegate to receive an event like Value Changed for a UISlider.
How can I get the value of an NSSlider continuously and display it in an NSTextField, for example?
You need to research Cocoa's Target/Action mechanism. This is a basic Cocoa concept you'll need to understand. The slider (and any other control) can be given a target (some controller object) and an action (the method to call against that controller object).
The action is fired when the user stops dragging by default. Check the slider's Continuous property in Interface Builder to cause it to trigger the action as you're sliding it.
One advantage of using the timer approach is that it works for the case of using the keyboard rather than the mouse to adjust the slider. If the user has "Full Keyboard Access" turned on in System Preferences, they can use the Tab key to give the slider focus. They can then hold down an arrow key so that autorepeat kicks in, whereupon you have a similar situation to dragging with the mouse: the target/action is firing repeatedly, and you want to wait for a moment of calm before saving to the database.
You do need to be careful not to delete your NSTimer prematurely. For example, if the user quits the app during those couple of seconds you probably want to "flush" the slider value to the database before terminating the process.
Programmatical solution based on the answer of Joshua Nozzi:
Swift
slider.isContinuous = true
Objective-C
slider.continuous = YES;
Im looking for some help regarding to put a save like confirmation if some changes where made to a UITextField and UISegmentedControl.
Can I prevent the UINavigationController from pop the view? And then pop based on buttons in a AlertView?
I use the UITextField and UISegmented control to POST data to a webservice.
I perhaps need to use a modalView for this? but wanted first to see if someone have another idea, because I would like to keep navigation clicks down if possible.
Any suggestions for this?
Thanks,
Why not just using a UIAlertView?
EDIT: On second thought, and re-reading your question + comment, I would recommend to use a Modal View with classics OK/Cancel buttons + a UIAlertView(s) for confirmation(s). (UIAlertView "poping" on OK/Cancel is easy to do via UIAlertViewDelegate)
That's what Modal views are for, block UI until some user action has been completed. Like a form. This is how I do all my forms, and how Apple does (just look at the create mail screen for an example, or any form of iOS apps)
Adding a "Magical" action requiring user interaction on the back button of a navigation controller is bad in terms of user experience, if you hit back, you expect the view to pop, nothing else. I would then be surprised if Apple SDK even allows to cancel that event...
You can do what you would like without the need of a modal view.
First, you can use your text field's UITextFieldDelegate to set a flag in your controller when the field content is modified. You can reset this flag when the data is sent out.
Then you could override your UIViewContorller's viewWillDisappear to show an alert to the user in case new data have not been posted at the moment the view is going to disappear and give him the possibility of sending it to the server. This method will be called when you move to a different controller in your navigation UI, and you will not have a chance to "reject" the operation.
Hi need a little help, i have a window which is set to always show in the top right corner but it is not set to always key. The window has a few buttons on it and when a button is clicked the window becomes key, but what i want it to do is when a button is clicked i want the window to remove itself from being key.
So ideally the window becomes key when a button is clicked and in the method which the button calls i want to write a statement which will then perform the action of the button and remove the window from key.
However the window is declared under the app delegate and the method linked to the button is declared in a separate header file.
Anyone have any ideas how i can do this, any help would be much appreciated.
Thanks in advance, Sami.
There are a few solutions depending on the architecture of your application.
Send [[NSApp mainWindow] makeKeyWindow], which will make the main window become key.
Your application delegate could have a reference to the main window. In the action method that handles the button click, you could ask the application delegate to make the main window become key. The application delegate would send [mainWindow makeKeyWindow].
Your application delegate could have a reference to the window controller that manages the main window. In the action method that handles the button click, you could ask the application delegate to make the main window become key. The application delegate would ask the main window controller to do that, and the main window controller would send [[self window] makeKeyWindow].
Your application delegate could listen to the NSWindowDidResignKeyNotification notification and keep a reference to the last window that resigned being key. In the action method that handles the button click, you could ask the application delegate to return key status to that previous window. The application delegate would need to ignore NSWindowDidResignKeyNotification notifications when the window is your auxiliary window. This solution is better when there’s no single main window.
If the first solution is not applicable, a) your application delegate could conform to a protocol that declares a method responsible for restoring key status to the proper window, or b) your action method could post a notification informing the application that your action method has completed, and have the application delegate listen to that notification and restore key status to the proper window.
Note that even though I’ve suggested that the application delegate would implement the behaviour of restoring key status, other objects could be responsible for that. This is particularly easier when notifications are used since there’s no need to grab a reference to the object that will restore key status due to the inherent loose coupling provided by notifications.