I am trying to configure WCF SVC with the following configuration. Its not fetching the messages from the window server service bus topic/subscrition.
when i host and configure the same dynamically through code, it works .
<bindings>
<customBinding>
<binding name="messagingBinding">
<textMessageEncoding messageVersion="None" writeEncoding="utf-8" />
<netMessagingTransport/>
</binding>
</customBinding>
</bindings>
<behaviors>
<endpointBehaviors>
<behavior name="securityBehavior">
<transportClientEndpointBehavior>
<tokenProvider>
<windowsAuthentication domain="****" password="*****" userName="****">
<stsUris>
<stsUri value="https://{machine/domain}:9355/SampleNamespace" />
</stsUris>
</windowsAuthentication>
</tokenProvider>
</transportClientEndpointBehavior>
</behavior>
</endpointBehaviors>
<services>
<service name="Myservice.IntegrationService">
<endpoint name="AccountingEndPoint"
listenUri="sb://{machine/domain}:9355/SampleNamespace/accounting/subscriptions/sub"
address="sb://{machine/domain}:9355/SampleNamespace/accounting"
binding="customBinding"
bindingConfiguration="messagingBinding"
contract="Myservice.IAccounting"
behaviorConfiguration="securityBehavior" />
</service>
</services>
[ServiceContract]
public interface IAccounting
{
[OperationContract(IsOneWay = true, Action = "*"), ReceiveContextEnabled(ManualControl = true)]
void AccountingReader(Message message);
}
Related
I need a service with two endpoints.When I create service with 1 endpoint point, it works fine but when I add 2 endpoints it complains endpoint not found.
Endpoint without address extension works fine but not with address ('download')
Here is my configuration:
Server
<serviceBehaviors>
<behavior name="MessageStreamBehavior">
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="true" httpHelpPageEnabled="true" />
<dataContractSerializer maxItemsInObjectGraph="2147483647"/>
</behavior>
</serviceBehaviors>
</behaviors>
<bindings>
<basicHttpBinding>
<!--stream for video upload-->
<binding name="httpLargeMessageStream"
maxReceivedMessageSize="4294967295"
openTimeout="00:01:00" closeTimeout="00:30:00" sendTimeout="00:30:00"
transferMode="Streamed">
<security mode="Transport" />
</binding>
</basicHttpBinding>
<webHttpBinding>
<!--stream for video download-->
<binding name="webHttpLargeMessageStream"
maxReceivedMessageSize="4294967295"
openTimeout="00:01:00" closeTimeout="00:30:00" sendTimeout="00:30:00"
transferMode="Streamed">
<security mode="Transport" />
</binding>
</webHttpBinding>
</bindings>
<services>
<!--service for streamservice; video upload and download-->
<service name="Trigger.CSSD.Service.Services.MediaService" behaviorConfiguration="MessageStreamBehavior" >
<endpoint name="restDownloadHttpStream"
behaviorConfiguration="webHttpBehavior" address="download"
binding="webHttpBinding" bindingConfiguration="webHttpLargeMessageStream"
contract="Trigger.CSSD.Service.Services.IDownloadMediaService" />
<endpoint name="uploadHttpStream"
binding="basicHttpBinding" bindingConfiguration="httpLargeMessageStream"
contract="Trigger.CSSD.Service.Services.IUploadMediaService" />
</service>
</services>
Client
<endpoint address="https://cssd-services:44300/MediaService.svc"
binding="basicHttpBinding" bindingConfiguration="basicHttpStream"
contract="MediaService.IUploadMediaService" name="basicHttpStream" />
<endpoint address="https://cssd-services:44300/MediaService.svc/download"
binding="webHttpBinding" bindingConfiguration="webHttpStream" behaviorConfiguration="webHttpBehavior"
contract="MediaService.IDownloadMediaService" name="webHttpStream" />
</client>
SERVICE
[ServiceContract]
public interface IDownloadMediaService
{
[OperationContract]
// [ContentType("video/mp4")]
// [WebGet(UriTemplate = "media/{name}")]
Stream GetMedia(String name);
}
[ServiceContract]
public interface IUploadMediaService
{
//http://msdn.microsoft.com/en-us/library/ms751463.aspx
[OperationContract]
FileUploadResponseMessage UploadFile(FileUploadMessage message);
}
[AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Required)]
public class MediaService : IDownloadMediaService, IUploadMediaService
{......
}
ANy suggestion? Thanks.
I have a service with ComplexType in the Uri Template Parameter, I have Override the CanConvert() and ConvertStringToValue() methods to the class MyQueryStringConverter.
I need to add that behavior to the web.config file.
Here is the Behavior
public class MyWebHttpBehavior : WebHttpBehavior
{
protected override QueryStringConverter GetQueryStringConverter(OperationDescription operationDescription)
{
return new MyQueryStringConverter();
}
}
Here Is the Configuration File :
<system.serviceModel>
<bindings>
<webHttpBinding>
<binding name="webHttp"
maxReceivedMessageSize="20000000" >
<security mode="None">
<transport clientCredentialType = "None"/>
</security>
</binding>
</webHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="mexBehaviour">
<serviceMetadata httpGetEnabled="true"/>
<useRequestHeadersForMetadataAddress>
<defaultPorts>
<add scheme="http" port="80" />
</defaultPorts>
</useRequestHeadersForMetadataAddress>
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="web">
<webHttp/>
</behavior>
</endpointBehaviors>
</behaviors>
<services>
<service name="Service.Service1" behaviorConfiguration="mexBehaviour">
<endpoint address="" binding="webHttpBinding" contract="Service.IService1" bindingConfiguration="webHttp" behaviorConfiguration="web"/>
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange">
</endpoint>
</service>
</services>
</system.serviceModel>
Please help how to add that behavior.
First, you must register your behavior, using behaviorExtensions element in your configuration file:
<system.serviceModel>
<extensions>
<behaviorExtensions>
<add name="MyWebHttpBehavior"
type="FullNameSpace.MyWebHttpBehavior, MyWebHttpBehavior.AssemblyName, Version=1.0.0.0, Culture=neutral" />
</behaviorExtensions>
</extensions>
Where:
"FullNameSpace.MyWebHttpBehavior" is your class with full namespace,
"MyWebHttpBehavior.AssemblyName" is your assembly name with extension
where your class is compiled.
"1.0.0.0" is the version of your assembly
"neutral" is your Culture. Change if any special Culture is required
Secound, declare your behavior:
<behaviors>
<endpointBehaviors>
<behavior name="customMyWebHttpBehavior">
<webHttp/>
<MyWebHttpBehavior/>
</behavior>
</endpointBehaviors>
<behaviors>
Next, add to the binding:
<bindings>
<webHttpBinding>
<binding name="webHttp"
maxReceivedMessageSize="20000000" >
<security mode="None">
<transport clientCredentialType = "None"/>
</security>
</binding>
<MyWebHttpBehavior />
</webHttpBinding>
</bindings>
And finally, set the behavior to your service endpoint:
<endpoint address="" binding="webHttpBinding" contract="Service.IService1" bindingConfiguration="webHttp" behaviorConfiguration="customMyWebHttpBehavior"/>
I've copied this configuration of a service I've developed and changed the names to fit your class/configuration, but check if I did not wrote anything wrong.
I've used this link as base to setup my configuration: Custom Behavior won't register in my web.config
Hope it helps.
I have a WCF Service that currently uses basicHttpBinding, userNamePasswordValidationMode and TransportWithMessageCredential, Here is my Configuration:
<behavior name="Secure">
<serviceMetadata httpsGetEnabled="true" httpGetEnabled="false" />
<serviceDebug includeExceptionDetailInFaults="true"/>
<serviceCredentials>
<userNameAuthentication userNamePasswordValidationMode="Custom"
customUserNamePasswordValidatorType="Kestrel.MIS3.Server.Services.Security.LoginAuthentication, Kestrel.MIS3.Server.Services" />
</serviceCredentials>
<serviceAuthorization principalPermissionMode="Custom">
<authorizationPolicies>
<add policyType="Kestrel.MIS3.Server.Services.Security.AuthorizationPolicy, Kestrel.MIS3.Server.Services"/>
</authorizationPolicies>
</serviceAuthorization>
<behaviour>
<services>
<service name="Kestrel.MIS3.Server.Services.UserService" behaviorConfiguration="Secure">
<endpoint address=""
binding="wsHttpBinding"
bindingConfiguration="wsSecure"
contract="Kestrel.MIS3.Server.Services.IUserService" />
<endpoint address="mex"
binding="mexHttpsBinding"
contract="IMetadataExchange" />
</service>
</services>
<wsHttpBinding>
<binding name="wsSecure">
<reliableSession enabled="true"/>
<security mode="TransportWithMessageCredential">
<message clientCredentialType="UserName" />
</security>
</binding>
</wsHttpBinding>
I want to be able to use a Session so that when an Instance of the Service is created I dont need to look up the user details evertime. Is this possible?
I have marked the Services with the following but with no luck:
[ServiceContract(SessionMode = SessionMode.Required)]
public interface IUserService
[ServiceBehavior(InstanceContextMode = InstanceContextMode.PerSession)]
public class UserService : ServiceBase, IUserService
I have specified the service contract to require the session.
[ServiceContract(SessionMode = SessionMode.Required)]
public interface ITicketSales
{
}
The service decorated like this:
[ServiceBehavior(InstanceContextMode = InstanceContextMode.PerSession, ConcurrencyMode = ConcurrencyMode.Single)]
public class TicketSalesService : ITicketSales
{
}
Here is my App.config file:
<system.serviceModel>
<services>
<service name="InternetRailwayTicketSales.TicketSalesImplementations.TicketSalesService" behaviorConfiguration="defaultBehavior">
<host>
<baseAddresses>
<add baseAddress = "https://localhost/TicketSales/"></add>
</baseAddresses>
</host>
<endpoint address="MainService" binding="wsHttpBinding" bindingConfiguration="wsSecureConfiguration"
contract="InternetRailwayTicketSales.TicketSalesInterface.ITicketSales" />
<endpoint address="mex" binding="mexHttpsBinding"
contract="IMetadataExchange"/>
</service>
</services>
<bindings>
<wsHttpBinding>
<binding name="wsSecureConfiguration">
<security mode="Transport">
<transport clientCredentialType="None"></transport>
</security>
</binding>
</wsHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="defaultBehavior">
<serviceThrottling maxConcurrentInstances="5000" maxConcurrentSessions="5000"/>
<serviceMetadata httpGetEnabled="false" httpsGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="True" />
</behavior>
</serviceBehaviors>
</behaviors>
When I press F5 I receive the error message "Contract requires Session, but Binding ‘WSHttpBinding’ doesn’t support it or isn’t configured properly to support it."
I really need the channel which supports SSL and requires session.
You can support sessions by enabling message security:
<binding name="wsHttpSecureSession">
<security>
<message establishSecurityContext="true"/>
</security>
</binding>
If you need to go with transport security you may need to specify a client credential type
I have a web service in asp.net running and everything works fine. Now I need to access some methods in that web-service using SSL. It works perfect when I contact the web-service using http:// but with https:// I get "There was no endpoint listening at https://...".
Can you please help me on how to set up my web.config to support both http and https access to my web service. I have tried to follow guidelines but I can't get it working.
Some code:
My TestService.svc:
[ServiceContract(Namespace = "")]
[AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)]
public class TestService
{
[OperationContract]
[WebGet(ResponseFormat = WebMessageFormat.Json)]
public bool validUser(string email) {
return true;
}
}
My Web.config:
<system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
<behaviors>
<endpointBehaviors>
<behavior name="ServiceAspNetAjaxBehavior">
<enableWebScript />
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior name="ServiceBehavior">
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
<behavior name="">
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="false" />
</behavior>
</serviceBehaviors>
</behaviors>
<services>
<service behaviorConfiguration="ServiceBehavior" name="TestService">
<endpoint address="" behaviorConfiguration="ServiceAspNetAjaxBehavior"
binding="webHttpBinding" bindingConfiguration="ServiceBinding"
contract="TestService" />
</service>
</services>
<bindings>
<webHttpBinding>
<binding name="ServiceBinding" maxBufferPoolSize="1000000" maxReceivedMessageSize="1000000">
<readerQuotas maxDepth="1000000" maxStringContentLength="1000000" maxArrayLength="1000000" maxBytesPerRead="1000000" maxNameTableCharCount="1000000"/>
</binding>
</webHttpBinding>
</bindings>
</system.serviceModel>
Instead of using the webHttpBinding, try creating a customBinding instead:
<customBinding>
<binding name="poxBindingHttps" closeTimeout="00:00:20">
<textMessageEncoding writeEncoding="utf-8" />
<httpsTransport manualAddressing="true"/>
</binding>
<binding name="poxBindingHttp" closeTimeout="00:00:20">
<textMessageEncoding writeEncoding="utf-8" />
<httpTransport manualAddressing="true"/>
</binding>
</customBinding>
You'll also need to setup the webHttpBehavior like so:
<behaviors>
<endpointBehaviors>
<behavior name="ajaxBehavior">
<enableWebScript/>
<webHttp/>
</behavior>
</endpointBehaviors>
</behaviors>
And finally, your service & endpoint:
<services>
<service name="TestService">
<endpoint name="sslDefault" address="" binding="customBinding" bindingConfiguration="poxBindingHttps" behaviorConfiguration="ajaxBehavior" contract="TestService"/>
<endpoint name="noSslDefault" address="" binding="customBinding" bindingConfiguration="poxBindingHttp" behaviorConfiguration="ajaxBehavior" contract="TestService"/>
</service>
</services>
Hopefully that works out for you in creating an SSL endpoint
It sounds like there is more an issue with IIS no listening on port 443 (The port used for HTTPS). Check IIS that there is a certificate installed and that it is listening on the secure port.